Synthesis of immunomagnetic nanoparticles and their application in the separation and purification of CD34 hematopoietic stem cells

The silica-coated superparamagnetic nanoparticles with the uniform diameter of about 60 nm were synthesized by reverse microemulsions method. And the magnetic nanoparticles were modified with N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPS). The immunomagnetic nanoparticles were then successfully prepared by covalently immobilizing anti-CD34⁺ monoclonal antibodies to the surface of amino silane modified magnetic particles. The cell separation results showed that the synthesized immunomagnetic nanoparticles could rapidly and conveniently separate the CD34⁺ cells with high efficiency and specificity than normal ones. The surface morphology of separated target cells was examined by scanning electron microscope (SEM). Atomic force microscope (AFM) also characterized the magnetic materials on the surface of the separated target cells for the first time, which further confirmed that the target cells were separated by the immunomagnetic nanoparticles. The viability of the separated cells was studied by culturing method and Beckman Vi-cell viability analyst. Therefore, our experiments provided a new, direct, rapid mode to separate target cells.     

The role of copper ions on the structural and magnetic characteristics of MgZn ferrite nanoparticles and thin films

In this study Cu_xMg_0.5−xZn_0.5Fe₂O₄ (x=0-0.5) nanoparticles and thin films were prepared by sol-gel processing. The morphologies of nanoparticles were observed by transmission electron microscope (TEM). The Mössbauer spectroscopy (MS) was employed to determine the site preference of the constitutive elements. Magnetic dynamics of the nanoparticles was studied by the measurement of AC magnetic susceptibility versus temperature at different frequencies. The phenomenological Néel-Brown and Vogel-Fulcher models were employed to distinguish between interacting or non-interacting system. Results exhibited that there is strong interaction between fine particles. X-ray diffraction (XRD) patterns of the thin films indicate the formation of single-phase cubic spinel structure. Atomic force microscope (AFM) was employed to evaluate the surface morphologies of the prepared thin films. Vibrating sample magnetometer (VSM) was employed to probe magnetic properties of samples. It was found that with an increase in the amount of copper, the saturation of magnetization and initial permeability increase.     

Effect of different magnetic nanoparticle coatings on the efficiency of stem cell labeling

Maghemite nanoparticles with various coatings were prepared by the coprecipitation method and characterized by transmission electron microscopy, dynamic light scattering and IR in terms of morphology, size, polydispersity and surface coating. The labeling efficiency and the viability of both rat and human mesenchymal stem cells labeled with Endorem^®, poly(l-lysine) (PLL)-modified Endorem^®, uncoated γ-Fe₂O₃, d-mannose-, PLL- or poly(N,N-dimethylacrylamide) (PDMAAm)-coated γ-Fe₂O₃ nanoparticles were compared. Coated γ-Fe₂O₃ nanoparticles labeled cells better than did Endorem^®. High relaxation rates and in vitro magnetic resonance imaging of cells labeled with coated nanoparticles showed clearly visible contrast compared with unlabeled cells or cells labeled with Endorem^®.     

Application of citrate-stabilized gold-coated ferric oxide composite nanoparticles for biological separations

Gold-coated magnetic nanoparticles were synthesized with size ranging from 15 to 40 nm using sodium citrates as the reducing agent. Oxidized magnetites (Fe₃O₄) fabricated by co-precipitation of Fe²⁺ and Fe³⁺ in strong alkaline solution were used as magnetic cores. The structures of gold (Au) shell and magnetic core (Au–Fe) were studied by transmission electron microscopy (TEM) image and energy dispersive spectroscopy (EDS) spectrum. Results from high-resolution X-ray diffraction (HR XRD) show that the Au–Fe oxide nanoparticles have a face-centered cubic shape with the crystalline faces of {1 1 1}. The Au-coated magnetic nanoparticles exhibited a surface plasmon resonance peak at 528 nm. The nanoparticles are well dispersed in distilled water. A 3000 G permanent magnet was successfully used for the separation of the functionalized nanoparticles. Magnetic properties of the nanoparticles were determined by magnetic force microscope (MFM) in nanometric resolution and vibrating sample magnetometer (VSM). Magnetic separation of biological molecules using Au-coated magnetic oxide composite nanoparticles was examined after attachment of protein immunoglobulin G (IgG) through electrostatic interactions. Using this method, separation was achieved with a maximum yield of 35% at an IgG concentration of 400 ng/ml.     

