Negative ion fragmentations of deprotonated peptides containing post‐translational modifications. An unusual cyclisation/rearrangement involving phosphotyrosine; a joint experimental and theoretical study

The characteristic fragmentations of a pTyr group in the negative ion electrospray mass spectrum of the [M–H]^? anion of a peptide or protein involve the formation of PO (m/z 79) and the corresponding [(M‐H)^?–HPO₃]^? species. In some tetrapeptides where pTyr is the third residue, these characteristic anion fragmentations are accompanied by ions corresponding to H₂PO and [(M‐H)^?–H₃PO₄]^? (these are fragmentations normally indicating the presence of pSer or pThr). These product ions are formed by rearrangement processes which involve initial nucleophilic attack of a C‐terminal ‐CO [or ‐C(?NH)O^?] group at the phosphorus of the Tyr side chain [an S_N2(P) reaction]. The rearrangement reactions have been studied by ab initio calculations at the HF/6‐31+G(d)//AM1 level of theory. The study suggests the possibility of two processes following the initial S_N2(P) reaction. In the rearrangement (involving a C‐terminal carboxylate anion) with the lower energy reaction profile, the formation of the H₂PO and [(M‐H)^?–H₃PO₄]^? anions is endothermic by 180 and 318 kJ mol^?1, respectively, with a maximum barrier (to a transition state) of 229 kJ mol^?1. The energy required to form H₂PO by this rearrangement process is (i) more than that necessary to effect the characteristic formation of PO from pTyr, but (ii) comparable with that required to effect the characteristic α, β and γ backbone cleavages of peptide negative ions. Copyright © 2009 John Wiley & Sons, Ltd.     

Nonlinear dynamics in the oxidations of substituted thioureas I: The reaction of 4‐methyl‐3‐thiosemicarbazide with acidic iodate [1]

The substituted thiourea, 4‐methyl‐3‐thiosemicarbazide, was oxidized by iodate in acidic medium. In high acid concentrations and in stoichiometric excess of iodate, the reaction displays an induction period followed by the formation of aqueous iodine. In stoichiometric excess of methylthiosemicarbazide and high acid concentration, the reaction shows a transient formation of aqueous iodine. The stoichiometry of the reaction is: 4IO + 3CH₃NHC(S)NHNH₂ + 3H₂O → 4I⁻ + 3SO + 3CH₃NHC(O)NHNH₂ + 6H⁺ (A). Iodine formation is due to the Dushman reaction that produces iodine from iodide formed from the reduction of iodate: IO + 5I⁻ + 6H⁺ → 3I₂(aq) + 3H₂O (B). Transient iodine formation is due to the efficient acid catalysis of the Dushman reaction. The iodine produced in process B is consumed by the methylthiosemicarbazide substrate. The direct reaction of iodine and methylthiosemicarbazide was also studied. It has a stoichiometry of 4I₂(aq) + CH₃NHC(S)NHNH₂ + 5H₂O → 8I⁻ + SO + CH₃NHC(O)NHNH₂ + 10H⁺ (C). The reaction exhibits autoinhibition by iodide and acid. Inhibition by I⁻ is due to the formation of the triiodide species, I, and inhibition by acid is due to the protonation of the sulfur center that deactivates it to further electrophilic attack. In excess iodate conditions, the stoichiometry of the reaction is 8IO + 5CH₃NHC(S)NHNH₂ + H₂O → 4I₂ + 5SO + 5CH₃NHC(O)NHNH₂ + 2H⁺ (D) that is a linear combination of processes A and B. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 193–203, 2000     

Thermochemistry of the Ternary Complex Nd（Et2dtc）3（phen）

Introduction A series of lanthanide sulfide complexes have beenlargely used for ceramics and thin film materials1 andthese complexes could be prepared from the precursorswhich are the compounds containing lanthanide-sulfurbonds.2-4 For instance, the compounds synthesized with[(alkyl)2dtc]-, phen?H2O and lanthanide salts were usedas the volatile precursors for preparing lanthanide sul-fide, its friction properties in lubricant was investigatedin literature 5 and the preparation and propertie…     

