Palladium‐catalyzed cyclization of 2‐alkynyl‐N‐ethanoyl anilines to indoles: synthesis,structural, spectroscopic,and mechanistic study

This study reports a facial regio‐selective synthesis of 2‐alkyl‐N‐ethanoyl indoles from substituted‐N‐ethanoyl anilines employing palladium (II) chloride, which acts as a cyclization catalyst. The mechanistic trait of palladium‐based cyclization is also explored by employing density functional theory. In a two‐step mechanism, the palladium, which attaches to the ethylene carbons, promotes the proton transfer and cyclization. The gas‐phase barrier height of the first transition state is 37 kcal/mol, indicating the rate‐determining step of this reaction. Incorporating acetonitrile through the solvation model on density solvation model reduces the barrier height to 31 kcal/mol. In the presence of solvent, the electron‐releasing (–CH₃) group has a greater influence on the reduction of the barrier height compared with the electron‐withdrawing group (–Cl). These results further confirm that solvent plays an important role on palladium‐catalyzed proton transfer and cyclization. For unveiling structural, spectroscopic, and photophysical properties, experimental and computational studies are also performed. Thermodynamic analysis discloses that these reactions are exothermic. The highest occupied molecular orbital?lowest unoccupied molecular orbital gap (4.9–5.0 eV) confirms that these compounds are more chemically reactive than indole. The calculated UV–Vis spectra by time‐dependent density functional theory exhibit strong peaks at 290, 246, and 232 nm, in good agreement with the experimental results. Moreover, experimental and computed ¹H and ¹³C NMR chemical shifts of the indole derivatives are well correlated. Copyright © 2015 John Wiley & Sons, Ltd.     

Computational study on structures,thermochemical properties,and bond energies of disulfide oxygen (S–S–O)‐bridged CH3SSOH and CH3SS(=O)H and radicals

Cleavage of disulfide bonds is a common method used in linking peptides to proteins in biochemical reactions. The structures, internal rotor potentials, bond energies, and thermochemical properties (Δ_fH°, S°, and Cp(T)) of the S–S bridge molecules CH₃SSOH and CH₃SS(=O)H and the radicals CH₃SS?=O and C?H₂SSOH that correspond to H‐atom loss are determined by computational chemistry. Structure and thermochemical parameters (S° and Cp(T)) are determined using density functional Becke, three‐parameter, Lee–Yang–Parr (B3LYP)/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p). The enthalpies of formation for stable species are calculated using the total energies at B3LYP/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p), and the higher level composite CBS–QB3 levels with work reactions that are close to isodesmic in most cases. The enthalpies of formation for CH₃SSOH, CH₃SS(=O)H are ?38.3 and ?16.6 kcal mol^?1, respectively, where the difference is in enthalpy RSO–H versus RS(=O)–H bonding. The C–H bond energy of CH₃SSOH is 99.2 kcal mol^?1, and the O–H bond energy is weaker at 76.9 kcal mol^?1. Cleavage of the weak O–H bond in CH₃SSOH results in an electron rearrangement upon loss of the CH₃SSO–H hydrogen atom; the radical rearranges to form the more stable CH₃SS· = O radical structure. Cleavage of the C–H bond in CH₃SS(=O)H results in an unstable [CH₂SS(=O)H]* intermediate, which decomposes exothermically to lower energy CH₂ = S + HSO. The CH₃SS(=O)–H bond energy is quite weak at 54.8 kcal mol^?1 with the H–C bond estimated at between 91 and 98 kcal mol^?1. Disulfide bond energies for CH₃S–SOH and CH3S–S(=O)H are low: 67.1 and 39.2 kcal mol^?1. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermochemistry,bond energies and internal rotor barriers of methyl sulfinic acid,methyl sulfinic acid ester and their radicals

