Dual‐responsive supramolecular inclusion complexes of block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] with α‐cyclodextrin

A new class of temperature and pH dual‐responsive and injectable supramolecular hydrogel was developed, which was formed from block copolymer poly(ethylene glycol)‐block‐poly[(2‐dimethylamino)ethyl methacrylate] (PEG‐b‐PDMAEMA) and α‐cyclodextrin (α‐CD) inclusion complexes (ICs). The PEG‐b‐PDMAEMA diblock copolymers with different ratio of ethylene glycol (EG) to (2‐dimethylamino)ethyl methacrylate (DMAEMA) (102:46 and 102:96, respectively) were prepared by atom transfer radical polymerization (ATRP). ¹H NMR measurement indicated that the ratio of EG unit to α‐CD in the resulted ICs was higher than 2:1. Thermal analysis showed that thermal stability of ICs was improved. The rheology studies showed that the hydrogels were temperature and pH sensitive. Moreover, the hydrogels were thixotropic and reversible. The self‐assembly morphologies of the ICs in different pH and ionic strength environment were studied by transmission electron microscopy. The formed biocompatible micelles have potential applications as biomedical and stimulus‐responsive material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2143–2153, 2010     

Thermoresponsive hyperbranched polymers via In Situ RAFT copolymerization of peg‐based monomethacrylate and dimethacrylate monomers

Here we report the preparation of PEG‐based thermoresponsive hyperbranched polymers via a facile in situ reversible addition‐fragmentation chain transfer (RAFT) copolymerization using bis(thiobenzoyl) disulphide to form 2‐cyanoprop‐2‐yl dithiobenzoate in situ. This novel one‐pot in situ RAFT approach was studied firstly using methyl methacrylate (MMA) monomer, then was used to prepare thermoresponsive hyperbranched polymers by copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, M_n = 475), poly(propylene glycol) methacrylate (PPGMA, M_n = 375) and up to 30 % of ethylene glycol dimethacrylate (EGDMA) as the branching agent. The resultant PEGMEMA‐PPGMA‐EGDMA copolymers from in situ RAFT were characterized by Gel Permeation Chromatography (GPC) and ¹H‐NMR analysis. The results confirmed the copolymers with multiple methacrylate groups and hyperbranched structure as well as RAFT functional residues. These water‐soluble copolymers with tailored compositions demonstrated tuneable lower critical solution temperature (LCST) from 22 °C to 32 °C. The phase transition temperature can be further altered by post functionalization via aminolysis of RAFT agent residues in polymer chains. Moreover, it was demonstrated by rheological studies and particle size measurements that these copolymers can form either micro‐ or macro photocrosslinked gels at suitable concentrations due to the presence of multiple methacrylate groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3751–3761     

Thermoresponsive PPEGMEA‐g‐PPEGEEMA well‐defined double hydrophilic graft copolymer synthesized by successive SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) backbone and poly[poly(ethylene glycol) ethyl ether methacrylate] (PPEGEEMA) side chains were synthesized by the combination of single electron transfer‐living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained comb copolymer was treated with lithium diisopropylamide and 2‐bromoisobutyryl bromide to give PPEGMEA‐Br macroinitiator. Finally, PPEGMEA‐g‐PPEGEEMA graft copolymers were synthesized by ATRP of poly(ethylene glycol) ethyl ether methacrylate macromonomer using PPEGMEA‐Br macroinitiator via the grafting‐from route. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept narrow (M_w/M_n ≤ 1.20). This kind of double hydrophilic copolymer was found to be stimuli‐responsive to both temperature and ion (0.3 M Cl^? and SO). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 647–655, 2010     

Synthesis of superparamagnetic and thermoresponsive hybrid nanoparticles via surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate

