Intrinsic viscosities of sodium carboxymethylcellose in acetonitrile–water mixed solvent media using isoionic dilution method

Precise measurements on the viscosities of the solutions of sodium carboxymethylcellulose in water and in two acetonitrile–water mixtures containing 10 and 20 vol % of acetonitrile have been reported at 35, 40 and 50 °C. Isoionic dilutions were performed with the total ionic strengths of the solutions maintained with sodium chloride at ～4.20 × 10^?4 and 1.45 × 10^?3 mol dm^?3 of NaCl to obtain the intrinsic viscosities. The Huggins constants were also obtained from the experimental results. The influences of the medium, the temperature, and the total ionic strength on the intrinsic viscosities as well as on the Huggins constants have been interpreted from the points of view of the solvodynamic and thermodynamic interactions prevailing in the polyelectrolyte solution under investigation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1765–1770, 2007     

海藻酸钠在KCl水溶液中的粘度行为

通过测定海藻酸钠水溶液的特性粘数及在低高于强度的条件下其浓度与比浓粘度关系曲线上的峰值，系统地研究了KCl浓度在2×10（－5）－0.5mol·L（-1）范围内对海藻酸钠溶液粘度行为的影响．根据Odijk－Skolnick－Fixman理论和Rinaudo的处理方法，从理论上对海藻酸钠溶液的粘度行为进行了探讨．研究结果表明：聚电解质溶液的电粘滞效应可使用静电相关长度得到合理解释     

Complexes of lysozyme with sodium (sulfamate‐carboxylate)isoprene/ethylene oxide double hydrophilic block copolymers

Complexes between sodium (sulfamate‐carboxylate)isoprene/ethylene oxide double hydrophilic block copolymers and lysozyme, a globular protein, were formed in aqueous solutions, at pH 7, because of electrostatic interactions between the anionic groups of the polyelectrolyte block of the copolymers and the cationic groups of lysozyme. The structure of the complexes was investigated as a function of the anionic/cationic charge ratio of the two components in solution and ionic strength by static, dynamic, and electrophoretic light scattering, atomic force microscopy, and fluorescence spectroscopy. The mass and size of the micellar‐like complexes depend on the mixing ratio and the molecular characteristics (molecular weight, composition, and architecture) of the copolymer used. Complexation persists at 0.15M NaCl, the value for physiological saline, as a result of additional hydrophobic interactions between the copolymers and the enzyme. Fluorescence spectroscopy measurements indicate that the secondary structure of lysozyme does not change substantially after complex formation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 509–520, 2007     

Solvodynamic Properties of Sodium Polystyrenesulfo-nate in Methanol-Water Mixed Solvent Media in Absence and in the Presence of a Salt Using Viscometric Method

Linear extrapolation of the reduced viscosity values of uncharged polymer solutions as the concentration approaches zero constitutes the basis for the traditional method for the determination of the intrinsic viscosities of polymer solutions. While this method works well for uncharged polymer solutions, it fails completely for polyelectrolyte solutions especially in absence and also in presence of small amount of an added electrolyte. A very convenient method has recently been proposed by Wolf (Wolf, Macromol. Rapid Commun. 2007, 28, 164) to determine the intrinsic viscosities of polyelectrolyte solutions on the basis of the laws of phenomenological thermodynamics applied to the viscosity of polymer solutions. In spite of the success and the convenience of this method, this has so far been applied to a limited number of polyelectrolyte systems by the Wolf group alone (Wolf, Macromol. Rapid Commun. 2007, 28, 164; Eckelt et al., Macromolecules 2008, 41, 912; Badiger et al., Macromol. Chem. Phys. 2008 , 209, 2087; Ghimici et al., J. Phys. Chem.B. 2009, 113, 8020). In order to improve the situation, we have measured the viscosities of an anionic polyelectrolyte, sodium polystyrenesulfonate, in methanol-water mixed solvent media both in absence and in the presence of an electrolyte, sodium chloride. The results show that the experimental data fit well with the Wolf model and thus allow the calculation of intrinsic viscosities, which provide important insight about the dependence of the polyion conformation on solvent composition as well as on the concentration of the added electrolyte. This new evaluation method, thus, proves to be very useful to a better understanding of the rheological behaviour of the polyelectrolyte system investigated.     

