Laser ablation of ternary As‐S‐Se glasses and time‐of‐flight mass spectrometric study

Ternary chalcogenide As‐S‐Se glasses, important for optics, computers, material science and technological applications, are often made by pulsed laser deposition (PLD) technology but the plasma composition formed during the process is mostly unknown. Therefore, the formation of clusters in a plasma plume from different glasses was followed by laser desorption ionization (LDI) or laser ablation (LA) time‐of‐flight mass spectrometry (TOF MS) in positive and negative ion modes. The LA of glasses of different composition leads to the formation of a number of binary As_pS_q, As_pSe_r and ternary As_pS_qSe_r singly charged clusters. Series of clusters with the ratio As:chalcogen = 3:3 (As₃S, As₃S₂Se⁺, As₃SSe), 3:4 (As₃S, As₃S₃Se⁺, As₃S₂Se, As₃SSe, As₃Se), 3:1 (As₃S⁺, As₃Se⁺), and 3:2 (As₃S, As₃SSe⁺, As₃Se), formed from both bulk and PLD‐deposited nano‐layer glass, were detected. The stoichiometry of the As_pS_qSe_r clusters was determined via isotopic envelope analysis and computer modeling. The structure of the clusters is discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Laser desorption ionization of red phosphorus clusters and their use for mass calibration in time‐of‐flight mass spectrometry

Phosphorus clusters P_n (n = 1–89) are easily formed from red phosphorus by laser desorption ionization (LDI) and they cover a range of up to approx. m/z 3000 in both positive and negative ion mode. The clusters are singly charged and the spectra are simple because phosphorus is monoisotopic. The mass spectra can be measured with an acceptable resolution and intensity. The use of positively charged P_n clusters for calibration in mass spectrometry was examined and it was demonstrated that in external calibration a standard deviation of ±0.04 m/z units can be achieved even when using a common commercial matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) instrument. When used as internal standards the P_n clusters react with some analytes – C₆₀ and C₇₀ fullerenes and cucurbituril[8], for example. It was also found that red phosphorus is a suitable MALDI matrix for peptides and proteins, illustrated by the examples of a Calmix mixture of bradykinin, angiotensin, renin, adrenocorticotropic hormone ACTH fragment 18‐359 and insulin, and of insulin alone. Copyright © 2009 John Wiley & Sons, Ltd.     

Aquatic fulvic acid as a matrix for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric analysis

Aquatic fulvic acids (AFAs) are demonstrated to be effective matrices for the analysis of various polar compounds (ranging from 100–1500 Da) by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOFMS). The efficiency of AFA as a matrix is shown for a wide range of test compounds, including a number of carbohydrates, cyclodextrins and peptides, with typical detection limits of ～10 µg mL^?1. The propensity of AFA to enhance ionization through protonation of peptides, and formation of sodium and potassium adducts of carbohydrates and polyethylene glycol, was noted. Differences were observed in the performances of the two AFA matrices used, a Suwannee River, International Humic Substances Society (IHSS) standard and a locally extracted fulvic acid (LFA). For example, in the analysis of carbohydrate standards, the use of the LFA matrix typically doubled the analyte ion signal intensities and resulted in signal‐to‐noise (S/N) ratios that were 2–4 times better than when the Suwannee River AFA matrix was used. AFA was also used in the analysis of real‐world samples without extraction or purification; cantaloupe juice and acetaminophen tablets were analyzed, and glucose and acetaminophen could easily be identified as respective components. When lower concentrations of fulvic acid were used in the presence of sugars, a reversal of roles was observed in which the sugars functioned as the matrix and significantly enhanced ionization of the AFA components, while ions associated with the sugars themselves were suppressed or absent. Effective as a matrix for a variety of analytes and widely available, AFA is an attractive environmentally friendly choice for use in MALDI applications. Copyright © 2006 John Wiley & Sons, Ltd.     

Quantification of hepcidin using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Hepcidin is known to be a key systemic iron‐regulatory hormone which has been demonstrated to be associated with a number of iron disorders. Hepcidin concentrations are increased in inflammation and suppressed in hemochromatosis. In view of the role of hepcidin in disease, its potential as a diagnostic tool in a clinical setting is evident. This study describes the development of a matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) assay for the quantitative determination of hepcidin concentrations in clinical samples. A stable isotope labeled hepcidin was prepared as an internal standard and a standard quantity was added to urine samples. Extraction was performed with weak cation‐exchange magnetic nanoparticles. The basic peptides were eluted from the magnetic nanoparticles using a matrix solution directly onto a target plate and analyzed by MALDI‐TOF MS to determine the concentration of hepcidin. The assay was validated in charcoal stripped urine, and good recovery (70–80%) was obtained, as were limit of quantitation data (5 nmol/L), accuracy (RE <10%), precision (CV <21%), within ‐day repeatability (CV <13%) and between‐day repeatability (CV <21%). Urine hepcidin levels were 10 nmol/mmol creatinine in healthy controls, with reduced levels in hereditary hemochromatosis (P < 0.000005) and elevated levels in inflammation (P < 0.0007). In summary a validated method has been developed for the determination of hepcidin concentrations in clinical samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Solvent selection for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric analysis of synthetic polymers employing solubility parameters

