Vibrational analysis of double-walled carbon nanotubes with inner and outer nanotubes of different lengths

In this study, the Euler-Bernoulli beam model is used to analyze the resonant vibration of double-walled carbon nanotubes (DWCNTs) with inner and outer nanotubes of different lengths. The resonant properties of DWCNTs with different inner and outer nanotube lengths are investigated in detail using this theoretical approach. The resonant vibration is significantly affected by the vibrational modes of the DWCNTs, and by the lengths of the inner and outer nanotubes. For an inner or outer nanotube of constant length, the vibrational frequencies of the DWCNTs increase initially and then decrease as the length of another nanotube increases. A design for nanoelectromechanical devices that operate at various frequencies can be realized by controlling the length of the inner and outer nanotubes of DWCNTs. This investigation may be helpful in applications of carbon nanotubes such as high frequency oscillators, dynamic mechanical analysis and mechanical sensors.     

Nonlinear free vibrations of curved double walled carbon nanotubes using differential quadrature method

Nonlinear free vibration analysis of curved double-walled carbon nanotubes (DWNTs) embedded in an elastic medium is studied in this study. Nonlinearities considered are due to large deflection of carbon nanotubes (geometric nonlinearity) and nonlinear interlayer van der Waals forces between inner and outer tubes. The differential quadrature method (DQM) is utilized to discretize the partial differential equations of motion in spatial domain, which resulted in a nonlinear set of algebraic equations of motion. The effect of nonlinearities, different end conditions, initial curvature, and stiffness of the surrounding elastic medium, and vibrational modes on the nonlinear free vibration of DWCNTs is studied. Results show that it is possible to detect different vibration modes occurring at a single vibration frequency when CNTs vibrate in the out-of-phase vibration mode. Moreover, it is observed that boundary conditions have significant effect on the nonlinear natural frequencies of the DWCNT including multiple solutions.     

Sound wave propagation in zigzag double-walled carbon nanotubes embedded in an elastic medium using nonlocal elasticity theory

In the present work, nonlocal Euler–Bernoulli beam theory is used to investigate the wave propagation in zigzag double-walled carbon nanotube (DWCNT) embedded in an elastic medium. Winkler-type foundation model is employed to simulate the interaction of the DWCNT with the surrounding elastic medium. The DWCNTs are considered as two nanotube shells coupled through the van der Waals interaction between them. It is noticed in the presented study that the equivalent Young’s modulus for zigzag DWCNT is derived using an energy-equivalent model. Influences of nonlocal effects, the chirality of zigzag DWCNT, Winkler modulus parameter, and aspect ratio on the frequency of DWCNT are analyzed and discussed. The new features of the vibration behavior of zigzag DWCNTs embedded in an elastic medium and some meaningful results in this paper are helpful for the application and the design of nanostructures in which zigzag DWCNTs act as basic elements.     

Catalyst-free growth of amorphous silicon nanowires by laser ablation

Carbon nanotubes (CNTs) appear to be ideal tip materials of atomic force microscopy (AFM) due to their small diameter and high stiffness. In this study, double-walled carbon nanotube (DWCNT) structures with different lengths of inner and outer layers are proposed as AFM tips. Both the vibration response and mode shapes of the tipped nanotubes under axial compression are studied by a theoretical nanobeam model. The results show that the natural frequencies of DWCNTs are significantly affected by the compressive loads and the length difference between the inner and outer nanotubes. The natural frequency associated with certain vibrational modes decreases with increasing compressive loads. This research may provide a useful reference for practical design for AFM tips with CNTs.     

On the vibrations of single-walled carbon nanotubes

In this paper, a detailed numerical study on the free and forced vibrations of single walled carbon nanotubes is presented. A simple and straightforward method developed such that the proximity of the mathematical model to the actual atomic structure of the nanotube is significantly retained, is used for this purpose. Both zigzag and armchair chiralities of the carbon nanotubes for clamped-free and clamped-clamped boundary conditions are analyzed and their natural frequencies and corresponding mode shapes are obtained. Results pertaining to axial, bending, and torsional modes of vibration are reported with discussions. These modes of vibration appear in the eigen-values and eigen-vectors without any distinction. The direct integration method by Newmark is used extensively along with the fast Fourier transform to identify different types of vibrational modes. In the case of zigzag nanotubes, the axial, bending, and torsional modes appear to be decoupled, whereas the armchair nanotubes show coupling between such modes.     