Electrostatic complexation of a double hydrophilic block polyelectrolyte and proteins of different molecular shape

The electrostatic complexation between the polyelectrolyte block of the novel double hydrophilic copolymer quaternized poly(3,5‐bis(dimethylaminomethylene) hydroxystyrene)‐b‐poly(ethylene oxide) (QNPHOS‐PEO) and proteins of different molecular shape, that is globular bovine serum albumin (BSA) or rod‐like bovine fibrinogen (FBG), is investigated by means of dynamic, static, and electrophoretic light scattering, as well as analytical ultracentrifugation measurements. The solution behavior, structure, and properties of the formed complexes at pH 7 and 0.01 M ionic strength, as a function of the protein concentration in the solution (or equivalently the charge ratio of the two components), depend on the protein concentration and molecular characteristics. Moreover, the structure of the complexes is greatly influenced by the intrinsic structure of the block polyelectrolyte, which forms rather loose multichain aggregates, due to hydrophobic interactions. A direct correlation between the stability of the preformed complexes against the increase of the solution ionic strength and their structure is established. Finally, the spectroscopic structural investigation of both complexed proteins reveals no signs of protein denaturation upon complexation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1515–1529     

pH‐responsive ampholytic terpolymers of acrylamide,sodium 3‐acrylamido‐3‐methylbutanoate,and (3‐acrylamidopropyl)trimethylammonium chloride. II. Solution properties

The solution properties of low‐charge‐density ampholytic terpolymers of acrylamide, sodium 3‐acrylamido‐3‐methylbutanoate, and (3‐acrylamidopropyl)trimethylammonium chloride were studied as functions of the solution pH, ionic strength, and polymer concentration. Terpolymers with low charge densities, large charge asymmetries, or both exhibited excellent solubility in deionized (DI) water, and higher charge density terpolymers were readily dispersible in DI water; however, the higher charge density terpolymer solutions separated into polymer‐rich and polymer‐poor phases upon standing over time. Charge‐balanced terpolymers exhibited antipolyelectrolyte behavior at pH values greater than or equal to the ambient pH (6.5 ± 0.2); the same terpolymers behaved increasingly as cationic polyelectrolytes with decreasing solution pH because of the protonation of the 3‐acrylamido‐3‐methylbutanoate (AMB) repeat units. Unbalanced terpolymers generally exhibited polyelectrolyte behavior, although the effects of intramolecular electrostatic attractions (i.e., polyampholyte effects) on the hydrodynamic volume of the unbalanced terpolymer coils were evident at certain values of the solution pH and salt concentration. The dilute‐solution behavior of the terpolymers correlated well with the behavior predicted by several polyampholyte solution theories. In the semidilute regime, solution viscosities increased with increasing terpolymer charge density, and this indicated a significant enhancement of the solution viscosity by intermolecular electrostatic associations. Upon the addition of NaCl, semidilute‐solution viscosities tended to decrease because of the disruption of the intermolecular electrostatic associations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3252–3270, 2004     

Transport,and thermodynamic investigations on sodium polystyrenesulfonate in ethylene glycol–water media

Polyion–counterion interactions in sodium polystyrenesulfonate dissolved in (ethylene glycol + water) mixed solvent media have been investigated conductometrically with special reference to their variations as functions of polyelectrolyte concentration, relative permittivity and temperature. Manning counterion condensation theory for polyelectrolyte solutions failed to describe the present experimental results. The data have, therefore, been analyzed using a new model for semidilute polyelectrolyte conductivity which takes into account the scaling arguments proposed by Dobrynin et al. The fractions of uncondensed counterions were found to depend on the polyelectrolyte concentration varying from 0.27 to 0.37, within the concentration range investigated here, indicating a strong interaction between counterions and polyion. A considerable fraction of the counterions is shown to migrate in the same direction as the polyions. The results further demonstrate that the monomer units experience more frictional resistance in solutions as the ethylene glycol content of the mixture increases or as the temperature decreases.     

Solubility and partial molar volume of carbon dioxide and ethane in crosslinked poly(ethylene oxide) copolymer

Experimental solubility and sorptive dilation data are reported for carbon dioxide and ethane in a crosslinked poly(ethylene oxide) (XLPEO) rubbery copolymer. Five different temperatures (253 ≤ T(K) ≤ 308) were considered, with a maximum gas pressure of 2.09 MPa (20.6 atm). The polymer was prepared by photopolymerization of a solution containing 70 wt % poly(ethylene glycol) methyl ether acrylate (PEGMEA) and 30 wt % poly(ethylene glycol) diacrylate (PEGDA). Sorption isotherms were described by the Flory‐Huggins model. For each gas, the Flory‐Huggins interaction parameter was a decreasing function of temperature and did not show a composition dependence. Dilation and sorption data were combined to calculate the partial molar volume (PMV) of the gases in the polymer, which was an increasing function of temperature. Based on a comparison with literature data for a XLPEO homopolymer prepared from pure PEGDA over the same range of operating conditions, an effect of the network composition on both gas solubility and PMV was found. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 456–468, 2010     