Sulfur–Oxygen containing hydrocarbons are formed in oxidation of sulfides and thiols in the atmosphere, on aerosols and in combustion processes. Understanding their thermochemical properties is important to evaluate their formation and transformation paths. Structures, thermochemical properties, bond energies, and internal rotor potentials of methyl sulfinic acid CH₃S(?O)OH, its methyl ester CH₃S(?O)OCH₃ and radicals corresponding to loss of a hydrogen atom have been studied. Gas phase standard enthalpies of formation and bond energies were calculated using B3LYP/6‐311G (2d, p) individual and CBS‐QB3 composite methods employing work reactions to further improve accuracy of the ${\Delta} _{{\bf f}} H_{{\bf 298}}^{{\bf o}} $ . Molecular structures, vibration frequencies, and internal rotor potentials were calculated. Enthalpies of the parent molecules CH₃S(?O)OH and CH₃S(?O)OCH₃ are evaluated as ?77.4 and ?72.7 kcal mol^?1 at the CBS? QB3 level; Enthalpies of radicals C^?H₂? S(?O)? OH, CH₃? S^?(?O)₂, C^?H₂? S(?O)? OCH₃ and CH₃? S(?O)? OC^?H₂ (CBS‐QB3) are ?25.7, ?52.3, ?22.8, and ?26.8 kcal mol^?1, respectively. The CH₃C(?O)O—H bond dissociation energy is of 77.1 kcal mol^?1. Two of the intermediate radicals are unstable and rapidly dissociate. The CH₃S(?O)? O. radical obtained from the parent CH₃? S(?O)? OH dissociates into methyl radical (${\bf CH}_{{\bf 3}}^{{\bf .}} $ ) plus SO₂ with endothermicity (ΔH_rxn) of only 16.2 kcal mol^?1. The CH₃? S(?O)? OC^?H₂ radical dissociates into CH₃? S^?=O and CH₂=O with little or no barrier and an exothermicity of ?19.9 kcal mol^?1. DFT and the Complete Basis Set‐QB3 enthalpy values are in close agreement; this accord is attributed to use of isodesmic work reactions for the analysis and suggests this combination of B3LYP/work reaction approach is acceptable for larger molecules. Copyright © 2010 John Wiley & Sons, Ltd.     

Ab initio molecular dynamics study of the reactions of allene cation induced by intense 7 micron laser pulses

ABSTRACT

The isomerisation and fragmentation of allene cation (H₂C=C=CH₂⁺) by short, intense laser pulses were simulated by Born-Oppenheimer molecular dynamics (BOMD) on the ground state potential energy surface using the B3LYP/6-31?+?G(d,p) level of theory and a 10 cycle 7?µm cosine squared pulse with a maximum field strength of 0.07?au. Laser fields polarised along the C=C=C axis deposits an average of 150?kcal/mol in the molecule, compared to only 25 and 51?kcal/mol for perpendicular polarisations. Approximately 90% of the trajectories with the field aligned with the C=C=C axis underwent one or more structural rearrangement steps to form H₂C=CH–CH⁺ (15%), H₃CCCH⁺ (4%), cyclopropene cation (6%), and allene cation with rearranged hydrogens and carbons (47%). In addition, a variety of fragments including H₂CCCH⁺?+?H (10%), c-C₃H₃⁺?+?H (7%), and HCCCH⁺?+?H₂ (2%) trajectories were produced after isomerisation. With the same amount of thermal energy, field-free BOMD shows good agreements with the BOMD with the field. However, RRKM calculations favour isomerisation to propyne cation and dissociation to HCCCH⁺?+?H₂. This suggests that for molecules in intense laser fields the energy in the intermediate isomers is not distributed statistically.     