Nonlocal vibration analysis of nanomechanical systems resonators using circular double-layer graphene sheets

Double-layer graphene sheets (DLGSs) have potential applications as nanoelectromechanical systems (NEMS) resonators due to their specific carrier spectrum of electrons. In this study, analysis of the vibration modes of NEMS resonators using simply supported circular DLGSs has been undertaken based on nonlocal thin plate theory. Considering the properties of DLGSs, the vibration mode of circular DLGSs can be divided into an in-phase mode (IPM) and an anti-phase mode (APM). The range of resonance frequencies in the IPM is much larger than in the APM because of the influence of van der Waals forces. Nonlocal effects significantly influence the resonance frequency of circular DLGSs in higher vibration modes and at lower aspect ratios.     

Double-walled carbon nanotube with surrounding elastic medium under axial pressure

In this paper, the buckling behavior and critical axial pressure of double-walled carbon nanotubes (DWCNTs) with surrounding elastic medium are investigated. A double-shell (circular cylindrical shell) model is presented and the effects of surrounding elastic medium on the outer tube and the van der Waals forces between two adjacent tubes are taken into account. The analysis and the numerical solution method are based on the classical theory of plates and shells and the Galerkin method. Equations are derived for the critical axial forces and pressures of DWCNTs; the critical axial forces and pressures are calculated for different axial half sine wavenumbers and circumferential sine wavenumbers and compared with those for single-walled carbon nanotubes (SWCNTs).Results indicate that the critical axial force of a DWCNT is higher than that of an SWCNT, but the critical axial pressure of a DWCNT is lower than the critical axial pressure of a SWCNT. Although the critical axial force of a DWCNT decreases as the axial half sine wavenumbers increase, it rises as the circumferential sine wavenumbers increase.     

Vibrations of single- and double-walled carbon nanotubes with layerwise boundary conditions: A molecular dynamics study

In the present work, the vibration characteristics of single- and double-walled carbon nanotubes under various layerwise boundary conditions at different lengths are investigated. This is accomplished by the use of molecular dynamics simulations based on the Tersoff-Brenner and Lennard-Jones potential energy functions. The effects of initial tensile and compressive strains on the resonant frequency of carbon nanotubes are also taken into consideration. From the results generated, it is observed that the natural frequency of carbon nanotubes is strongly dependent on their boundary conditions especially when tubes are shorter in length. The natural frequency and its dependence on tube end conditions reduce by increasing the tube length. The natural frequency of DWCNTs lies between those of the constituent inner and outer SWCNTs and is nearer to those of the outer one. It is further observed that the natural frequency is highly sensitive to tensile and compressive strains. The frequency shift occurring in the presence of small initial strains is positive for tensile strains and negative for compressive strains. The results obtained provide valuable information for calibrating the small scaling parameter of the nonlocal models for the vibration problem of carbon nanotubes.     

Nonlinear vibration of a double-walled carbon nanotube embedded in a polymer matrix

In the current work, the nonlinear vibration of an embedded double-walled carbon nanotube (DWCNT) aroused by nonlinear van der Waals (vdW) interaction forces from both surrounding medium and adjacent tubes is studied. Using both Euler–Bernoulli and Timoshenko beam models, the relation between deflection amplitudes and resonant frequencies of the DWCNT is derived through harmonic balance method. It is found that the nonlinear vdW forces from the surrounding medium result in noncoaxial vibration of the embedded DWCNT. The noncoaxial vibration includes both uni-directional and bi-directional vibration modes. It is found that the surrounding matrix has more prominent effect on the uni-directional vibration in comparison to the bi-directional vibration. The axial load effect on the vibrational behavior of the embedded DWCNT is also discussed. Due to the influence of the surrounding polymer, the prediction on the resonant frequencies of embedded CNTs is quite different from that for free-standing CNTs. A softening behavior for the deflection amplitude-resonant frequency relation is observed for the first time in the bi-directional vibration of the embedded DWCNT, which can only be obtained using the Timoshenko beam theory.     

