Preparation and characterization of polymer/silica nanocomposites via double in situ miniemulsion polymerization

Polymer/SiO₂ nanocomposite microspheres were prepared by double in situ miniemulsion polymerization in the presence of methyl methacrylate, butyl acrylate, γ‐methacryloxy(propyl) trimethoxysilane, and tetraethoxysilane (TEOS). By taking full advantage of phase separation between the growing polymer particles and TEOS, inorganic/polymer microspheres were fabricated successfully in a one‐step process with the formation of SiO₂ particles and the polymerization of organic monomers taking place simultaneously. The morphology of nanocomposite microspheres and the microstructure, mechanical properties, thermal properties, and optical properties of the nanocomposite films were characterized and discussed. The results showed that hybrid microspheres had a raspberry‐like structure with silica nanoparticles on the shells of polymer. The silica particles of about 20 nm were highly dispersed within the nanocomposite films without aggregations. The transmittance of nanocomposite film was comparable to that of the copolymer film at around 70–80% from 400 to 800 nm. The mechanical properties and the fire‐retardant behavior of the polymer matrix were improved by the incorporation of silica nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3128–3134, 2010     

Synthesis,characterization, and molecular recognition of sugar‐functionalized nanoparticles prepared by a combination of ROP,ATRP, and click chemistry

The aim of this work was to prepare nanoparticles bearing sugar residues at their surface through the synthesis of amphiphilic block copolymer of poly d,l‐lactide (PLA) and poly(ethylene glycol)methacrylate, with the hydrophilic part terminating with glucopyranoside molecules as a model for any carbohydrate ligand. The construction was achieved by a combination of click chemistry, ring‐opening polymerization, and atom transfer radical polymerization. The modified monomer and resulting copolymer were characterized by NMR, SEC, and FTIR. Nanoparticles with a mean hydrodynamic diameter of <200 nm as determined by quasi‐elastic light scattering were prepared from the amphiphilic copolymer by nanoprecipitation using dimethylformamide (DMF) as water‐miscible solvent. In the range of 2.5–10 mg copolymer/mL DMF, the polymer concentration did not have much effect on the size of the nanoparticles. Accessibility of glucopyranoside molecules on the surface of the nanoparticles was confirmed by formation of aggregates from nanoparticles in the presence of concanavalin A observed by transmission electronic microscopy. Finally, no significant cytotoxicity toward human umbilical vein endothelial cells was detected for the final nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3178–3187, 2010     

Preparation of poly(methyl methacrylate)–poly(acrylonitrile‐co‐butadiene) core–shell nanoparticles

Poly(methyl methacrylate)–poly(acrylonitrile‐co‐butadiene) (PMMA–NBR) core–shell structured nanoparticles were prepared using a two‐stage semibatch microemulsion polymerization system with PMMA and NBR as the core and shell, respectively. The Gemini surfactant 12‐3‐12 was used as the emulsifier and found to impose a pronounced influence on the formation of core–shell nanoparticles. The spherical morphology of core–shell nanoparticles was observed. It was found that there exists an optimal MMA addition amount, which can result in the minimized size of PMMA–NBR core–shell nanoparticles. The formation mechanism of the core–shell structure and the interaction between the core and shell domains was illustrated. The PMMA–NBR nanosize latex can be used as the substrate for the following direct latex hydrogenation catalyzed by Wilkinson's catalyst to prepare the PMMA–HNBR (hydrogenated NBR) core–shell nanoparticles. The hydrogenation rate is rapid. In the absence of any organic solvent, the PMMA–HNBR nanoparticles with a size of 30.6 nm were obtained within 3 h using 0.9 wt % Wilkinson's catalyst at 130 °C under 1000 psi of H₂. This study provides a new perspective in the chemical modification of NBR and shows promise in the realization of a “green” process for the commercial hydrogenation of unsaturated elastomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Encapsulation of silica nanoparticles by miniemulsion polymerization

Hybrid silica/polystyrene nanoparticles were synthesized by miniemulsion polymerization. With the objective to prepare core‐shell hybrid nanoparticles having narrow particle size distributions (PSDs) as well as a high degree of silica encapsulation, the effect of adding surface modifiers, the size of silica nanoparticles, the ratio styrene/silica, the surfactant concentration, and the presence of ethanol in the reaction mixture were studied. A synergistic effect was observed using oleic acid (OA) together with 3‐(trimethoxysilyl)propyl methacrylate (TPM) in the compatibilization step between the organic phase (monomer) and inorganic nanoparticles (silica). Mono and multinuclear eccentric core‐shell hybrid nanoparticles were obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 935–948, 2009     

Monodisperse ultrafine polystyrene nanoparticles prepared by a semicontinuous microemulsion polymerization