Neutral and Cationic Hexanuclear Rhenium Phosphine Clusters with μ3‐(Phosphido‐Chalcogenido), μ3‐(Arsenido‐Chalcogenido), and μ3‐(Imido or Oxo‐Chalcogenido) Hetero Ligand Shells

Reactions of dry THF/MeCN solutions of Ca[Re₆SCl(Cl^a)₆] with silylated derivatives E(SiMe₃)₂ (E = PhAs, PSiMe₃, HN, O, S) and addition of trialkylphosphine PPr₃ afford in high yields and at room temperature either the neutral clusters [Re₆SX(PPr₃)] ( 1 : X = As, 2 : X = P) or the ionic compounds [Re₆SX(PPr₃)]²⁺ · [Re₆S₆Cl₈]^2– ( 3 : X = NH, 4 : X = O, 5 : X = S). The compounds 1 – 5 were characterised by X‐ray crystal structure analysis. A di‐substitution reaction occurs on the {Re₆SCl}⁴⁺ cluster core, where the two inner μ₃‐chloro ligands Clⁱ are substituted by X (X = As, P, NH, O, S) and all six terminal chloro ligands Cl^a are exchanged by terminal PPr₃‐ligands.     

One‐ to Three‐Dimensional CuI and CuCN Based Coordination Polymers containing the Alkali Cation Ligating Thiacrown Ether 1, 10‐Dithia‐18‐Crown‐6

Treatment of an acetonitrile solution of CuI with 1, 10‐dithia‐18‐crown‐6 (1, 10DT18C6) in the presence of Rb₂CO₃ leads to formation of the lamellar coordination polymer [Rb{Cu₄I₅(1, 10DT18C6)₂}] ( 1 ).The anionic network of 1 is composed of parallel [(Cu₄I₅)^—] chains linked by bridging thiacrown ether ligands, pairs of which coordinate the Rb⁺ counter cations. [Cs{Cu₅I₆(1, 10DT18C6)₂}] ( 2 ) can be prepared under similar conditions but contains separated helical anionic chains. In this case 1, 10DT18C6 ligands bridge copper atoms of individual chains in an intrastrand manner. In contrast the coordination networks in [(CuCN)₂(1, 10DT18C6)] ( 3 ) and [K₂{Cu₁₂(CN)₁₄(1, 10DT18C6)₃} · CH₃CN] ( 4 ) are both three‐dimensional and based on CuCN‐containing sheets bridged by 1, 10DT18C6 ligands. In the latter compound pairs of K⁺ cations are coordinated by groups of three thiacrown ether molecules. The neutral network of 3 can imbibe up to 31 % KNO₃ per 1, 10DT18C6 pair without loss of lattice integrity.     

Density functional study of S(N) 2 substitution reactions for CH(3) Cl + CX(1) X(2•-) (X(1) X(2) = HH, HF, HCl, HBr, HI, FF, ClCl, BrBr, and II)

A systematic investigation on the S_N2 displacement reactions of nine carbene radical anions toward the substrate CH₃Cl has been theoretically carried out using the popular density functional theory functional BHandHLYP level with different basis sets 6‐31+G (d, p)/relativistic effective core potential (RECP), 6‐311++G (d, p)/RECP, and aug‐cc‐pVTZ/RECP. The studied models are CX¹X^2?? + CH₃Cl → X²X¹CH₃C^? + Cl^?, with CX¹X^2?? = CH₂^??, CHF^??, CHCl^??, CHBr^??, CHI^??, CF₂^??, CCl₂^??, CBr₂^??, and CI₂^??. The main results are proposed as follows: (a) Based on natural bond orbital (NBO), proton affinity (PA), and ionization energy (IE) analysis, reactant CH₂^?? should be a strongest base among the anion‐containing species (CX¹X^2??) and so more favorable nucleophile. (b) Regardless of frontside attacking pathway or backside one, the S_N2 reaction starts at an identical precomplex whose formation with no barrier. (c) The back‐S_N2 pathway is much more preferred than the front‐S_N2 one in terms of the energy gaps [ΔE(front)?ΔE(back)], steric demand, NBO population analysis. Thus, the back‐S_N2 reaction was discussed in detail. On the one hand, based on the energy barriers (ΔE and ΔE) analysis, we have strongly affirmed that the stabilization of back attacking transition states (b‐TSs) presents increase in the order: b‐TS‐CI₂ < b‐TS‐CBr₂ < b‐TS‐CCl₂ < b‐TS‐CHI < b‐TS‐CHBr < b‐TS‐CHCl < b‐TS‐CF₂ < b‐TS‐CHF < b‐TS‐CH₂. On the other hand, depended on discussions of the correlations of ΔE with influence factors (PA, IE, bond order, and ΔE), we have explored how and to what extent they affect the reactions. Moreover, we have predicted that the less size of substitution (α‐atom) required for the gas‐phase reaction with α‐nucleophile is related to the α‐effect and estimated that the reaction with the stronger PA nucleophile, holding the lighter substituted atom, corresponds to the greater exothermicity given out from reactants to products. © 2012 Wiley Periodicals, Inc. J Comput Chem, 2012     

