Polyimide–silica hybrid coatings: morphological,mechanical, and thermal investigations

In this study, polyimide–silica (PI–silica) based hybrid coating compositions were prepared from tetraethoxysilane (TEOS), γ‐glycidyloxypropyl trimethoxy silane (GOTMS), and polyamic acid (PAA) via a combination of sol–gel and thermal imidization techniques. PAA was synthesized from 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) and 3,3'‐Diaminodiphenyl sulfone (DDS) in N‐Methyl‐2‐pyrrolidone (NMP). The silica content in the hybrid coatings was varied from 0 to 20 wt%. The structural characterization of the hybrid coatings was performed using FTIR and ²⁹Si‐NMR spectroscopies. Results from both pendulum hardness and micro indentation test show that the hardness of hybrid coatings improves with the increase in silica content. The tensile tests also demonstrated that the mechanical properties at low silica content are rather striking. Their surface morphologies were characterized by scanning electron microscopy (SEM). SEM studies revealed that inorganic particles were distributed homogenously through the PI matrix. It was also found that, incorporation of the silica domains increased the thermal stability of the hybrid coatings. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis,dielectric, and microwave absorption properties of flake carbonyl iron particles coated with nanostructure polymer

Flake carbonyl iron particles (FCIPs) coated with nanostructure polymer (meth‐acrylic acid‐polystyrene, MAA‐PS) were synthesized by dispersion polymerization using poly (vinylpyrrolidone) as stabilizer and 2, 2‐azobis (isobutyronirile) as a catalytic agent. Field emission scanning electron microscope equipped with energy dispersive x‐ray spectroscopy and high‐resolution transmission electron microscope was used to observe its morphology of FCIPs‐MAA‐PS, and thermo‐gravimetric analyses were employed to characterize its mass loss of polymer surface modification. Electromagnetic properties of FCIPs before and after coating were investigated by Agilent 8720ET vector network analyzer within 0.5–18 GHz. After coated with nanostructure polymer, the real part of permittivity for FCIPs/wax composite was decreased while its permeability remained nearly unchanged. Dielectric behaviors were discussed by the Cole–Cole dispersion formula. After surface modification with nanostructure polymer, reflection loss of FCIPs‐MAA‐PS/wax composite presented a wide absorption band and showed the minimum value of reflection loss reaching ?39.4 dB when the thickness was 2.50 mm. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermodynamics of adsorption of polybutadiene on alumina and silica gel: effect of temperature and solvent

The adsorption of polybutadiene (PBR) on alumina and silica gel was studied at different temperatures from cyclohexane and toluene solutions. It shows that the adsorption process was dependent on temperature and solvent. The adsorption isotherm and the thermodynamic quantities of adsorption were determined and it was observed that the adsorption process from both solvents was similar and the amount of adsorption increased as temperature decreased. The silica gel-cyclohexane system was more exothermic than all other systems and was also relatively more ordered.     

Effects of methyl methacrylate grafting and in situ silica particle formation on the morphology and mechanical properties of natural rubber composite films

The effects of methyl methacrylate (MMA) grafting and in situ formation of silica particles on the morphology and mechanical properties of natural rubber latex (NRL) were investigated. MMA grafting on NRL was carried out using cumyl hydroxy peroxide/tetraethylene pentamine (CHPO/TEPA) as a redox initiator couple. The grafting efficiency of the grafted NR was determined by solvent extractions and the grafted NRL was then mixed with tetraethoxysilane (TEOS), a precursor of silica, coated by adherence to a glass surface to form a film and cured at 80°C. The resultant products were characterized by FT‐IR and transmission electron microscopy. The influence of varying the MMA monomer weight ratio on the surface morphology of the composites was investigated by scanning electron and atomic force microscopy. The PMMA (poly MMA) grafted NRL particles were obtained as a core/shell structure from which the NR particles were the core seed and PMMA was a shell layer. The silane was converted into silica particles by a sol–gel process which was induced during film drying at 80°C. The silica particles were fairly evenly distributed in the ungrafted NR matrix but were agglomerated in the grafted NR matrix. The root‐mean‐square roughness increased with an increasing weight ratio of MMA in the rubber. The in situ silica particles in the grafted NR matrix slightly increased both the modulus and the tear strength of the composite film. Copyright © 2008 John Wiley & Sons, Ltd.     