A unified analytical treatment of the acid-dissociation equilibria of weakly acidic linear polyelectrolytes and the conjugate acids of weakly basic linear polyelectrolytes

 The influence of added sodium chloride concentration levels on the acid-dissociation equilibria of a weakly acidic linear polyelectrolyte and a conjugate acid of weakly basic linear polyelectrolyte has been investigated potentiometrically by use of polyacrylic acid (PAA) and poly(N-vinylimidazole) (PVIm) as examples of polyelectrolytes. Both equilibria are strongly influenced by the degree of dissociation of the polyacids as well as the concentration levels of sodium chloride due to an electrostatic effect originating from the negatively or positively charged polymer surfaces. These have been analyzed in a unified manner by taking accounts of two-phase properties of the charged linear polyions. Distribution of counterions and coions between a polyelectrolyte phase formed around the polymer skeleton and a bulk solution phase has been rationalized by a Donnan’s relation. Introduction of a volume term for the polyelectrolyte phase permits definition of averaged concentrations of mobile ions in the vicinity of the polyion molecules, which enables us to define hypothetical intrinsic acid-dissociation constants in the polyion domain. The intrinsic constants estimated by extrapolation of apparent acid-dissociation constants at zero-charge state are in good agreement with the acid-dissociation constants of the monomer analogs of the polymers, i.e., acetic acid for PAA and imidazole for PVIm, respectively. The difference between the apparent and intrinsic acid-dissociation constants for PVIm was much higher than that for PAA at defined degree of dissociation of the polyacids, even though the separations of the functionalities fixed on the linear polymers are approximately equal to each other. Received: 4 February 1997 Accepted: 26 May 1997     

Infinite-dilution viscoelastic properties of sodium poly(styrene sulfonate)

The storage and loss shear moduli G′ and G″ of dilute solutions of two samples of sodium poly(styrene sulfonate) with molecular weights (M) of 3.28 × 10⁵ have been measured. The Birnboim–Schrag multiple-lumped resonator technique was used in the frequency range 100–8000 Hz, and the intrinsic moduli were obtained by extrapolation to infinite dilution. Measurements were performed over the temperature range from 1.0 to 25.0°C in aqueous solvents containing from 0 to 60% by weight glycerol and from 0.001 to 0.005M added salt. The large intrinsic viscosities indicated high extension of the polymer, and the frequency dependences of G′ and G″ were matched well by hybrid relaxation spectra combining rodlike and coil-like behavior. In a solvent containing 0.001M sodium ion and no glycerol, the end-over-end rotational relaxation times for the two molecular weights corresponded to proportionality to the 1.7 power of M. With increasing molecular weight, ionic strength, and/or glycerol concentration, the polyelectrolyte appeared to become less extended, and its behavior more nearly coil-like.     

A new method for determination of intrinsic viscosity

The Huggins and Kraemer equations generally used to determine intrinsic viscosity frequently do not yield identical results, and their constants often do not add up to 1/2 as is mathematically required. To overcome these difficulties an equation has been deduced which through linear plots gives unambiguous intrinsic viscosities, constants which meet the 1/2 condition, as well as two other flow constants. Extensive tests of the equation with precise data on solutions of poly(methyl methacrylates) and polystyrenes in benzene and toluene confirm the validity of the new equation in every respect. It is further shown that the four constants involved are interrelated, and that it is possible to express the values of three of these in terms of the fourth.     

Polyelectrolyte complexation between poly(methacrylic acid,sodium salt) and poly(diallyldimethylammonium chloride) or poly[2‐(methacryloyloxyethyl) trimethylammonium chloride]