Anharmonic effect of the dissociation rate constant of the unimolecular reactions of CH2XCHFO (X = H,F)

This study examines six unimolecular reactions of CH₂XCHFO (X?=?H,?F). The geometries of the reactions are optimized with Gaussian 03. The calculated barrier heights show that bond C–C′ scission, CH₂XCHFO (X?=?H,?F)?→?CH₂X?+?CHFO (R1), dominates the decomposition of CH₂XCHFO. For X?=?H and X?=?F, the barrier heights of (R1) are 13.37 and 9.67?kcal?mol^?1, respectively. The YL (Yao and Lin) method is used to calculate the anharmonic and harmonic rate constants of the unimolecular reactions. The results clearly demonstrate the anharmonic effect of these reactions. In the microcanonical case, for (R1) (X?=?H), the total energy is from 42.78 to 144.84?kcal?mol^?1. The corresponding anharmonic rate constants are from 1.57?×?10¹² to 2.52?×?10^13?s^?1 and the harmonic rate constants are from 1.52?×?10¹² to 2.52?×?10^13?s^?1.     

Quantum chemical studies of the OH-initiated oxidation reactions of propenols in the presence of O2

ABSTRACT

The atmospheric oxidation mechanisms of 1- and 2-propenol initiated by OH radical have been theoretically investigated at the CCSD(T)//BH&;HLYP/6-311?+?+G(d,p) level of theory. Conventional transition state theory was employed to predict the rate constants for the initial reaction channels. The calculations clearly indicate that OH-addition channels contribute maximum to the total reaction, both for 1- and 2-propenol, while H-abstraction channels can be neglected at the temperature range of 220–520?K. The calculated total rate constants at 298?K are 1.66?×?10^?11 and 7.69?×?10^?12 cm³?molecule^?1?s^?1 respectively for 1- and 2-propenol, which are in reasonable agreement with the experimental values of similar systems (vinyl ethers?+?OH reactions). The deduced Arrhenius expressions are k(OH?+?1-propenol)?=?1.43?×?10^?12 exp[(743.7?K)/T] and k(OH?+?2-propenol)?=?2.86?×?10^?12 exp[(310.5?K)/T] cm³?molecule^?1?s^?1. Under atmospheric condition, the OH-addition intermediates (CH₃C?HCH(OH)₂, CH₃CH(OH)C?H(OH), CH₃CH(OH)₂?CH₂, CH₃?C(OH)CH₂(OH)) are likely to react rapidly with O₂, the theoretically identified major products for 1-propenol are HCOOH, CH₃CHO and CH₃CH(OH)CHO, and the dominant products for 2-propenol are CH₃COOH, HCHO and CH₃COCH₂OH, both companied with the regeneration of OH and HO₂ radicals (crucial reactive radicals in the atmosphere).     

Substituent effects on conformational preference in α‐substituted α‐fluorophenylacetic acid methyl ester model systems for chiral derivatizing agents

In connection with study of chiral derivatizing agents (CDAs) for NMR determination of absolute configuration of organic compounds, factors controlling the conformational preference between syn‐ and anti‐forms in α‐substituted α‐fluorophenylacetic acid methyl ester (FC(X)(Ph)COOMe) model systems were theoretically investigated. Substituents X at the stereogenic carbon atom were X = H, C?CH and CH₃, the electronic and steric properties of which were significantly different from each other. The model system with X = C?CH and that with X = CH₃ were found to be possible candidates for fluorine‐containing CDAs. The syn conformation is stable compared with the anti one by 0.7 kcal mol^?1 for the ester with X = C?CH. On the other hand, the anti conformation is stable compared with the syn one by 0.5 kcal mol^?1 for the ester with X = CH₃. Both natural bond orbital (NBO) analysis and deletion of selected orbitals based on the donor–acceptor NBO scheme were adopted for semi‐quantitative estimation of factors responsible for the conformational preference as well as a qualitative inspection of occupied canonical molecular orbitals (MOs). It was shown that [σ–(σ* + π*)(C?O)] and [σ–σ*(Ph) and π(Ph)–σ*] hyperconjugations are the main factors controlling the conformational preferences between the syn and anti conformations. Other types of effects such as electrostatic effects were also investigated. The role of the fluorine atom was also clarified. Copyright © 2009 John Wiley & Sons, Ltd.     

