含氟丙烯酸酯三元共聚物乳液的研究

以丙烯酸全氟烷基酯 (ZonylTM)、甲基丙烯酸甲酯 (MMA)、丙烯酸丁酯 (BA)为原料 ,在阴离子乳化体系中制备了含氟丙烯酸三元共聚物乳液 .研究了聚合反应动力学、转化率的各种影响因素 ,得出了聚合速率方程 ,并得出反应的表观活化能 (Ea)为 5 0 75 8kJ mol.考察了乳液的稀释稳定性、贮存稳定性、离心稳定性、耐热、耐寒稳定性 ,及乳胶膜的吸水性和耐溶剂性 .并用Wilhelmy方法测定了乳胶膜与水的接触角 ,结果表明乳胶膜对水的抗浸润力大大提高     

苯乙烯-丙烯酸酯-丙烯腈三元共聚物的合成及表征

在可控核聚变领域,惯性约束聚变(ICF)用空心靶球的研究[1-3]十分活跃。以聚苯乙烯为基材制备ICF有机物空心靶球已有广泛的研究,微球的制备技术、工艺等都已相当成熟,但聚苯乙烯阻气性差,难以阻挡氢同位素的扩散,不能满足ICF靶球的需要。目前应用比较好的ICF靶球制备条件极为苛刻,工艺复杂[4]。丙烯腈、丙烯酸酯、偏二氯乙烯、醋酸乙烯酯等一类单体的均聚物都有较好的阻气性[5],本文探讨苯乙烯与丙烯腈、丙烯酸酯类单体的共聚方法,研究了共聚物的一些基本性能。1　实验部分1 1　试剂及仪器苯乙烯、丙烯腈、丙烯酸甲酯、丙烯酸丁酯均…     

丙烯酸酯-乙酸乙烯酯共聚物压敏粘合剂的合成及性能

丙烯酸酯-乙酸乙烯酯共聚物压敏粘合剂的合成及性能     

含氟/硅丙烯酸酯乳液的合成进展

含氟丙烯酸酯聚合物具有良好的成膜性、光泽性、柔韧性、耐污性及耐腐蚀性,广泛应用于防腐耐候涂料。但其对基体的附着性差,对颜料、填料的润湿性差,不耐低温,加之含氟丙烯酸酯单体价格昂贵,大量使用受到限制。含氟/硅丙烯酸酯共聚物不仅兼备了含氟聚合物的诸多优良性能,而且能有效地提高与基体的附着力并降低聚合物成本。本文综述了氟/硅改性丙烯酸酯乳液常用单体;核壳型乳胶粒的结构及影响因素;氟/硅丙烯酸酯共聚物合成路线。     

聚含氟丙烯酸酯-聚氨酯三嵌段共聚物水基分散体的合成及膜结构

聚含氟丙烯酸酯-聚氨酯三嵌段共聚物水基分散体的合成及膜结构;含氟丙烯酸酯;水性聚氨酯分散体;表面结构;核壳分散体     

含氟丙烯酸酯共聚物的合成与表征

本文以丙烯酸丁酯(BA)和1,1,5-三氢全氟戊基丙烯酸酯 (OFPA)为主要单体,甲基丙烯酸缩水甘油酯(GMA)为活性单体,采用间歇式滴加乳液聚合法合成了含氟丙烯酸酯共聚物.采用红外光谱法和X-射线光电子能谱法对共聚物的结构进行了表征,对共聚物的凝胶含量、耐水、耐溶剂性能以及热性能进行了测试.结果表明共聚物具有良好的耐水和耐溶剂性能,共聚物中保持一定的凝胶率可降低其表面粘性,有利于后期混炼加工;DSC测得的共聚物的玻璃化转变温度可低于-30℃,保持了较好的低温性能.     

纳米SiO2/含氟丙烯酸酯共聚物复合乳液的制备与性能及聚合动力学研究

采用原位聚合法制备纳米SiO2/含氟丙烯酸酯共聚物复合乳液,研究了其聚合反应动力学,并通过红外光谱(IR)、透射电子显微镜(TEM)、热失重(TGA)等方法表征所得产物的结构及形态、乳胶膜的耐热性能和表面性能.研究结果显示,聚合反应的表观活化能为83.15 kJ/mol,纳米SiO2/含氟丙烯酸酯共聚物复合粒子呈现出明显的核壳结构,纳米SiO2粒子的引入不仅改善了聚合物的耐热性能,也在一定程度上提高了乳胶膜的抗水性.对膜表面自由能的组成分析表明,与一般含氟乳胶膜的表面自由能的情况相反,该乳胶膜的表面能是由较大的极性部分和较小的色散部分组成.     