Polyelectrolyte complexes between poly(methacrylic acid, sodium salt) and poly(diallyldimethylammonium chloride) (PDADMAC) or poly[2‐(methacryloyloxyethyl)trimethylammonium chloride] (PMOETAC) form gels, liquid phases, or soluble complexes depending on charge ratio, total polymer loading, polymer molecular weight, and ionic strength. Increasing the ionic strength of the medium led most polyelectrolyte pairs to transition from gel through liquid complexes (complex coacervate) to soluble complexes. These transitions shift to higher ionic strengths for higher molecular weight polymers, as well as for PMOETAC compared to PDADMAC. The complex phases swelled with increasing polymer loading, ultimately merging with the supernatant phase at a critical polymer loading. The isolated liquid complex phases below and above this critical loading were temperature‐sensitive, showing cloud points followed by macroscopic phase separation upon heating. Incorporating 5 mol % lauryl methacrylate into the polyanion led to increased complex yield with PDADMAC, and increased resistance to ionic strength. In contrast, incorporating 30 mol % of oligo(ethylene glycol) methacrylate into the polyanion led to decreased complex yield, and to lower resistance to ionic strength. Two polyelectrolyte systems that produced liquid complexes were used to encapsulate hydrophobic oils, and in one case were used to demonstrate the feasibility of crosslinking the resulting capsule walls. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4129–4143, 2007     

Synthesis of networked polymers with lithium counter cations from a difunctional epoxide containing poly(ethylene glycol) and an epoxide monomer carrying a lithium sulfonate salt moiety

Poly(ethylene glycol)‐based networked polymers that had lithium sulfonate salt structures on the network were prepared by heating a mixture of poly(ethylene glycol) diglycidyl ether (PEGGE), poly(ethylene glycol) bis(3‐aminopropyl) terminated (PEGBA), and an ionic epoxy monomer, lithium 3‐glycidyloxypropanesulfonate (LiGPS). Flexible self‐standing networked polymer films showed high thermal stability, low crystallinity, low glass transition temperature, and good mechanical strength. The materials were ion conductive at room temperature even under a dry condition, although the ionic conductivity was rather low (10^?6 to 10^?5 S/m). The ionic conductivity increased with the increase in temperature to above 1 × 10^?4 S/m at 90 °C. The film samples became swollen by immersing in propylene carbonate (PC) or PC solution of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The samples swollen in PC showed higher ionic conductivity (ca.1 × 10^?3 S/m at room temperature), and the samples swollen in LiTFSI/PC showed much higher ionic conductivity (nearly 1 S/m at room temperature). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3113–3118, 2010     

Structure and mechanism formation of polyelectrolyte complex obtained from PSS/PAH system: effect of molar mixing ratio, base–acid conditions, and ionic strength

Colloidal dispersions of polyelectrolyte complexes were prepared in aqueous solutions. We have used mixtures containing the strongly charged anionic polyelectrolyte sodium polystyrene sulfonate (PSS) and the weak cationic polyelectrolyte polyallylamine hydrochloride (PAH). Both polymers have the same molecular weight. The complexes were obtained by adding drop by drop a solution of the anionic polyelectrolyte to excess cationic polyelectrolyte. In these conditions, sodium polystyrene sulfonate and polyallylamine hydrochloride self-assembled in nanometer-range complexes; the self-assembly is driven by electrostatic interactions, as well as by entropy changes due to counterion release. The electrostatic interactions were controlled in several ways: by changing the C _PSS/C _PAH concentration ratio, by modifying the pH (and thus the protonation degree of polyallylamine hydrochloride), and by adding sodium chloride (screened interactions). Dynamic light scattering experiments demonstrated that the hydrodynamics radius of the polyelectrolyte complex increases, changing from soluble to insoluble complex formation, when some physicochemical parameters are increased: the concentration ratio between polyelectrolytes, the sodium chloride concentration, and pH. Zeta potential measurements, as a function of the C _PSS/C _PAH concentration ratio, as well as of pH and ionic strength, allow us to state that the resulting particles have a structure constituted by a neutral core surrounded by a positively charged shell. The polyelectrolyte complexes have globular shapes, as observed by electron microscopy.     

Anomalous viscosity behavior of rodlike polyelectrolytes: Partially sulfonated poly(2-benzoyl-1,4-phenylene)s in aqueous solution

Two stereoisomeric poly(2-benzoyl-1,4-phenylene)s were synthesized. Polymer I has exclusively a head-to-tail structure; however, polymer II contains both head-to-head and head-to-tail units. The sulfonation reaction of polymers I and II was found to occur mainly on the meta position of the benzoyl group on the phenylene backbone. The viscosities of polymers Ia (27% sulfonated) and Ic (51% sulfonated) in aqueous solutions at 25°C were measured with and without NaBr addition. Upon the addition of NaBr (0.05 and 0.1M), the reduced viscosities were found to increase gradually and reach a constant value in each case after standing at room temperature for 30–40 h. Without NaBr, the time effect was not found. The reduced viscosities of solutions with NaBr were also higher than those without the salt. These results are quite different from the typical “polyelectrolyte” behavior. A possible explanation of the salt effect of rigid rodlike polymers such as sulfonated poly(2-benzoyl-1,4-phenylene) is discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1425–1429, 1998     