A reversible addition‐fragmentation chain transfer (RAFT) agent was directly anchored onto superparamagnetic Fe₃O₄ nanoparticles (SPNPs) in a simple procedure using a ligand exchange reaction of 2‐[(dodecylsulfanylcarbonylthiolsulfanyl) propionic acid] (DCPA) with oleic acid initially present on the surface of Fe₃O₄ nanoparticles. The DCPA‐modified SPNPs were then used for the surface‐mediated RAFT polymerization of di(ethylene glycol) ethyl ether acrylate and (oligoethylene glycol) methyl ether acrylate to fabricate structurally well‐defined hybrid SPNPs with temperature‐responsive poly[di(ethylene glycol) ethyl ether acrylate‐co‐(oligoethylene glycol) methyl ether acrylate] shell and magnetic Fe₃O₄ core. Evidence of a well‐controlled surface‐mediated RAFT polymerization was gained from a linear increase of number‐average molecular weight with overall monomer conversions and relatively narrow polydispersity indices of the copolymers grown from the SPNPs. The resultant hybrid nanoparticles exhibited superparamagnetic property with a saturation magnetization of 55.1–19.4 emu/g and showed a temperature‐responsive phenomenon as the temperature changed between 25 and 40 ^°C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3420–3428     

PPEGMEA‐g‐PDEAEMA: Double hydrophilic double‐grafted copolymer stimuli‐responsive to both pH and salinity

A series of well‐defined double hydrophilic double‐grafted copolymers, consisting of polyacrylate backbone, hydrophilic poly(2‐(diethylamino)ethyl methacrylate) and poly(ethylene glycol) side chains, were synthesized by successive atom transfer radical polymerization. The backbone, poly[poly(ethylene glycol) methyl ether acrylate] (PPEGMEA) comb copolymer, was firstly prepared by ATRP of PEGMEA macromonomer via the grafting‐through route followed by reacting with lithium diisopropylamide and 2‐bromopropionyl chloride to give PPEGMEA‐Br macroinitiator of ATRP. Finally, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(2‐(diethylamino)ethyl methacrylate) graft copolymers were synthesized by ATRP of 2‐(diethylamino)ethyl methacrylate using PPEGMEA‐Br macroinitiator via the grafting‐from route. Poly(2‐(diethylamino)ethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections, which is tolerant of both acidic and basic environment. The molecular weights of both backbone and side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.39). The results of fluorescence spectroscopy, dynamic laser light scattering and transmission electron microscopy showed this double hydrophilic copolymer was stimuli‐responsive to both pH and salinity. It can aggregate to form reversible micelles in basic surroundings which can be conveniently dissociated with the addition of salt at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3142–3153, 2009     

Preparation and characterization of macroporous poly(N‐isopropylacrylamide) hydrogels for the controlled release of proteins

Macroporous, temperature‐sensitive poly(N‐isopropylacrylamide) (PNIPAAm) hydrogels were synthesized with poly(ethylene glycol)s (PEGs; molecular weight = 2000–6000) as the pore‐forming agents. The influence of the molecular weight and PEG content on the responsive kinetics of these macroporous hydrogels was investigated. The PEG‐modified PNIPAAm hydrogels were characterized by the swelling ratio, deswelling–reswelling kinetics, Fourier transform infrared, and differential scanning calorimetry. The morphology of these hydrogels was analyzed with scanning electron microscopy. The prepared macroporous hydrogels exhibited some unique properties in comparison with the gels with low molecular weight PEGs (molecular weight < 2000) as the pore‐forming agents. In addition, a preliminary study on the controlled release of bovine serum albumin from these macroporous hydrogels was carried out. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 152–159, 2003     

