Food contaminant analysis at ultra‐high mass resolution: application of hybrid linear ion trap – orbitrap mass spectrometry for the determination of the polyether toxins,azaspiracids, in shellfish

The biotoxins, azaspiracids (AZAs), from marine phytoplankton accumulate in shellfish and affect human health by causing severe gastrointestinal disturbance, diarrhea, nausea and vomiting. Specific and sensitive methods have been developed and validated for the determination of the most commonly occurring azaspiracid analogs. An LTQ Orbitrap mass spectrometer is a hybrid instrument that combines linear ion trap (LIT) mass spectrometry (MS) with high‐resolution Fourier transform (FT) MS and this was exploited to perform simultaneous ultra‐high‐resolution full‐scan MS analysis and collision‐induced dissociation (CID) tandem mass spectrometry (MS/MS). Using the highest mass resolution setting (100 000 FWHM) in full‐scan mode, the methodology was validated for the determination of six AZAs in mussel (Mytilus galloprovincialis) tissue extracts. Ultra‐high mass resolution, together with a narrow mass tolerance window of ±2 mDa, dramatically improved detection sensitivity. In addition to employing chromatographic resolution to distinguish between the isomeric azaspiracid analogs, AZA1/AZA6 and AZA4/AZA5, higher energy collisionally induced dissociation (HCD) fragmentation on selected precursor ions were performed in parallel with full‐scan FTMS. Using HCD MS/MS, most precursor and product ion masses were determined within 1 ppm of the theoretical m/z values throughout the mass spectral range and this enhanced the reliability of analyte identity. For the analysis of mussels (M. galloprovincialis), the method limit of quantitation (LOQ) was 0.010 µg/g using full‐scan FTMS and this was comparable with the LOQ (0.007 µg/g) using CID MS/MS. The repeatability data were; intra‐day RSD% (1.8–4.4%; n = 6) and inter‐day RSD% (4.7–8.6%; n = 3). Application of these methods to the analysis of mussels (M. edulis) that were naturally contaminated with azaspiracids, using high‐resolution full‐scan Orbitrap MS and low‐resolution CID MS/MS, produced equivalent quantitative data. Copyright © 2010 John Wiley & Sons, Ltd.     

Investigation of space charge effects and ion trapping capacity on direct introduction ultra‐high‐resolution mass spectrometry workflows for metabolomics

Ultra‐high‐resolution mass spectrometry, in the absence of chromatography, is finding its place for direct analyses of highly complex mixtures, such as those encountered during untargeted metabolomics screening. Advances, however, have been tempered by difficulties such as uneven signal suppression experienced during electrospray ionization. Moreover, ultra‐high‐resolution mass spectrometers that use Orbitrap and ICR analyzers both suffer from limited ion trapping capacities, owing principally to space‐charge effects. This study has evaluated and contrasted the above two types of Fourier transform mass spectrometers for their abilities to detect and identify by accurate mass measurement, small molecule metabolites present in complex mixtures. For these direct introduction studies, the Orbitrap Fusion showed a major advantage in terms of speed of analysis, enabling detection of 218 of 440 molecules (<2 ppm error, 500 000 resolution at m/z 200) present in a complex mixture in 5 min. This approach is the most viable for high‐throughput workflows, such as those used in investigations involving very large cohorts of metabolomics samples. From the same mixture, 183 unique molecules were observed by FT‐ICR in the broadband mode, but this number was raised to 235 when “selected ion monitoring‐stitching” (SIM‐stitching) was employed (<0.1 ppm error, 7 T magnet with dynamic harmonization cell, 1.8 million resolution at m/z 200, both cases). SIM‐stitching FT‐ICR thus offered the most complete detection, which may be of paramount importance in situations where it is essential to obtain the most complete metabolic profile possible. This added completeness, however, came at the cost of a more lengthy analysis time (120 min including manual treatment). Compared to the data presented here, future automation of processing, plus the use of absorption mode detection, segmented ion detection (stepwise detection of smaller width m/z sections), and higher magnetic field strengths, can substantially reduce FT‐ICR acquisition times.     