Steric effects on the mechanism of reaction of nucleophilic substitution of β‐substituted alkoxyvinyl trifluoromethyl ketones with four secondary amines

The kinetics of the reaction of β‐substituted β‐alkoxyvinyl trifluoromethyl ketones R¹O‐CR²?CH‐COCF₃ ( 1a – e ) [( 1a ), R¹?C₂H₅, R²?H; ( 1b ), R¹?R²?CH₃; ( 1c ), R¹?C₂H₅, R²?C₆H₅; ( 1d ), R¹?C₂H₅, R²?V^?pNO₂C₆H₄; ( 1e ), R¹?C₂H₅, R²?C(CH₃)₃] with four aliphatic amines ( 2a – d ) [( 2a ), (C₂H₅)₂NH; ( 2b ), (i‐C₃H₇)₂NH; ( 2c ), (CH₂)₅NH; ( 2d ), O(CH₂CH₂)₂NH] was studied in two aprotic solvents, hexane and acetonitrile. The least reactive stereoisomeric form of ( 1a – d ) was the most populated ( E‐s‐Z‐o‐Z ) form, whereas in ( 1e ), the more reactive form ( Z‐s‐Z‐o‐Z ) dominated. The reactions studied proceeded via common transition state formation whose decomposition occurred by ‘uncatalyzed’ and/or ‘catalyzed’ route. Shielding of the reaction centre by bulky β‐substituents lowered abruptly both k′ (‘uncatalyzed’ rate constant) and k″ (‘catalyzed’ rate constant) of this reaction. Bulky amines reduced k″ to a greater extent than k′ as a result of an additional steric retardation to the approach of the bulky amine to its ammonium ion in the transition state. An increase in the electron‐withdrawing ability of the β‐substituent increased ‘uncatalyzed’ k′ due to the acceleration of the initial nucleophile attack (k₁) and ‘uncatalyzed’ decomposition of transition state (k₂) via promoting electrophilic assistance (through transition state 8 ). The amine basicity determined the route of the reaction: the higher amine basicity, the higher k₃/k₂ ratio (a measure of the ‘catalyzed’ route contribution as compared to the ‘uncatalyzed’ process) was. ‘Uncatalyzed’ route predominated for all reactions; however in polar acetonitrile the contribution of the ‘catalyzed’ route was significant for amines with high pK_a and small bulk. Copyright © 2007 John Wiley & Sons, Ltd.     

Comparative studies on CH⋯F− hydrogen bond formation in benzene and exocyclically substituted pentafulvene derivatives

Optimization of CH?F^? complexes of exo‐substituted pentafulvene and meta‐substituted and para‐substituted benzene (substituents: NMe₂, NHMe, NH₂, NHOH, OH, OMe, Br, Cl, F, Me, CCH, CF₃, CONH₂, COMe, CHO, NO₂, NO, and CN) have been performed at the density functional theory level by using Becke hybrid B3LYP functional with 6‐311++G(d,p) basis set. The acidity of the ring CH bond in benzene and fulvene are of similar magnitude, whereas the acidity of the fulvene exocyclic CH₂ group is significantly higher. Various properties based on the H?F^? hydrogen bond (bond length, electron density at BCP, and bond dissociation energy), and the whole molecule (HOMA, sEDA, pEDA, substituent active region, and substituent effect stabilization energy) were analyzed and compared between the fulvene and benzene systems. Sensitivity of the ring CH?F^? hydrogen bond and other substituent dependent properties to substituent effect is substantially greater in fulvene than that of benzene derivatives. In fulvene, the 3‐position is more sensitive than the 4‐position. The sEDA and pEDA parameters used to measure sigma‐electron and pi‐electron excess/deficiency of the ring are mutually correlated for the studied systems. Copyright © 2013 John Wiley & Sons, Ltd.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