Franck-Condon simulation of the photoelectron spectrum of AsCl₂ and the photodetachment spectrum of AsCl ₂⁻ employing UCCSD(T)-F12a potential energy functions: IE and EA of AsCl₂

The currently most reliable theoretical estimates of the adiabatic ionization energies (AIE₀) from the X?²B₁ state of AsCl₂ to the X?¹A₁ and ã³B₁ states of AsCl, and the electron affinity (EA₀) of AsCl₂, including ΔZPE corrections, are calculated as 8.687(11), 11.320(23), and 1.845(12) eV, respectively (estimated uncertainties based on basis‐set effects at the RCCSD(T) level). State‐of‐the‐art ab initio calculations, which include RCCSD(T), CASSCF/MRCI, and explicitly correlated RHF/UCCSD(T)‐F12x (x = a or b) calculations with basis sets of up to quintuple‐zeta quality, have been carried out on the X?²B₁ state of AsCl₂, the X?¹A₁, ã³B₁, and ùB₁ states of AsCl, and the X?¹A₁ state of AsCl. Relativistic, core correlation and complete basis‐set (CBS) effects have been considered. In addition, computed UCCSD(T)‐F12a potential energy functions of relevant electronic states of AsCl₂, AsCl, and AsCl were used to calculate Franck–Condon factors, which were then used to simulate the valence photoelectron spectrum of AsCl₂ and the photodetachment spectrum of AsCl, both yet to be recorded. Lastly, we have also computed the AIE and EA values for NCl₂, PCl₂, and AsCl₂ at the G4 level and for SbCl₂ at the RCCSD(T)/CBS level. The trends in the AIE and EA values of the group V pnictogen dichlorides, PnCl₂, where Pn = N, P, As, and Sb, were examined. The AIE and EA of PCl₂ were found to be smaller than those of AsCl₂, contrary to the order expected from the IE values of P and As. © 2011 Wiley Periodicals, Inc. J Comput Chem, 2011     

Probing the ultrafast photoelectron spectra of Br2 molecule

The time‐dependent‐wave‐packet method is applied to study the ionization of Br₂ molecule with four ionization processes. The ground state absorption makes the photoelectron to be left in the three final ionic states: Br (X²∑), Br (A²∏_u), and Br (B²∑), and each population of these ionic states is related with the laser intensities. The information of the dissociation can be got by analyzing the photoelectron features of the transient wave packet, which also suggests that an ionization process occurs during the dissociation, and the Br atoms that mainly resulted from the dissociation of Br₂ (C¹∏_u) are ionized at later time delays as the dissociation is nearly complete. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Reaction mechanism of platinum dimer cation with ammonia based on the relativistic density functional study

