Speciation of butyltin compounds by on-line HPLC-ETAA of tropolone complexes in environmental samples

Tropolone (Trop) forms in solution stable complexes with monobutyltin (MBT Trop₂) and dibutyltin (DBT Trop). This property has been used to develop a separation procedure of butyltin compounds by liquid chromatography on cyanopropyl-bonded silica columns with a solution of tropolone in toluene as eluent. Tin-specific detection by on-line ETAA allowed the development of a simple procedure suitable for the determination of tributyltin and dibutyltin in water and sediment samples.     

Determination of butyltin compounds in sediments using an improved aqueous ethylation method

We have determined tributyltin and dibutyltin species in various environmental sediment samples (marine, harbour and river sediment) using the in situ aqueous ethylation-gas chromatography-atomic absorption spectrometry method subsequent to extraction by methanol containing O.5M HCl. The present technique provides a significantly lower detection limit than previous methods, so that tributyltin can for the first time be measured in some of the samples. Thus, the method described is well suited for the determination of tributyltin and dibutyltin compounds in sediments with low levels of butyltin species (e.g., Main River, 1.7 ng of tributyltin as Sn/g dry sediment).     

Isotope dilution GC-MS routine method for the determination of butyltin compounds in water

A standard GC-MS instrument with electron impact ionisation has been used to develop a fast, simple and reliable method for the simultaneous determination of monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in water samples. Isotope dilution analysis (IDA) is used for the determination of species, taking advantage of a commercially available spike solution containing a mixture of MBT, DBT and TBT enriched in ¹¹⁹Sn. Method detection limits for 100-mL samples were between 0.18 and 0.25 ng L⁻¹ for the three butyltin compounds with typical RSD between 2 and 4% at levels between 100 and 10 ng L⁻¹, respectively. Recovery of tin species in spiked samples (natural water, wastewater and seawater) was quantitative. The stability of butyltin compounds in collected seawater samples was also studied. The addition of a 1% (v/v) glacial acetic acid preserved tin species in the samples for at least 5 days at room temperature. The IDA method was finally implemented in a routine testing laboratory and it was subsequently accredited by the Spanish National Accreditation Body according to the requirements of UNE-EN ISO/IEC 17025.     

Speciation of butyltin compounds by on line HPLC-ETAAS

Speciation of butyltin compounds by liquid chromatography coupled to electrothermal atomic absorption spectrometry of toluene solutions containing tropolone is applied to sediment samples. Tributyltin and dibutyltin may be determined at concentrations as low as a few ng · g^–1. Monobutyltin is strongly retained, tetrabutyltin is not separated from tributyltin.     

Determination of Trace Butyltin Compounds in Sea Water by Gas Chromatography-Atomic Absorption Spectrometry

A gas chromatography-atomic absorption spectrometric (GC-AAS) method has been developed for the determination of trace butyltin compounds in sea water. Aqueous butyltin compounds were reduced to the volatile hydride forms by NaBH₄ and were extracted with dichloromethane simultaneously. The dichloromethane extract was concentrated under reduced pressure, followed by direct injection into the GC-AAS system for analysis. The butyltin species were separated with a 2-m glass column packed with 2% OV-101 on Chromosorb G HP (100-120 mesh). Following GC separation, each species was transferred into an electrothermally heated (800 °C) quartz furnace for atomization. The tin atoms produced from individual butyltin compound were detected at 224.6 nm by an atomic absorption spectrometer. With a sea water sample (1 L), the detection limits (3σ) for monobutyltin, dibutyltin and tributyltin were approximately 20, 20 and 70 ng Sn L^?1, respectively. The method has been applied to the analysis of trace butyltin compounds in the sea water of Keelung Harbor.     