Chemiluminescence during decomposition of 1,4-dimethylnaphthalene endoperoxide on the silica gel and alumina surface

Decomposition of 1,4-dimethylnaphthalene endoperoxide supported on the silica gel and alumina surface is accompanied by chemiluminescence (CL) in the IR and visible spectral regions. The CL emitter in the IR region is singlet oxygen. The ¹O₂ dimol contributes mainly to the emission at λ_max = 630 and 700 nm. It was shown by the IR-CL method that endoperoxide decomposition on the sorbent surface follows the first-order kinetics. The activation parameters of the process were determined. On the Al₂O₃ and silica gel surfaces a substantial acceleration of the decomposition of 1,4-dimethylnaphthalene endoperoxide is observed compared to the solution. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 199–204, February, 2007.     

The alkoxide sol–gel process in the calcium phosphate system and its applications†

A single calcium glycolate was synthesized. The alkoxide was stable under ambient atmosphere. The calcium glycolate, phosphoric acid and P(OH) _x (OEt)_{3− x} were used as the precursors. Acetic acid was used as a reagent to modify the calcium glycolate and to change the acidity of the mixtures of the precursors. Mixtures of the calcium glycolate and phosphoric acid in a Ca/P ratio of 1.67 showed unusual sol–gel behavior. A transparent gel could be formed depending on the content of acetic acid and the extent of stirring. The behavior is attributed to a high viscosity and a large molecular size of the ethylene glycol solvent, leading to a strong dependence of the reactions in the mixtures on the diffusion process, greatly affected by stirring. When the mixtures of the calcium glycolate and PO(OH) _x (OEt) _{3− x} contained acetic acid at an acetic acid/Ca ratio of 3, stable alkoxide solutions with Ca/P ratios of 1.0, 1.5 and 1.67 could be formed. Different calcium phosphate compounds and hydroxyapatite coatings on alumina substrates could easily be formed from the alkoxide solutions. The chemical homogeneity provided by the alkoxide route leads to easy formation of the required products. Copyright © 1999 John Wiley & Sons, Ltd.     

Organic–inorganic hybrid materials. I. Characterization and degradation of poly(imide–silica) hybrids

Poly(imide–silica) hybrid materials with covalent bonds were prepared by (3-aminopropyl)methyldiethoxysilane (APrMDEOS) terminated amic acid, water, and tetramethoxysilane (TMOS) via a sol–gel technique. Infrared (IR), ²⁹Si and ¹³C CP/MAS nuclear magnetic resonance (NMR) spectroscopy, and thermogravimetric analysis (TGA) were used to study hybrids containing various proportions of TMOS and hydrolysis ratios. The microstructure and chain mobility of hybrids were investigated by proton spin–spin relaxation T₂ measurements. The apparent activation energy E_a for degradation of hybrids in air was studied by the van Krevelen method. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2275–2284, 1999     

Ionic liquid‐based organic–inorganic hybrid electrolytes: Impact of in situ obtained and dispersed silica

Organic–inorganic hybrid electrolytes based on PEO‐NaTFSI‐ionic liquid (HMIMTFSI)‐silica (in situ production via sol gel process) are being reported in this article. The variation in conductivity with ionic liquid (IL) addition has been explained on the basis of number of free TFSI anions evaluated using ATR‐IR data. The deconvolution of the IR spectra of these hybrid electrolytes has given evidence of ion‐pair formation which has been compared vis‐á‐vis the conductivity variation. The hybrid electrolyte with maximum conductivity comprises the highest number of free imide ions and has lowest glass transition temperature. FESEM has displayed a porous and layered surface morphology with dispersed silica nanoparticles. In addition, the optimized hybrid electrolyte has been compared with 5 wt% (limit of mechanical stability) ex situ silica added composite where the temperature cycling of conductivity has shown that the ex situ dispersed hybrid electrolytes do not retrace their conductivity path contrary to the in situ prepared hybrid electrolytes. This behavior has been explained to be due to the hindrance offered by the ex situ added silica in the recrystallization kinetics of PEO. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 207–218     

