Synthesis of high‐refractive index polyimide containing selenophene unit

A highly refractive and transparent aromatic polyimide (PI) containing a selenophene unit has been developed. The PI was prepared by a two‐step polycondensation procedure from 2,5‐bis(4‐aminophenylenesulfanyl)selenophene (APSP) and 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride (3SDEA), and shows high thermal stabilities, such as a relatively high‐glass transition temperature of 189 °C and 5% weight loss temperature (T_5%) of 418 °C. The optical transmittance of the PI film at 450 nm is higher than 50%. The selenophene unit provides the PI with a refractive index of 1.7594, which is higher than corresponding PIs containing a thiophene or a phenyl unit because of the high polarizability per unit volume of the selenium atom. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4428–4434, 2009     

Light induced gradient refractive index materials

Controlled and patterned variation of refractive index (wavefront) across a lens surface was obtained via the use of “phase mask”. Gradient interpenetrating network was selected to screen the acrylate and epoxy monomer to obtain necessary refractive index change over the lens surface. The best photoinitiator system was determined to give a stable and transparent wavefront as a mixture of 2 wt% Irgacure 250 (I 250), 1 wt% Isopropylthoxanthone (ITX) and 0.5 wt Irgacure 184 (I 184). It is found that a dipropylene glycol diacrylate (SR 508) and a triethylene glycol dimethacrylate (TGDM) improved the stability of the transparent wavefront because of higher Tg of the network. Haze problem, a consequence of diffusion of one monomer to other network because of the rate differences, was eliminated with IPN composed of TGDM (an acrylate with slow polymerization rate) and bis (3,4‐epoxy cyclohexylmethyl)adipate (BECMA, an epoxy with fast polymerization rate). A high refractive index additive, bromonaphthalene, resulted the best wavefront with lens power when incorporated into BECMA and TGDM IPN. Copyright © 2015 John Wiley & Sons, Ltd.     

9,9′‐spirobifluorene‐containing polycarbonates: Transparent polymers with high refractive index and low birefringence

Syntheses of 2,2′‐bisalcoholic group‐substituted 9,9′‐spirobifluorene monomers 2 were performed by the reaction of 2,2′‐dihydroxy‐9,9′‐spirobifluorene 2a with haloalcohols. Polycarbonates consisting of 9,9′‐spirobifluorene skeleton in the main chain (PC 4 ) were synthesized by the polycondensation of 2,2′‐bisalcoholic monomers 2 and triphosgene or diphenyl carbonate. PC 4 showed good thermal stability: the 5% weight loss temperature was over 330 °C under both nitrogen and air atmospheres. The glass transition temperature was in a range of 16–269 °C estimated by differential scanning calorimetry, depending on the flexibility of the alkylene or oxyethylene chains of 2 . PC 4 showed high solubility toward ordinary organic solvents such as CHCl₃, benzene, and THF, making possible the preparation of the flexible thin films. Very high refractive index in a range of 1.62–1.66 at 589 nm was observed although PC 4 consists only of C, H, and O atoms, whereas very low degree of birefringence was confirmed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3658–3667, 2010     

High-refractive index acrylate polymers for applications in nanoimprint lithography

The development of polymeric optical materials with a higher refractive index,transparency in the visible spectrum region and easier processability is increasingly desirable for advanced optical applications such as microlenses,image sensors,and organic light-emitting diodes.Most acrylates have a low refractive index(around 1.50)which does not meet the high perfo rmance requirements of advanced optical materials.In this research,three novel acrylates were synthesized via a facile one-step approach and used to fabricate optical transparent polymers.All of the polymers reveal good optical properties including high transparency(≥90%)in the visible spectrum region and high refractive index values(1.6363)at 550 nm.Moreover,nanostructures of these acrylate polymers with various feature sizes including nanogratings and photonic crystals were successfully fabricated using nanoimprint lithography.These results indicate that these acrylates can be used in a wide range of optical and optoelectronic devices where nanopatterned films with high refractive index and transparency are required.     

Viscosity and refractive index adjustment of poly(methyl methacrylate‐co‐ethyleneglycol dimethacrylate) for application in microoptics

Polymer optical components like waveguides or lenses are gaining more and importance as passive or active devices enabling the formation of a sensor and detector platform, e.g. for monitoring the health of large area functional surfaces, which are difficult to access like the wings of an off‐shore wind energy plant. With respect to low‐loss waveguiding and the use of chemical and mechanical stable polymers there is a need to tailor the optical as well as the thermomechanical properties. The given approach describes the addition of electron‐rich small organic molecules like phenanthrene to a poly(methyl methacrylate)‐based polymer matrix enabling a significant refractive index increase from 1.49 up to almost 1.55 (@589 nm). As undesirable side effects the optical transmittance in the visible range at higher guest molecule content is reduced, and a pronounced plasticizing occurs. Both hamper the application of the mixture, e.g. as optical waveguide material. The plasticizing and the accompanied drop of the glass transition temperature, determining the maximum operation temperature, can be partially compensated by the copolymerization of the methyl methacrylate monomer (MMA) with the difunctional monomer ethyleneglycol dimethacrylate (EGDMA) at certain crosslinker content. The resulting new developed guest–host mixtures enable the realization of optical devices with adjusted rheological behavior prior to curing and tailored optical properties after polymerization. Copyright © 2015 John Wiley & Sons, Ltd.     