Analytical approaches for vibration analysis of multi-walled carbon nanotubes modeled as multiple nonlocal Euler beams

This paper concerns with the effect of small scale on the vibrational characteristics of multi-walled carbon nanotubes (MWCNTs) modeled as multiple nonlocal Euler beams. In this model, each nanotube interacts with its neighbors through the van der Waals force. Analytical approaches are expressed to solve coupled governing equations of the motion. Results for double- and five-walled carbon nanotubes (DWCNTs and FWCNTs), as two specific examples of MWCNTs, are presented for various boundary conditions. Then, effect of small scale on the natural and intertube resonant frequencies and their associated amplitude ratios are discussed. Besides the effect of small scale, the effect of end conditions on the vibrational properties and a comparison between the methods are provided. Natural and intertube frequencies reduce with the introduction of nonlocal parameter. However, reduction of intertube frequencies is less than the natural frequencies. Moreover, it is provided that the effect of small scale stiffens the van der Waals force and causes MWCNTs to behave similar to a single beam in high values of nonlocal parameter. Also, this study reveals that in high mode numbers, natural frequencies of a multiple classical Euler beams system tend to frequencies of its constituent beams.     

Free vibration of a single-walled carbon nanotube containing a fluid flow using the Timoshenko beam model

The flexural vibration of the fluid-conveying single-walled carbon nanotube (SWCNT) is derived by the Timoshenko beam model, including rotary inertia and transverse shear deformation. The effects of the flow velocity and the aspect ratio of length to diameter on the vibration frequency and mode shape of the SWCNT are analyzed. Results show that the effects of rotary inertia and transverse shear deformation result in a reduction of the vibration frequencies, especially for higher modes of vibration and short nanotubes. The frequency is also compared with the previous study based on Euler beam model. In addition, if the ratio of length to diameter increased to 60, the influence of the shear deformation and rotary inertia on the mode shape and the resonant frequencies can be neglected. However, the influence is very obvious when the ratio decreased to 20. As the flow velocity of the fluid increases in the vicinity of 2π, the SWCNT reveals the divergence instability. It regains stability when the flow velocity reaches about 9. As the velocity increases further, the SWCNT undergoes a coupled-mode flutter and results in a larger amplitude.     

Vibration characteristic analysis of buried pipes using the wave propagation approach

A theoretical analysis for the free vibration of simply supported buried pipes has been investigated using the wave propagation approach. The pipe modeled as a thin cylindrical shell of linear homogeneous isotropic elastic material buried in a linear isotropic homogeneous elastic medium of infinite extent. The vibrations of the pipe are examined by using Flüggle shell equation. The natural frequencies are obtained for the pipes surrounded by vacuo or elastic medium. The results are compared with those available in the literature and agreement is found with them. It is found that the free vibration frequency of the pipe does not appear for some of the axial or circular vibration modes and the real natural frequencies of the pipe are significantly dependent on the rigidity of the surrounding medium.     

Combined torsional buckling of double-walled carbon nanotubes with axial load in the multi-field coupled condition

The present study has theoretically investigated the combined torsional buckling of double-walled carbon nanotubes (DWCNTs) with axial load in the multi-field coupled condition. The effects of torsion, axial load, thermal-electrical change, surrounding elastic medium and the Van der Waals forces are all taken into consideration. The governing equation of buckling for CNTs subjected to thermo-electro-mechanical loadings has been established based on an elastic shell model of continuum mechanics. Reasonable s...     

Cartesian Dynamics of Simple Molecules VI Centrosymmetric Linear Pentatomics

A simple spring model for molecular vibrations, which uses Cartesian co-ordinates for both longitudinal and transverse displacements, is applied to centresymmetric linear pentatomic molecules such as carbon suboxide and carbon subsulphide. Analytical expressions for the four stretching and three bending mode frequencies are derived in terms of seven independent force constants. By substitution of Raman and infrared frequencies, values of these force constants are obtained and briefly discussed. Eigenvectors of the normal modes and eigenfrequencies of various isotopic species are also calculated.     