丁基锡系列化合物与脱氧核糖核酸的相互作用

通过紫外（ultraviolet,UV）光谱和圆二色（circular dichroism,CD）光谱,研究了丁基锡化合物（一丁基锡、二丁基锡和三丁基锡）与脱氧核糖核酸（deoxyribonucleic acid,DNA）的作用方式以及时间和浓度的影响。结果显示丁基锡化合物与DNA的作用是双重的,既作用于DNA的碱基,对双螺旋结构有一定影响,又作用于DNA的磷酸基团,使构象发生变化。但是,丁基锡化合物与脱氧核糖核酸作用的程度和方式与丁基锡种类、时间和浓度等因素有关。一丁基锡倾向于与磷酸基团作用,三丁基锡倾向于与碱基作用,而二丁基锡与两者作用程度相近。短时间内,丁基锡化合物的作用位点通常是DNA的碱基;长时间时,则作用位点往往是DNA的磷酸基团。低浓度的丁基锡化合物倾向与DNA的碱基结合,高浓度的丁基锡化合物倾向与DNA的磷酸基团结合。     

Determination of organotin compounds in environmental samples by supercritical fluid extraction and gas chromatography with atomic emission detection

The extraction of six tetraalkyltin and seven ionic organotin compounds from spiked topsoil samples with supercritical carbon dioxide and carbon dioxide modified with 5 percent methanol was investigated. Analysis of the soil extracts was performed by gas chromatography with atomic emission detection. Retention times, minimum detectable concentrations, and detector linear ranges are included for nine organotin compounds (seven of the nine compounds were derivatized with n-pentylmagnesium bromide prior to gas chromatographic analysis). A 2³ factorial experimental design was used to study the effect of three variables (pressure, temperature, and extraction time) on compound recovery. The results indicate that the tetraalkyltin compounds are extracted from topsoil samples with recoveries ranging from 90 to 110 percent. Recoveries for the ionic organotin compounds ranged from 50 to 75 percent for trimethyltin chloride, triethyltin bromide, and tributyltin iodide; they were below 20 percent for dimethyltin dichloride, dibutyltin dichloride, diphenyltin dichloride, and butyltin trichloride. When sodium diethyldithiocarbamate was added to the soil samples prior to extraction, followed by extraction with carbon dioxide modified with 5 percent methanol, recoveries ranged from 70 to 90 percent for trimethyltin chloride, triethyltin bromide, dimethyltin dichloride, tributyltin iodide, and dibutyltin dichloride; recoveries were approximately 40 percent for butyltin trichloride and diphenyltin dichloride.     

Speciation of butyltin compounds in marine sediments by preconcentration on C60 and gas chromatography-mass spectrometry

A new method for the speciation of butyltin compounds by solid phase extraction and direct injection using gas chromatography-mass spectrometry (GC/MS) is described. The compounds were complexed with sodium diethyldithiocarbamate and retained on a C60 sorbent column. The neutral chelates of butyltin compounds were eluted with ethyl acetate containing NaBPr4 as derivatising reagent. The main analytical figures of merit of the proposed method for 10 ml of sample are: linear range 0.2-35 ng/g expressed as Sn; limits of detection, 0.07, 0.09 and 0.10 ng/g as Sn for monobutyltin, dibutyltin and tributyltin, respectively. No interferences from metal ions such as Zn2+, Fe3+, Sb3t, Pb2+, Ni2+ and Mn2+ were observed in the determination of organotin compounds. The validation of method was performed out by the analysis of a standard reference sediment (CRM 462). The method was also applied to the determination of butyltin compounds in marine sediment samples.     

Evaluation of extraction techniques for butyltin compounds in sediment

There have been many methods available for the determination of butyltin compounds in sediment. The variations of these methods are not in the methods of determination but rather in the extraction of these compounds from the complex matrices. All of these methods have not been critically compared or evaluated, mainly because of the lack of a suitable reference sediment for butyltin compounds. Recently, the National Research Council of Canada has introduced a reference sediment (PACS-1) which contains certified values of butyltin compounds. The present study compares the recoveries of ten extraction techniques for butyltin species using ethylation derivatization and GC AA as the method of determination. Of these ten methods, only four were found satisfactory for extraction of the dibutyltin and tributyltin species. None of the methods evaluated, however, could quantitatively extract monobutyltin from sediment.     