Light induced refractive index changes in PMMA films doped with styrene

Solutions of poly(methyl methacrylate) in styrene are used to produce thin polymer films (1m–20m) saturated with styrene monomer. In the illuminated areas refractive index changes up to 10^–2 are achieved by photoinduced polymerisation. The index patterns may be fixed by annealing treatments removing the residual monomer.We thank P. Hertel, M. Kopietz, M. D. Lechner and D. Steinmeier for valuable discussions. Financial support of the Stiftung Volkswagenwerk is gratefully acknowledged.     

High refractive index adamantane‐based silicone resins for the encapsulation of light‐emitting diodes

The encapsulation of high power light emitting diode (LED) needs the silicone resins to have relative high refractive index and thermal‐aging properties. Herein, high refractive index adamantane‐based phenyl epoxy‐silicone (APES) resins for LED encapsulation were synthesized by the sol‐gel condensation of 1‐adamantane methanol propyltrimethoxysilane‐3‐urethane, γ‐(2,3‐epoxypropoxy)propytrimethoxysilane and diphenylsilanediol. These adamantane‐based silicone resins have multifunctional groups including adamantyl group, phenyl group, and epoxy group in order to meet the various requirements for LED encapsulation. Importantly, the adamantane group in the silicone resins benefits for high refractive index and anti‐thermal properties. These APES resins were characterized by proton nuclear magnetic resonance and Fourier transform infrared spectroscopy. When APES resins were cured by methylhexahydrophthalic anhydride, they showed relatively high refractive index of 1.56, high hardness, and high thermal resistance. The encapsulated LED demonstrated high adhesion properties by red‐ink tests. These merits make adamantane‐based silicone resins promising candidates as LED encapsulation materials.     

Refractive index increase of acrylate‐based polymers by adding soluble aromatic guest‐molecules

This work presents the influence of dopants on viscosity in an uncured liquid state as well as on refractive index, Abbe number, optical loss, and glass transition temperature of different polymer compositions. The base material consists of Genomer 2263, a bisphenol, an epoxy diacrylate as matrix polymer, and benzyl methacrylate as comonomer. As dopants, the soluble aromatic guest‐molecules 9‐bromophenantrene and 9‐vinylcarbazole are investigated. The viscosity can be adjusted by different mixtures of the matrix polymer and comonomer from 3000 down to 4 mPa sec. Depending on the type and content of the dopants, the refractive index, Abbe number, and the glass transition temperature can be adjusted. The refractive indices increase linear at 589 nm and 20°C from 1.572 to 1.638 by doping, with Abbe numbers between 20 and 30. At this wavelength, the optical losses were determined to be around 2 dB · cm^?1. The glass transition temperature can be tailored between 50 and 98°C. A way to use high amounts of optical dopants is presented, which opens up the way for different shaping technologies like inkjet printing of optical components. Copyright © 2016 John Wiley & Sons, Ltd.     

Cyclic allylic sulfide based photopolymer for holographic recording showing high refractive index modulation

The development and characterization of a new holographic photopolymer system showing high refractive index modulation (∆n) is presented. It exploits the ring-opening polymerization reaction of a cyclic allylic sulfide (CAS) monomer, which is dispersed in a cellulose acetate butyrate (CAB) polymer matrix together with a blue sensitive radical photoinitiator. Volume Phase Holographic Gratings (VPHGs) obtained using these films show a very good fidelity of the transferred pattern, without deviations from the theoretical curves. A high ∆n is obtained due to the addition to this system of a tetrafunctional thiol crosslinker, which maximizes the material potential (formula limit) of the formulation. It also allows for a thermal post process of the gratings, further enhancing the ∆n. The photopolymer properties are evaluated as function of the monomer and thiol concentration to determine the optimal composition, at which a ∆n greater than 0.03 is obtained. This is a considerably high value in the field of photopolymers for holography and it enables the manufacturing of efficient holograms.     

