The POSS side chain epoxy nanocomposite: Synthesis and thermal properties

The IPI‐POSS‐modified epoxy resin (IPEP) was prepared from isocyanato‐propyldinethylsilyl‐isobutyl‐POSS (IPI‐POSS) and diglycidyl ether of bisphenol A epoxy resin. The steric hindrance of the IPEP bulky POSS side chain improved the curing activation energies. The POSS particles sizes were about 2–3 nm and dispersed uniformly. At lower IPEP concentration (POSS < 12 wt %), the glass transition temperatures (T_gs) of the IPEP nanocomposites increased from 118 to 170 °C. The char yield increased from 15 to 20 wt %, and the LOI values increased from 22 to 28. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 643–652, 2010     

Recent advances in sodium alginate-based membranes for dehydration of aqueous ethanol through pervaporation

Sodium alginate (SA) is a progressive material for membrane fabrication. The technological development of SA-based membranes has made a significant contribution to the separation techniques, especially in aqueous organic solutions. The outstanding performance of SA is attributed to its outstanding structural flexibility and hydrophilicity. In view of structural characteristics, SA membranes have immense utilization in the pervaporation separation of organics. Among various organics, dehydration of aqueous ethanol is employed as a standard to check the success of pervaporation (PV) membrane. Because ethanol and water have comparable molecular sizes, thus difficult to extract water from aqueous ethanol mixtures than it is for other organics. A literature survey shows that wide-ranging data are available on the PV performance of SA and its modified membranes. In this context, the present review addresses the recent advances made in SA membranes for enhanced ethanol dehydration performance during the last decade. Available data since 2010 has been compiled for grafted, crosslinked, blend, mixed matrix, and composite hybrid sodium alginate membranes in terms of separation factor, permeation flux, and pervaporation separation index PSI. The data are assessed with reference to the effect of feed composition, membrane selectivity, flux, and swelling behavior.     

Pervaporation dehydration of ethanol–water mixtures with chitosan/hydroxyethylcellulose (CS/HEC) composite membranes: I. Effect of operating conditions

Composite hydrophilic pervaporation membranes were prepared from chitosan blended with hydroxyethylcellulose using cellulose acetate as a porous support. The membranes were tested for dehydration performance of ethanol–water mixtures of ethanol concentrations 70–95 wt.% in the laminar flow region, at temperatures 50–70°C and at permeate pressures of 3–30 mmHg. The composite membrane showed an improved dehydration performance compared with dense CS/HEC membrane developed earlier. The effects of operating conditions also revealed that pervaporation of low water content feed carried out at high feed flow rate and at low temperature and permeate pressure was an advantage.     

SELECTIVE SEPARATION OF WATER-ETHANOL MIXTURES THROUGH COPOLYMERIC MEMBRANES: Ⅰ. ACRYLIC ACID AND ACRYLONITRILE COPOLYMER AND ITS IONIZED MEMBRANES

The copolymer of acrylic acid and acrylonitrile has been synthesized and pervaporation properties of the copolymeric membranes have been investigated. In order to elucidate the influence of membrane-permeate interaction on the pervaporation of water-ethanol mixtures and to prepare much improved membranes, the membranes have been treated with alkali metal, alkali earth metal and transition metal salt aqueous solutions. The treated membranes (ionized membranes) exhibited higher separation factors than the untreated membranes. The separation factors of various alkali metal cation membranes decreased in the following order : Li~+>Na~+>K~+, and the permeation rates showed an opposite tendency. The dependence of pervaporation behavior on the copolymer composition ,feed concentration and operating temperature have been studied with both ionized and non-ionized membranes. The apparent activation energies of water and ethanol permeation were calculated.     