Desorption electrospray ionization ‐ orbitrap mass spectrometry of synthetic polymers and copolymers

Desorption ElectroSpray Ionization (DESI) ‐ Orbitrap Mass Spectrometry (MS) was evaluated as a new tool for the characterization of various industrial synthetic polymers (poly(ethylene glycol), poly(propylene glycol), poly(methylmethacrylate), poly(dimethylsiloxane)) and copolymers, with masses ranging from 500 g.mol⁻¹ up to more than 20 000 g.mol⁻¹. Satisfying results in terms of signal stability and sensitivity were obtained from hydrophobic surfaces (HTC Prosolia) with a mixture water/methanol (10/90) as spray solvent in the presence of sodium salt. Taking into account the formation of multiplied charged species by DESI‐MS, a strategy based on the use of a deconvolution software followed by the automatic assignment of the ions was described allowing the rapid determination of M_n, M_w and PDI values. DESI‐Orbitrap MS results were compared to those obtained from matrix‐assisted laser desorption/ionization‐ time‐of‐flight MS and gel permeation chromatography. An application of DESI‐Orbitrap MS for the detection and identification of polymers directly from cosmetics was described. Copyright © 2012 John Wiley & Sons, Ltd.     

Software tool for mining liquid chromatography/multi‐stage mass spectrometry data for comprehensive glycerophospholipid profiling

Electrospray ionization mass spectrometry (ESI‐MS) has emerged as an indispensable tool in the field of lipidomics. Despite the growing interest in lipid analysis, there are only a few software tools available for data evaluation, as compared for example to proteomics applications. This makes comprehensive lipid analysis a complex challenge. Thus, a computational tool for harnessing the raw data from liquid chromatography/mass spectrometry (LC/MS) experiments was developed in this study and is available from the authors on request. The Profiler‐Merger‐Viewer tool is a software package for automatic processing of raw‐data from data‐dependent experiments, measured by high‐performance liquid chromatography hyphenated to electrospray ionization hybrid linear ion trap Fourier transform mass spectrometry (FTICR‐MS and Orbitrap) in single and multi‐stage mode. The software contains three parts: processing of the raw data by Profiler for lipid identification, summarizing of replicate measurements by Merger and visualization of all relevant data (chromatograms as well as mass spectra) for validation of the results by Viewer. The tool is easily accessible, since it is implemented in Java and uses Microsoft Excel (XLS) as output format. The motivation was to develop a tool which supports and accelerates the manual data evaluation (identification and relative quantification) significantly but does not make a complete data analysis within a black‐box system. The software's mode of operation, usage and options will be demonstrated on the basis of a lipid extract of baker's yeast (S. cerevisiae). In this study, we focused on three important representatives of lipids: glycerophospholipids, lyso‐glycerophospholipids and free fatty acids. Copyright © 2010 John Wiley & Sons, Ltd.     

Application of high‐resolution ESI and MALDI mass spectrometry to metabolite profiling of small interfering RNA duplex

We investigated the application of a high‐resolution Orbitrap mass spectrometer equipped with an electrospray ionization (ESI) source and a matrix‐assisted laser desorption/ionization‐time‐of‐flight (MALDI‐TOF) mass spectrometer to the metabolite profiling of a model small interfering RNA (siRNA) duplex TSR#34 and compared their functions and capabilities. TSR#34 duplex was incubated in human serum in vitro, and the duplex and its metabolites were then purified by ion exchange chromatography in order to remove the biological matrices. The fraction containing the siRNA duplex and its metabolites was collected and desalted and then subjected to high‐performance liquid chromatography (HPLC) equipped with a reversed phase column. The siRNA and its metabolites were separated into single strands by elevated chromatographic temperature and analyzed using the ESI‐Orbitrap or the MALDI‐TOF mass spectrometer. Using this method, the 5' and/or 3' truncated metabolites of each strand were detected in the human serum samples. The ESI‐Orbitrap mass spectrometer enabled differentiation between two possible RNA‐based sequences, a monoisotopic molecular mass difference which was less than 2 Da, with an intrinsic mass resolving power. In‐source decay (ISD) analysis using a MALDI‐TOF mass spectrometer allowed the sequencing of the RNA metabolite with characteristic fragment ions, using 2,4‐dihydroxyacetophenone (2,4‐DHAP) as a matrix. The ESI‐Orbitrap mass spectrometer provided the highest mass accuracy and the benefit of on‐line coupling with HPLC for metabolite profiling. Meanwhile, the MALDI‐TOF mass spectrometer, in combination with 2,4‐DHAP, has the potential for the sequencing of RNA by ISD analysis. The combined use of these methods will be beneficial to characterize the metabolites of therapeutic siRNA compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Aquatic plant‐derived changes in oil sands naphthenic acid signatures determined by low‐, high‐ and ultrahigh‐resolution mass spectrometry