Can tetra‐tert‐butylethylene be formed by ion–ion recombination or ion–molecule reaction of two di‐tert‐butylcarbene units?—a DFT study

The reaction channels of di‐tert‐butylcarbene ( 2 ), its radical anion, ( 3 ) and its radical cation ( 4 ) were investigated theoretically by using DFT/B3LYP with 6‐31+G(d) basis set and 6‐311+G(2d,p) for single point energy calculations. Conversion of the neutral carbene 2 to the charged species 3 and 4 results in significant geometric changes. In cation 4 two different types of C? (CH₃)₃ bonds are observed: one elongated sigma bond called “axial” with 1.61 Å and two normal sigma bonds with a bond length of 1.55 Å. Species 2 and 4 have an electron deficient carbon center; therefore, migration of CH₃ and H is observed from adjacent tert‐butyl groups with low activation energies in the range of 6–9 kcal/mol like similar Wagner–Meerwein rearrangements in the neopentyl‐cation system. Neutral carbene 2 shows C? H insertion to give a cyclopropane derivative with an activation energy of 6.1 kcal/mol in agreement with former calculations. Contrary to species 2 and 4 , the radical anion 3 has an electron rich carbon center which results in much higher calculated activation energies of 26.3 and 42.1 kcal/mol for H and CH₃ migrations, respectively. NBO charge distribution indicates that the hydrogen migrates as a proton. The central issue of this work is the question: how can tetra‐tert‐butylethylene ( 1 ) be prepared from reaction of either species 2 , 3 , or 4 as precursors? The ion–ion reaction between 3 and 4 to give alkene 1 with a calculated reaction enthalpy of 203.5 kcal/mol is extremely exothermic. This high energy decomposes alkene 1 after its formation into two molecules of carbene 2 spontaneously. Ion–molecule reaction of radical anion 3 with the neutral carbene 2 is a much better choice: via a proper oriented charge–transfer complex the radical anion of tetra‐tert‐butylethylene (11) is formed. The electron affinity of 1 was calculated to be negligible. Copyright © 2010 John Wiley & Sons, Ltd.     

Estimation of microbial methane generation and oxidation rates in the municipal solid waste landfill of Kaluga city,Russia

Using a theoretical model and mass isotopic balance, biogas (methane and CO₂) released from buried products at their microbial degradation was analysed in the landfill of municipal and non-toxic industrial solid organic waste near Kaluga city, Russia. The landfill contains about 1.34×10⁶ tons of waste buried using a ‘sandwich technique’ (successive application of sand–clay and waste layers). The δ¹³C values of biogenic methane with respect to CO₂ were?56.8 (±2.5) ‰, whereas the δ¹³C of CO₂ peaked at+9.12‰ (+1.4±2.3‰ on average), reflecting a virtual fractionation of carbon isotopes in the course of bacterial CO₂ reduction at the landfill body. After passing through the aerated soil layers, methane was partially oxidised and characterised by δ¹³C in the range of?50.6 to?38.2‰, evidencing enrichment in ¹³C, while the released carbon dioxide had δ¹³C of?23.3 to?4.04‰, respectively. On the mass isotopic balance for the δ¹³C values, the methane production in the landfill anaerobic zone and the methane emitted through the aerated landfill surface to the atmosphere, the portion of methane oxidised by methanotrophic bacteria was calculated to be from 10 to 40% (averaged about 25%). According to the theoretical estimation and field measurements, the annual rate of methane production in the landfill reached about 2.9(±1.4)×10⁹ g C CH₄ yr^?1 or 5.3(±2.6)×10⁶ m³ CH₄ yr^?1. The average rates of methane production in the landfill and methane emission from landfill to the atmosphere are estimated as about 53 (±26) g C CH₄ m^?2 d^?1 (or 4 (±2) mol CH₄ m^?2 d^?1) and 33 (±12) g C CH₄ m^?2 d^?1 (or 2.7 (±1) mol CH₄ m^?2 d^?1), respectively. The calculated part of methane consumed by methanotrophic bacteria in the aerated part of the landfill was 13(±7) g C CH₄ m^?2 d^?1 (or 1.1(±0.6) mol CH₄ m^?2 d^?1) on average.     