New Linear and Star‐Shaped Thermogelling Poly([R]‐3‐hydroxybutyrate) Copolymers

The synthesis of multi‐arm poly([R]‐3‐hydroxybutyrate) (PHB)‐based triblock copolymers (poly([R]‐3‐hydroxybutyrate)‐b‐poly(N‐isopropylacrylamide)‐b‐[[poly(methyl ether methacrylate)‐g‐poly(ethylene glycol)]‐co‐[poly(methacrylate)‐g‐poly(propylene glycol)]], PHB‐b‐PNIPAAM‐b‐(PPEGMEMA‐co‐PPPGMA), and their subsequent self‐assembly into thermo‐responsive hydrogels is described. Atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide (NIPAAM) followed by poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and poly(propylene glycol) methacrylate (PPGMA) was achieved from bromoesterified multi‐arm PHB macroinitiators. The composition of the resulting copolymers was investigated by ¹H and ¹³C J‐MOD NMR spectroscopy as well as size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The copolymers featuring different architectures and distinct hydrophilic/hydrophobic contents were found to self‐assemble into thermo‐responsive gels in aqueous solution. Rheological studies indicated that the linear one‐arm PHB‐based copolymer tend to form a micellar solution, whereas the two‐ and four‐arm PHB‐based copolymers afforded gels with enhanced mechanical properties and solid‐like behavior. These investigations are the first to correlate the gelation properties to the arm number of a PHB‐based copolymer. All copolymers revealed a double thermo‐responsive behavior due to the NIPAAM and PPGMA blocks, thus allowing first the copolymer self‐assembly at room temperature, and then the delivery of a drug at body temperature (37 °C). The non‐significant toxic response of the gels, as assessed by the cell viability of the CCD‐112CoN human fibroblast cell line with different concentrations of the triblock copolymers ranging from 0.03 to 1 mg mL^?1, suggest that these PHB‐based thermo‐responsive gels are promising candidate biomaterials for drug‐delivery applications.     

Encapsulation of nanomaterials using an intermediary layer cross‐linkable ABC triblock copolymer

For the preparation of core‐shell nanoparticles containing functional nanomaterials, a photo‐cross‐linkable amphiphilic ABC triblock copolymer, poly(ethylene glycol)‐b‐poly(2‐cinnamoyloxyethyl methacrylate)‐b‐poly(methyl methacrylate) (PEG‐PCEMA‐PMMA), was synthesized. This triblock copolymer was then used to encapsulate Au nanoparticles or pyrene. The triblock copolymer of PEG‐b‐poly(2‐hydroxyethyl methacrylate)‐b‐PMMA (PEG‐PHEMA‐PMMA) (M_n = 15,800 g/mol, M_w/M_n = 1.58) was first synthesized by activators generated by electron transfer atom transfer radical polymerization. Its middle block was then functionalized with cinnamoyl chloride. The degrees of polymerization of the PEG, PHEMA, and PMMA blocks were 45, 13, and 98, respectively. PMMA‐tethered Au nanoparticles (with an average diameter of 3.0 nm) or pyrene was successfully encapsulated within the PEG‐PCEMA‐PMMA micelles. The intermediary layers of the micelles were then cross‐linked by UV irradiation. The spherical structures of the PEG‐PCEMA‐PMMA micelles containing Au nanoparticles or pyrene were not changed by the photo‐cross‐linking process and they showed excellent colloidal stability. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4963–4970, 2009     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Antibacterial poly(ethylene glycol) hydrogels from combined epoxy‐amine and thiol‐ene click reaction

Antibacterial hydrogels containing quaternary ammonium (QA) groups were prepared via a facile thiol‐ene “click” reaction using multifunctional poly(ethylene glycol) (PEG). The multifunctional PEG polymers were prepared by an epoxy‐amine ring opening reaction. The chemical and physical properties of the hydrogels could be tuned with different crosslinking structures and crosslinking densities. The antibacterial hydrogel structures prepared from PEG Pendant QA were less well‐defined than those from PEG Chain‐End QA. Furthermore, functionalization of the PEG‐type hydrogels with QA groups produced strong antibacterial abilities against Staphylococcus aureus, and therefore has the potential to be used as an anti‐infective material for biomedical devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 656–667     

A pH‐sensitive,strong double‐network hydrogel: Poly(ethylene glycol) methyl ether methacrylates–poly(acrylic acid)