Microfabricated magnetic sifter for high-throughput and high-gradient magnetic separation

A microfabricated magnetic sifter has been designed and fabricated for applications in biological sample preparation. The device enables high-throughput, high-gradient magnetic separation of magnetic nanoparticles by utilizing columnar fluid flow through a dense array (∼5000/mm²) of micropatterned slots in a magnetically soft membrane. The potential of the sifter for separation of magnetic nanoparticles conjugated with capture antibodies is demonstrated through quantitative separation experiments with CD138-labeled MACS nanoparticles. Capture efficiencies ranging from 28% to 37% and elution efficiencies greater than 73% were measured for a single pass through the sifter.     

Preparation and characterization of Fe3O4 magnetic composite microspheres covered by a P(MAH-co-MAA) copolymer

A magnetic core–shell-layered polymer microsphere (MPS) was successfully synthesized by a dispersion polymerization route, where the modified Fe₃O₄ nanoparticles (MFN) were used as a core, while poly(maleic anhydride-co-methacrylic acid) P(MAH-co-MAA) as a shell was covered on the surface of the Fe₃O₄ nanoparticles. Environmental scanning electron microscope (ESME) and transmission electron microscope (TEM) measurements indicate that the magnetic P(MAH-co-MAA)/Fe₃O₄ composite microspheres assume sphericity and have a novel core–shell-layered structure. The crystal particle sizes of the unimproved Fe₃O₄ and the MFN samples vary from 8 to 16 nm in diameter, and the average size is about 10.6 nm in diameter. The core–shell magnetic composite microspheres can be adjusted by changing the stirring speed. Since multiple Fe₃O₄ cores were coated with a proper percentage of P(MAH-co-MAA) copolymers, and therefore lower density was acquired for the MPS, which improved sedimentation and dispersion behavior. The saturated magnetization of pure Fe₃O₄ nanoparticles reaches 48.1 emu g⁻¹ and the value for composite nanoparticles was as high as 173.5 emu g⁻¹. The nanoparticles show strong superparamagnetic characteristics and can be expected to be used as a candidate for magnetism-controlled drug release.     

T1 and T2 relaxivities of succimer-coated MFe2O4 (M=Mn, Fe and Co) inverse spinel ferrites for potential use as phase-contrast agents in medical MRI

Superparamagnetic MFe₂³⁺O₄ (M=Mn²⁺, Fe²⁺ and Co²⁺) inverse spinel ferrite (ISF) nanoparticles with narrow size distribution having average diameters of 6-8 nm were synthesized by a diol reduction of organic metals and the surface was modified to be hydrophilic by coating with succimer. Magnetic resonance imaging (MRI) contrast enhancement by dipolar coupling defined interactions between the synthesized ISFs and protons in the bulk water was investigated with initial susceptibility, magnetization and anisotropy of the succimer-coated ISFs. The relaxivity ratios, r₂/r₁, for MnFe₂O₄, Fe₃O₄ and CoFe₂O₄ were measured to be 12.2, 23.1 and 62.3, respectively, which demonstrate the potential usefulness of these magnetic nanoparticles as T₂ contrast agents for MRI.     