Monodisperse ultrafine polystyrene nanoparticles have been successfully prepared under low levels of surfactant through a novel semicontinuous microemulsion polymerization, in which the first part of monomer (St₁) is added dropwise while the subsequent supply to the polymerizing system is delivered in one potion. Polystyrene nanoparticles with number‐average diameter of 17.4 nm and polydispersity index of 1.06 were obtained using low level of surfactant/monomer weight ratio of 0.20. Influencing of parameters including amount of St₁, solid content, initiator, reaction temperature, and cosurfactant on the resultant particle size and size distribution were investigated. The mechanism of nucleation and particle growth was discussed as well. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4522–4528, 2008     

Monodispersed PEG‐b‐PSt nanoparticles prepared by atom transfer radical emulsion polymerization under microwave irradiation

Atom transfer radical emulsion polymerization of styrene using PEG‐Cl as macroinitiator under microwave irradiation was successfully conducted and monodispersed nanoparticles were prepared. The PEG‐Cl macroinitiator was synthesized, and confirmed by FTIR spectrum. The structure of the PEG‐b‐PSt diblock copolymer was characterized by ¹H‐NMR and the number of styrene unit in the diblock copolymer was calculated. The morphology, size, and size distribution of the nanoparticles were characterized by transmission electron microscope (TEM) and photon correlation spectroscopy (PCS). The effects of the ratio of macroinitiator and monomer, the ratio of catalyst and macroinitiator on the size and size distribution of nanoparticles were investigated. It was found that the diameters of PEG‐b‐PSt nanoparticles prepared under microwave irradiation were smaller (<50 nm) and more monodispersed than those prepared with conventional heating. Moreover, with the increasing of the ratio of St/PEG‐Cl, the hydrodynamic diameters (D_h) of the nanoparticles increased and the poly index decreased, both D_h and poly index of the nanoparticles prepared under microwave irradiation were smaller then those prepared with conventional heating; as the concentration of catalyst increased, the D_h of the nanoparticles decreased and the poly index of the nanoparticles increased. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 481–488, 2008     

Preparation of epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles

Epoxy‐functionalized polystyrene/silica core–shell composite nanoparticles were prepared by the postaddition of glycidyl methacrylate (GMA) via emulsion polymerization. The outermost shell of obtained multilayered core–shell particles was made up of poly(glycidyl methacrylate) (PGMA). A semicontinuous process involving the dropwise addition of GMA was used to avoid demulsification of the emulsion system. The amount of grafted PGMA was quantified by Fourier transform infrared spectroscopy and was altered in a wide range (1–50 wt % to styrene). The binding efficiency was usually high (ca. 90%), indicating strong adhesion between the silica core and the polymer shell. There were approximately four or five original silica beads, which formed a cluster, per composite of nanoparticles whose size was about 60–70 nm. Other main factors of polymerization conditions including the amounts of sodium dodecyl sulfonate and silica are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2253–2262, 2004     

Optically active composite nanoparticles with chemical bonds between core and shell

A facile methodology was developed to prepare a novel type of core/shell nanoparticles (NPs) with optical activity and with chemical bonds between the cores and shells. The cores were prepared via catalytic emulsion copolymerization of substituted acetylene comonomers in which one monomer contains azo groups in side chains. For preparing the core/shell NPs, the azo groups in the seed particles (i.e., cores) subsequently act as initiators for vinyl monomer to undergo free radical polymerizations, yielding the shells. This situation resulted in chemical bonds between cores and shells. Both the seed emulsion and core/shell nanoparticle emulsion exhibited optical activity, derived from the polyacetylenes adopting helical conformation of predominant handedness. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The improvement of electro‐optical properties of polymer‐dispersed liquid crystals using copolymer macroinitiator with different glass transition temperature

In this article, copolymer macroinitiators prepared with styrene and iso‐octyl acrylate by reversible additional‐fragmental chain transfer polymerization were used to prepare polymer‐dispersed liquid crystals (PDLCs) with methyl acrylate. The electro‐optical properties of the PDLCs were investigated. The results showed that the glass transition temperature (T_g) of the macroinitiator has a great influence on the memory effect of the resulting PDLCs. Low driving voltage and low memory effect PDLCs could easily be obtained with copolymer macroinitiators. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and properties of crosslinked chiral nanoparticles via RAFT miniemulsion polymerization

Crosslinked chiral nanoparticles were successfully synthesized via reversible addition‐fragmentation chain transfer (RAFT) miniemulsion polymerization of 6‐O‐p‐vinylbenzyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (VBPG) using linear poly(VBPG) as the macro‐RAFT agent. The polymerization of VBPG in the absence of crosslinker was first studied and the kinetic results showed that the molecular weights of the obtained poly(VBPG) increased linearly with the monomer conversion and was in good consistency with the corresponding theoretical ones while there remained a relative narrow polydispersity. The effect of the amount of crosslinker, divinylbenzene, on the nanoparticle size and chiral separation properties of the obtained nanoparticles were investigated in detail using four racemates ±‐3‐Amino‐1,2‐propanediol, D ,L ‐arabinose, D ,L ‐tartaric acid, and D ,L ‐mandelic acid. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1324–1331, 2010     