Mass spectrometry is a common tool for studying the fate of complex organic compound mixtures in oil sands processed water (OSPW), but a comparison of low‐, high‐ (～10 000), and ultrahigh‐resolution (～400 000) instrumentation for this purpose has not previously been made. High‐resolution quadrupole time‐of‐flight mass spectrometry (QTOF MS) and ultrahigh‐resolution Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR MS), with negative‐ion electrospray ionization, provided evidence for the selective dissipation of components in OSPW. Dissipation of oil sands naphthenic acids (NAs with general formula C_nH_2n+zO₂ where n is the number of carbon atoms, and Z is zero or a negative even number describing the number of rings) was masked (by components such as fatty acids, O₃, O₅, O₆, O₇, SO₂, SO₃, SO₄, SO₅, SO₆, and NO₄ species) at low resolution (1000) when using a triple quadrupole mass spectrometer. Changes observed in the relative composition of components in OSPW appear to be due primarily to the presence of plants, specifically cattails (Typha latifolia) and their associated microorganisms. The observed dissipation included a range of heteratomic species containing O₂, O₃, O₄, and O₅, present in Athabasca oil sands acid extracts. For the heteratomic O₂ species, namely naphthenic acids, an interesting structural relationship suggests that low and high carbon number NAs are dissipated by the plants preferentially, with a minimum around C₁₄/C₁₅. Other heteratomic species containing O₆, O₇, SO₂, SO₃, SO₄, SO₅, SO₆, and NO₄ appear to be relatively recalcitrant to the cattails and were not dissipated to the same extent in planted systems. Copyright © 2009 John Wiley & Sons, Ltd.     

1D Structure Sodium Coordination Anion based on [5‐(Dinitromethylene)‐4,5‐dihydro‐1H‐tetrazole]: Syntheses,Structures, and Thermal Behavior

The ten‐coordinate complex, (HATr)[Na(DNMz)] · H₂O ( 1 ) was synthesized by reaction of 5‐(dinitromethylene)‐4,5‐dihydro‐1H‐tetrazole (DNMz), sodium hydroxide, and 3‐hydrazinium‐4‐amino‐1,2,4‐1H‐triazolium dichloride (HATr) in aqueous solution and characterized by various physico‐chemical techniques. Complex 1 is an energetic material with a nitrogen content of 51.2 % and a decomposition temperature of 128.9 °C. The molecular structure of complex 1 crystallizes in the monoclinic system with P2(1)/c group and shows an infinite 1D chain structure. The heat of formation was determined as –122.27 kJ · mol^–1 by using bomb calorimetry. In addition, the kinetic parameters were studied by Kissinger's and Ozawa‐Doyle's methods.     

Characterization of wet‐etched GaAs (100) surfaces

To enable the use of GaAs‐based devices as chemical sensors, their surfaces must be chemically modified. Reproducible adsorption of molecules in the liquid phase on the GaAs surfaces requires controlled etching procedures. Several analytical methods were applied, including Fourier transform infrared spectroscopy (FTIRS) in attenuated total reflection and multiple internal reflection mode (ATR/MIR), high‐resolution electron energy loss spectroscopy (HREELS), X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) for the analysis of GaAs (100) samples treated with different wet‐etching procedures. The assignment of the different features due to surface oxides present in the vibrational and XPS spectra was made by comparison with those of powdered oxides (Ga₂O₃, As₂O₃ and As₂O₅). The etching procedures here described, namely, those using low concentration HF solutions, substantially decrease the amount of arsenic oxides and aliphatic contaminants present in the GaAs (100) surfaces and completely remove gallium oxides. The mean thickness of the surface oxide layer drops from 1.6 nm in the raw sample to 0.1 nm after etching. However, in presence of light, water dissolution of arsenic oxides is enhanced, and oxidized species of gallium cover the surface. Copyright © 2005 John Wiley & Sons, Ltd.     