Preparation and separation properties of oxalylurea‐bridged silica membranes

Two new bridged alkoxysilanes, bis(triethoxysilylalkyl)‐N,N′‐oxalylureas (alkyl = methyl or n‐propyl), bearing a highly rigid and polar oxalylurea unit in the bridges, were employed as precursors of bridged silica membranes. The gas and water separation performance of the membranes prepared from the precursors using the sol–gel process was investigated. Interestingly, the membrane properties depended on the alkyl chain length. The membrane containing methylene units (alkyl = methyl) was porous and rather hydrophilic but the other with longer propylene units (alkyl = n‐propyl) was non‐porous and more hydrophobic. High H₂/SF₆ gas permeance ratios of 3100 and 1700, and NaCl rejections of 89 and 85% for 2000 ppm aqueous NaCl were obtained using the membranes containing methyl and n‐propyl, respectively. The membrane with alkyl = methyl also showed a high CO₂/N₂ permeance ratio of 20.6 at 50°C. These results indicate the potential applications of the membranes as gas and water separation materials. Copyright © 2015 John Wiley & Sons, Ltd.     

Phase structure and thermomechanical properties of primary and tertiary amine‐cured epoxy/silica hybrids

Several kinds of organic–inorganic hybrids were synthesized from an epoxy resin and a silane alkoxide with a primary amine‐type curing agent or tertiary amine curing catalyst. In the hybrid systems cured with the primary amine‐type curing agent, the storage modulus in the high‐temperature region increased, and the peak area of the tan δ curve decreased. Moreover, the mechanical properties were improved by the hybridization of small amounts of the silica network. However, these phenomena were not observed in the hybrid systems cured with the tertiary amine catalyst. The differences in the network structures of the hybrid materials with the different curing processes were characterized with Fourier transform infrared (FTIR). In the hybrid systems cured with the primary amine‐type curing agent, FTIR results showed the formation of a covalent bond between silanol and hydroxyl groups that were generated by the reaction of an epoxy group with an active hydrogen of the primary amine. However, this phenomenon was not observed in the hybrids cured with the tertiary amine. The hybrids with the primary amine showed a homogeneous microstructure in transmission electron microscopy observations, although the hybrids cured with the tertiary amine showed a heterogeneous structure. These results mean that the differences in the interactions between the organic and inorganic phases significantly affect the properties and microstructures of the resultant composites. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1071–1084, 2001     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Synthesis,structure, and morphology of polymer–silica hybrid nanocomposites based on hydroxyethyl methacrylate

Two types of polymer–silica nanocomposites have been prepared by undergoing free radical polymerization of 2-hydroxyethyl methacrylate (HEMA) either in the presence of HEMA-functionalized SiO₂ nanoparticles (Type 1) or during the simultaneous in situ growing of the silica phase through the acid-catalyzed sol–gel polymerization of tetraethoxysilane (TEOS) (Type 2). Relationships between synthesis conditions, chemical structure, and resulting morphology have been studied. Type 1 systems exhibit a classical particle-matrix morphology, but where particles tend to form aggregates. Type 2 systems possess a finer morphology characterized by a very open mass-fractal silicate structure, which is believed to be bicontinuous with the organic phase at a molecular level. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3172–3187, 1999     

The evolution of growth morphology and corrosion behavior of electrodeposited Ni–P coatings on alumina borate whisker‐reinforced pure aluminum composite

