Single- and double-shelled coaxial nanocables of GaP with silicon oxide and carbon

Coaxial nanocables of gallium phosphide (GaP) core with three different-typed single and double shells (i.e., silicon oxide (SiO(x)), carbon (C), and SiO(x)/C) were exclusively synthesized by the chemical vapor deposition method. The GaP/SiO(x)) nanocables were directly grown on gold-deposited silicon substrates. Deposition of C on the GaP nanowires and GaP/SiO(x) nanocables produces the GaP/C and GaP/SiO(x)/C nanocables, respectively. The outer diameter of the nanocables is <50 nm. The thickness and crystallinity of the C outer layers were controllable by the growth conditions. X-ray photoelectron spectroscopy, X-ray diffraction, Raman spectroscopy, and photoluminescence reveal that the outer layer formation reduces the surface defects of GaP nanowires. A great enhancement of the conductivity due to the C outer layers has been measured by the four-probe method. The growth process of these nanocables has been discussed on the basis of the vapor-liquid-solid mechanism.     

Systematic study on experimental conditions for large-scale growth of aligned ZnO nanowires on nitrides

In vapor-liquid-solid (VLS) growth, it is generally believed that nanowires would grow as long as the right catalysts and substrate are supplied as well as the growth temperature is adequate. We show here, however, that oxygen partial pressure plays a key role in determining the quality of the aligned ZnO nanowires. We present a "phase diagram" between the oxygen partial pressure and the growth chamber pressure for synthesizing high quality aligned ZnO nanowires on GaN substrate. This result provides a road map for large-scale, controlled synthesis of ZnO nanowires on nitride semiconductor substrates with the potential to meet the needs of practical applications. The chemical process involved in the growth process is also systematically elaborated based on experimental data received under different conditions.     

Inorganic semiconductor nanowires: rational growth, assembly, and novel properties

Rationally controlled growth of inorganic semiconductor nanowires is important for their applications in nanoscale electronics and photonics. In this article, we discuss the rational growth, physical properties, and integration of nanowires based on the results from the authors' laboratory. The composition, diameter, growth position, and orientation of the nanowires are controlled based on the vapor-solid-liquid (VLS) crystal growth mechanism. The thermal stability and optical properties of these semiconductor nanowires are investigated. Particularly, ZnO nanowires with well-defined end surfaces can function as room-temperature ultraviolet nanolasers. In addition, a novel microfluidic-assisted nanowire integration (MANI) process was developed for the hierarchical assembly of nanowire building blocks into functional devices and systems.     

Molten gallium as a catalyst for the large-scale growth of highly aligned silica nanowires

The vapor-liquid-solid (VLS) process is a fundamental mechanism for the growth of nanowires, in which a small size (5-100 nm in diameter), high melting point metal (such as gold and iron) catalyst particle directs the nanowire's growth direction and defines the diameter of the crystalline nanowire. In this article, we show that the large size (5-50 microm in diameter), low melting point gallium droplets can be used as an effective catalyst for the large-scale growth of highly aligned, closely packed silica nanowire bunches. Unlike any previously observed results using gold or iron as catalyst, the gallium-catalyzed VLS growth exhibits many amazing growth phenomena. The silica nanowires tend to grow batch by batch. For each batch, numerous nanowires simultaneously nucleate, grow at nearly the same rate and direction, and simultaneously stop growing. The force between the batches periodically lifts the gallium catalyst upward, forming two different kinds of products on a silicon wafer and alumina substrate. On the silicon wafer, carrot-shaped tubes whose walls are composed of highly aligned silica nanowires with diameters of 15-30 nm and length of 10-40 microm were obtained. On the alumina substrate, cometlike structures composed of highly oriented silica nanowires with diameters of 50-100 nm and length of 10-50 microm were formed. A growth model was proposed. The experimental results expand the VLS mechanism to a broader range.     