Ion tree‐based structure elucidation of acetophenone dimers (AtA) from Acronychia pedunculata and their identification in extracts by liquid chromatography electrospray ionization LTQ‐Orbitrap mass spectrometry

Acronychia‐type acetophenones (AtA) is a chemical group of compounds of important structural and biological interest, abundant in Acronychia species. However, there are no data available for their characterization using mass spectrometry. In the current work, AtA have been investigated by multistage high resolution mass spectrometry and both electrospray ionization and atmospheric pressure chemical ionization, in positive and negative mode, were utilized for their structure elucidation and identification. The analysis of AtA using a linear ion trap‐Orbitrap analyzer enabled the structural determination of key fragment ions and cleavages, which can be used for the structural characterization thereof. A systematic nomenclature based on protonated and deprotonated fragment ions under collision‐induced dissociation conditions and decision trees for the structural determination of AtA are proposed. Furthermore, taking advantage of the characteristic fragmentation patterns, a selective Ultra High Performance Liquid Chromatography Electrospray Ionization multistage Mass Spectrometry (UHPLC‐ESI(‐)‐MSⁿ) method was developed and successfully applied for the dereplication of known AtA and the identification of potentially new ones in Acronychia extracts. Despite the structure similarity and the presence of isomers, accurate characterization of known and unknown AtA derivatives was possible. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel software for data analysis of Fourier transform ion cyclotron resonance mass spectra applied to natural organic matter

Natural organic matter (NOM) occurs as an extremely complex mixture of large, charged molecules that are formed by secondary synthesis reactions. Due to their nature, their full characterization is an important challenge to scientists specializing in NOM as well as analytical chemistry. Ultra‐high‐resolution Fourier transform ion cyclotron resonance mass spectrometry (FT‐ICR MS) analysis enables the identification of thousands of masses in a single measurement. A major challenge in the data analysis process of NOM using the FT‐ICR MS technique is the need to sort the entire data set and to present it in an accessible mode. Here we present a simple targeted algorithm called the David Mass Sort (DMS) algorithm which facilitates the detection and counting of consecutive series of masses correlated to any selected mass spacing. This program searches for specific mass differences among all of the masses in a single spectrum against all of the masses in the same spectrum. As a representative case, the current study focuses on the analysis of the well‐characterized Suwannee River humic and fulvic acid (SRHA and SRFA, respectively). By applying this algorithm, we were able to find and assess the amount of singly and doubly charged molecules. In addition we present the capabilities of the program to detect any series of consecutive masses correlated to specific mass spacing, e.g. COO, H₂, OCH₂ and O₂. Under several limitations, these mass spacings may be correlated to both chemical and biochemical changes which occur simultaneously during the formation and/or degradation of large mixtures of compounds. Copyright © 2010 John Wiley & Sons, Ltd.     

Quantitation of small molecules using high‐resolution accurate mass spectrometers – a different approach for analysis of biological samples

The quantitative capabilities of a linear ion trap high‐resolution mass spectrometer (LTQ‐Orbitrap™) were investigated using full scan mode bracketing the m/z range of the ions of interest and utilizing a mass resolution (mass/FWHM) of 15000. Extracted ion chromatograms using a mass window of ±5–10 mmu centering on the theoretical m/z of each analyte were generated and used for quantitation. The quantitative performance of the LTQ‐Orbitrap™ was compared with that of a triple quadrupole (API 4000) operating using selected reaction monitoring (SRM) detection. Comparable assay precision, accuracy, linearity and sensitivity were observed for both approaches. The concentrations of actual study samples from 15 Merck drug candidates reported by the two methods were statistically equivalent. Unlike SRM being a tandem mass spectrometric (MS/MS)‐based detection method, a high resolution mass spectrometer operated in full scan does not need MS/MS optimization. This approach not only provides quantitative results for compounds of interest, but also will afford data on other analytes present in the sample. An example of the identification of a major circulating metabolite for a preclinical development study is demonstrated. Copyright © 2009 John Wiley & Sons, Ltd.     

Identification and structural characterization of novel O‐ and N‐glycoforms in the urine of a Schindler disease patient by Orbitrap mass spectrometry

Schindler disease is an inherited metabolic disorder caused by the deficient activity of α‐N‐acetylgalactosaminidase enzyme. An accurate diagnosis requires, besides clinical examination, complex and costly biochemical and molecular genetic tests. In the last years, mass spectrometry (MS) based on nanofluidics and high‐resolution instruments has become a successful alternative for disease diagnosis based on the investigation of O‐glycopeptides in patient urine. A complex mixture of glycoforms extracted from the urine of a 3‐year‐old patient was investigated by Orbitrap MS equipped with Nanospray Flex Ion Source in the negative ion mode. For structural characterization of several molecular species, collision‐induced dissociation MS²–MS³ was carried out using collision energy values within 20–60 eV range. By our approach, 39 novel species associated to this condition were identified, among which O‐glycopeptides, free O‐glycans and one structure corresponding to an N‐glycan never characterized in the context of Schindler disease. The experiments conducted at a resolution of 60 000 allowed the discrimination and identification of a total number of 69 different species with an average mass accuracy of 9.87 ppm, an in‐run reproducibility of almost 100%, an experiment‐to‐experiment and day‐to‐day reproducibility of about 95%. This study brings contributions in the diagnosis of Schindler disease through the elucidation of potential biomarker species in urine. Our multistage MS results completed with 39 new glycoforms the inventory of potential biomarker structures associated to Schindler disease. For the first time, an N‐glycan was identified and structurally characterized in Schindler patient urine, which opens new research directions in the field. Copyright © 2015 John Wiley & Sons, Ltd.     