Controlled syntheses of polythiophene nanoparticles with plain and hollow nanostructures templated from unimolecular micelles

Polythiophene nanoparticles (PTNs), as one of the typical conjugated polymer nanoparticles (CPNs) with novel optical and electronic properties have won extensive attentions, especially their applications in electronics and bioimaging. However, PTNs obtained with traditional methods are usually nonuniform or unstable. Herein, we developed a novel method to prepare uniform and stable PTNs templated from star‐like unimolecular micelles. Cyclodextrin‐cored unimolecular micelles with tailored components were prepared through atom transfer radical polymerization, and PTNs with plain or hollow nanostructures can be obtained via crosslinking the suspended thiophene units in designed domain of unimolecular micelles. The unimolecular micelles and PTNs were characterized via nuclear magnetic resonance, Fourier transform infrared, transmission electron microscopy, atomic force microscopy, dynamic light scattering, ultraviolet–visible, and photoluminescence, indicating that the PTNs exhibit uniform size, controllable surface chemistry, and well‐defined nanostructures. The obtained PTNs have potential applications in optics, electronics, and bioimaging. Also, this provides a new way to synthesize CPNs with tailored sizes, nanostructures, and surface chemistry. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1550–1555     

Tailored composite polymer–metal nanoparticles by miniemulsion polymerization and thiol‐ene functionalization

A simple and modular synthetic approach, based on miniemulsion polymerization, has been developed for the fabrication of composite polymer–metal nanoparticle materials. The procedure produces well‐defined composite structures consisting of gold, silver, or MnFe₂O₄ nanoparticles (～10 nm in diameter) encapsulated within larger spherical nanoparticles of poly(divinylbenzene) (～100 nm in diameter). This methodology readily permits the incorporation of multiple metal domains into a single polymeric particle, while still preserving the useful optical and magnetic properties of the metal nanoparticles. The morphology of the composite particles is retained upon increasing the inorganic content and also upon redispersion in organic solvents. Finally, the ability to tailor the surface chemistry of the composite nanoparticles and incorporate steric stabilizing groups using simple thiol‐ene chemistry is demonstrated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1594–1606, 2010     

Preparation,characterization, and binding profile of molecularly imprinted hydrogels for the peptide hepcidin

Molecularly imprinted hydrogels for the capture of the peptide hormone hepcidin were prepared by water‐in‐oil (w/o) suspension polymerization under mild conditions. Spherical and relatively uniformly sized gel beads were routinely obtained after optimization of the synthetic methodology. The polymers were analyzed by Fourier transform infrared spectroscopy, optical microscopy, and scanning electron microscopy. Although the imprinted materials exhibited higher affinity towards the epitope template (hepcidin N‐terminus) than their corresponding blank polymers, the full‐length target peptide was found strongly bound to all the hydrogels tested. However, by using whole fluorescent hepcidin as the print species, the imprinting effect was more pronounced. Moreover, bovine serum albumin did not bind to the poly N‐isopropylacrylamide (PNIPAm)‐based polymers. Thus, polymeric “sponges” for biomacromolecules with size‐exclusion effect were developed, useful for peptide concentration, immobilization and/or purification from serum samples. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1721–1731, 2010     

Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via surface‐initiated ATRP and their surface properties: The effects of polymerization conditions

A series of superhydrophobic poly(methacryloxypropyltrimethoxysilane, MPTS‐b‐2,‐2,3,3,4,4,4‐heptafluorobutyl methacrylate, HFBMA)‐grafted silica hybrid nanoparticles (SiO₂/PMPTS‐b‐PHFBMA) were prepared by two‐step surface‐initiated atom transfer radical polymerization (SI‐ATRP). Under the adopted polymerization conditions in our previous work, the superhydrophobic property was found to depend on the SI‐ATRP conditions of HFBMA. As a series of work, in this present study, the effects of polymerization conditions, such as the initiator concentration, the molar ratio of monomer and initiator, and the polymerization temperature on the SI‐ATRP kinetics and the interrelation between the kinetics and the surface properties of the nanoparticles were investigated. The results showed that the SI‐ATRP of HFBMA was well controlled. The results also showed that both the surface microphase separation and roughness of the hybrid nanoparticles could be strengthened with the increase of the molecular weight of polymer‐grafted silica hybrid nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Nanometer‐sized polyradical particles: Organic magnetic dot array formed on a silicon microfabricated substrate