核壳型含氟丙烯酸酯共聚物的合成及性能

采用饥饿态半连续种子乳液聚合方法, 在十二烷基硫酸钠(SDS)/辛基苯基聚氧乙烯醚(TX-10)复合乳化剂的作用下, 分别选用甲基丙烯酸三氟乙酯(TFEM)、甲基丙烯酸六氟正丁酯(HFBM)和甲基丙烯酸十二氟庚酯(DFHM)为含氟单体, 合成以丙烯酸正丁酯(BA)、甲基丙烯酸甲酯(MMA)和含氟单体为原料的核壳型结构含氟丙烯酸酯共聚物乳液. FTIR, 1H NMR, TEM和DSC分析结果显示, 获得了BA/MMA/含氟单体的共聚物乳液, 且乳液具有明显的核壳结构. DSC, TGA和SEM-EDX的分析显示, 核壳型结构的共聚物具有优异的热力学稳定性能和成膜性能; 长侧链或短侧链含氟单体对共聚物的热稳定性影响不明显, 但侧链较长的含氟单体所获得的聚合物在成膜过程中更易向表面迁移, 更能体现含氟聚合物的优点.     

自交联型含氟丙烯酸酯共聚物的合成与表征

含氟丙烯酸酯;自交联;无皂乳液;接触角滞后     

水性丙烯酸酯共聚物交联体系的流变性

用旋转粘度计研究了甲基丙烯酸甲酯／丙烯酸丁酯／丙烯酸三元共聚物水性交联体系的流变性，考察了树脂含量、金属鳌合物含量和氨水水化对其流变性的影响。结果表明：三元共聚物水性交联体系呈非牛顿流体流变行为，具有剪切变稀特性；随树脂含量或鳌合物含量增加，体系的增稠能力得以增强；水化不仅可改善体系的增稠性能，而且可增强体系的非牛顿流变性。     

(Meth)acrylate vinyl ester hybrid polymerizations

In this study, vinyl ester monomers were synthesized by an amine catalyzed Michael addition reaction between a multifunctional thiol and the acrylate double bond of vinyl acrylate. The copolymerization behavior of both methacrylate/vinyl ester and acrylate/vinyl ester systems was studied with near‐infrared spectroscopy. In acrylate/vinyl ester systems, the acrylate groups polymerize faster than the vinyl ester groups resulting in an overall conversion of 80% for acrylate double bonds in the acrylate/vinyl ester system relative to only 50% in the bulk acrylate system. In the methacrylate/vinyl ester systems, the difference in reactivity is even more pronounced resulting in two distinguishable polymerization regimes, one dominated by methacrylate polymerization and a second dominated by vinyl ester polymerization. A faster polymerization rate and higher overall conversion of the methacrylate double bonds is thus achieved relative to polymerization of the pure methacrylate system. The methacrylate conversion in the methacrylate/vinyl ester system is near 100% compared to only ～60% in the pure methacrylate system. Utilizing hydrophilic vinyl ester and hydrophobic methacrylate monomers, polymerization‐induced phase separation is observed. The phase separated domain size is in the order of ～1 μm under the polymerization conditions. The phase separated domains become larger and more distinct with slower polymerization and correspondingly increased time for diffusion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2509–2517, 2009     

核-壳型聚丙烯酸酯复合乳液

简述了核-壳型聚丙烯酸酯复合乳液的合成方法、形态及其影响因素与判断方法、结构与性能等方面的研究进展;认为核-壳型复合乳液膜机械性能优良的原因是:核、壳两相间存在的过渡区适当地抑制了二者的相分离。     

淀粉-磺甲基化聚丙烯酰胺接枝共聚物的合成及性能

用淀粉-聚丙烯酰胺接枝共聚物(S-g-PAM)同多聚甲醛及亚硫酸钠反应,合成了淀粉-磺甲基化聚丙烯酰胺接枝共聚物(S-g-SPAM)。该磺化物的水溶液在试验浓度范围内(0.1～1.0％),为假塑性流体,对高岭土悬浮液的絮凝,由沉降速度,上层清液相对吸光度可知,S-g-SPAM(接枝链分子量为1.03×10⁵,磺甲基化度30％)的絮凝能力优于相应的未磺化的S-g-PAM,也比聚丙烯酰胺(分子量2.5×10⁶)强。     

(甲基)丙烯酸氟烷基酯的“活性”/可控聚合

带氟烷基侧链的(甲基)丙烯酸氟烷基酯聚合物是一类具有独特表面性能和光学特性的氟聚合物,传统的自由基共聚合由于无法调节聚合物的微细结构和氟原子的分布,限制了该类聚合物在更广领域的应用.活性聚合为聚合物分子设计和合成提供了一个有效方法,利用活性聚合方法可以获得预期结构和性能的含氟嵌段聚合物材料.由于引入了氟烷基侧链,(甲基)丙烯酸氟烷基酯的活性聚合又有其特殊性,本文针对它的活性阴离子聚合、基因转移聚合、活性自由基聚合等方面作一综述.     