Aqueous-solution growth of GaP and InP nanowires: a general route to phosphide, oxide, sulfide, and tungstate nanowires

A general synthetic route has been developed for the growth of metal phosphide, oxide, sulfide, and tungstate nanowires in aqueous solution. In detail, cetyltrimethylammonium cations (CTA(+)) can be combined with anionic inorganic species along a co-condensation mechanism to form lamellar inorganic-surfactant intercalated mesostructures, which serve as both microreactors and reactants for the growth of nanowires. For example, GaP, InP, gamma-MnO(2), ZnO, SnS(2), ZnS, CdWO(4), and ZnWO(4) nanowires have been grown by this route. To the best of our knowledge, this is the first time that the synthesis of GaP and InP nanowires in aqueous solution has been achieved. This strategy is expected to extend to grow nanowires of other materials in solution or by vapor transport routes, since the nanowire growth of any inorganic materials can be realized by selecting an appropriate reaction and its corresponding lamellar inorganic-surfactant precursors.     

Synthesis and optical properties of gallium phosphide nanotubes

Gallium phosphide nanotubes with zinc blende structure were synthesized for the first time. The as-prepared GaP nanotubes are polycrystalline with diameters of 30-120 nm and occasionally partially filled. The growth has been reasonably proposed to follow vapor-liquid-solid (VLS) mechanism. The integration of the nanotubular structure with the unique intrinsic semiconducting properties of GaP might bring GaP nanotubes some novel optical and electronic properties and applications.     

Catalyst-nanostructure interfacial lattice mismatch in determining the shape of VLS grown nanowires and nanobelts: a case of Sn/ZnO

Vapor-liquid-solid (VLS) is a well-established process in catalyst-guided growth of nanowires. The catalyst particle is generally believed to be in liquid state during growth, and it is the site for adsorbing incoming molecules; the crystalline structure of the catalyst may not have any influence on the structure of the grown one-dimensional nanostructures. In this paper, using tin particle guided growth of ZnO nanostructures as a model system, we show that the interfacial region of the tin particle with the ZnO nanowire/nanobelt could be ordered (or partially crystalline) during the VLS growth, although the local growth temperature is much higher than the melting point of tin, and the crystallographic lattice structure at the interface is important in defining the structural characteristics of the grown nanowires and nanobelts. The interface prefers to take the least lattice mismatch; thus, the crystalline orientation of the tin particle may determine the growth direction and the side surfaces of the nanowires and nanobelts. This result may have important impact on the understanding of the physical chemical process in the VLS growth.     

Preparation and electrical properties of ultrafine Ga2O3 nanowires

Uniform and well-crystallized beta-Ga2O3 nanowires are prepared by reacting metal Ga with water vapor based on the vapor-liquid-solid (VLS) mechanism. Electron microscopy studies show that the nanowires have diameters ranging from 10 to 40 nm and lengths up to tens of micrometers. The contact properties of individual Ga2O3 nanowires with Pt or Au/Ti electrodes are studied, respectively, finding that Pt can form Schottky-barrier junctions and Au/Ti is advantageous to fabricate ohmic contacts with individual Ga2O3 nanowires. In ambient air, the conductivity of the Ga2O3 nanowires is about 1 (Omega.m)-1, while with adsorption of NH3 (or NO2) molecules, the conductivity can increase (or decrease) dramatically at room temperature. The as-grown Ga2O3 nanowires have the properties of an n-type semiconductor.     

Synthesis of high-purity GaP nanowires using a vapor deposition method

High-purity gallium phosphide (GaP) nanowires were successfully synthesized on the nickel monoxide (NiO) or the cobalt monoxide (CoO) catalyzed alumina substrate by a simple vapor deposition method. To synthesize the high-purity GaP nanowires, the mixture source of gallium (Ga) and GaP powder was directly vaporized in the range of 850–1000 °C for 60 min under argon ambient. The diameter of GaP nanowires was about 38–105 nm and the length was up to several hundreds of micrometers. The GaP nanowires have a single-crystalline zinc blend structure and reveal the core-shell structure, which consists of the GaP core and the GaPO₄/Ga₂O₃ outer layers. We demonstrate that the mixture of Ga/GaP is an ideal source for the high-yield GaP nanowires.     