A magnetically active, purely organic dot array was formed by the selective deposition of polyradical nanoparticles on array‐like‐formed pits on a silicon substrate. The nanometer‐sized polyradical particles, poly(4‐methacryoyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl), were prepared by the emulsion polymerization of 4‐methacryloyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐acetoxyl followed by a deprotection reaction and oxidation in air. The size (diameter) and radical spin concentration of the polyradical nanoparticles were tunable between the polymerization and oxidation conditions. Electrochemical studies revealed the redox property of the polyradical nanoparticles. The magnetic response image of the polyradical nanoparticles was obtained by magnetic force microscopy, reflecting their radical spin concentrations. These results suggested a possible approach for the use of organic polyradical nanoparticles as organic magnetic dot arrays. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 521–530, 2007     

PMMA‐based core‐shell nanoparticles with various PTFE cores

Polytetrafluoroethylene (PTFE) latices with spherical and rod‐like particles in the submicrometer size range, were employed as seeds in the emulsifier‐free methylmethacrylate (MMA) emulsion polymerization to obtain PTFE‐polymethylmethacrylate (PMMA) core‐shell nanoparticles. Stable latices were generally obtained. No residual PTFE was found at the end of the reaction. By appropriately choosing the ratio between MMA and PTFE in the reaction mixture, particles with predetermined size and monodisperse or narrow size distribution were prepared. The high structural regularity of the core‐shell samples allows the preparation of film with a periodic distribution of the cores thus ultimately leading to a well structured 2D colloidal crystal. A very peculiar crystallization behavior was observed because of the PTFE compartmentalization in the composite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2928–2937, 2009     

New poly(phenylenevinylene)‐methyl methacrylate‐based photonic crystals

Monodisperse colloids have been prepared efficiently by copolymerization of methyl methacrylate and fluorescent first‐ and second‐generation poly(phenylenevinylene) dendrons under surfactant‐free emulsion polymerization conditions. The copolymers were characterized by UV–vis and fluorescence spectroscopy and size exclusion chromatography. Transmission electron microscopy revealed that the copolymers were microspheres with smooth surfaces and narrow dispersity. The bead diameter could be varied by changing the monomer/water ratio. The materials could be crystallized to give polymer opal photonic crystals. The emission was not affected by the periodic structure because of the large spectral distance between the emission and the pseudogap position. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2659–2665, 2010     

Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via two‐step surface‐initiated ATRP: Synthesis,characterization, and wettability

Poly(siloxane‐fluoroacrylate)‐grafted silica hybrid nanoparticles were prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP). The silica nanoparticles with α‐bromo‐ester initiator group for copper‐mediated ATRP were prepared by the self‐assembled monolayers of (3‐aminopropyl)triethoxysilane and 2‐bromoisobutyrate bromide. Well‐defined diblock copolymer brushes consisting of poly(methacryloxypropyltrimethoxysilane) and poly(2,2,3,3,4,4,4‐heptafluorobutyl methacrylate) blocks were obtained by using initial homopolymer brushes as the macroinitiators for the SI‐ATRP of the second monomer. Chemical compositions and structures of the nanoparticles were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. Surface properties and morphology of the nanoparticles were investigated with X‐ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, and water contact angle measurement. It is revealed that the surfaces of the nanocomposites are rough at the microscale and nanoscale. The formation reason of the superhydrophobic surfaces was also discussed in this work. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Preparation,morphology, and biolabeling of fluorescent nanoparticles based on conjugated polymers by emulsion polymerization

Novel nanoparticles based on conjugated polymer with good fluorescent properties were synthesized by Suzuki coupling reaction using certain surfactants as one kind of special emulsion polymerization. The luminescent properties of the prepared nanoparticles could be controlled by selecting different monomers. Without using substances comprising any heavy metal element, these fluorescent nanoparticles show very good biocompatibility with cells, thus showing potential applications in cell biolabeling, drug delivery tracing, organic light‐emitting diodes, flat displays, and other areas. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Anionic polymerization of cyclic ester and amide in miniemulsion: Synthesis and characterization of poly(ε‐caprolactone) and poly(ε‐caprolactone‐co‐ε‐caprolactam) nanoparticles

For the first time, poly(ε‐caprolactone) and poly(ε‐caprolactone‐co‐ε‐caprolactam) nanoparticles were successfully obtained by anionic polymerization of ε‐caprolactone and anionic copolymerization of ε‐caprolactone with ε‐caprolactam, respectively, in heterophase by the miniemulsion technique. After polymerization the resulting dispersions are stable for hours in case of the pure polyester and days for the copolymer. The syntheses were carried out with different continuous phases, amounts of surfactant, initiator, and monomers. The influence of the reaction parameters on the molecular weight of the polymers and on colloidal characteristics like size and morphology of the nanoparticles were studied by dynamic light scattering, gel permeation chromatography, differential scanning calorimetry, nuclear magnetic resonance, and Fourier transform infrared spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010