Templating Polymerization of Dodecylammonium Surfactants with Polymerizable (Meth)acrylate Counter Ions

Both dodecylammonium acrylate (I) and dodecylammonium methacrylate (II) are reactive surfactants in which the polymerizable group is the organic counterion. Templating polymerization of I and II from the lyotropic liquid crystalline (LLC) lamellar phase was successfully performed with conservation of the supramolecular structure. A 20 wt% aqueous solution of II formed cubic bicontinuous phases, even upon addition of divinyl benzene (DVB). Polymerization from the cubic phases was attempted without and with DVB (3 wt%). Bicontinuous cubic phases always evolved toward lamellar structures upon polymerization.     

P(MMA-co-AA)乳液的制备及pH响应特性

以过硫酸钾(KPS)为引发剂、十二烷基硫酸钠(SDS)为乳化剂,利用正相乳液聚合制备(甲基丙烯酸甲酯-co-丙烯酸)共聚物(P(MMA-co-AA))乳液.通过测定聚合转化率和观察聚合过程稳定性,探讨了AA与MMA不同质量比时制备稳定的共聚物乳液的工艺条件;通过黏度法测定了乳液在不同pH时的相对黏度η,利用粒度分析仪分析了乳胶粒子在不同pH时的平均粒径和粒径分布.结果表明:AA含量较高时,控制聚合时间是得到稳定聚合物乳液的关键,当m(AA)/m(MMA)=12.5/100,65 ℃下反应120 min时,所制得的乳液稳定性最好.随着pH增大,乳液黏度先增大后降低;随着m(AA)/m(MMA)增加,制得的乳液pH敏感性增大;随着乳液从酸性(pH=5.17)变到碱性(pH=8.61),聚合物乳胶粒子平均粒径减小,粒径分布变窄.     

含氟两亲性嵌段聚合物乳液的合成

以聚乙二醇单甲醚(MPEG)为原料,与2-溴异丁酰溴经酯化反应合成了端基为溴原子的MPEG-Br;以MPEG-Br为大分子引发剂,甲基丙烯酸十二氟庚酯经电子活化再生原子转移自由基乳液聚合法合成了新型的含氟两亲性嵌段聚合物(1)乳液,其结构经1H NMR,IR和X-射线光电子能谱(XPS)表征。接触角测量结果表明:1可改变岩心的润湿性,由强液湿转变为气湿。     

Direct access to functional (Meth)acrylate copolymers through transesterification with lithium alkoxides

A straightforward and efficient synthetic method that transforms poly(methyl methacrylate) (PMMA) into value‐added materials is presented. Specifically, PMMA is modified by transesterification to produce a variety of functional copolymers from a single starting material. Key to the reaction is the use of lithium alkoxides, prepared by treatment of primary alcohols with LDA, to displace the methyl esters. Under optimized conditions, up to 65% functionalization was achieved and copolymers containing alkyl, alkene, alkyne, benzyl, and (poly)ether side groups could be prepared. The versatility of this protocol was further demonstrated through the functionalization of both PMMA homo and block copolymers obtained through either radical polymerization (traditional and controlled) or anionic procedures. The scope of this strategy was illustrated by extension to a range of architectures and polymer backbones. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1566–1574     

Syntheses and Surface Properties of Polyacrylonitrile-based Copolymer Membranes Containing Sugar Moieties

Introduction Asatypeofwidelyusedmembranematerials, polyacrylonitrile(PAN)hasbeeninvestigatedby manyresearchersinthefieldsofpervaporation,ul- trafiltration,anddialysis[1_4].However,PAN- basedmembranesarerelativelyhydrophobicwitha lowbiocompatibility.Thesepropertieslimittheir furtherapplicationsinaqueoussolutionseparation andtheirusageasbiomedicaldevices.Muchatten- tionhasbeenpaidtoimprovingthecharacteristics ofPAN-basedmembranes.Thecopolymerization ofANwithhydrophilicmonomersisconsideredas…