The gas‐phase reactions between Pt and NH₃ have been investigated using the relativistic density functional approach (ZORA‐PW91/TZ2P). The quartet and doublet potential energy surfaces of Pt + NH₃ have been explored. The minimum energy reaction path proceeds through the following steps: Pt(⁴Σ_u) + NH₃ → q‐1 → d‐2 → d‐3 → d‐4 → d‐Pt₂NH⁺ + H₂. In the whole reaction pathway, the step of d‐2 → d‐3 is the rate‐determining step with a energy barrier of 36.1 kcal/mol, and exoergicity of the whole reaction is 12.0 kcal/mol. When Pt₂NH⁺ reacts with NH₃ again, there are two rival reaction paths in the doublet state. One is degradation of NH and another is loss of H₂. In the case of degradation of NH, the activation energy is only 3.4 kcal/mol, and the overall reaction is exothermic by 8.9 kcal/mol. Thus, this reaction is favored both thermodynamically and kinetically. However, in the case of loss of H₂, the rate‐determining step's energy barrier is 64.3 kcal/mol and the overall reaction is endothermic by 8.5 kcal/mol, so it is difficult to take place. Predicted relative energies and barriers along the suggested reaction paths are in reasonable agreement with experimental observations. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Laser ablation of ternary As‐S‐Se glasses and time‐of‐flight mass spectrometric study

Ternary chalcogenide As‐S‐Se glasses, important for optics, computers, material science and technological applications, are often made by pulsed laser deposition (PLD) technology but the plasma composition formed during the process is mostly unknown. Therefore, the formation of clusters in a plasma plume from different glasses was followed by laser desorption ionization (LDI) or laser ablation (LA) time‐of‐flight mass spectrometry (TOF MS) in positive and negative ion modes. The LA of glasses of different composition leads to the formation of a number of binary As_pS_q, As_pSe_r and ternary As_pS_qSe_r singly charged clusters. Series of clusters with the ratio As:chalcogen = 3:3 (As₃S, As₃S₂Se⁺, As₃SSe), 3:4 (As₃S, As₃S₃Se⁺, As₃S₂Se, As₃SSe, As₃Se), 3:1 (As₃S⁺, As₃Se⁺), and 3:2 (As₃S, As₃SSe⁺, As₃Se), formed from both bulk and PLD‐deposited nano‐layer glass, were detected. The stoichiometry of the As_pS_qSe_r clusters was determined via isotopic envelope analysis and computer modeling. The structure of the clusters is discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Characterization of the First Bisand Tris[1‐(ω‐alken‐1‐yl)indenyl]lanthanide Complexes

1‐Allyl‐2,4,7‐trimethyl‐1 H‐indene ( 1 ) and 1‐(3‐buten‐1‐yl)‐4,7‐dimethyl‐1 H‐indene ( 2 ), which are to prepare from (2,4,7‐trimethylindenyl)lithium and allyl chloride or from (4,7‐dimethylindenyl)lithium and 4‐bromo‐1‐butene, react with n‐butyllithium yielding (1‐allyl‐2,4,7‐trimethylindenyl)lithium [LiL ( 1 a )] or [1‐(3‐buten‐1‐yl)‐4,7‐dimethylindenyl]lithium [LiL′ ( 2 a )], respectively. The reactions of the trichlorides of gadolinium, erbium, yttrium, lutetium, and ytterbium with 1 a or 2 a (mole ratio 1 : 2) in THF produce the bis(indenyl)lanthanide chloride complexes L₂LnCl(THF) [Ln = Gd ( 1 b ), Er ( 1 c )], LLnCl(THF) [Y ( 2 d ), Lu ( 2 e )], or LYb(μ‐Cl)₂Li(THF)₂ ( 2 f ), whereas the trichlorides of the comparatively large samarium and lanthanum ions react with different molar amounts of 2 a in THF exclusively with formation of the tris(indenyl) complexes LSm ( 2 g ) or LLa(μ‐Cl)Li(Et₂O)₃ ( 2 h ), respectively. All new compounds were characterized by elemental analyses, mass spectrometry, and the diamagnetic compounds 2 d , 2 e and 2 h also by ¹H and ¹³C{¹H}‐NMR spectroscopy. The single crystal X‐ray structural analyses of 1 c , 2 f , 2 g and 2 h demonstrate that the alkenyl groups of the indenyl side chains are not coordinated to the lanthanide atoms.     

