This work investigates the photoinduced energy transfer from poly(N‐vinylcarbazole) (PVK), as a donor material, to fac‐(2,2′‐bipyridyl)Re(CO)3Cl, as a catalyst acceptor, for its potential application towards CO2 reduction. Photoluminescence quenching experiments reveal dynamic quenching through resonance energy transfer in solid donor/acceptor mixtures and in solid/liquid systems. The bimolecular reaction rate constant at solution–film interfaces for the elementary reaction of the excited state with the quencher material could be determined as 8.8(±1.4)×1011 L mol?1 s?1 by using Stern–Volmer analysis. This work shows that PVK is an effective and cheap absorber material that can act efficiently as a redox photosensitizer in combination with fac‐(2,2′‐bipyridyl)Re(CO)3Cl as a catalyst acceptor, which might lead to possible applications in photocatalytic CO2 reduction. 相似文献
Poly(N‐ispropylacrylamide) [PNIPAM] is a widely studied polymer for use in biological applications due to its lower critical solution temperature (LCST) being so close to the human body temperature. Unfortunately, attempts to combine carbon nanotubes (CNTs) with PNIPAM have been unsuccessful due to poor interactions between these two materials. In this work, a PNIPAM copolymer with 1 mol‐% pyrene side group [p‐PNIPAM] was used to produce a thermoresponsive polymer capable of stabilizing both single and multi‐walled carbon nanotubes (MWNTs) in water. The presence of pyrene in the polymer chain lowers the LCST less than 4 °C and the interaction with nanotubes does not show any influence on LCST. Moreover, p‐PNIPAM stabilized nanotubes show a temperature‐dependent dispersion in water that allows the level of nanotube exfoliation/bundling to be controlled. Cryo‐TEM images, turbidity, and viscosity of these suspensions were used to characterize these thermoresponsive changes. This ability to manipulate the dispersion state of CNTs in water with p‐PNIPAM will likely benefit many biological applications, such as drug delivery, optical sensors, and hydrogels.
This communication describes the morphology and DC conductivity of poly(N‐vinylcarbazole) (PNVC)/multi‐walled carbon nanotubes (MWCNTs) nanocomposite. The nanocomposite has been synthesized by solid state in situ polymerization of N‐vinylcarbazole (NVC) monomer in the presence of MWCNTs at an elevated temperature. Fourier transform infrared (FT‐IR) spectroscopy studies reveal the ability of MWCNTs to promote the in situ polymerization of the NVC monomer. Field‐emission scanning electron microscopy (FE‐SEM) observations show the homogeneous wrapping of MWCNTs' outer surface by PNVC polymer. Transmission electron microscopy (TEM) images and Raman spectroscopy results support the SEM observations. Thermogravimetric analyses reveal a significant improvement of thermal stability of the nanocomposite sample in the higher temperature region. The resulting nanocomposite material exhibits a dramatic improvement of the DC conductivity inherent to the PNVC. For example, the DC conductivity increases from ≈5.9 × 10−13 S · cm−1 for PNVC to ≈12 S · cm−1 for the nanocomposite, an increase of about 1013 in the electrical conductivity.
A hybrid inorganic–polymer nanocomposite using CdSe nanocrystals with high electron mobility has been successfully synthesized by atom transfer radical polymerization (ATRP). First the hydroxyl‐coated CdSe nanoparticles (i.e., CdSe–OH) were prepared via a wet chemical route. A polymerization initiator was then prepared for ATRP of N‐vinylcarbazole. FT‐IR, 1H NMR, and XRD analyses confirmed the successful synthesis of CdSe–poly(N‐vinylcarbazole) (PVK) nanohybrid. UV–Vis spectra and photoluminescence data revealed that grafting of PVK onto the surface of CdSe nanocrystals would reduce the band gap of PVK and cause the red shift of emission peak. TEM and SEM micrographs exhibited CdSe nanoparticles that were well‐coated with PVK polymer.
A rod‐coil block copolymer consisting of poly(3‐hexylthiophene) (P3HT) and poly(N‐vinylcarbazole) (PVK) ( P3HT‐ b ‐PVK ) in a single molecular architecture is prepared as the first example for WOLEDs. By obtaining the phase separated domains in thin film of the resulting block copolymer, it is possible to suppress energy transfer from PVK as wide bandgap units to P3HT as low bandgap blocks, yielding dual emissions for white electroluminescence with CIE coordination of (0.34, 0.33).
The synthesis of poly(N‐vinylcarbazole)‐based block copolymers functionalized with rhenium diimine complexes or pendant terpyridine ligands is reported. The copolymers are synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization, and they exhibit interesting morphological properties as a result of the phase separation between different blocks. The rhenium complex polymer block may function as a photosensitizer, while the terpyridine‐containing polymer block can be used as the template for nanofabrication by selective deposition of zinc complexes.
Poly(N‐vinylpyrrolidone) (PVP), an important water soluble synthetic polymer, has many desirable properties including low toxicity, chemical stability, and good biocompatibility. Since PVP is hemocompatible and physiologically inactive, it has been used as a blood plasma substitute. Surface modification with PVP has been investigated extensively over the past few years as a means of preventing nonspecific protein adsorption. PVP may therefore be seen as a promising antifouling surface modifier comparable to poly(ethylene glycol) (PEG). In this review, various approaches for the design and preparation of PVP‐modified surfaces are summarized and potential biomedical applications of these PVP‐modified materials are indicated. Finally, some perspectives on future research on PVP for surface modification are discussed.
The metal‐free polymerization of propylene oxide (PO) using a special class of alkene—N‐heterocyclic olefins (NHOs)—as catalysts is described. Manipulation of the chemical structure of the NHO organocatalyst allows for the preparation of the poly(propylene oxide) in high yields with high turnover (TON>2000), which renders this the most active metal‐free system for the polymerization of PO reported to date. The resulting polyether displays predictable end groups, molar mass, and a low dispersity (?M<1.09). NHOs with an unsaturated backbone are essential for polymerization to occur, while substitution at the exocyclic carbon atom has an impact on the reaction pathway and ensures the suppression of side reactions. 相似文献
Well‐defined poly(ethylene oxide)s (PEOs) bearing reactive sites regularly distributed along the chain have been synthesized by the polycondensation of PEO containing a central tertiary amino group with dichloromethane, followed by quaternization with suitable reagents to obtain polyzwitterionic or cationic PEOs with alkyl, allyl, or fluorocarbon pendant groups. The pendant allyl groups have been converted into primary amino groups by reaction with 2‐aminoethanethiol hydrochloride to obtain polyamino‐functionalized PEO.
Polyfunctional PEOs bearing different pendant groups. 相似文献
In this communication, the synthesis, characterization, and properties of highly conductive core–shell nanocomposites of poly(N‐vinylcarbazole) (PNVC)–polypyrrole (PPY) copolymers with multi‐walled carbon nanotubes (MWCNTs) are described. A unique free‐radical coupling reaction between PNVC and PPY cation radicals in chloroform solvent, using feric chloride as an oxidant, in the presence of suspended MWCNTs in the reaction medium, was used for the synthesis of nanocomposite. Field‐emission scanning and transmission electron microscopy studies showed the formation of the core–shell nanocomposite. Raman spectrocopy results as well as thermogravimetric analysis supported the electron microscopic observations. The resulting PNVC–PPY copolymer‐coated MWCNTs showed an unprecedentedly increased value of direct electrical conductivity (bulk) compared to the conductivity of all samples even with pure MWCNTs.