Synthesis of well‐designed polymers carrying saccharide moieties via RAFT miniemulsion polymerization

Two hydrophobic vinyl saccharide monomers based on D ‐glucose and D ‐fructose were polymerized by employing the reversible addition‐fragmentation transfer (RAFT) miniemulsion polymerization technique to prepare well‐designed glycopolymers. Three dithiobenzoate‐RAFT agents [S?C(Ph)S? R], 1‐phenylethyl dithiobenzoate (PED), 2‐phenylprop‐2‐yl dithiobenzoate (PPD), and 2‐cyanoprop‐2‐yl dithiobenzoate (CPD), were used to control the growth of polymer chains. The best results were obtained in the presence of the PPD‐RAFT agent and the formed polymers have polydispersity index's (PDI) lower than 1.15. Under adequate miniemulsion polymerization conditions, a glycopolymer with PDI of 1.1 and molecular weight of 5 × 10⁴ g/mol has been successfully synthesized in a short reaction time of 100 min. Furthermore, some block copolymers containing saccharide segment with butyl or methyl methacrylate were prepared. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of polydopamine‐coated graphene–polymer nanocomposites via RAFT polymerization

Graphene‐polymer nanocomposites have significant potential in many applications such as photovoltaic devices, fuel cells, and sensors. Functionalization of graphene is an essential step in the synthesis of uniformly distributed graphene‐polymer nanocomposites, but often results in structural defects in the graphitic sp² carbon framework. To address this issue, we synthesized graphene oxide (GO) by oxidative exfoliation of graphite and then reduced it into graphene via self‐polymerization of dopamine (DA). The simultaneous reduction of GO into graphene, and polymerization and coating of polydopamine (PDA) on the reduced graphene oxide (RGO) surface were confirmed with XRD, UV–Vis, XPS, Raman, TGA, and FTIR. The degree of reduction of GO increased with increasing DA/GO ratio from 1/4 to 4/1 and/or with increasing temperature from room temperature to 60 °C. A RAFT agent, 2‐(dodecylthiocarbonothioylthio)?2‐methylpropionic acid, was linked onto the surface of the PDA/RGO, with a higher equivalence of RAFT agent in the reaction leading to a higher concentration of RAFT sites on the surface. Graphene‐poly(methyl methacrylate), graphene‐poly(tert‐butyl acrylate), and graphene‐poly(N‐isopropylacrylamide) nanocomposites were synthesized via RAFT polymerization, showing their characteristic solubility in several different solvents. This novel synthetic route was found facile and can be readily used for the rational design of graphene‐polymer nanocomposites, promoting their applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3941–3949     

Tadpole‐shaped amphiphilic copolymers prepared via RAFT polymerization and click reaction

The tadpole‐shaped amphiphilic copolymers with cyclic polystyrene as the head and a linear poly(N‐isopropylacrylamide) as the tail have been successfully synthesized by combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and “click” reaction. The synthesis involves two main steps: (1) preparation of a linear acetylene‐terminated PNIPAAM‐b‐PS with a side azido group anchored at the junction between two blocks; (2) intramolecular cyclization reaction to produce the cyclic PS block using “click” chemistry under high dilution. The structures, molecular weights, and molecular weight distributions of the resulted intermediates and the target polymers were characterized by their ¹H NMR, FTIR, and gel permeation chromatography. The difference of surface property between tadpole‐shaped polymer and its linear precursor was observed, and the water contact angles on the former surface are larger than that of the latter surface. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2390–2401, 2008     

Preparation of miktoarm star‐block copolymers PSn‐b‐PVAc4‐n via combination of ATRP and RAFT polymerization