Evaluation of the impact of chitosan/DNA nanoparticles on the differentiation of human naive CD4+ T cells

Chitosan (CS) is one of the most widely studied polymers in non-viral gene delivery since it is a cationic polysaccharide that forms nanoparticles with DNA and hence protects the DNA against digestion by DNase. However, the impact of CS/DNA nanoparticle on the immune system still remains poorly understood. Previous investigations did not found CS/DNA nanoparticles had any significant impact on the function of human and murine macrophages. To date, little is known about the interaction between CS/DNA nanoparticles and naive CD4⁺ T cells. This study was designed to investigate whether CS/DNA nanoparticles affect the initial differentiation direction of human naive CD4⁺ T cells. The indirect impact of CS/DNA nanoparticles on naive CD4⁺ T cell differentiation was investigated by incubating the nanoparticles with human macrophage THP-1 cells in one chamber of a transwell co-incubation system, with the enriched human naive CD4⁺ T cells being placed in the other chamber of the transwell. The nanoparticles were also co-incubated with the naive CD4⁺ T cells to explore their direct impact on naive CD4⁺ T cell differentiation by measuring the release of IL-4 and IFN-?? from the cells. It was demonstrated that CS/DNA nanoparticles induced slightly elevated production of IL-12 by THP-1 cells, possibly owing to the presence of CpG motifs in the plasmid. However, this macrophage stimulating activity was much less significant as compared with lipopolysaccharide and did not impact on the differentiation of the naive CD4⁺ T cells. It was also demonstrated that, when directly exposed to the naive CD4⁺ T cells, the nanoparticles induced neither the activation of the naive CD4⁺ T cells in the absence of recombinant cytokines (recombinant human IL-4 or IFN-??) that induce naive CD4⁺ T cell polarization, nor any changes in the differentiation direction of naive CD4⁺ T cells in the presence of the corresponding cytokines.     

Preparation and characterization of surface modified γ-Fe2O3 (maghemite)-silica nanocomposites used for the purification of benzaldehyde lyase

γ-Fe₂O₃ (maghemite)-silica nanocomposite particles were synthesized using a sol-gel method. The condensation products of 3-glycidoxy propyltrimethoxy silane (GPTMS) and nitrilotriacetic acid (NTA) were introduced onto the surfaces of the γ-Fe₂O₃-silica nanocomposite particles and subsequently, these modified surfaces were complexed with cobalt (Co⁺²) metal ions. A possibility of using these surface modified γ-Fe₂O₃-silica particles for the purification of 6×histidine tagged recombinant benzaldehyde lyase (BAL, EC 4.1.2.38) based on magnetic separation was investigated. X-ray diffraction (XRD), thermal analysis, and vibrating sample magnetometry (VSM) methods were used to characterize the surface modified superparamagnetic γ-Fe₂O₃ (maghemite)-silica nanoparticles. XRD (Scherer's equation) results indicate that the primary particle size of maghemite was around 11 nm. Magnetic characterization results confirmed that the γ-Fe₂O₃ (maghemite)-silica nanoparticles were superparamagnetic. According to sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) results, these superparamagnetic nanoparticles specifically capture 6×His-tagged BAL from crude extract of Escherichia coli (E. coli) BL21(DE3)pLysS/BAL_HIS. This study shows that the surface modified γ-Fe₂O₃ (maghemite)-silica nanoparticles are eligible for immobilized metal-ion affinity adsorption for histidine tagged recombinant proteins with its high capacity (3.16±0.4 mg/g) and selectivity.     

Effects of impurity Na ions on the structural and magnetic properties of Ni-Zn-Cu ferrite powders: An improvement for chemical coprecipitation method

Ni-Zn-Cu ferrite powders with nominal composition Ni_0.4−xZn_0.6Cu_xFe₂O₄ (x=0.00-0.20) were prepared via chemical coprecipitation method. X-ray diffractometer, vibrating sample magnetometer, scanning electron microscopy, inductively coupled plasma-atomic emission spectrometry and energy dispersive spectrum were used to study the effects of impurity Na⁺ ions on the structural and magnetic properties. As a result, it was found that the impurity Na⁺ ions affect the crystalline structures and magnetic properties greatly. Moreover, the heterogeneous distribution of impurity Na⁺ ions and the formation of Na compounds retard the phase formation and the grain growth of specimens. Our study also reveals that for the chemical coprecipitation method, a second washing process introduced after drying can eliminate the impurity Na⁺ ions effectually and thus helps in the formation of single-phase structure and the growth of grains, which is very important for the improvement of magnetic properties and the preparation of ferrites via chemical coprecipitation method.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