The Ni–P alloy coatings were obtained on alumina borate whisker‐reinforced pure aluminum composite by electro‐deposition. The initial electro‐deposition behavior of the Ni–P alloys on the composite and pure aluminum was studied, respectively. It was found that the composition and the morphology of materials had a distinct effect on the initial electro‐deposition behavior of the Ni–P alloys. The Ni–P alloy coatings preferred to nucleate at the composite as compared with the pure aluminum. Moreover, the Ni–P particles were prone to deposit at the whisker/Al interface in the composite. The Ni–P coatings were barely depositing upon the surface of whisker during the plating process. As the deposition time increased, the Ni–P particles that were deposited on the surface of the composite grew gradually. These Ni–P particles linked to each other and eventually covered the whisker surface. Moreover, it can be found that the surfaces of the composite were gradually covered by Ni–P coatings and the anticorrosion performance of the coated composite increased remarkably with the increase in the deposition time. When the deposition time is 60 min, only the Ni–P diffraction peak could be detected. In this case, the coated composite had significantly better corrosion resistant, which is attributed to the surface of composite was perfectly covered by the Ni–P coatings. Copyright © 2012 John Wiley & Sons, Ltd.     

Pentacyanoferrates(II) on the surface of organomodified silica gel: The matrix effect

Pentacyanoferrate(II) absorbed on a silica gel surface previously modified with 3-aminopropyl and 3-imidazolylpropyl groups were characterized by¹³C MAS/NMR, FT-IR, Mössbauer spectroscopy, and cyclic voltammetry. FT-IR and¹³C MAS/NMR data indicated that the pentacyanoferrate(II) complex is bonded to the surface by the nitrogen atom of the functional group. The differences in the isomeric shifts, the quandrupole splittings and the midpoint potentials of the adsorbed complexes in comparison with the model complexes were attributed to the matrix polar effect—i.e., the interaction of the complex with polar groups on the silica surface.     

Biomimetic Synthesis of Shaped and Chiral Silica Entities Templated by Organic Objective Materials

Organic molecules with accompanying self‐organization have been a great subject in chemistry, material science and nanotechnology in the past two decades. One of the most important roles of organized organic molecules is the capability of templating complexly structured inorganic materials. The focus of this Minireview is on nanostructured silica with divergent morphologies and/or integrated chirality directed by organic templates of self‐assembled polyamine/polypeptides/block copolymers, chiral organogels, self‐organized chiral amphiphiles and chiral crystalline complexes, etc., by biomimetic silicification and conventional sol–gel reaction. Among them, biosilica (diatoms and sponges)‐inspired biomimetic silicifications are particularly highlighted.     

Dependence of silica particle sizes on network chain lengths,silica contents,and catalyst concentrations in in situ‐reinforced polysiloxane elastomers

Poly(dimethylsiloxane) networks were prepared by tetrafunctionally end‐linking hydroxyl‐terminated chains with tetraethoxysilane (TEOS). Molecular composites were then prepared by in situ sol–gel reactions on additional TEOS swelled into the networks, resulting in the formation of reinforcing silica fillers within the host elastomers. The amount of filler generated generally increased linearly with an increase in the TEOS swelling ratio, as expected. The silica particles formed were examined by small‐angle X‐ray scattering. Of particular interest were the relationships between particle size and molecular weight M_c of the network chains (mesh sizes), amount of filler introduced, and catalyst concentration. Particle sizes were smallest for the smallest values of M_c, possibly demonstrating constraining effects from the very short network chains. At fixed M_c and filler concentrations, higher catalyst concentrations gave larger particles. Increase in filler concentration generally had little effect on particle size at low and high loadings, but markedly increased sizes at intermediate levels (10–20 wt %), presumably caused by coalescence of the scattering entities into considerably larger aggregates. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1421–1427, 1999     

The maleimide modified epoxy resins for the preparation of UV‐curable hybrid coatings

