Mechanistic aspects of formal [3 + 4] cycloadditions between vinylcarbenoids and furans

Rhodium(II) acetate catalyzed decomposition of diethyl 4-diazo-2-pentenedioate resulted in the fomation of a vinylcarbenoid, which underwent formal [3 + 4] cycloaddition reactions with a series of furans. The most likely mechanism for these reactions involves cyclopropanation followed by a Cope rearrangement of the divinylcyclopropane intermediate.     

Asymmetric [4+3] cycloadditions between benzofuranyldiazoacetates and dienes: formal synthesis of (+)-frondosin B

The reaction of benzofuranyldiazoacetates with 1,3-dienes catalyzed by the dirhodium tetracarboxylate Rh2(R-DOSP)4, generates formal [4+3] cycloadducts with >94% de and 91-98% ee. The reaction proceeds by a tandem cyclopropanation/Cope rearrangement followed by a stereoselective tautomerization. This methodology was extended to a formal synthesis of (+)-frondosin B.     

Intramolecular [4 + 2] cycloadditions of benzynes with conjugated enynes, arenynes, and dienes

Benzynes generated by the reaction of o-(trimethylsilyl)aryl triflates with TBAT participate in intramolecular [4 + 2] cycloadditions with conjugated enynes, arenynes, and dienes to furnish highly condensed polycyclic aromatic compounds. [reaction: see text]     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

Synthesis of functionalized arylpyridines and -pyrimidines by domino [4+2]/retro [4+2] cycloadditions of electron-rich dienes with alkynylpyridines and -pyrimidines

Aryl-substituted pyridines and pyrimidines were prepared by [4+2] cycloadditions of alkynyl-substituted pyridines and -pyrimidines with electron-rich dienes. The reactions proceed by formation of a bridged cycloadduct and subsequent thermal extrusion of ethylene. The pyridine moiety plays a crucial role for the success of the reaction.     

Mechanically facilitated retro [4+2] cycloadditions

Poly(methyl acrylate)s (PMAs) of varying molecular weights were grown from a [4+2] cycloaddition adduct of maleimide with furan containing two polymerization initiators. Subjecting the corresponding PMA (>30 kDa) chains to ultrasound at 0 °C resulted in a retro [4+2] cycloaddition reaction, as observed by gel permeation chromatography (GPC) and UV-vis spectroscopy, as well as labeling of the liberated maleimide and furan moieties with appropriate chromophores featuring complementary functional groups. Similar results were obtained by sonicating analogous polymers that were grown from a thermally robust [4+2] cycloaddition adduct of maleimide with anthracene. The generation of anthracenyl species from these latter adducts allowed for the rate of the corresponding mechanically activated retro [4+2] cycloaddition reaction to be measured. No reduction in the number average molecular weight (M(n)) or liberation of the maleimide, furan, or anthracene moieties was observed (i) for polymers containing the cycloaddition adducts with M(n) < 20 kDa, (ii) for high molecular weight PMAs (M(n) > 60 kDa) featuring terminal cycloaddition adducts, or (iii) when the cycloaddition adducts were not covalently linked to a high molecular weight PMA. Collectively, these results support the notion that the aforementioned retro [4+2] cycloaddition processes were derived from a vectorially opposed mechanical force applied to adducts embedded within the polymer chains.     

Photoinduced [4 + 4] cycloadditions of o-quinones with oxazoles

[reaction: see text] Photocycloadditions of 9,10-phenanthraquinone (PQ) with oxazoles (1a and 1b) gave [4 + 4] products 2 with the O=C-C=O functionality in PQ and the 2-azadiene moiety in oxazole as 4pi addends. Photoreactions of 1-acetylisatin (IS) with 1a, 1c, and 1d gave [4 + 4] product A, which underwent further [2 + 2] reactions with another (3)IS to furnish 5. These regioselective and diastereoselective [4 + 4] photocycloadditions are rationalized by the intervening of the key conformers for ISC and bond formation of the most stable 1,6-diradical intermediates.     

Tandem double intramolecular [4 + 2]/[3 + 2] cycloadditions of nitroalkenes

[reaction: see text]. A new class of tandem [4 + 2]/[3 + 2] cycloadditions of nitroalkenes is described in which both pericyclic processes are intramolecular. Two subclasses of intra [4 + 2]/intra [3 + 2] cycloadditions have been explored in which the dipolarophile is tethered at either C(5) or C(6) of the nitronate. For both families of precursors, the cycloadditions occur in good yield and are found to be highly regio- and stereoselective. This method converts linear polyenes to functionalized polycyclic systems bearing up to six stereogenic centers.     