Structure elucidation of phototransformation products of unapproved analogs of the erectile dysfunction drug sildenafil in artificial freshwater with UPLC‐Q Exactive‐MS

In this study, four unapproved analogues of Sildenafil (SDF) were photodegraded under synthetic sunlight in artificial freshwater. Homosildenafil (H‐SDF), hydroxyhomo‐sildenafil (HH‐SDF), norneosildenafil (NR‐SDF) and thiosildenafil (T‐SDF) were selected because they are frequently detected as adulterants in natural herbal products. Using UPLC‐Orbitrap (Q Exactive)‐MS, six photoproducts common to H‐SDF, HH‐SDF and T‐SDF and nine unique transformation products of different molecular weights were identified based on their high‐resolution (+)ESI product ion spectra. Mass spectral analysis of deuterated H‐SDF, labeled on the N‐ethyl group, allowed to gain mechanistic insight into the fragmentation pathway of the substituted piperazine ring and to support the postulated photoproduct structures. The mass spectral fragmentation confirmed the stepwise destruction of the piperazine ring eventually producing a sulfonic acid derivative (C₁₇H₂₀N₄O₅S: 392.1151 Da). In contrast, the photodegradation of NR‐SDF, which lacks a piperazine ring in its structure, formed only two prominent photoproducts originating from N,N‐dealkylation of the sulfonamide followed by hydrolysis. The current work constitutes the first study on the photodegradation of analogs of erectile dysfunction drugs and the first detection of two transformation products (m/z 449 and 489) in environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Identification and determination of chemical constituents of Citrus reticulata semen through ultra high performance liquid chromatography combined with Q Exactive Orbitrap tandem mass spectrometry

Citrus reticulata semen, a traditional Chinese medicinal material, has desirable medicinal and dietary properties. In this study, a method combining ultra high performance liquid chromatography with Q Exactive Orbitrap tandem mass spectrometry was established and validated for the identification and analysis of the chemical components of C. reticulata semen for the first time. The evaluation of different retention times and fragmentation characteristics, as well as comparative analysis with the literature, resulted in the identification of 35 chemical constituents, including 21 flavonoids and 14 other compounds. The 21 flavonoids derived from C. reticulata semen were reported for the first time. Seven of the chemical components of C. reticulata semen were quantitatively analyzed using the developed method under the optimal conditions. The results showed that the content of limonin, hesperidin, nobiletin, synephrine, tangeretin, 3,5,6,7,8,3′,4′‐heptamethoxyflavone and 5‐hydroxide‐6,7,8,3′,4′‐pentamethoxyflavone in C. reticulata semen was 11.1666, 0.0404, 0.0092, 0.0255, 0.0087, 0.0010, and 0.0008 mg/g, respectively. This study demonstrated that the ultra high performance liquid chromatography Q Exactive Orbitrap mass spectrometry based method can be used to rapidly and reliably analyze the chemical constituents of C. reticulata semen. These results provide a scientific basis for further studies of C. reticulata semen.     

Combined utilization of ion mobility and ultra‐high‐resolution mass spectrometry to identify multiply charged constituents in natural organic matter

Natural organic matter as complex biogeochemical non‐repetitive material was investigated with ion mobility mass spectrometry (IMS) and ultra‐high‐resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR‐MS) approaches in order to unravel the existence of multiply charged state constituents. Hereby we describe and assign the potential molecular formulae of these doubly charged species, derived from FTICR‐MS, and the existence of these species was confirmed via IMS. The parallel application of these powerful techniques enabled the boundaries of the understanding of natural organic matter to be pushed further. Copyright © 2009 John Wiley & Sons, Ltd.     