Kinetics and mechanism of the reaction of CH3O with NO

The kinetics of the reaction of CH₃O with NO and the branching ratio for HCHO product formation, obtained as Γ_HCHO = (Rate of HCHO formation) / (Rate of CH₃O decay), have been studied using a discharge flow reactor. Laser induced fluorescence has been used to monitor the decay of the CH₃O radical and the build-up of the HCHO product. Overall rate constants and product branching ratios were measured at room temperature over the pressure range of 0.72–8.5 torr He. Three reaction mechanisms were considered which differed in the routes of HCHO formation: (i) direct disproportionation; (ii) via an energized collision complex; or (iii) both reaction routes. It has been shown that data on the pressure dependence of the overall rate constant are not sufficient to distinguish between these mechanisms. In addition, an accurate value of Γ is required. Analysis of the available experimental data provided 0.0 and about 0.1 as the lower and upper limit for Γ, respectively. Since the rate constants derived for CH₃ONO formation were not sensitive to the value assumed for Γ, k = (1.69 ± 0.69) × 10^?29 cm⁶ molecule^?2 s^?1 and k = (2.45 ± 0.31) × 10^?11 cm³ molecule^?1 s^?1 could be derived. The rate constant obtained for formaldehyde formation when extrapolated to zero pressure is k = (3.15 ± 0.92) × 10^?12 cm³ molecule^?1 s^?1. © 1994 John Wiley & Sons, Inc.     

Darstellung,Schwingungsspektren und Kristallstrukturen von [(Ph3P)2N]2[(W6Cl)I] · 2 Et2O · 2 CH2Cl2 und [(Ph3P)2N]2[(W6Cl)(NCS)] · 2 CH2Cl2

Synthesis, Crystal Structures, and Vibrational Spectra of [(Ph₃P)₂N]₂[(W₆Cl )I ] · 2 Et₂O · 2 CH₂Cl₂ and [(Ph₃P)₂N]₂[(W₆Cl )(NCS) ] · 2 CH₂Cl₂ By treatment of [(W₆Cl)I]^2– with (SCN)₂ in dichloromethane at –20 °C the hexaisothiocyanato cluster anion [(W₆Cl)(NCS)]^2– is formed. X‐ray structure determinations have been performed on single crystals of [(Ph₃P)₂N]₂[(W₆Cl)I] · 2 CH₂Cl₂ · 2 Et₂O ( 1 ) (triclinic, space group P1, a = 10.324(5), b = 14.908(3), c = 17.734(8) Å, α = 112.78(2)°, β = 99.13(3)°, γ = 92.02(3)°, Z = 1) and [(Ph₃P)₂N]₂[(W₆Cl)(NCS)] · 2 CH₂Cl₂ ( 2 ) (triclinic, space group P1, a = 11.115(2), b = 14.839(2), c = 17.036(3) Å, α = 104.46(1)°, β = 105.75(2)°, γ = 110.59(1)°, Z = 1). The thiocyanate ligands of 2 are bound exclusively via N atoms with W–N bond lengths of 2.091–2.107 Å, W–N–C angles of 173.1–176.9° and N–C–S angles of 178.1–179.3°. The vibrational spectra exhibit characteristic innerligand vibrations at 2067–2045 (ν_CN), 879–867 (ν_CS) and 490–482 (δ_NCS). Based on the molekular parameters of the X‐ray determination of 1 the vibrational spectra of the corresponding (n‐Bu₄N) salt of 1 are assigned by normal coordinate analysis. The valence force constants are f_d(WW) = 1.61, f_d(WI) = 1.23 and f_d(WCl) = 1.10 mdyn/Å.     

Gas‐phase intramolecular anion rearrangements of some trimethylsilyl‐containing systems revisited. A theoretical approach

Ab initio calculations at the CCSD(T)/6‐311++G(2d,p)//B3LYP/6‐311++G(d,p) level of theory have been carried out for three prototypical rearrangement processes of organosilicon anion systems. The first two are reactions of enolate ions which involve oxygen–silicon bond formation via three‐ and four‐membered states, respectively. The overall reactions are: The ΔG (reaction) values for the two processes are +175 and +51 kJ mol^?1, with maximum barriers (to the highest transition state) of +55 and +159 kJ mol^?1, respectively. The third studied process is the following: (CH₃O)C(?CH₂)Si(CH₃)₂CH → (CH₃)₂(C₂H₅)Si^? + CH₂CO, a process involving an S_Ni reaction between ‐CH and CH₃O‐ followed by silicon–carbon bond cleavage. The reaction is favourable [ΔG(reaction) = ?39 kJ mol^?1] with the barrier for the S_Ni process being 175 kJ mol^?1. The previous experimental and the current theoretical data are complementary and in agreement. Copyright © 2009 John Wiley & Sons, Ltd.     