Two-degree-of-freedom rotational-pendulum vibration absorbers

This paper presents experimental as well as analytic results on a rotational-pendulum vibration absorber. The characteristic frequencies of the absorber can be tuned dynamically by adjusting the rotational speed. The device is coupled to the primary structure through a mechanical spring, thus possessing two natural modes of vibrations in the vertical plane. When the primary structure is excited by a harmonic disturbance of which the frequency matches one of the two natural frequencies, the oscillations will be minimized. Whether the pendulum absorber is operating in a resonant mode can be detected by measuring the phase difference between the motions of the primary structure and the absorber, which provides an efficient way to tune the rotational speed for optimal performance. Experimental results confirm the theoretical developments and also demonstrate the effectiveness of the proposed scheme.     

Experimental and numerical investigations of resonant vibration characteristics for piezoceramic plates.

Electronic speckle pattern interferometry (ESPI) is a full field, non-contact technique for measuring the surface displacement of a structure subjected to static loading or, especially, to dynamic vibration. In this article we employ an optical system called the amplitude-fluctuation ESPI with out-of-plane and in-plane measurements to investigate the vibration characteristics of piezoceramic plates. Two different configurations of piezoceramic plates, namely the rectangular and the circular plates, are discussed in detail. As compared with the film recording and optical reconstruction procedures used for holographic interferometry, the interferometric fringes of AF-ESPI are produced instantly by a video recording system. Because the clear fringe patterns will be shown only at resonant frequencies, both the resonant frequencies and the corresponding mode shapes are obtained experimentally at the same time by the proposed AF-ESPI method. Excellent quality of the interferometric fringe patterns for both the in-plane and out-of-plane vibration mode shapes is demonstrated. The resonant frequencies of the piezoceramic plates are also measured by the conventional impedance analysis. From experimental results, we find that the out-of-plane vibration modes (type A) with lower resonant frequencies cannot be measured by the impedance analysis and only the in-plane vibration modes (type B) will be shown. However, both the out-of-plane (bending) and in-plane (extensional) vibration modes of piezoceramic plates are obtained by the AF-ESPI method. Finally, the numerical finite element calculations are also performed, and the results are compared with the experimental measurements. It is shown that the numerical calculations and the experimental results agree fairly well for both the resonant frequencies and the mode shapes.     

二维振动方向变换器的耦合振动及其等效电路

二维振动方向变换器集功率合成和二维超声输出的功能于一体,在功率超声技术中具有重要的应用价值。然而,对于二维振动方向变换器的设计分析只有一种较为复杂的波动方程法。为此,本文研究了二维振动方向变换器的另外一种简明的设计分析方法——等效电路法。通过引入二维机械耦合系数和纵向力转换系数,利用力电类比原理建立了二维振动方向变换器的同相及反相二维耦合振动的统一等效电路模型。利用本文提出的设计方法,计算了两种不同材料的二维振动方向变换器的谐振频率,与有限元计算结果及实验测试结果一致,为该类超声振动系统的工程应用提供了一种简洁直观的设计分析方法。      

利用径向呼吸模及其倍频模的共振特性精确测定单壁碳纳米管的电子跃迁能量

提出一个根据拉曼基频模及其倍频模的斯托克斯和反斯托克斯拉曼成分的不同共振行为来探测样品与激光共振的系统能级的方法.此方法被应用到不均匀单壁碳纳米管束样品中某一径向呼吸模频率为219波数的金属型碳纳米管.通过分析呼吸模及其倍频模和切向模的共振行为,获得了该碳纳米管的电子跃迁能量,并获得纳米管C-C最近邻重叠积分因子为2.80 eV.此数值可以很好的解释单壁碳纳米管径向呼吸模的共振行为. 关键词： 单壁碳纳米管 呼吸模 共振拉曼散射 电子跃迁能     

The influence of surface effect on vibration behaviors of carbon nanotubes under initial stress

An analytical method is presented to solve the influence of surface effect on non-coaxial resonance of multi-walled carbon nanotubes embedded in matrix utilizing laminated structures model. Due to coupled van der Waals forces between adjacent tubes and surface effect exerted carbon nanotubes, the resonance frequencies and amplitude ratios of multi-walled carbon nanotubes under initial stresses show that the resonant characteristics of the multi-walled carbon nanotubes become complex and the numbers of vibrational modes do not keep increase under identical conditions after considering surface effects. The result obtained can be used as a beneficial reference for investigating the electronic and physical behaviors of carbon nanotubes.