Three tetrafunctional bromoxanthate agents (Xanthate₃‐Br, Xanthate₂‐Br₂, and Xanthate‐Br₃) were synthesized. Initiative atom transfer radical polymerizations (ATRP) of styrene (St) or reversible addition fragmentation chain transfer (RAFT) polymerizations of vinyl acetate (VAc) proceeded in a controlled manner in the presence of Xanthate₃‐Br, Xanthate₂‐Br₂, or Xanthate‐Br₃, respectively. The miktoarm star‐block copolymers containing polystyrene (PS) and poly(vinyl acetate) (PVAc) chains, PS_n‐b‐PVAc_4‐n (n = 1, 2, and 3), with controlled structures were successfully prepared by successive RAFT and ATRP chain‐extension experiments using VAc and St as the second monomers, respectively. The architecture of the miktoarm star‐block copolymers PS_n‐b‐PVAc_4‐n (n = 1, 2, and 3) were characterized by gel permeation chromatography and ¹H NMR spectra. Furthermore, the results of the cleavage of PS₃‐b‐PVAc and PVAc₂‐b‐PS₂ confirmed the structures of the obtained miktoarm star‐block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Dispersion RAFT polymerization of 4‐vinylpyridine in toluene mediated with the macro‐RAFT agent of polystyrene dithiobenzoate: Effect of the macro‐RAFT agent chain length and growth of the block copolymer nano‐objects

The dispersion reversible addition‐fragmentation chain transfer (RAFT) polymerization of 4‐vinylpyridine in toluene in the presence of the polystyrene dithiobenzoate (PS‐CTA) macro‐RAFT agent with different chain length is discussed. The RAFT polymerization undergoes an initial slow homogeneous polymerization and a subsequent fast heterogeneous one. The RAFT polymerization rate is dependent on the PS‐CTA chain length, and short PS‐CTA generally leads to fast RAFT polymerization. The dispersion RAFT polymerization induces the self‐assembly of the in situ synthesized polystyrene‐b‐poly(4‐vinylpyridine) block copolymer into highly concentrated block copolymer nano‐objects. The PS‐CTA chain length exerts great influence on the particle nucleation and the size and morphology of the block copolymer nano‐objects. It is found, short PS‐CTA leads to fast particle nucleation and tends to produce large‐sized vesicles or large‐compound micelles, and long PS‐CTA leads to formation of small‐sized nanospheres. Comparison between the polymerization‐induced self‐assembly and self‐assembly of block copolymer in the block‐selective solvent is made, and the great difference between the two methods is demonstrated. The present study is anticipated to be useful to reveal the chain extension and the particle growth of block copolymer during the RAFT polymerization under dispersion condition. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Thermoresponsive diblock copolymer micellar macro‐RAFT agent‐mediated dispersion RAFT polymerization and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles

The micellar macro‐RAFT agent‐mediated dispersion polymerization of styrene in the methanol/water mixture is performed and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles is investigated. The thermoresponsive diblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] trithiocarbonate forms micelles in the polymerization solvent at the polymerization temperature and, therefore, the dispersion RAFT polymerization undergoes as similarly as seeded dispersion polymerization with accelerated polymerization rate. With the progress of the RAFT polymerization, the molecular weight of the synthesized triblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine]‐b‐polystyrene linearly increases with the monomer conversion, and the PDI values of the triblock copolymers are below 1.2. The dispersion RAFT polymerization affords the in situ synthesis of the triblock copolymer nanoparticles, and the mean diameter of the triblock copolymer nanoparticles increases with the polymerization degree of the polystyrene block. The triblock copolymer nanoparticles contain a central thermoresponsive poly [N‐(4‐vinylbenzyl)‐N,N‐diethylamine] block, and the soluble‐to‐insoluble ‐‐transition temperature is dependent on the methanol content in the methanol/water mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2155–2165     

Aqueous RAFT polymerization of 2‐aminoethyl methacrylate to produce well‐defined,primary amine functional homo‐ and copolymers