Über Tris[(trialkylphosphan)gold(I)]oxonium-tetrafluoroborate und Tris[(triphenylphosphan)gold(I)]sulfonium-tetrafluoroborat

On Tris[(trialkylphosphine)gold(I)]oxonium Tetrafluoroborates and Tris[(triphenylphosphine)gold(I)]sulfonium Tetrafluoroborate [Et₃PAu]⁺BF, obtained from Et₃PAuCl and AgBF₄ in tetrahydrofuran, reacts with KOH (molar ratio 3:1) to give the oxonium salt [(Et₃P)Au]₃O⁺BF ( 1 ). The homologous [^t(Bu₃P)Au]₃O⁺BF ( 2 ) is generated similarly from ^tBu₃PAuCl and Ag₂O in the presence of NaBF₄ in THF. The composition and identity of these two first tris[(tri alkyl phosphine)gold(I)]oxonium salts have been confirmed by analytical and spectroscopic data. The compounds are useful aurating agents. From the corresponding triphenylphosphine complex and (Me₃Si)₂S quantitative yields of the sulfonium salt [(Ph₃P)Au]₃S⁺BF ( 3 ) are obtained. Its crystal structure features monomeric cations, and in these small Au? S? Au angles indicate significant metal-metal bonding.     

Spectroscopic studies on the dynamics of charge‐transfer interaction of pantoprazole drug with DDQ and iodine

Spectrophotometric method was used to study the kinetics of charge‐transfer (CT) complexes of pantoprazole with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) and iodine. The reactions of DDQ and iodine with pantoprazole have been investigated in different solvents at three different temperatures. The products of the interactions have been isolated and characterized using UV–vis, GC‐MS, FT‐IR, and far‐IR spectral techniques. The rate of formation of the product has been measured and discussed as a function of solvents and temperature. The iodine complex indicates the formation of the tri‐iodide CT complex with a general formula [(PTZ)I]⁺I. The characteristic strong absorptions of I are observed around 360 and 290 nm in the electronic spectra, and the far‐IR spectrum exhibits three characteristic vibrations of I unit at 156, 112, and 69 cm^?1 assigned to ν_as(I‐I), ν_s(I‐I), and δ(I), respectively. The activation parameters (ΔG^#, ΔS^#, and ΔH^#) were obtained from the temperature dependence of the rate constants. The influence of relative permittivity of the medium on the rate indicated that the intermediate is more polar than the reactants, and this observation was further well supported by spectral studies. Based on the spectrokinetic results, plausible mechanisms for the interaction of the drug with the chosen acceptors, which proceed via the formation of CT complexes and its transformation into final products, have been proposed. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 787–799, 2009     

Theoretical study of the gas‐phase SN2 reactions of X− with CH3OY (X,Y = Cl,Br, I)

The gas‐phase nucleophilic substitution reactions at saturated oxygen X^? + CH₃OY (X, Y = Cl, Br, I) have been investigated at the level of CCSD(T)/6‐311+G(2df,p)//B3LYP/6‐311+G(2df,p). The calculated results indicate that X^? preferably attacks oxygen atom of CH₃OY via a S_N2 pathway. The central barriers and overall barriers are respectively in good agreement with both the predictions of Marcus equation and its modification, respectively. Central barrier heights (ΔH and ΔH) correlate well with the charges (Q) of the leaving groups (Y), Wiberg bond orders (BO) and the elongation of the bonds (O? Y and O? X) in the transition structures. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Laser ablation of AgSbS2 and cluster analysis by time‐of‐flight mass spectrometry