Characterization of PBT/POSS nanocomposites prepared by in situ polymerization of cyclic poly(butylene terephthalate) initiated by functionalized POSS

Novel poly(butylene terephthalate) (PBT)/polyhedral oligomeric silsesquioxane (POSS) nanocomposites were synthesized by ring‐opening polymerization of cyclic poly(butylene terephthalate) initiated by functionalized POSS with various feed ratios. The impact of POSS incorporation on melting and crystallization behaviors of PBT/POSS nanocomposites was investigated by means of X‐ray diffraction and differential scanning calorimetry. It was found that the novel organic–inorganic association result in the significant alterations in the melting and crystallization behavior of PBT. Thermal studies confirmed that the incorporation of POSS can enhance the thermal stability of the polymers, and the copolymer glass transition temperature increased with the increasing of POSS macromonomer content. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1853–1859, 2010     

Pervaporation with chitosan membranes II. Blend membranes of chitosan and polyacrylic acid and comparison of homogeneous and composite membrane based on polyelectrolyte complexes of chitosan and polyacrylic acid for the separation of ethanol-water mixtures

Three different types of blend membranes based on chitosan and polyacrylic acid were prepared from homogeneous polymer solution and their performance on the pervaporation separation of water-ethanol mixtures was investigated. It was found that all membranes are highly water-selective. The temperature dependence of membrane permselectivity for the feed solutions of higher water content (>30 wt%) was unusual in that both permeability and separation factor increased with increase in temperature. This phenomenon might be explained from the aspect of activation energy and suggested that the sorption contribution to activation energy of permeation should not always be ignored when strong interaction occurs in the pervaporation membrane system.A comparison of pervaporation performance between composite and homogeneous membranes was also studied. Typical pervaporation results at 30°C for a 95 wt% ethanol aqueous solution were: for the homogeneous membrane, permeation flux = 33 g/m² h, separation factor = 2216; and for the composite membrane, permeation flux = 132 g/m² h, separation factor = 1008. A transport model consisting of dense layer and porous substrate in series was developed to describe the effect of porous substrate on pervaporation performance.     

Pervaporation dehydration of isopropanol with chitosan membranes

Homogeneous and composite chitosan based membranes were prepared by the solution casting technique. The membranes were investigated for the pervaporation dehydration of isopropanol-water systems. The effects of feed concentration and temperature on the separation performance of the membranes were studied. In terms of the pervaporation separation index (PSI), the composite membrane was more productive than the homogeneous membrane for pervaporation of feed with high isopropanol content. It was observed that permeation increased and the separation factor decreased with the temperature. Modification of the homogeneous chitosan membrane by chemical crosslinking with hexamethylene diisocyanate improved the permselectivity but reduced the permeation rate of the membrane.     

Preparation of plasma-grafted polymer membranes and their morphology and pervaporation properties toward benzene/cyclohexane mixtures

Composite membranes were prepared by plasma-induced graft polymerization of vinyl monomers onto porous substrates of high density polyethylene, and the relationship between the polymerization conditions and morphological structure and pervaporation performance toward benzene/cyclohexane mixtures was investigated in detail. The morphological structures of the plasma-grafted membranes depended on the monomer reactivity, plasma treatment manner, and graft polymerization conditions. Pervaporation properties were closely related to the graft monomers and the morphological structures. The poly(glycidyl methacrylate)-grafted membranes prepared by homogeneous both sides plasma treatment and under mild polymerization conditions showed the highest pervaporation performance with a permeation flux of 0.3 kg/(m² h) and separation factor of 22 at 60 wt % benzene and 70°C. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2247–2259, 1998     

Chitosan/N-methylol nylon 6 blend membranes for the pervaporation separation of ethanol–water mixtures

Blend membranes of chitosan and N-methylol nylon 6 were prepared by solution blending. Their pervaporation performances for the separation of ethanol–water mixtures were investigated in terms of acid (H₂SO₄) post-treatment, feed concentration, blend ratio and temperature. The pervaporation performance of the blend membranes was significantly improved by ionizing with H₂SO₄. The blend ratio of chitosan and N-methylol nylon 6 plays a different role at feed solutions of low and high water content. At a feed solution having low water content, an increase in chitosan content caused a decrease in permeability and an increase in separation factor. At a feed solution having high water content, the permeability increases with an increase in chitosan content, while the separation factor shows a maximum value around 60 wt% chitosan. It is proposed that extra permeation channels generated from the phase separation boundary between ionized chitosan and N-methylol nylon 6 account for the abnormal temperature dependence of pervaporation performance of the blend membranes.     