Composition,temperature and radiation induced changes in gamma irradiated AAAMPS copolymer

Effect of composition, temperature and radiation dose in gamma irradiated acrylamide-2-acrylamido-2-methyl propane sulphonic acid (AA) copolymer has been investigated by electron spin resonance (ESR) and fourier transform infrared (FTIR) techniques. ESR spectra of gamma irradiated AA copolymer have been recorded under different conditions. The observed ESR spectra are analysed by computer simulation techniques, to separate the constituent component spectra. Magnetic parameters employed to simulate the component spectra enabled the identification of corresponding free radicals. The AA copolymer with low acrylamide content composed of macroradicals of the type ?CH₂?CH?CH₂? and methyl radicals (CH₃) whereas the copolymer with high acryl amide content possess methyl radicals and radicals of the type ?CH₂?C(CONH₂)?CH₂?/CH₃?C?CH₃. Reasons for the variation in the formation of free radicals have been explained. The observed changes in ESR spectra of irradiated AA copolymer at higher temperatures are thought to be due to the recombination of free radicals. Formation of free radicals found to be enhanced with the increase in dose of irradiation. FTIR spectra of pure and irradiated copolymers have also confirmed the previous results.     

Basicity of trifluoromethylsulfonylformamidines. DFT and FTIR study and NBO analysis

The effect of the electron–acceptor substituent CF₃SO₂ at the imine nitrogen atom on the basicity and the electron distribution in N,N‐alkylformamidines ( 1 , 2 , 3 , 4 , 5 ) was studied experimentally by the FTIR spectroscopy and theoretically at the DFT (B3LYP/6‐311+G(d,p)) level of theory, including the natural bond orbital (NBO) analysis. The calculated proton affinities of the imine nitrogen atom and the sulfonyl oxygen (PA_N′ and PA_O) depend on the atomic charges, the C?N′ and N′―S bond polarity and on the energy of interaction of the amine nitrogen and the oxygen lone pairs with antibonding π* and σ*‐orbitals. The basicity of the imine nitrogen atom is increased with the increase of the electron‐donating power of the substituent at the amine nitrogen atom due to stronger interaction n_N → π*_C?N′, but is decreased for the electron‐withdrawing groups MeSO₂ and CF₃SO₂ at the imine nitrogen atom in spite of the increase of this conjugation. Protonation of ( 1 , 2 , 3 , 4 , 5 ) in CH₂Cl₂ solution in the presence of CF₃SO₃H occurs at the imine nitrogen atom, while the formation of hydrogen bonds with 4‐fluorophenol takes place at the sulfonyl oxygen atom, whose basicity is lower than that of N,N′‐dimethylmethanesulfonamide but higher than of N,N′‐dimethyltrifluoromethanesulfonamide. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical study on structures and stability of SiC3S isomers

Various levels of calculations are carried out to explore the potential energy surfaces (PES) of singlet and triplet SiC₃S, a molecule of potential interest in interstellar chemistry. At the DFT/B3LYP/6-311G(d) level, a total of 57 minimum isomers and 92 interconversion transition states are located. The structures of the most relevant isomers and transition states are further optimized at the QCISD/6-311G(d) level followed by CCSD(T)/6-311?+?G(2df) single-point energy calculations. At the QCISD level, the lowest-lying isomer is the chain-like SiCCCS ³ 1 (0.0?kcal/mol) with a great kinetic stability of 54.1?kcal/mol. In addition, ring isomers CC-cCSSi ¹ 9 (19.8?kcal/mol), S-cCCCSi ¹ 12 (30.4?kcal/mol), S-cCCSiC ¹ 18 (9.4?kcal/mol), S-cSiCCC ¹ 21 (34.4?kcal/mol) and cage-like isomer cage-SiSCCC ¹ 23 (51.8?kcal/mol) also possess considerable kinetic stability (more than 10.0?kcal/mol). As a result, these six isomers are predicted to be possible candidates for future experimental and astrophysical detection. The bond natures and possible formation pathways in interstellar space of the SiCCCS are discussed. The predicted structure and spectroscopic properties for it are expected to be informative for the identification of SiC₃S and even larger SiC _n S species either in laboratory or in space.     