2 + 4] and [4 + 2] cycloadditions of o-thioquinones with 1,3-dienes: a computational study

Cycloadditions of o-thioquinones (o-TQs) with 1,3-dienes could proceed via either a [2 + 4] or a [4 + 2] mechanism. Under kinetic control and with acyclic dienes the reaction affords the spiro cycloadducts 5deriving from the [2 + 4] path as the main products. Under thermodynamic control, or with cyclic dienes, the o-TQs behave as heterodienes to give the benzoxathiin derivatives 4, in most cases with complete regioselectivity. In the present computational study, DFT calculations were performed in order to achieve a deep understanding of both [2 + 4] and [4 + 2] paths. The reactions of three o-TQs with six 1,3-dienes were thoroughly investigated at the B3LYP/TZVP//B3LYP6-31G level, and the two reaction mechanisms were then compared, evidencing that [2 + 4] cycloadditions are kinetically favored, strongly asynchronous, or even unconcerted, while [4 + 2] reactions are thermodynamically favored, quite asynchronous, but undoubtedly concerted. Moreover, the observed regioselectivity was rationalized by mean of the FMO theory and by comparison of the activation energies for different pathways.     

Inter- and intramolecular [4 + 1]-cycloadditions between electron-poor dienes and electron-rich carbenes

Inter- and intramolecular [4 + 1]-annulations between dialkoxy carbenes and electron-deficient dienes afford mono- or bicyclic products in moderate to good yield.     

Solvent-free thermal and microwave-assisted [3 + 2] cycloadditions between stabilized azomethine ylides and nitrostyrenes. An experimental and theoretical study

The stereochemical outcomes observed in the thermal and microwave-assisted [3 + 2] cycloaddition between stabilized azomethine ylides and nitrostyrenes have been analyzed using experimental and computational approaches. It has been observed that, in the absence of solvent, three stereoisomers are formed, both under classical heating conditions and under microwave irradiation. This result contrasts with that observed in solution under classical thermal conditions. The 4-nitropyrrolidines obtained in this way can be aromatized under further microwave irradiation to yield mixtures of pyrroles and 4-nitropyrroles. It is found that ground state cycloadditions between imines and nitrostyrenes take place by three-step mechanisms. The first step involves enolization of the starting imine, and this is followed by a pseudopericyclic 10-electron [1.4]-hydrogen shift. Finally, the cycloaddition takes place by a relatively asynchronous aromatic six-electron supra-supra thermal mechanism.     

Microwave-assisted [3 + 2] cycloadditions of azomethine ylides

The microwave-assisted intramolecular [3 + 2] cycloaddition reaction of azomethine ylides to activated and nonactivated alkenes and alkynes is described. The procedure allows the synthesis of pyrrolidines and pyrrole products in good to excellent overall yields in short reaction times. It appears from parallel comparative studies that the microwave procedure favors the reaction times and overall purity of the crude reaction mixture. The reactions can also be performed in the absence of solvent. [reaction: see text]     

Reactivity of allenoates toward aziridines: [3+2] and formal [3+2] cycloadditions

The reactivity of buta-2,3-dienoates toward aziridines is reported. Allenoates react as 2π-component in the [3+2] cycloaddition with the azomethine ylide generated from cis-1-benzyl-2-benzoyl-3-phenylaziridine affording 4-methylenepyrrolidines in a site-, regio-, and stereoselective fashion. Under conventional thermolysis, cis- and trans-2-benzoyl-1-cyclohexyl-3-phenylaziridines showed a different reactivity. These aziridines participate in formal [3+2] cycloadditions with allenes via C-N bond cleavage of the three-membered ring leading to functionalized pyrroles.     

Rhodium-catalyzed intramolecular [4 + 2] cycloadditions of alkynyl halides

[reaction: see text] Cationic rhodium(I)-catalyzed intramolecular [4 + 2] cycloadditions of diene-tethered alkynyl halides were found to occur in good yields (70-87%). The halide moiety is compatible with the cycloaddition reactions, and no oxidative insertion to the alkynyl halide was observed. The halogen-containing cycloadducts could be transformed into a variety of products that are difficult or impossible to obtain via direct cycloaddition.