Performance of Commercial and Laboratory Membranes for Recovering Bioethanol from Fermentation Broth by Thermopervaporation

A poly[1-(trimethylsilyl)-1-propyne] membrane was studied in a thermopervaporation process for ethanol recovery from fermentation media. Four commercial composite membranes based on polysiloxanes (Pervap 4060, Pervatech PDMS, PolyAn, and MDK-3) were studied for comparison. The dependences of the permeate flux, permeate concentration, separation factor, and pervaporation separation index on the temperature of the feed mixture (5 wt % ethanol in water) were obtained. The maximal values of the ethanol concentration in the permeate (35 wt %) and separation factor (10.2) were obtained for the poly[1-(trimethylsilyl)-1-propyne] membrane, whereas the PolyAn membrane provided the highest permeate flux (5.4 kg m^–2 h^–1). The ethanol/ water separation factor for the systems studied has a maximum at 60°С; this temperature of the feed mixture is optimum for recovering ethanol from aqueous media by thermopervaporation. The existing membranes based on polysiloxanes show low ethanol–water selectivity (less than 1). Poly[1-(trimethylsilyl)-1-propyne] membranes are the most promising for recovering bioethanol from fermentation mixtures by thermopervaporation, because they showed the highest selectivity to ethanol.     

Poly(vinyl alcohol) multilayer mixed matrix membranes for the dehydration of ethanol–water mixture

We have developed multilayer mixed matrix membranes (MMMMs) consisting of a selective mixed matrix membrane (MMM) top layer, a porous poly(acrylonitrile-co-methyl acrylate) [poly(AN-co-MA)] intermediate layer and a polyphenylene sulfide (PPS) nonwoven fabrics substrate. The selective MMM layer was formed by incorporating KA zeolite in poly(vinyl alcohol) (PVA) matrix followed by the cross-linking reaction of PVA with fumaric acid. The fumaric acid induced cross-linking reactions were confirmed by Fourier-transformation infrared (FTIR), and their effects on PVA thermal stability and glass transition temperature were characterized by thermolgravimetric analysis (TGA) and differential scanning calorimetry (DSC). The separation performance of the newly developed MMMMs was investigated in terms of permeance and selectivity (as well as flux and separation factor) with respect to zeolite content, feed temperature and composition for the ethanol–water separation by pervaporation. It is found that the separation performance of the MMMM is superior to that of multilayer homogenous membranes (MHM) containing no zeolite. For example, the MMMM with 20 wt.% KA zeolite loading exhibits a much higher selectivity than that of MHM (1279 versus 511) at 60 °C if the feed is a mixture of 80/20 (wt.%) ethanol/water. In addition, the activation energy of the water permeation is significantly reduced from 16.22 to 10.12 kJ/mol after adding of KA zeolite into the PVA matrix, indicating that water molecules require a much less energy to transport through the MMMM because the presence of hydrophilic channels in the framework of zeolite. The excellent pervaporation performance of the MMMM is also resulted from the good contact between zeolite-incorporated and polymer matrix cross-linked by fumaric acid.     

Permeation and separation of benzene/cyclohexane mixtures through liquid-crystalline polymer membranes

The side-chain liquid-crystalline polymer (LCP) was synthesized by the addition of the mesogenic monomer to poly(methylsiloxane) with Pt catalyst. When the benzene/cyclohexane mixtures were permeated through the LCP membranes by pervaporation at various temperatures, the permeation rate increased with increasing benzene concentration in the feed solution and permeation temperature. Though the LCP membranes exhibited a benzene permselectivity, a mechanism of the permeation and separation for the benzene/cyclohexane mixtures was different in the glassy, liquid-crystalline and isotropic state of the LCP membranes. These results suggested that the permselectivity was fairly influenced by the change of the LCP membrane structure, that is, a state transformation. It was found that a balance of the orientation of mesogenic groups and flexibility of siloxane chains is very important for the permeability and selectivity. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 699–707, 1997     