Contamination by butyltin compounds in harbour porpoise (Phocoena phocoena) from the Black Sea

Concentrations of butyltin compounds (BTs) were determined in harbour porpoise (Phocoena phocoena) collected from the Turkish coastal waters of the Black Sea. Total butyltin compounds (∑ BTs) in the liver were in the range of 89–219 ng/g on a wet weight basis. The dibutyltin (DBT) residues were higher than those of tributyltin (TBT), suggesting the degradation of TBT to DBT in the liver and the metabolic capacity comparable to other marine mammals. Any sex difference and age-dependent accumulation of BTs residues were not found in harbour porpoises, but residue levels increased until maturity and then remained constant. When compared with other marine mammals, the present results indicate that the Black Sea is also contaminated with butyltin compounds, but to a lesser degree than coastal waters of developed nations. The biomagnification factor in harbour porpoises was 0.8, which was comparable with pinnipeds and lower than cetaceans. Received: 23 December 1996 / Revised: 15 April 1997 / Accepted: 16 April 1997     

Determination of butyltin species in natural waters using aqueous phase ethylation and off-line room temperature trapping

Monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) were determined in natural water samples by aqueous phase ethylation with sodium tetraethylborate (STEB), room temperature trapping of the resulting volatile derivatives on Tenax TA^®, followed by gas chromatography-quartz furnace atomic absorption spectrometry (GC-QFAAS). Recoveries of butyltin spikes from natural water samples were 90-109% at concentrations of ∼100 ng Sn/l. The method precision at ∼100 ng Sn/l was ≤6% RSD for butyltins spiked into natural waters. The detection limits for 1 l water samples were <1 ng Sn/l for all butyltin species. Sample throughput of the method is high (greater than three samples per hour) due to the two-stage nature of the procedure, which allows derivatisation/trapping and GC-QFAAS quantitation to be performed separately. Off-line trapping is also advantageous as it extends the life of the GC column and quartz furnace to at least 12 months due to minimisation of carry-over of co-purged material.     

Contamination by butyltin compounds in harbour porpoise (Phocoena phocoena) from the Black Sea

Concentrations of butyltin compounds (BTs) were determined in harbour porpoise (Phocoena phocoena) collected from the Turkish coastal waters of the Black Sea. Total butyltin compounds (∑ BTs) in the liver were in the range of 89–219 ng/g on a wet weight basis. The dibutyltin (DBT) residues were higher than those of tributyltin (TBT), suggesting the degradation of TBT to DBT in the liver and the metabolic capacity comparable to other marine mammals. Any sex difference and age-dependent accumulation of BTs residues were not found in harbour porpoises, but residue levels increased until maturity and then remained constant. When compared with other marine mammals, the present results indicate that the Black Sea is also contaminated with butyltin compounds, but to a lesser degree than coastal waters of developed nations. The biomagnification factor in harbour porpoises was 0.8, which was comparable with pinnipeds and lower than cetaceans. Received: 23 December 1996 / Revised: 15 April 1997 / Accepted: 16 April 1997     

Can mono- or di-butyltin chlorides produce tributyltin chloride at elevated temperatures? Implications for applications in chemical vapour deposition

The thermolysis of the butyltin chlorides at 200-300 °C in the liquid phase has been investigated by ¹H, ¹³C, and ¹¹⁹Sn NMR spectroscopy. The stabilities follow the order: Bu₂SnCl₂ > Bu₃SnCl > BuSnCl₃. Only tributyltin chloride showed any evidence of redistribution, giving dibutyltin dichloride, together with metallic tin, butane, and but-1-ene, which would be formed by decomposition of tetrabutyltin. Dibutyltin dichloride decomposed to give mainly butane with no other apparent liquid organotin compound. Butyltin trichloride gave butane, some butene, and metallic tin, and showed no evidence of forming tributyltin chloride by the redistribution reaction, which would have environmental implications for its use in the CVD coating of glass.     