We here describe new double network (DN) hydrogels with excellent mechanical strength and high sensitivity to pH changes. The first polymer network has a bottle brush structure and is formed from oligo‐monomers of poly(ethylene glycol) methyl ether methacrylate (PEGMA). Poly(acrylic acid) (PAA) is used as the second network. This double network features strong intermolecular interactions between the neutral poly(ethylene glycol) (PEG) side chains of PPEGMA and the non‐ionized carboxylic acid groups of the PAA second network. When immersed in solutions with a pH below ～4 the DN hydrogels have a low swelling ratio and are opaque as a result of solvent‐polymer phase separation driven by the formation of dense hydrogen‐bonded clusters. The compression strength (～8 MPa) is at least 14 times higher than the analogous single networks. When immersed in solutions with a pH >4, the hydrogels are transparent and exhibit a high swelling ratio with a compression strength of ～1 MPa. The PEG side chain length can be readily controlled without greatly altering the overall DN topology by choosing PEGMA monomers having different PEG side chain lengths. Longer PEG side branches give higher compression and tensile strengths at pH <4 when hydrogen bonded clusters form. The robust nature of these DN gels over a wide pH range may be useful for applications such as artificial muscles and controlled release devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of water‐dispersible,superparamagnetic single‐wall carbon nanotubes decorated with iron oxide nanoparticles and well‐defined chelating diblock copolymers

A novel approach for the fabrication of magneto‐active carbon nanotubes (CNTs) stabilized in aqueous media, involving the combination of carboxylated single‐wall carbon nanotubes (SWCNTs) with a new class of methacrylate‐based chelating diblock copolymers, is described. More precisely, a well‐defined diblock copolymer consisting of hexa(ethylene glycol) methyl ether methacrylate (hydrophilic and thermo‐responsive) and 2‐(acetoacetoxy)ethyl methacrylate (hydrophobic and metal‐chelating) synthesized by reversible addition‐fragmentation chain transfer polymerization has been used to prepare polymer‐coated magneto‐active SWCNTs decorated with iron oxide nanoparticles. Further to the characterization of the compositional and thermal properties using transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction spectroscopy and thermal gravimetric analysis, assessment of the magnetic characteristics by vibrational sample magnetometry disclosed superparamagnetic behavior at room temperature. The latter, combined with the thermo‐responsive properties of the polymeric coating and the unique, inherent properties of the carbon nanotubes may allow for their future exploitation in the biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1389–1396, 2011     

Side‐chain crystallization behavior of graft copolymers consisting of an amorphous main chain and crystalline side chains. II. Poly(n‐hexyl methacrylate)‐graft‐poly(ethylene glycol)

The phase behavior and crystallization of graft copolymers consisting of poly(n‐hexyl methacrylate) (PHMA) as an amorphous main chain and poly(ethylene glycol) (PEG) as crystallizable side chains (HMAx with 15 ≤ x ≤ 73, where x represents the weight percentage of PEG) were investigated. Small‐angle X‐ray scattering profiles measured above the melting temperature of PEG suggested that a microdomain structure with segregated PHMA and PEG domains was formed in HMA40 and HMA46. This phase behavior was qualitatively described by a calculated phase diagram based on the mean‐field theory. Because of the segregation of PEG into microdomains, the crystallization temperature of the PEG side chains in HMAx was higher than that in poly(methyl acrylate)‐graft‐poly(ethylene glycol) having a similar value of x, which was considered to be in a disordered state above the melting temperature. In HMAx with x ≤ 40, PEG crystallization was strongly restricted, probably because the PEG microdomains were isolated in the PHMA matrix. As a result, the growth of PEG spherulite was not observed because the PEG crystallization occurred after vitrification of the PHMA segregated domains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 129–137, 2007     

Micelles and reverse micelles with a photo and thermo double‐responsive block copolymer

A novel photo and thermo double‐responsive block copolymer was developed to fabricate micelles and reverse micelles in aqueous solution. The block copolymer was synthesized by ATRP block copolymerization of a spiropyran‐ containing methacrylate (SPMA) with di(ethylene glycol) methyl ether methacrylate (DEGMMA). By facile control of the photo irradiation and solution temperature, PSPMA‐core and PDEGMMA‐core micelles can be obtained, respectively. The thermo‐ and photo‐responsive micelles were used as smart polymeric nanocarriers for controlled encapsulation, triggered release, and re‐encapsulation of model drug coumarin 102. The double‐responsive self‐assembly and disassembly were tracked by dynamic light scattering, transmission electron microscopy, and fluorescence spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2855–2861, 2010     