Proton transfer reactions of hydrazine‐boranes

Hydrazine‐borane and hydrazine‐diborane contain, respectively, 15.4 and 16.9 wt% of hydrogen and are potential materials for hydrogen storage. In this work we present the gas‐phase complexation energies, acidities, and basicities of hydrazine‐borane and hydrazine‐bisborane calculated at MP2/6‐311 + G(d,p) level. We also report the release of dihydrogen from both protonated complexes (ΔG_{hydrazine‐borane} = ?20.9 kcal/mol and ΔG_{hydrazine‐bisborane} = ?27.2 kcal/mol) which is much more exergonic than from analogues amine‐boranes. The addition of the first BH₃ to the hydrazine releases 17.1 kcal/mol, and the second addition releases 15.8 kcal/mol. The attachment of BH₃ also increases the N―H acidity of hydrazine by 46.3 kcal/mol. It was found that the B―H deprotonation leads to intramolecular rearrangement. The basicity values for hydrazine‐borane and ‐bisborane are 180 and 172.8 kcal/mol, respectively. For both complexes the protonation centres are located at the boron moiety. The protonated structure of hydrazine‐bisborane is cyclic and can be described as H₂ captured between a negatively charged B―H hydrogen and positive boron (B―H??H2??B). Atoms in molecules analysis are used to investigate bond paths in concerning structures. Copyright © 2015 John Wiley & Sons, Ltd.     

Substituent effects on cyclonona‐3,5,7‐trienylidenes: a quest for stable carbenes at density functional theory level

Nine boat‐shaped cyclonona‐3,5,7‐trienylidenes are compared and contrasted with respect to their multiplicity, nucleophilicity, electrophilicity, band gap (ΔE_{HOMO ? LUMO}), Natural bond orbital (NBO) atomic charge, force constant, as well as the aptitude for dimerization, and rearrangement through proper isodesmic reactions at B3LYP/AUG‐cc‐pVTZ and B3LYP/6‐311++G**//B3LYP/6‐31+G* levels of theory. The nine cyclic carbenes include unsubstituted (1_CH2) plus eight α‐cyclopropylcyclonona‐3,5,7‐trienylidenes, which are substituted with ?‐SiMe₂, ?‐NMe, ?‐PMe, ?‐O, ?‐S, ?‐CH₂, ?‐cyclopropyl, and ?‐CMe₂ (2_SiMe2, 2_NMe, 2_PMe, 2_O, 2_S, 2_CH2, 2_cyclopropyl, and 2_CMe2, respectively). The latter eight species enjoy the stabilizing interaction of the occupied Walsh orbital of cyclopropyl with the vacant p_π orbital of the carbene center (Walsh_cyclopropyl → p_{π carbene}). Among them, the singlet closed shell 2_NMe appears the most promising for exhibiting the highest relative singlet–triplet energy gap (ΔE_{s ? t} = 27.1 kcal mol^?1). In contrast, the least stable derivative is triplet 2_SiMe2, which exhibits the lowest relative ΔE_{s ? t} of ?5.5 kcal mol^?1. The overall trend of ΔE_s‐t is 2_NMe > 2_PMe > 2_S > 2_O > 2_cyclopropyl > 2_CMe2 > 2_CH2 > 1_CH2 > 2_SiMe2. With one negative force constant, the unsubstituted 1_CH2 turns out to be a transition state, whereas the rest emerge as minima. Copyright © 2015 John Wiley & Sons, Ltd.     