Indium-substitution and indium-less case effects on structural and magnetic properties of yttrium-iron garnet

The effect of indium (In) substitution in the dynamics of structure and ferrimagnetism of yttrium iron garnet (YIG) employing sintering temperature as a temporary agent of composition and structural changes was reported in this study. The nanoparticles of YIG powder samples with various In content (x=0.0–0.4) were prepared via the mechanical alloying (MA) technique. A brief, yet revealing characterization of the samples was carried out via transmission electron microscope, X-ray diffraction, Raman spectroscopy, B–H Hysteresisgraph, and LCR-metre. The X-ray diffraction analysis of the samples prepared via the MA indicates the formation of single phase YIG structure at much lower sintering temperature than that in the conventional ceramic technique. The lattice constant increases as In content increases which obeys Vegard's Law due to the larger In³⁺ ions replacing the smaller Fe³⁺ ions. The saturation induction increased reaching about 699.1 G for x=0.3 and decreased with further In substitution. Three stages of ordered magnetism formation were identified which attributed to development of crystallinity and larger grains for magnetic domain accommodation. The Curie temperature shows a decrement in their values with In content due to weakening of superexchange interactions. Raman shifts from 268.1 to 272.2 cm⁻¹ with increasing In content were observed due to stress developed in the YIG crystal structure.     

Surface-modified antibacterial TiO2/Ag nanoparticles: Preparation and properties

Studies were performed on surface modification of antibacterial TiO₂/Ag⁺ nanoparticles by grafting γ-aminopropyltriethoxysilane (APS). The interfacial structure of the modified particles was characterized by Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and thermogravimetric analysis. The thickness of the surface layer was determined by using Auger electron spectroscopy (AES). The results show that APS is chemically bonded to the surface of antibacterial TiO₂/Ag⁺ nanoparticles. Furthermore, the modified particles were mixed in PVC to prepare composites whose antibacterial property was investigated. The results suggest that surface modification has no negative effect on antibacterial activity of TiO₂/Ag⁺ nanoparticles and PVC-TiO₂/Ag⁺ composites exhibits good antibacterial property.     

Magnetic and dielectric properties of alkaline earth Ca and Ba ions co-doped BiFeO3 nanoparticles

Ca²⁺ and Ba²⁺ ions co-doped BiFeO₃ nanoparticles, Bi_0.8Ca_0.2−xBa_xFeO₃ (x=0-0.20), were prepared by a sol-gel method. The phase structure, grain size, dielectric and magnetic properties of the prepared samples were investigated. The results showed that the lattice structure of the nanoparticles transformed from rhombohedral (x=0) to orthorhombic (x=0.07-0.19) and then to tetragonal (x=0.20) with x increased. The dielectric properties of the nanoparticles were affected by the properties of the substitutional ions as well as the crystalline structure of the samples. The magnetic properties of the nanoparticles were greatly improved and the T_N of the nanoparticles was obviously increased. All the Ca²⁺ and Ba²⁺ ions co-doped BiFeO₃ nanoparticles presented the high ratio of M_r/M from 0.527 to 0.571 and large coercivity from 4.335 to 5.163 KOe.     

Synthetic and biogenic magnetite nanoparticles for tracking of stem cells and dendritic cells

Accurate delivery of cells to target organs is critical for success of cell-based therapies with stem cells or immune cells such as antigen-presenting dendritic cells (DC). Labeling with contrast agents before implantation provides a powerful means for monitoring cellular migration using magnetic resonance imaging (MRI). In this study, we investigated the uptake of fully synthesized or bacterial magnetic nanoparticles (MNPs) into hematopoietic Flt3⁺ stem cells and DC from mouse bone marrow. We show that (i) uptake of both synthetic and biogenic nanoparticles into cells endow magnetic activity and (ii) low numbers of MNP-loaded cells are readily detected by MRI.     