PLD-assisted VLS growth of aligned ferrite nanorods, nanowires, and nanobelts-synthesis, and properties

We report here a systematic synthesis and characterization of aligned alpha-Fe2O3 (hematite), epsilon-Fe2O3, and Fe3O4 (magnetite) nanorods, nanobelts, and nanowires on alumina substrates using a pulsed laser deposition (PLD) method. The presence of spherical gold catalyst particles at the tips of the nanostructures indicates selective growth via the vapor-liquid-solid (VLS) mechanism. Through a series of experiments, we have produced a primitive "phase diagram" for growing these structures based on several designed pressure and temperature parameters. Transmission electron microscopy (TEM) analysis has shown that the rods, wires, and belts are single-crystalline and grow along <111>m or <110>h directions. X-ray diffraction (XRD) measurements confirm phase and structural analysis. Superconducting quantum interference device (SQUID) measurements show that the iron oxide structures exhibit interesting magnetic behavior, particularly at room temperature. This work is the first known report of magnetite 1D nanostructure growth via the vapor-liquid-solid (VLS) mechanism without using a template, as well as the first known synthesis of long epsilon-Fe2O3 nanobelts and nanowires.     

Solution-liquid-solid growth of semiconductor nanowires

The serendipitously discovered solution-liquid-solid (SLS) mechanism has been refined into a nearly general synthetic method for semiconductor nanowires. Purposeful control of diameters and diameter distributions is achieved. The synthesis proceeds by a solution-based catalyzed-growth mechanism in which nanometer-scale metallic droplets catalyze the decomposition of metallo-organic precursors and crystalline nanowire growth. Related growth methods proceeding by the analogous vapor-liquid-solid (VLS) and supercritical fluid-liquid-solid (SFLS) mechanisms are known, and the relative attributes of the methods are compared. In short, the VLS method is most general and appears to afford nanowires of the best crystalline quality. The SLS method appears to be advantageous for producing the smallest nanowire diameters and for variation and control of surface ligation. The SFLS method may represent an ideal compromise. Recent results for SLS growth are summarized.     

Growth kinetics of one-dimensional KNbO3 nanostructures by hydrothermal processing routes

The growth kinetics of one-dimensional single-crystalline KNbO(3) nanostructures (nanowires and nanofingers, the latter understood as defective nanowires) prepared by hydrothermal processing routes has been theoretically studied. A model taking into account the cube-based morphology of the nanostructures, their defects as the KOH proportion in the starting solution increases, and the partial depletion of species in the solution at the kink regions is proposed. Such a model allows the morphological evolution of the nanostructures to be successfully reproduced, shedding light on the origin of their highly anisotropic growth.     

Synthesis of crystalline boron nanowires by laser ablation

Crystalline boron nanowires with tetragonal structure have been synthesized based on laser ablation of a B/NiCo target; the nanowires are sometimes single crystals and have a droplet at one end of the nanowire; the droplet contains B, Ni and Co elements, which indicates that the vapor-liquid-solid (VLS) mechanism may play a key role in the growth of the boron nanowires.     

Mass transport model for semiconductor nanowire growth

We present a mass transport model based on surface diffusion for metal-particle-assisted nanowire growth. The model explains the common observation that for III/V materials thinner nanowires are longer than thicker ones. We have grown GaP nanowires by metal-organic vapor phase epitaxy and compared our model calculations with the experimental nanowire lengths and radii. Moreover, we demonstrate that the Gibbs-Thomson effect can be neglected for III/V nanowires grown at conventional temperatures and pressures.     