Injectable supramolecular hybrid hydrogels formed by MWNT‐grafted‐poly(ethylene glycol) and α‐cyclodextrin

Poly(ethylene glycol)‐grafted‐multiwalled carbon nanotube (MWNT‐g‐PEG) was synthesized by a coupling reaction and formed inclusion complexes (ICs) after selective threading of the PEG segment of the MWNT‐g‐PEG through the cavities of α‐cyclodextrins (α‐CDs) units. The polypseudorotaxane structures of the as‐obtained hydrogels were confirmed by ¹H NMR, X‐ray diffraction and DSC analyses. The complexation of the PEG segments with α‐CDs and the hydrophobic interaction between the MWNT resulted in the formation of supramolecular hybrid hydrogels with a strong network. Thermal analysis showed that the thermal stability of the hydrogel was substantially improved by up to 100 °C higher than that of native hydrogel. The resultant hybrid hydrogels were found to be thixotropic and reversible, and could be applied as a promising injectable drug delivery system. The mechanical strength of the hybrid hydrogels was greatly improved in comparison with that of the corresponding native hydrogels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3145–3151, 2010     

pH and reduction dual‐stimuli‐responsive PEGDA/PAMAM injectable network hydrogels via aza‐michael addition for anticancer drug delivery

A pH and reduction dual‐stimuli‐responsive PEGDA/PAMAM injectable network hydrogel containing “acetals” as pH‐sensitive groups and “disulfides” as reducible linkages was designed and synthesized via aza‐Michael addition reaction between PAMAM and PEGDA diacrylates. The pore size and swelling ratio of hydrogels was varied from 14 ± 3 to 19 ± 4 μm and 214 ± 13 to 300 ± 19 μm, respectively, with varying ethylene glycol repeating units in diacrylates. The swelling ratio of PEGDA/PAMAM network hydrogel increased with increase in the molecular weight of PEG and with decrease in pH. The presence of different cationizable amino‐functionalities in PEGDA/PAMAM network hydrogel helped to enhance the swelling ability of hydrogel under the acidic conditions. The continuous increase in metabolically active live HeLa cells with time in MTT assay implied biocompatibility/noncytotoxicity of the synthesized PEGDA/PAMAM injectable network hydrogel. Furthermore, the prepared PEGDA/PAMAM hydrogel showed higher degradation at lower pH and at higher concentration of DTT. The burst release of doxorubicin from PEGDA/PAMAM hydrogel under the environment of the lower pH and in presence of DTT compared to the release at normal physiological pH and in absence of DTT suggested the potential ability of this model hydrogel system for targeted and selective anticancer drug release at tumor tissues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2080–2095     

Preparation of a novel pH-responsive silver nanoparticle/poly(HEMA-PEGMA-MAA) composite hydrogel

In this paper, series of novel pH-responsive silver (Ag) nanoparticle/poly(2-hydroxyethyl methacrylate (HEMA)-poly(ethylene glycol) methyl ether methacrylate (PEGMA)-methacrylic acid (MAA)) composite hydrogel were successfully prepared by in situ reducing Ag⁺ ions anchored in the hydrogel by the deprotonized carboxyl acid groups. X-ray diffraction (XRD), UV-vis spectrophotometry, transmission electron microscopy (TEM) and electric conductivity tests were used to characterize the composite system. It was found that the size and morphology of the reduced Ag nanoparticles in the composite hydrogels could be changed by loading the Ag⁺ ions at various swelling ratios of hydrogel. Moreover, compared to the pure poly(HEMA-PEGMA-MAA) hydrogel, not only did the Ag nanoparticle/poly(HEMA-PEGMA-MAA) composite hydrogels exhibit much higher swelling ratio and faster deswelling rate, but also higher pH switchable electrical properties upon controlling the interparticle distance under pH stimulus. The pH responsive nanocomposite hydrogel reported here might be a potentially smart material in the range of applications including electronics, biosensors and drug-delivery devices.     