High refractive index materials: A structural property comparison of sulfide‐ and sulfoxide‐containing polyamides

High‐refractive‐index polyamides (PAs) are developed by incorporation of sulfide‐ or sulfoxide linkages and chlorine substituents. The PAs are synthesized through the polycondensation of two novel diamine monomers, 2,2′‐sulfide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3a) and 2,2′‐sulfoxide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3b), with various aromatic diacids (a–e). The ortho‐sulfide or sulfoxide units, pendant chlorine groups, and flexible ether linkages in the diamine monomers endowed the obtained PAs with excellent solubilities in organic solvents. The resulting PAs showed high thermal stability, with 10% weight loss temperatures exceeding 415 °C under nitrogen and 399 °C in air atmosphere. The combination of chlorine substituents, sulfide or sulfoxide linkages, and ortho‐catenated structures provided polymers with high transparency along with high refractive index values of up to 1.7401 at 632.8 nm and low birefringences (<0.0075). The structure–property relationships of the analogous PAs containing sulfide or sulfoxide linkages were also studied in detail by comparing the results. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2867–2877     

Synthesis of polymeric 1‐iminopyridinium ylides as photoreactive polymers

Two synthetic routes to polymeric 1‐imino pyridinium ylides as new photoreactive polymeric architectures were investigated. In the first approach, polymerization of newly synthesized 1‐imino pyridinium ylide containing monomers yielding their polymeric analogues was achieved by free radical polymerization. Alternatively, reactive precursor polymers were synthesized and converted into the respective 1‐imino pyridinium ylide polymers by polymer analogous reactions on reactive precursor polymers. Quantitative conversion of the reactive groups was achieved with pentafluorophenyl ester containing polymers and newly synthesized photoreactive amines as well as by the reaction of poly(4‐vinylbenzoyl azide) with a photoreactive alcohol. The polymers obtained by both routes were examined regarding their photoreaction products and kinetics in solution as well as in thin polymer films. Contact angle measurements of water on the polymer films before and after irradiation showed dramatic changes in the hydrophilicity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 832–844, 2010     

Flexible nanocrystalline‐titania/polyimide hybrids with high refractive index and excellent thermal dimensional stability

In this study, a novel synthetic route was developed to prepare polyimide–nanocrystalline–titania hybrid optical films with a relatively high titania content (up to 50 wt %) and thickness (20–30 μm) from soluble polyimides containing hydroxyl groups. Two series of newly soluble polyimides were synthesized from the hydroxy‐substituted diamines with various commercial tetracarboxylic dianhydrides. The hydroxyl groups on the backbone of the polyimides could provide the organic–inorganic bonding and resulted in homogeneous hybrid solutions by controlling the mole ratio of titanium butoxide/hydroxyl group. AFM, SEM, TEM, and XRD results indicated the formation of well‐dispersed nanocrystalline‐titania. The flexible hybrid films could be successfully obtained and revealed relatively good surface planarity, thermal dimensional stability, tunable refractive index, and high optical transparency. A three‐layer antireflection coating based on the hybrid films was prepared and showed a reflectance of less than 0.5% in the visible range indicated its potential optical applications. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1433–1440, 2010     

Synthesis of dual‐functional copolymer with orthogonally photosensitive groups

A dual‐functional copolymer, poly(4‐styrenesulfonyl azide‐co‐t‐butyl‐methacrylate), with built‐in photoacid labile and photocrosslinkable components was designed and synthesized by radical copolymerization. The mixture of copolymer and photoacid generators was spin coated on aminosilane treated Si wafers and polycarbonate (PC). When exposed to 365 nm UV light, photoacids were generated, which decomposed the acid labile groups, t‐butyl‐ester, to carboxylic acid in the exposed region, leading to drastic change of wettability from hydrophobic to hydrophilic after developing the film in an aqueous base solution. The patterned polymer film could be subsequently photoimmobilized on the substrate under 254 nm deep UV exposure through C? H insertion via exited azide groups. ¹H‐NMR and Fourier transform infrared spectra confirmed the synthesis of the copolymer, and the photodecomposition and photografting reactions occurred orthogonally at 365 and 254 nm, respectively, without interfering each other. On the patterned surfaces, including a hexagonal dot array and a gradient line array, we demonstrated selective wetting in the 365 nm exposed regions. On the gradient line array, we showed an interesting ratchet wetting pattern. Finally, we showed that the copolymer could be used to modify the wettability of PC while maintaining its high optical quality. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Alternating copolymerization of bis(hexafluoroisopropyl) fumarate with styrene and vinyl pentafluorobenzoate: Transparent and low refractive index polymers