Self-catalytic solution for single-crystal nanowire and nanotube growth

Vast majority of nanowires is grown by the chemical vapor deposition (CVD), molecular beam epitaxy (MBE), metal-organic CVD (MOCVD), or the laser ablation method via the vapor-liquid-solid (VLS) route. Others are grown via the oxide-assisted route. In this investigation a self-catalytic synthesis route based on VLS formalism and suitable for the CVD, MBE, MOCVD, or the laser ablation method has been described. Various issues pertaining to growth kinetics, nanowire alignment, diameter distribution, and nanotube formation have been addressed. The strength of the self-catalytic route has been highlighted. As this route does not make use of foreign element catalytic agents to mediate the synthesis, it suffers from difficulties. Attempts have been made to elucidate means to overcome these difficulties. Attempts have also been made to explain the means to separate the nanowires thus produced from the substrate/scaffold, and to control their physicochemical characteristics.     

Construction of graphdiyne nanowires with high-conductivity and mobility

GDNWs (graphdiyne nanowires) have successfully been constructed which exhibit a very high quality defect-free surface using the VLS growth process. Measurement of electrical properties showed that the GDNWs produced are excellent semiconductors with a conductivity of 1.9 × 10(3) S m(-1) and a mobility of 7.1 × 10(2) cm(2) V(-1) s(-1) at room temperature. The results have confirmed that GDNW is indeed a promising and key novel material in electronic and photoelectric fields for both fundamental and potentially practical applications.     

Spatial determination of gold catalyst residue used in the production of ZnO nanowires by SIMS depth profiling analysis

In this paper we demonstrate how secondary ion mass spectrometry (SIMS) can be applied to ZnO nanowire structures for gold catalyst residue determination. Gold plays a significant role in determining the structural properties of such nanowires, with the location of the gold after growth being a strong indicator of the growth mechanism. For the material investigated here, we find that the gold remains at the substrate–nanowire interface. This was not anticipated as the usual growth mechanism associated with catalyst growth is of a vapour–liquid–solid (VLS) type. The results presented here favour a vapour–solid (VS) growth mechanism instead. Copyright © 2007 John Wiley & Sons, Ltd.     

大长径比ZnS纳米线的制备、结构和生长机理

通过碳热辅助化学气相沉积法, 以Au作为催化剂, 在较低温度(800 益)制备了ZnS纳米线, 其尺寸均匀, 表面光滑, 直径约为40 nm, 具有很大的长径比, 是典型的单晶纤锌矿六方结构. 高分辨透射电镜和选区电子衍射分析表明, 纳米线的生长方向为[1100], 与已报道的生长方向不同. 纳米线的生长是由气-液-固(vapor-liquid-solid)机理控制的.     

Mn掺杂SnO_2一维纳米结构的制备、形貌及光学性质

用化学气相沉积(CVD)法制备了Mn掺杂的SnO2一维纳米结构(纳米线及纳米带),X射线衍射(XRD)显示样品为金红石型SnO2晶体,其生长机理可分别归结为气-液-固(VLS)和气-固(VS)机理,生长温度和气态原料浓度的差别是造成样品形貌及生长机理不同的主要原因.样品的拉曼谱出现了500、543、694和720cm-1四个新拉曼谱峰,分别是由活性的红外模和表面模引起的.纳米线及纳米带发光峰位于520nm处,发光强度随样品中氧空位的增减出现由强到弱的变化.     

One-step growth of Si3N4 stem-branch featured nanostructures: Morphology control by VS and VLS mode

We report here one-step synthesis of Si₃N₄ nanodendrites by selectively applying a vapor-solid (VS) and vapor-liquid-solid (VLS) strategy via direct current arc discharge method. The resultant nanodendrites were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy and X-ray powder diffraction. The spine-shaped nanodendrites were generated by a noncatalytic growth following a VS mode. The uniform secondary nanowire branches were epitaxial grown from two side surfaces of the nanowire stems. The pine-shaped nanodendrites were obtained through a catalytic growth in a VLS process. These branch nanowires were unsystematically grown from the nanocone-like stems. The photoluminescence spectra of the nanodendrites show a strong white light emission around 400-750 nm, suggesting their potential applications in light and electron emission devices.