Tuning the low critical solution temperature of polymer brushes grafted on single‐walled carbon nanotubes and temperature dependent loading and release properties

A nondestructive method was developed for grafting and retrieving polymer brushes from single‐walled carbon nanotubes (SWCNT)s based on mussel‐inspired chemistry. Thermo‐responsive polymer brushes were grafted on SWCNTs by coating the tubes with polydopamine as a reactive underlayer and sequential surface‐initiated atom transfer radical polymerization of oligo(ethylene glycol) methacrylate (OEGMA, M_n = 475) and 2‐(2'‐methoxyethoxy)ethyl methacrylate (MEO2MA). Copolymer brushes were retrieved from the SWCNTs using 1 M NaOH to destroy the crosslinked polydopamine coating, and after that, the pristine properties of the SWCNTs were preserved. The low critical solution temperature (LCST) and molecular weight of the copolymer were measured using a nephelometer and gel permeation chromatograph, respectively. The loading and release behavior of Rhodamine 6G on responsive polymer‐grafted SWCNTs demonstrates that the copolymer brushes confer the SWCNTs an LCST dependence. This method can accurately confirm the molecular weights and polydispersity of stimuli‐responsive polymers grafted on any other nanoparticles and predict their controlled release behavior. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1807–1814     

Preparation of Cross‐Linked Micelles from Glycidyl Methacrylate Based Block Copolymers and Their Usages as Nanoreactors in the Preparation of Gold Nanoparticles

This study reports the synthesis of poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate) (MPEG‐b‐PGMA) diblock, and poly(ethylene glycol)methyl ether‐block‐poly(glycidyl methacrylate)‐block‐poly(methyl methacrylate) (MPEG‐b‐PGMA‐b‐PMMA) triblock copolymers via atom transfer radical polymerization and their self‐assembly behaviors in aqueous media by using acetone as cosolvent. These block copolymers formed near monodisperse core–shell micelles having cross‐linkable cores. Two types of cross‐linked micelles, namely spherical MPEG‐b‐PGMA core cross‐linked (CCL) micelles and MPEG‐b‐PGMA‐b‐PMMA interlayer cross‐linked (ILCL) micelles, were also successfully prepared from these block copolymers by using various bifunctional cross‐linkers such as hexamethylenediamine (HMDA), ethylenediamine (EDA), and 2‐aminoethanethiol (AET). Cross‐linking was successfully carried out via ring‐opening reactions of epoxy residues of hydrophobic‐cores with primary amine or thiol groups of bifunctional cross‐linkers. Finally, these cross‐linked micelles were successfully used as nanoreactors in the synthesis of gold nanoparticles (AuNPs) in aqueous media. Both CCL and ILCL micelles were found to be good stabilizers for AuNPs in aqueous media. Both CCL‐ and ILCL‐stabilized AuNP dispersions were stable for a long time without any size changes and flocculation at room temperature. These cross‐linked stabilized AuNPs exhibited good catalytic activities in the reduction of p‐nitrophenol. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 514–526.     

High water‐content thermoresponsive hydrogels via electrostatic macrocrosslinking of cellulose nanofibrils

Atom transfer radical polymerization (ATRP) has been utilized to synthesize tri‐ and star‐block copolymers of poly(di(ethylene glycol)methyl ether methacrylate) (PDEGMA) and quaternized poly(2‐(dimethylamino)ethyl methacrylate) (qPDMAEMA). The block copolymers, all with a minimum of two cationically charged blocks, were sequentially used for electrostatic macrocrosslinking of a dilute dispersion of anionic TEMPO‐oxidized cellulose nanofibrils (CNF, 0.3 wt%), forming free‐standing hydrogels. The cationic block copolymers adsorbed irreversibly to the CNF, enabling the formation of ionically crosslinked hydrogels, with a storage modulus of up to 2.9 kPa. The ability of the block copolymers to adsorb to CNF was confirmed by quartz crystal microbalance with dissipation monitoring (QCM‐D) and infrared spectroscopy (FT‐IR), and the thermoresponsive properties of the hydrogels were investigated by rheological stress and frequency sweep, and gravimetric measurements. This method was shown to be promising for the facile production of thermoresponsive hydrogels based on CNF. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3415–3424