Tartaric acid extraction of organotin compounds from sediment samples

A new extraction method for the determination of tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) in sediments based on extraction with tartaric acid and methanol has been developed. Tin species were extracted from sediment samples using focused microwave technology, then ethylated with sodium tetraethylborate (NaBEt₄) and analyzed by isotope dilution (ID) gas chromatography-mass spectrometry (GC-MS). The advantages of such methodology in comparison with other established extraction methods for the routine speciation analysis of organotin compounds are discussed with respect to sulfur interferences co-extracted from complex matrices.Interferences from elemental sulfur are normally found with acetic acid extraction, but with tartaric acid extraction these interferences were eliminated, demonstrating selective extraction.The accuracy of the analytical procedure was established by analyzing a certified reference material (CRM) (PACS-2, marine sediment) and comparing the results to the certified values. Good agreement between determined and certified values for butyltin compounds was obtained. Finally, some complex sediment samples collected from San Vicente's Bay, Chile, were analyzed with the proposed methodology, demonstrating its potential value for monitoring butyltins in environmental samples with high concentrations of sulfur compounds.     

Loss of selenium in water samples at natural levels during storage

Selenium losses in river, ground, snow-melt and tap water samples, and the recovery of selenite, selenate and selenomethionine added to purified water have been studied. In 1-litre high-density polyethylene bottles, tap, river and snow-melt water samples (at Se concentrations of 44.5–138 ng/l) could be stored at 4 °C for up to 15 days without Se losses. In similar samples stored at room temperature Se losses of 13–25% after 15 days were found, except for groundwater, which showed no Se losses during storage for 13 months at room temperature or at 4 °C. Selenite and selenate added to purified water were recovered without losses after 15 days at 4 °C, while 7.5% of selenomethionine was lost. The stability of different chemical forms of Se during storage followed the order: selenate > selenomethionine > selenite. It is recommended that unacidified water samples should not be kept in polyethylene bottles at room temperature for more than 1 week, nor stored at 4 °C for more than 2 weeks, before analysis for Se.     

Hepatic butyltin concentrations in beluga whales (Delphinapterus leucas) from the St Lawrence Estuary and northern Quebec,Canada

Butyltin (tributyltin TBT; dibutyltin DBT and monobutyltin MBT) speciation was measured in the liver of beluga whales from the St Lawrence Estuary and Hudson Strait (northern Quebec). Using GC–MS, liver samples were analysed from 21 beluga whales found dead, stranded along the shores of the St Lawrence during the period 1995–1998. In all cases, including a neonate specimen, the liver was contaminated with butyltin compounds with concentrations in the range 0.04–2.1 mg Sn kg⁻¹ on a dry weight basis. Liver samples of five beluga whales from Hudson Strait obtained in the summer of 1998 were also analysed. For these animals, hepatic butyltin concentrations were consistently below the detection limit (<0.5 ng Sn g⁻¹ for MBT and <0.2 ng Sn g⁻¹ for DBT and TBT). Compared with published data on the contamination by TBT of the marine mammals of the St Lawrence in 1988, these contemporary results clearly indicate that the level of contamination of the beluga whales in this coastal marine ecosystem has not decreased ten years after regulating the use of TBT‐based antifoulants on small craft. Copyright © 2000 John Wiley & Sons, Ltd.     

水相中丁基锡化合物同时衍生／萃取气相色谱／火焰光度检测方法研究

本文建立了水相中丁基锡化合物的衍生／萃取一步进行气相色谱／火焰光度检测的方法，探讨了溶剂，氮气流速，温度及火焰条件对分离及测定的影响，获得了理想的分离及检测条件。检出限分别为一丁基锡（ＭＢＴ）及二丁基锡（ＤＢＴ）０．２５ｎｇ，三丁基锡（ＴＢＴ）及四丁基锡（Ｂｕ４Ｓｎ）０．５ｎｇ；线性范围０－８ｎｇ，相对标准偏差小于４％。     