Morphology,dynamics, and order development in a thermoplastic polyurethane with melt blended POSS

A top‐down approach is applied for the production of polyurethane (PU)–polyhedral oligomeric silsesquioxane (POSS) nanocomposites, namely melt blending. As opposed to the typical chemical incorporation during synthesis, a POSS moiety with two hydroxyl groups is melt blended into a commercial thermoplastic polyurethane with mass fraction up to 2 wt %. POSS disperses in the matrix in submicrometer‐sized crystals, as well as in length scale of few tens of nanometers, in the bulk. Phase separation of the produced composites was studied by both standard dynamic and isothermal annealing experiments. In an approach rare in the literature, the dynamics of phase separation is discussed based on isothermal differential scanning calorimetry curves recorded during annealing. The blended‐in nanoparticles affect the micromorphology in a complicated manner, dependent on the intrinsically complex phase separation mechanism of PU. At higher temperatures, POSS slows down the phase separation, whereas at lower ones, it enhances and accelerates it. POSS decreases the mechanical modulus of the final material, presumably as a result of changes in the microphase separation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1133–1142     

Novel nanocomposite pervaporation membranes composed of poly(vinyl alcohol) and chitosan-wrapped carbon nanotube

Novel nanocomposite membranes (PVA–CNT(CS)) were prepared by incorporating chitosan-wrapped multiwalled carbon nanotube (MWNT) into poly(vinyl alcohol) (PVA). To further explore the intrinsic correlation between pervaporation performance and free volume characteristics, molecular dynamics simulation was first introduced to qualitatively analyze the contribution of carbon nanotube incorporation on improving free volume characteristics of the nanocomposite membranes. Secondly, the pervaporation performance of PVA–CNT(CS) nanocomposite membranes was investigated using permeation flux and separation factor as evaluating parameters. For benzene/cyclohexane (50/50, w/w) mixtures at 323 K, permeation flux and separation factor of pure PVA membrane are only 20.3 g/(m² h) and 9.6, respectively, while the corresponding values of PVA–CNT(CS) (CNT content: 1%) nanocomposite membrane are 65.9 g/(m² h) and 53.4. In order to explain the simultaneous increase of permeation flux and separation factor, as well as to check the calculation reliability of molecular dynamics simulation, positron annihilation lifetime spectroscopy (PALS) analysis was employed.     

Chemical-Modified Nylon 4 Membrane for Pervaporation

Abstract

A hydrophilic polymer membrane was synthesized with 2-hydroxyethyl methacrylate (HEMA) onto a Nylon 4 polymer backbone, PHEMA-g-N4. The membranes were water permselective because of the hydrophilicity, and the water permselectivity increased with increasing the degree of grafting. Permseparation of water was investigated with respect to the feed aqueous alcohol concentration, feed temperature, size of the alcohols, and degree of grafting. The separation factors of this PHEMA-g-N4 membrane were higher than those of the unmodified Nylon 4 membrane for pervaporation of aqueous ethanol solution, while the permeation rate was slightly lower. A separation factor of 98 and a 194 g/m²·h permeation rate could be obtained. Compared with an unmodified Nylon 4 membrane, the PHEMA-g-N4 membrane effectively increased the pervaporation separation index for the water-ethanol mixtures on pervaporation separation.     

改性壳聚糖膜用于醇水混合液分离的研究(Ⅱ)─壳聚糖－羧甲基纤维素共混物膜

制备了壳聚糖(CS)─羧甲基纤维素(CMC)共混物膜(I-2),对其成膜反应、溶胀度、交联度及拉伸强度进行了研究,结果表明,壳聚糖与羧甲基纤维素共混物在成膜的同时还发生交联反应;当CS/CMC=1时,交联度最大,此时共混物膜不溶于稀醋酸水溶液。首次将此共混物膜用于乙醇/水混合液的分离,该膜具有优良的醇水分离性能,当CS/CMC=1时,渗透通量和分离因子皆达到最大值[J=0.9kg/(m²·h),a=800,90wt%乙醇,45℃],且该膜的分离因子基本上不随温度变化,醇水透过I-2膜的表现活化能△E为32.6kJ/mol.对CS/CMC2+2+2+2+次序递增,分离因子变化次序则刚好相反。     