Investigate the ultrasound energy assisted adsorption mechanism of nickel(II) ions onto modified magnetic cobalt ferrite nanoparticles: Multivariate optimization

In present study, magnetic cobalt ferrite nanoparticles modified with (E)-N-(2-nitrobenzylidene)-2-(2-(2-nitrophenyl)imidazolidine-1-yl) ethaneamine (CoFe₂O₄-NPs-NBNPIEA) was synthesized and applied as novel adsorbent for ultrasound energy assisted adsorption of nickel(II) ions (Ni²⁺) from aqueous solution. The prepared adsorbent characterized by Fourier transforms infrared spectroscopy (FT-IR), transmission electron microscope (TEM), vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). The dependency of adsorption percentage to variables such as pH, initial Ni²⁺ ions concentration, adsorbent mass and ultrasound time were studied with response surface methodology (RSM) by considering the desirable functions. The quadratic model between the dependent and independent variables was built. The proposed method showed good agreement between the experimental data and predictive value, and it has been successfully employed to adsorption of Ni²⁺ ions from aqueous solution. Subsequently, the experimental equilibrium data at different concentration of Ni²⁺ ions and 10 mg amount of adsorbent mass was fitted to conventional isotherm models like Langmuir, Freundlich, Tempkin, Dubinin-Radushkevich and it was revealed that the Langmuir is best model for explanation of behavior of experimental data. In addition, conventional kinetic models such as pseudo-first and second-order, Elovich and intraparticle diffusion were applied and it was seen that pseudo-second-order equation is suitable to fit the experimental data.     

Simulating magnetic nanoparticle behavior in low-field MRI under transverse rotating fields and imposed fluid flow

In the presence of alternating-sinusoidal or rotating magnetic fields, magnetic nanoparticles will act to realign their magnetic moment with the applied magnetic field. The realignment is characterized by the nanoparticle's time constant, τ. As the magnetic field frequency is increased, the nanoparticle's magnetic moment lags the applied magnetic field at a constant angle for a given frequency, Ω, in rad s⁻¹. Associated with this misalignment is a power dissipation that increases the bulk magnetic fluid's temperature which has been utilized as a method of magnetic nanoparticle hyperthermia, particularly suited for cancer in low-perfusion tissue (e.g., breast) where temperature increases of between 4 and 7 °C above the ambient in vivo temperature cause tumor hyperthermia. This work examines the rise in the magnetic fluid's temperature in the MRI environment which is characterized by a large DC field, B₀. Theoretical analysis and simulation is used to predict the effect of both alternating-sinusoidal and rotating magnetic fields transverse to B₀. Results are presented for the expected temperature increase in small tumors ( radius) over an appropriate range of magnetic fluid concentrations (0.002-0.01 solid volume fraction) and nanoparticle radii (1-10 nm). The results indicate that significant heating can take place, even in low-field MRI systems where magnetic fluid saturation is not significant, with careful the goal of this work is to examine, by means of analysis and simulation, the concept of interactive fluid magnetization using the dynamic behavior of superparamagnetic iron oxide nanoparticle suspensions in the MRI environment. In addition to the usual magnetic fields associated with MRI, a rotating magnetic field is applied transverse to the main B₀ field of the MRI. Additional or modified magnetic fields have been previously proposed for hyperthermia and targeted drug delivery within MRI. Analytical predictions and numerical simulations of the transverse rotating magnetic field in the presence of B₀ are investigated to demonstrate the effect of Ω, the rotating field frequency, and the magnetic field amplitude on the fluid suspension magnetization. The transverse magnetization due to the rotating transverse field shows strong dependence on the characteristic time constant of the fluid suspension, τ. The analysis shows that as the rotating field frequency increases so that Ωτ approaches unity, the transverse fluid magnetization vector is significantly non-aligned with the applied rotating field and the magnetization's magnitude is a strong function of the field frequency. In this frequency range, the fluid's transverse magnetization is controlled by the applied field which is determined by the operator. The phenomenon, which is due to the physical rotation of the magnetic nanoparticles in the suspension, is demonstrated analytically when the nanoparticles are present in high concentrations (1-3% solid volume fractions) more typical of hyperthermia rather than in clinical imaging applications, and in low MRI field strengths (such as open MRI systems), where the magnetic nanoparticles are not magnetically saturated. The effect of imposed Poiseuille flow in a planar channel geometry and changing nanoparticle concentration is examined. The work represents the first known attempt to analyze the dynamic behavior of magnetic nanoparticles in the MRI environment including the effects of the magnetic nanoparticle spin-velocity. It is shown that the magnitude of the transverse magnetization is a strong function of the rotating transverse field frequency. Interactive fluid magnetization effects are predicted due to non-uniform fluid magnetization in planar Poiseuille flow with high nanoparticle concentrations.     