Double hydrophilic block copolymers of sodium(2‐sulfamate‐3‐carboxylate)isoprene and ethylene oxide

Poly(sodium(2‐sulfamate‐3‐carboxylate)isoprene)‐b‐poly(ethylene oxide) and poly(ethylene oxide)‐b‐poly(sodium(2‐sulfamate‐1‐carboxylate)isoprene)‐b‐poly(ethylene oxide) double hydrophilic block copolymers were prepared by selective post polymerization reaction of the polyisoprene block, of poly(isoprene‐b‐ethylene oxide) diblocks or poly(ethylene oxide‐b‐isoprene‐b‐ethylene oxide) triblock precursors, with N‐chlorosulfonyl isocyanate. The precursors were synthesized by anionic polymerization high vacuum techniques and had narrow molecular weight distributions and predictable molecular weights and compositions. The resulting double hydrophilic block copolymers were characterized by FTIR and potentiometric titrations in terms of the incorporated functional groups. Their properties in aqueous solutions were studied by viscometry and dynamic light scattering. The latter techniques revealed a complex dilute solution behavior of the novel block copolymers, resulting from the polyelectrolyte character of the functionalized PI block and showing a dependence on solution ionic strength and pH. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 606–613, 2006     

Ionizable hydrogels of new type based on poly(ethylene glycol) phosphates

Partly charged poly(ethylene oxide) networks have been prepared by the cure reaction of multifunctional poly(ethylene glycol) phosphate precursors with the diglycidyl ether of triethylene glycol as a crosslinking agent. These new hydrogels display all the features of swelling behaviour characteristics of polyelectrolyte networks. The degree of volume swelling of the hydrogels varies from 16–95 (in distilled water) to 11–45 (in 0.1 M sodium chloride solution) and 7–20 ml/ml (in 0.52 M potassium sulfate as a Θ-solvent). Average chain length, ionic group content, and structure of gels are evaluated from the swelling data.The gelation point occurs at much higher crosslinking ratios and overall P-OH groups conversion than those predicted from the precursor functionality. The role of possible side reactions and some kinetic reasons for the ‘delayed’ gelation are discussed.     

Polyelectrolyte Configuration of Low Molecular Weight Sodium Amylose Xanthate in Aqueous and Salt Solutions

The polyelectrolyte chain configuration of low molecular weight sodium amylose xanthate (NaAX) in aqueous and salt solutions has been studied by viscometry and light scattering. The viscometric results in aqueous solution have been found to be in accordance with the Fuoss's modified equation. The intrinsic viscosities of NaAX in salt solutions from 0.00125 to 0.25 M NaCl have been determined and the expansion factor a at each ionic strength has been determined. The dependence of a on ionic strength has been studied according to the theories of Hermans and Overbeek, Flory, etc. But though qualitative agreement between experimental and theoretical results has been found, quantitative agreement was far from expectations. The frictional coefficient per monomer unit | has been calculated from the relationship of Kirkwood and Riseman. The NaAX macromolecule has been found to have the polydispersed random coil chain configuration in 0.25 M NaCl. Some macromolecular configurational parameters such as effective bond length b, Kuhn-Kuhn equivalent chain length A_m, and steric factor α has been determined.     

Complexation of linear and poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride) with poly(ethylene oxide‐block‐sodium methacrylate)

The interactions between oppositely charged polyelectrolytes were studied in saline aqueous solutions as functions of the temperature and the salt and polymer concentrations. The polyanion was a diblock copolymer composed of a poly(ethylene oxide) block and a poly(sodium methacrylate) block. Two polycations were used, the homopolymer poly(methacryl oxyethyl trimethylammonium chloride) and its poly(ethylene oxide)‐grafted analogue. By dynamic light scattering and turbidity measurements, it was observed that the salt concentration, temperature, and counterion size had a significant effect on the formation of the polymer complexes in aqueous solutions. At a fixed salt concentration and a fixed temperature, it was possible to form completely soluble complexes of an ionic polymer in aqueous solutions between poly(ethylene oxide)‐grafted poly(methacryl oxyethyl trimethylammonium chloride)and the polyanion with a poly(ethylene oxide) block at a 1:1 anion/cation ratio. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1904–1914, 2003