MALDI produced ions inspected with a linear ion trap-orbitrap hybrid mass analyzer

A MALDI source is interfaced to a modified LTQ Orbitrap XL instrument. This work gives insight into the MALDI source design and shows results obtained with the MALDI source coupled to an accurate mass, high-resolution hybrid mass spectrometer. MALDI-produced ions and fragment ions thereof produced in the mass spectrometer may be analyzed and detected by the Orbitrap analyzer at a maximum mass resolution of 100,000 (FWHM) at m/z 400 with high mass accuracy. An accuracy of ≤2 ppm is achieved by internal mass calibration using lock mass functionality; using external mass calibration, an accuracy of ≤3 ppm is routinely obtained. External mass calibration of the hybrid mass spectrometer is performed using a standard calibration mixture of different peptides and matrix components. The instrumental capabilities are demonstrated for analytical methodologies such as Protein ID using Peptide Mass Fingerprint (PMF) and MS/MS analyses of small molecule samples. Stability of mass accuracy and signal-to-noise ratio for low samples loads (on plates) are demonstrated as well as the experimental dynamic range using α-cyano-4-hydroxy cinnamic acid (CHCA) matrix.     

Using mass defect plots as a discovery tool to identify novel fluoropolymer thermal decomposition products

Fire events involving halogenated materials, such as plastics and electronics, produce complex mixtures that include unidentified toxic and environmentally persistent contaminants. Ultrahigh‐resolution mass spectrometry and mass defect filtering can facilitate compound identification within these complex mixtures. In this study, thermal decomposition products of polychlorotrifluoroethylene (PCTFE, [–CClF–CF₂–]_n), a common commercial polymer, were analyzed by Fourier transform ion cyclotron resonance mass spectrometry. Using the mass defect plot as a guide, novel PCTFE thermal decomposition products were identified, including 29 perhalogenated carboxylic acid (PXCA, X = Cl,F) congener classes and 21 chlorine/fluorine substituted polycyclic aromatic hydrocarbon (X‐PAH, X = Cl,F) congener classes. This study showcases the complexity of fluoropolymer thermal decomposition and the potential of mass defect filtering to characterize complex environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

Negative ion electrospray high‐resolution tandem mass spectrometry of polyphenols

Representative compounds with a 1,3‐dihydroxybenzene substructure belonging to different important polyphenol classes (stilbenes, flavones, isoflavones, flavonols, flavanones, flavanols, phloroglucinols, anthraquinones and bisanthraquinones) were investigated based on detailed high‐resolution tandem mass spectrometry measurements with an Orbitrap system under negative ion electrospray conditions. The mass spectral behaviour of these compound classes was compared among each other not only with respect to previously described losses of CO, CH₂CO and C₃O₂ but also concerning the loss of CO₂ and successive specific fragmentations. Furthermore, some unusual fragmentations such as the loss of a methyl radical during mass spectral decomposition are discussed. The obtained results demonstrate both similarities and differences in their mass spectral fragmentation under MSⁿ conditions, allowing a characterization of the corresponding compound type. Copyright © 2015 John Wiley & Sons, Ltd.     

Chemical Stability and Electrical Property of BaCe0.7Zr0.2Nd0.1O3-α Ceramic

BaCe_0.7Zr_0.2Nd_0.1O_3?α ceramic was prepared by solid state reaction. Phase composition, surface and fracture morphologies of the material were characterized by using XRD and SEM, respectively. Chemical stability against carbon dioxide and water steam at the high temperature was tested. The conductivity and ionic transport number of the material were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 500–900°C in wet hydrogen and wet air, respectively. Using the ceramic as solid electrolyte and porous platinum as electrodes, the hydrogen‐air fuel cell was constructed, and the cell performance at the temperature from 500 to 900°C was examined. The results indicate that BaCe_0.7Zr_0.2Nd_0.1O_3?α was a single phase perovskite‐type orthorhombic system, with high density and good chemical stability in carbon dioxide and water steam atmospheres at the high temperature. The conductivity of the material in wet hydrogen and wet air was increased as the temperature rises. In wet hydrogen, the material was a pure protonic conductor with the protonic transport number of 1 from 500 to 600°C, a mixed conductor of proton and electron with the protonic transport number of 0.973–0.955 from 700 to 900°C. In wet air, the material was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.002–0.003, and the oxide ionic transport numbers were 0.124–0.179. The fuel cell could work stably. At 900°C, the maximum short‐circuit current density and power output density were 156 mA·cm^?2 and 40 mW·cm^?2, respectively.