Single-walled carbon nanotubes as solid-phase microextraction adsorbent for the determination of low-level concentrations of butyltin compounds in seawater

Carbon nanotubes are a kind of new carbon-based nanomaterials, which have drawn great attention in many application fields. The potential of single-walled carbon nanotubes (SWCNTs) as solid-phase microextraction (SPME) adsorbent for the preconcentration of environmental pollutants has been investigated in recent years. In the present study, the feasibility of SWCNTs as SPME adsorbent for the determination of monobutyltin, dibutyltin and tributyltin in seawater samples was studied. To achieve this aim, the potential factors affecting the SPME efficiency, including extraction time, extraction temperature, desorption time, desorption temperature, and salinity were optimized. The developed method showed good performance according to the ICH (International Conference on Harmonization of Technical Requirements for Analytical Methods) criteria. The acquired calibration curves were linear (r ≥ 0.992) over the concentration range from ≤12 to 2000 ng L⁻¹. For all of the analytes, the limit of detection at signal-to-noise ratio of 3 was below 5 ng L⁻¹. Furthermore, in comparison with the commercial carboxen/polydimethylsiloxane fiber, the developed SWCNT fiber showed better thermal stability (over 350 °C) and longer life span (over 150 times). The application of the proposed method in environmental analyses was shown by analyzing seawater samples from the harbors on the Persian Gulf for butyltin residues. Some of the butyltins were detected in the analyzed samples. Results of the present study demonstrate the feasibility of the SWCNTs as SPME adsorbent for the determination of butyltins in seawater samples.     

Effects of γ-sterilization on butyltin homogeneity and content in sediments: a GC–ICP–MS study

A GC-ICP-MS method based on extraction and alkylation of butyltins with sodium tetraethylborate was used to quantitatively assess the fate of these analytes in solutions and sediments following exposure to gamma-irradiation. The effects of a 2.5 Mrad sterilization dose on three butyltin species in both methanolic calibration solutions and in sediment matrices were investigated. Although significant losses of tributyltin (TBT, 90%), dibutyltin (DBT, 100%) and monobutyltin (MBT, 80%) were detected in standard solutions prepared in methanol following gamma-irradiation, no species inter-conversion occurred. Some degradation of TBT (38%) and DBT (32%) but no significant change in MBT content was found using a spiked sediment CRM HISS-1. Conversion DBT to MBT in spiked HISS-1 was deduced. Much smaller degradation of TBT (16% loss) and 10% loss of DBT by conversion to MBT (14% gain) was registered using a sediment blend of PACS-2 and HISS-1 (SOPH). Despite some initial losses of TBT and DBT due to irradiation, better than 2% RSD in both TBT and DBT concentrations measured in twelve different bottles of blended sediment SOPH were obtained, indicating the material may be considered homogeneous for these analytes. Results from a long-term five-year stability study of PACS-2 show that all three butyltins are stable during storage at 4 degrees C followed with 2.5 Mrad minimum dose of gamma-irradiation sterilization treatment.     

Determination of Butyltins in Sea Water by Gas Chromatography with Flame Photometric Detection

Use of a gas chromatograph with a flame-photometric detector (GC-FPD) is described to determine butyltin compounds in sea water. The butyltins in an acidified water sample (pH 3.0) are first complexed with tropolone, followed by solid-phase extraction (SPE) with a tropolone-treated C₁₈ cartridge. HCI at a small concentration is then added to the concentrated SPE eluate before GC analysis. This procedure is simple and off-column derivatization of analytes is not required. The organotins, viz. mono-, di- and tributyltin, are separated as their respective chlorides on a capillary column (HP-1) and are detected with a flame-photometric detector and an interference filter at 610 nm. Recoveries of the three butyltin species are quantitative (> 90%). Based on a sea water sample 200-mL, the detection limits for mono-, di- and tributyltin are 6,4 and 3 ng tin L^?1, respectively. This method is applied to analysis of trace butyltins in various samples of sea water.