Bis(hexafluoroisopropyl) fumarate (BHFIPF) did not homopolymerize with free radical initiators. However, BHFIPF yielded alternating copolymers with styrene in bulk with Azobisisobutyronitrile (AIBN) as a radical initiator. The monomer reactivity ratios of BHFIPF (M₁) and styrene (M₂) were calculated as r₁ = 0.00 and r₂ = 0.02. BHFIPF also copolymerized with vinyl pentafluorobenzoate (VPFB) in bulk and in pentafluoroisopropanol solution to produce an alternating copolymer. The reactivity ratios of BHFIPF (M₁) with VPFB (M₂) were r₁ = 0.00 and r₂ = 0.05 in bulk and r₁ = 0.01 and r₂ = 0.11 in pentafluoroisopropanol, respectively. The glass transition temperatures (T_g) of the BHFIPF‐styrene and BHFIPF‐VPFB copolymers were 107 and 86 °C, respectively. The BHFIPF‐styrene copolymer was thermally stable, and the thermal degradation temperature (T_d) was 400 °C, whereas the T_d of BHFIPF‐VPFB copolymer was 240 °C. The films obtained by casting from tetrahydrofuran (THF) solutions of these copolymers were flexible and transparent. Their refractive indices were 1.4048 for the BHFIPF‐styrene copolymer, and 1.3980 for the BHFIPF‐VPFB copolymer at 633 nm, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Control of refractive index of sol-gel tungsten oxide films

Tungsten oxide films were prepared by a complexing agent-assisted sol-gel process. All the films were at 500°C were crystalline and transparent. The refractive index n and extinction coefficient k of the films were calculated from the transmittance and reflectance spectra in the visible and infrared regions. The values of n were lowered to depend on the organic ligands used in the preparation of the sols. The use of such ligands may be a mean to control the refractive index of coatings.     

Effect of dopant structure on refractive index and glass transition temperature of polymeric fiber‐optic materials

Graded‐index plastic optical fibers, composed of doped polymers, have advantages over conventional glass optical fibers, but need to be developed further for practical application. Here, a variety of aromatic sulfide dopants were synthesized, and their effects on the refractive indexes and glass transition temperatures (T_g) of poly(methyl methacrylate) and methyl 2‐chloroacrylate/2,2,2‐trichloroethyl methacrylate copolymers were studied. While polymers containing large dopants exhibited relatively high refractive indices, their T_g values were low, making these materials unsuitable for graded‐index plastic optical fiber applications. Six dopants yielded polymers that exhibited higher T_g values than the conventionally used (diphenyl sulfide)‐doped polymer. The dopant dibenzothiophene, in particular, yielded polymers with the highest refractive indexes and T_g values, and polymers containing (phenylthio)benzene dopants also performed well. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and nanoimprinting of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry

This work demonstrates the UV nanoimprinting lithography (UV-NIL) of high refractive index and highly transparent polythioethers based on thiol-ene click chemistry. Herein, 9,9-bis(3-mercaptopropylphenylether)fluorene (BMPF) is designed as a new thiol monomer with a high refractive index, high transparency, and good processability for UV-NIL. Colorless polythioethers are synthesized from BMPF and ene monomers under mild thiol-ene click reaction conditions. Excellent transmittance (96%) of 400 nm light is observed in all the polymer films and high refractive index values of 1.5972–1.6382 are attained. UV-NIL using thiol-ene photopolymerization affords polymer nanoimprinting patterns with various features on the order of 100–500 nm without any fractures. To the best of our knowledge, this is the first report on UV-NIL of high refractive index and highly transparent polymers. Through proper monomer and polymer design, novel polythioethers with suitable glass transition temperature (T _g) values are developed with high refractive index, high transparency, and good UV-NIL processability. Furthermore, UV-NIL based on thiol-ene click chemistry is accomplished at the nanoscale. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2175–2182     

The influence of photo initiators on refractive index and glass transition temperature of optically and rheologically adjusted acrylate based polymers

A material system with individually adjustable rheological and optical properties is presented. The optical transmission and refractive indices of the material were modified, and viscosities were investigated at different temperatures and shear rates. Furthermore, two UV‐sensitive photo initiators were analysed with respect to their effect on the polymerization behaviour of the material system. The refractive indices of the material system were adjusted between 1.513 < n_D,20 < 1.595, with optical transmittances of up to 90% within the UV‐VIS region (400 nm < λ < 800 nm). Two photo initiators, Diphenyl(2,4,6‐trimethylbenzoyl)phosphine oxide and Bis(2,4,6‐trimethylbenzoyl)phosphine oxide, were investigated, and viscosity was modified at 20 °C between 0.002 Pa · s < η < 87 Pa · s. The glass transition temperature of the polymerized samples was determined to be between 40 °C and 50 °C. Results showed that Diphenyl(2,4,6‐trimethylbenzoyl)phosphine oxide exhibited more effective polymerization compared to Bis(2,4,6‐trimethylbenzoyl)phosphine oxide. The addition of phenanthrene to the mixtures increased the refractive index with ?n = 0.02, whilst the viscosity was decreased by a small amount. Copyright © 2016 John Wiley & Sons, Ltd.