Thin films of AgSbS₂ are important for phase‐change memory applications. This solid is deposited by various techniques, such as metal organic chemical vapour deposition or laser ablation deposition, and the structure of AgSbS₂(s), as either amorphous or crystalline, is already well characterized. The pulsed laser ablation deposition (PLD) of solid AgSbS₂ is also used as a manufacturing process. However, the processes in plasma have not been well studied. We have studied the laser ablation of synthesized AgSbS₂(s) using a nitrogen laser of 337 nm and the clusters formed in the laser plume were identified. The ablation leads to the formation of various single charged ternary Ag_pSb_qS_r clusters. Negatively charged AgSbS, AgSb₂S, AgSb₂S, AgSb₂S and positively charged ternary AgSbS⁺, AgSb₂S⁺, AgSb₂S, AgSb₂S clusters were identified. The formation of several singly charged Ag⁺, Ag, Ag, Sb, Sb, S ions and binary Ag_pS_r clusters such as AgSb, Ag₃S^?, SbS (r = 1–5), Sb₂S^?, Sb₂S, Sb₃S (r = 1–4) and AgS, SbS⁺, SbS, Sb₂S⁺, Sb₂S, Sb₃S (r = 1–4), AgSb was also observed. The stoichiometry of the clusters was determined via isotopic envelope analysis and computer modeling. The relation of the composition of the clusters to the crystal structure of AgSbS₂ is discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Ab initioMO calculations for the oxides,oxyacids, and oxyanions of S(IV) and S(VI)

Ab initio molecular orbital (MO ) calculations for two series of sulfur–oxygen compounds are reported: the S(IV ) system of SO₂, H₂SO₃, HSO, and SO, and the S(VI ) system of SO₃, H₂SO₄, HSO, and SO. Geometries about the sulfur atoms were optimized using the STO -3G* basis set; energies at these geometries were computed by the STO ?3G and 44-31G basis sets both with and without five Gaussian d orbitals on S. The sulfur–oxygen bond lengths and the angles about the central atoms agree fairly well with experiment. The stabilization energy associated with the addition of the d orbitals was found to be a constant amount per bond (ca. 54 and 28 kcal mole^?1 in the minimal and extended bases, respectively) in hypervalent compounds. The isomer HSO was predicted to be more stable than SO₂(OH)^?, but the reverse was true for HSO₂(OH) compared to SO(OH)₂. The deprotonation energies for the acids and the hydration energies for the oxides also were computed and discussed with reference to experimental data.     

Bridging gold: B‐Au‐B three‐center‐two‐electron bonds in electron‐deficient B2Aun−/0 (n = 1, 3, 5) and mixed analogues

A systematic density functional theory and wave function theory investigation on the geometrical and electronic structures of the electron‐deficient diboron aurides B₂Au (n = 1, 3, 5) and their mixed analogues B₂H_mAu (m + n = 3, 5) has been performed in this work. Ab initio theoretical evidences strongly suggest that bridging gold atoms exist in the ground states of C_2v B₂Au^?(¹A₁), C₂ B₂Au(¹A), C_2v B₂Au₃(²B₁), C_2v B₂Au(¹A₁), and C_s B₂Au₅(²A″), which all prove to possess a B? Au? B three‐center‐two‐electron (3c‐2e) bond. For B₂H_mAu (m + n = 3, 5) mixed anions, bridging B? Au? B units appear to be favored in energy over bridging B? H? B, as demonstrated by the fact that the Au‐bridged C_2v B₂H₂Au^? (¹A₁), C_s B₂HAu (¹A′), and C₁ B₂HAu (¹A) lie clearly lower than their H‐bridged counterparts C_s B₂H₂Au^? (¹A′), C₂ B₂HAu (¹A), and C_2v B₂HAu (¹A₁), respectively. Orbital analyses indicate that Au 6s makes about 92–96% contribution to the Au‐based orbitals in these B‐Au‐B 3c‐2e interactions, whereas Au 5d contributes 8–4%. The adiabatic and vertical detachment energies of the concerned anions have been calculated to facilitate their future experimental characterizations. The results obtained in this work establish an interesting 3c‐2e bonding model (B? Au? B) for electron‐deficient systems in which Au 6s plays a major role with non‐negligible contribution from Au 5d. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011