PERVAPORATION OF ETHANOL/WATER MIXTURES WITH HIGH FLUX BY ZEOLITE-FILLED PDMS/PVDF COMPOSITE MEMBRANES

Thin-film zeolite-filled silicone/PVDF composite membranes were fabricated by incorporating zeolite particles into PDMS(poly(dimethylsiloxane)) membranes.The morphology of zeolite particles and zeolite filled silicone composite membranes were characterized by SEM.The zeolite-filled PDMS/PVDF composite membranes were applied for the pervaporation of ethanol/water mixtures and showed higher flux compared with that reported in literatures.The effect of zeolite loading and Si/Al ratio of zeolite particles on...     

Vapor permeation of ethanol-water mixtures using sodium alginate membranes with crosslinking gradient structure

For the vapor permeation of ethanol-water mixtures, two types of dense sodium alginate (SA) membranes have been prepared: a nascent SA membrane and crosslinked SA membranes with glutaraldehyde (GA). In the vapor permeation of the concentrated ethanol-water mixtures through the SA membranes, the effects of feed temperature, cell temperature and crosslinking density in the membrane were investigated on the membrane performance, and a comparison of vapor permeation process was made with pervaporation. SA membranes having different crosslinking gradients have been fabricated by exposing the nascent membrane to different GA content of reaction solutions. The extent of the gradient was controlled by the exposing time. The permeation performance of the membranes will be discussed with the extent of the gradient. An optimal crosslinking gradient was determined in terms of flux and membrane stability. The separation of ethanol-water mixtures through the membrane with the optimal crosslinking gradient was carried out by vapor permeation and the permeation performance will be discussed, and compared with pervaporation.     

Anti-trade-off in dehydration of ethanol by novel PVA/APTEOS hybrid membranes

Novel organic–inorganic hybrid membranes were prepared through sol–gel reaction of poly(vinyl alcohol) (PVA) with γ-aminopropyl-triethoxysilane (APTEOS) for pervaporation (PV) separation of ethanol/water mixtures. The membranes were characterized by FTIR, EDX, WXRD and PALS. The amorphous region of the hybrid membranes increased with increasing APTEOS content, and both the free volume and the hydrophilicity of the hybrid membranes increased when APTEOS content was less than 5 wt%. The swelling degree of the hybrid membranes has been restrained in an aqueous solution owing to the formation of hydrogen and covalent bonds in the membrane matrix. Permeation flux increased remarkably with APTEOS content increasing, and water permselectivity increased at the same time, the trade-off between the permeation flux and water permselectivity of the hybrid membranes was broken. The sorption selectivity increased with increasing temperature, and decreased with increasing water content. In addition, the diffusion selectivity and diffusion coefficient of the permeants through the hybrid membranes were investigated. The hybrid membrane containing 5 wt% APTEOS has highest separation factor of 536.7 at 50 °C and permeation flux of 0.0355 kg m⁻² h⁻¹ in PV separation of 5 wt% water in the feed.     

Pervaporation of aromatic/non-aromatic hydrocarbon mixtures through plasma-grafted membranes

Using glycidyl methacrylate (GMA) as a grafting monomer and a porous high density polyethylene film as a substrate, plasma-graft polymerized membranes were prepared by the different plasma treatment manners, namely, homogeneous both-side (HBS) and one side (OS) treatments. The poly(GMA)-grafted membranes displayed two different types of the feed composition dependence of permeation flux and separation factor for pervaporation (PV) of benzene/cyclohexane (Bz/Cx) mixtures, depending on the plasma treatment manner and the graft yield. The membranes prepared by the HBS treatment and under mild polymerization conditions displayed the highest performance with a permeation flux of 0.30–0.37 kg/m² h and a separation factor of 19–22 at feed Bz of 60 wt% and 70°C. The membranes exhibited high performance with excellent durability for PV of other aromatic/aliphatic hydrocarbon mixtures.