The principle relating to the selection of a proper matrix, cationization reagent, and solvent for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) of synthetic polymers is still a topic of research. In this work we focused on the selection of a suitable MALDI solvent. Polystyrene PS7600 and poly(ethylene glycol) PEG4820 were analyzed by MALDI‐TOF MS using various solvents which were selected based on the Hansen solubility parameter system. For polystyrene (PS), dithranol was used as the matrix and silver trifluoroacetate as the cationization reagent whereas, for poly(ethylene glycol) (PEG), the combination of 2,5‐dihydroxybenzoic acid and sodium trifluoroacetate was used for all experiments. When employing solvents which dissolve PS and PEG, reliable MALDI mass spectra were obtained while samples in non‐solvents (solvents which are not able to dissolve the polymer) failed to provide spectra. It seems that the solubility of the matrix and the cationization reagent are less important than the polymer solubility. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry for the study of Helicobacter pylori

The characteristics of matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry based investigation of extremely variable bacteria such as Helicobacter pylori were studied. H. pylori possesses a very high natural variability. Accurate tools for species identification and epidemiological characterization could help the scientific community to better understand the transmission pathways and virulence mechanisms of these bacteria. Seventeen clinical as well as two laboratory strains of H. pylori were analyzed by the MALDI Biotyper method for rapid species identification. Mass spectra collected were found containing 7–13 significant peaks per sample, and only six protein signals were identical for more than half of the strains. Four of them could be assigned to ribosomal proteins RL32, RL33, RL34, and RL36. The reproducible peak with m/z 6948 was identified as a histidine‐rich metal‐binding polypeptide by tandem mass spectrometry (MS/MS). In spite of the evident protein heterogeneity of H. pylori the mass spectra collected for a particular strain under several cultivations were highly reproducible. Moreover, all clinical strains were perfectly identified as H. pylori species through comparative analysis using the MALDI Biotyper software (Bruker Daltonics, Germany) by pattern matching against a database containing mass spectra from different microbial strains (n = 3287) including H. pylori 26695 and J99. The results of this study allow the conclusion that the MALDI‐TOF direct bacterial profiling is suited for H. pylori identification and could be supported by mass spectra fragmentation of the observed polypeptide if necessary. Copyright © 2010 John Wiley & Sons, Ltd.     

A small high‐irradiance laser ionization time‐of‐flight mass spectrometer

A small high‐irradiance laser ionization time‐of‐flight mass spectrometer (LI‐TOFMS) with orthogonal sample introduction was described. High irradiance of 6 × 10¹⁰ W/cm² at 532 nm from a Nd : YAG laser was applied in the experiment to get a high ionization degree in plasma and to dissociate the interferential polyatomic ions. Meanwhile, the interferential multiply charged ions resulted by high‐irradiance were nearly eliminated in the spectrum by utilizing helium as the buffer gas in the ion source due to three‐body recombination, which resulted in a relatively clean background. Improved signal stability was obtained by automated step moving of the sample stage in short time intervals. By using two sets of Einzel lens in transport system, nearly uniform relative sensitivity coefficients (RSCs) were achieved for most of metal elements including light ions which were detected in extremely low sensitivity in previous hexapole transportation instrument. The resolving power reaches 2200, and the detection limits (DLs) are 10^?6 g/g for metal elements in the steel standard. Copyright © 2009 John Wiley & Sons, Ltd.     

Detection of pathogenic Verticillium spp. using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Verticillium spp. have been listed by the European and Mediterranean Plant Protection Organization (EPPO) and China as plant quarantine pests. Although attempts have been made to develop a simple routine laboratory assay to detect these organisms, none are routinely used. We describe for the first time a robust assay for reliable identification of Verticillium spp. using protein fingerprinting data obtained by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry(MALDI‐TOF‐MS). Several sample preparation methods and matrices were investigated to improve mass spectra for the routine identification of six species of Verticillium spp.(Verticillium dahiliae, V. alboatrum, V. fungicola, V. nigrescens, and V. lecanii) by MALDI‐TOF‐MS. Using the optimized experimental method, we constructed a protein fingerprint database for six species of Verticillium and established a analysis criteria of log(Score). This MALDI‐TOF‐MS protocol should prove useful as a rapid and reliable assay for distinguishing different Verticillium spp. Copyright © 2009 John Wiley & Sons, Ltd.     

Modern MALDI time‐of‐flight mass spectrometry

This paper focuses on development of time‐of‐flight (TOF) mass spectrometry in response to the invention of matrix‐assisted laser desorption/ionization (MALDI). Before this breakthrough ionization technique for nonvolatile molecules, TOF was generally considered as a useful tool for exotic studies of ion properties but was not widely applied to analytical problems. Improved TOF instruments and software that allow the full potential power of MALDI to be applied to difficult biological applications are described. A theoretical approach to the design and optimization of MALDI‐TOF instruments for particular applications is presented. Experimental data are provided that are in excellent agreement with theoretical predictions of resolving power and mass accuracy. Data on sensitivity and dynamic range using kilohertz laser rates are also summarized. These results indicate that combinations of high‐performance MALDI‐TOF and TOF‐TOF with off‐line high‐capacity separations may ultimately provide throughput and dynamic range several orders of magnitude greater than those currently available with electrospray LC‐MS and MS‐MS. Copyright © 2009 John Wiley & Sons, Ltd.