In the present study, maleimide‐modified epoxide resin containing UV‐curable hybrid coating materials were prepared and coated on polycarbonate substrates in order to improve their surface properties. UV‐curable, bismaleimide‐modified aliphatic epoxy resin was prepared from N‐(p‐carboxyphenyl) maleimide (p‐CPMI) and cycloaliphatic epoxy (Cyracure‐6107) resin. The structure of the bismaleimide modified aliphatic epoxy resin was analyzed by FTIR and the characteristic absorption band for maleimide ring was clearly observed at 3100 cm^?1. Silica sol was prepared from tetraethylorthosilicate (TEOS) and methacryloxy propyl trimethoxysilane (MAPTMS) by sol–gel method. The coating formulations with different compositions were prepared from UV‐curable bismaleimide‐based epoxy oligomer and sol–gel mixture. The molecular structure of the hybrid coating material was analyzed by ²⁹Si‐CP/MAS NMR spectroscopy techniques. In the ²⁹Si CP/MAS NMR spectrum of the hybrid coating, mainly two kinds of signals were observed at ?68 and ?110 ppm that correspond to T³ and Q⁴ peaks, respectively. This result shows that a fully condensed structure was obtained. The thermal and morphological properties of these coatings materials were investigated by using TGA and SEM techniques. Hardness and abrasion resistance properties of coating materials were examined and both were found to increase with sol–gel precursor content of the coating. The photopolymerization kinetics was investigated by using RT‐IR. 70% conversion was attained with the addition of 15 wt% of BMI resin into the acrylate‐based coating formulation. It was found that the UV‐curable organic–inorganic hybrid coatings improved the surface properties of polycarbonate. Copyright © 2009 John Wiley & Sons, Ltd.     

Polymeric siloxanes with a substituent and the spirobenzopyran moiety: Effect of polar substituent on the photochromic properties

Oligomeric polysiloxanes having the spirobenzopyran moiety and various substituents were prepared. The polymers were photochromic; the color changed from colorless to red on UV irradiation and the color faded on visible irradiation or on standing in the dark. The thermal decoloration was depressed by the polar substituents. However, the effect of the bulky substituent, which had been observed in the rigid siloxane resins, was not detected. In the inorganic/organic hybrid siloxane gels, the silica/(spirobenzopyran-bonding polysiloxane) system and the (spirobenzopyran-bonding silica)/polysiloxane system, the thermal decoloration was also affected by the polar substituent introduced into the polysiloxane portion. The effect was larger in the first case than in the second. The result can be interpreted by the term of the preferential diffusion of polar spirobenzopyran to the vicinity of the polar substituents during the gelation.     

Influence of Ga dopant on photoelectrochemical characteristic of Ga‐doped ZnO thin films deposited by sol–gel spin‐coating technique

In this study, Ga‐doped ZnO thin films were prepared using sol–gel technique via spin‐coating method. The effect of Ga‐doping dopant (0, 1, 2 and 3 at.%) on microstructural, optical, electrical and photoelectrochemical (PEC) characteristics have been investigated. The spin‐coating was repeated six times, and as‐obtained thin films were then annealed at 500 °C for 1 h in vacuum. After annealing, all samples revealed single phase of hexagonal ZnO polycrystalline structure with a main peak of (002) in X‐ray diffraction (XRD) pattern. Raman spectra show that the vibration strength of E₂ is highly decreased by Ga doping. Thicknesses of all samples were ~300 nm measured via scanning electron microscopy (SEM) cross‐section images and alpha‐step. The optical band gap and resistivity of samples were in the range of 3.24 to 3.28 eV and 102 to 9 Ohm cm, respectively. Resulting from PEC response, the 2 at.% Ga‐doped ZnO thin film has a better PEC performance with photocurrent density of ~0.14 mA/cm² at 0.5 V versus saturated calomel electrode (SCE) under illumination with the intensity of 100 mW/cm². This value was about seven times higher than the un‐doped film (reference sample). Observed higher photocurrent density was likely because of a suitable Ga‐doping concentration causing a lower resistivity. Copyright © 2016 John Wiley & Sons, Ltd.