Structures,vibrational spectra,and relative energetics of FC(O)ONO and FC(O)NO2 isomers at DFT and ab initio levels

The structural and vibrational parameters of FC(O)ONO and FC(O)NO₂ isomers were examined theoretically using the B3LYP/6-311+G(3df) and CCSD(T)/6-311G(d) methods. Four conformers of FC(O)ONO isomer and one FC(O)NO₂ isomer are found here. Among them, the trans–cis and cis–cis FC(O)ONO configuration are new conformers. The energetics were refined with G3//B3LYP and CBS-QB3 calculations. The trans–trans conformer of the FC(O)ONO isomer is found to be the lowest energy structure, with an estimated heat of formation of ?104.9 kcal mol^?1 at 0 K as determined from CBS-QB3 theory. The next lowest structure is the cis–trans FC(O)ONO lying 1.7 kcal mol^?1 above the trans–trans structural form. The highest energy structure is the FC(O)NO₂ isomer with a predicted heat of formation of ?84.8 kcal mol^?1. A comparison of the relative stability of the FCNO₃ isomers with the isomers of ClCNO₃ shows that the Cl analogues follow the same pattern of stability, as do the F isomers. However, the chlorine isomers are unstable relative to their fluorine analogues.     

Theoretical study on C100 fullerenes and C96X4 (X=N,P, B,Si)

The geometrical structures and electronic properties of six fullerene isomers of C₁₀₀ were studied at the HF/6-31G^? and B3LYP/6-31G^? levels, respectively. The results of the fully optimized calculations show that three C₁₀₀ isomers 449:D₂, 425:C₁ and 442:C₂ are near isoenergetic isomers. The energies and properties of C₁₀₀ hexaanions were calculated. The C₁₀₀^6? (450:D₅) isomer is predicted to be the most stable isomer at the B3LYP/6-31G^? level, and the C₁₀₀^6? (449:D₂) isomer is 44.1 kcal/mol higher in energy. The heterofullerenes C₉₆X₄ (X=N, P, B, Si) formed from the initial C₁₀₀ (449:D₂) have also been investigated at the B3LYP/6-31G^? level. The HOMO–LUMO gaps and aromaticities show that the replacement of fullerene carbon atoms with four heteroatoms can enhance the electronic stabilization of C₁₀₀ (449:D₂).     

Intramolecular Diels–Alder reaction in enyne–allenes: a computational investigation and comparison with the Myers–Saito and Schmittel reactions

The reaction mechanisms as well as substituted effect and solvent effect of the enyne–allenes are investigated by Density Functional Theory (DFT) method and compared with the Myers–Saito and Schmittel reactions. The Myers–Saito reaction of non‐substituted enyne–allenes is kinetically and thermodynamically favored as compared to the Schmittel reaction; while the concerted [4 + 2] cycloaddition is only 1.32 kcal/mol higher than the C₂? C₇ cyclization and more exothermic (Δ_RE = ?69.38 kcal/mol). For R₁ = CH₃ and t‐Bu, the increasing barrier of the C₂? C₇ cyclization is higher than that for the C₂? C₆ cyclization because of the steric effect, so the increased barrier of the [4 + 2] cycloaddition is affected by such substituted electron‐releasing group. Moreover, the strong steric effect of R₁ = t‐Bu would shift the C₂? C₇ cyclization to the [4 + 2] cycloaddition. On the other hand, for R₁ = Ph, NH₂, O^?, NO₂, and CN substituents, the barrier of the C₂? C₆ cyclization would be more diminished than the C₂? C₇ cyclization due to strong mesomeric effect; the reaction path of C₂? C₇ cyclization would also shift to the [4 + 2] cycloaddition. The solvation does not lead to significant changes in the potential‐energy surface of the reaction except for the more polar surrounding solvent such as dimethyl sulfoxide (DMSO), or water. Copyright © 2009 John Wiley & Sons, Ltd.