A versatile method for the preparation of end-functional polymers onto SiO2 nanoparticles by a combination of surface-initiated ATRP and Huisgen [3 + 2] cycloaddition

A versatile method was developed for the chain-end functionalization of the grafted polymer chains for surface modification of nanoparticles with functionalized groups through a combination of surface-initiated atom-transfer radical polymerization (ATRP) and Huisgen [3 + 2] cycloaddition. First, the surface of SiO₂ nanoparticles was modified with poly(methyl methacrylate) (PMMA) brushes via the “grafting from” approach. The terminal bromides of PMMA-grafted SiO₂ nanoparticles were then transformed into an azide function by nucleophilic substitution. These azido-terminated PMMA brushes on the nanoparticle surface were reacted with alkyne-terminated functional end group via Huisgen [3 + 2] cycloaddition. FTIR and ¹H NMR spectra indicated quantitative transformation of the chain ends of PMMA brushes onto SiO₂ nanoparticles into the desired functional group. And, the dispersibility of the end-functional polymer-grafted SiO₂ nanoparticles was investigated with a transmission electron microscope (TEM).     

Preparation and photocatalytic properties of magnetically reusable Fe3O4@ZnO core/shell nanoparticles

Fe₃O₄@ZnO binary nanoparticles were synthesized by a simple two-step chemical method and characterized using various analytical instruments. TEM result proved the binary nanoparticles have core/shell structures and average particle size is 60 nm. Photocatalytic investigation of Fe₃O₄@ZnO core/shell nanoparticles was carried out using rhodamine B (RhB) solution under UV light. Fe₃O₄@ZnO core/shell nanoparticles showed enhanced photocatalytic performance in comparison with the as prepared ZnO nanoparticles. The enhanced photocatalytic activity for Fe₃O₄@ZnO might be resulting from the higher concentration of surface oxygen vacancies and the suppressing effect of the Fe³⁺ ions on the recombination of photoinduced electron–hole pairs. Magnetization saturation value (5.96 emu/g) of Fe₃O₄@ZnO core/shell nanoparticles is high enough to be magnetically removed by applying a magnetic field. The core/shell photocatalyst can be easily separated by using a commercial magnet and almost no decrease in photocatalytic efficiency was observed even after recycling six times.     

A facile and flexible process of β-cyclodextrin grafted on Fe3O4 magnetic nanoparticles and host-guest inclusion studies

In this study, a kind of novel surface-functionalized magnetic nanoparticles was fabricated by the Fe₃O₄ nanoparticles surface modification with mono-6-deoxy-6-(p-tolylsulfonyl)-cyclodextrin (6-TsO-β-CD), which were employed to interact with uric acid and their behavior was investigated by electrochemical methods. The architecture has been characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA), which confirmed that cyclodextrins have been effectively functionalized on the surface of Fe₃O₄ nanoparticles. The analyses of vibration sample magnetometer (VSM) verified that the nanoparticles owned good magnetic property. The grafted β-cyclodextrin on the Fe3O4 nanoparticles contributed to as a modified electrode for detecting uric acid with cyclic voltammograms. Electrochemical results revealed that the new materials could exhibit excellent molecules recognition ability and show high electrochemical response. The new nanoparticles simultaneously had unique properties of magnetic nanoparticles and cyclodextrins through combining their individual distinct advantages.