We report the direct homopolymerization and block copolymerization of 2‐aminoethyl methacrylate (AEMA) via aqueous reversible addition‐fragmentation chain transfer (RAFT) polymerization. The controlled “living” polymerization of AEMA was carried out directly in aqueous buffer using 4‐cyanopentanoic acid dithiobenzoate (CTP) as the chain transfer agent (CTA), and 2,2′‐azobis(2‐imidazolinylpropane) dihydrochloride (VA‐044) as the initiator at 50 °C. The controlled “living” character of the polymerization was verified with pseudo‐first order kinetic plots, a linear increase of the molecular weight with conversion, and low polydispersities (PDIs) (<1.2). In addition, well‐defined copolymers of poly(AEMA‐b‐HPMA) have been prepared through chain extension of poly(AEMA) macroCTA with N‐(2‐hydroxypropyl)methacrylamide (HPMA) in water. It is shown that the macroCTA can be extended in a controlled fashion resulting in near monodisperse block copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5405–5415, 2009     

Synthesis and characterizations of well‐defined branched polymers with AB2 branches by combination of RAFT polymerization and ROP as well as ATRP

A well‐defined branched copolymer with PLLA‐b‐PS₂ branches was prepared by combination of reversible addition‐fragmentation transfer (RAFT) polymerization, ring‐opening polymerization (ROP), and atom transfer radical polymerization (ATRP). The RAFT copolymerization of methyl acrylate (MA) and hydroxyethyl acrylate (HEA) yielded poly(MA‐co‐HEA), which was used as macro initiator in the successive ROP polymerization of LLA. After divergent reaction of poly(MA‐co‐HEA)‐g‐PLLAOH with divergent agent, the macro initiator, poly(MA‐co‐HEA)‐g‐PLLABr₂ was formed in high conversion. The following ATRP of styrene (St) produced the target polymer, poly(MA‐co‐HEA)‐g‐(PLLA‐b‐PS₂). The structures, molecular weight, and molecular weight distribution of the intermediates and the target polymers obtained from every step were confirmed by their ¹H NMR and GPC measurements. DSC results show one T = 3 °C for the poly(MA‐co‐HEA), T = ?5 °C, T= 122 °C, and T = 157 °C for the branched copolymers (poly(MA‐co‐HEA)‐g‐PLLA), and T = 51 °C, T = 116 °C, and T = 162 °C for poly(MA‐co‐HEA)‐g‐(PLLA‐b‐PS₂). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 549–560, 2006     

Polymerization of styrene in alcohol/water mediated by a macro‐RAFT agent of poly(N‐isopropylacrylamide) trithiocarbonate: From homogeneous to heterogeneous RAFT polymerization

The reversible addition fragmentation chain transfer (RAFT) polymerization of styrene in alcohol/water mixture mediated with the poly(N‐isopropylacrylamide) trithiocarbonate macro‐RAFT agent (PNIPAM‐TTC) is studied and compared with the general RAFT dispersion polymerization in the presence of a small molecular RAFT agent. Both the homogeneous/quasi‐homogeneous polymerization before particle nucleation and the heterogeneous polymerization after particle nucleation are involved in the PNIPAM‐TTC‐mediated RAFT polymerization, and the two‐stage increase in the molecular weight (M_n) and nanoparticle size of the synthesized block copolymer is found. In the initial homogeneous/quasi‐homogeneous polymerization, the M_n and nanoparticle size slowly increase with monomer conversion, whereas the M_n and particle size quickly increase in the subsequent heterogeneous RAFT polymerization, which is much different from those in the general RAFT dispersion polymerization. Besides, the PNIPAM‐TTC‐mediated RAFT polymerization runs much faster than the general RAFT dispersion polymerization. This study is anticipated to be helpful to understand the polymer chain extension through RAFT polymerization under dispersion conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

One‐pot synthesis of hyperbranched glycopolymers by RAFT polymerization

Soluble hyperbranched glycopolymers were prepared by copolymerization of glycan monomers with reversible addition‐fragmentation chain transfer polymerization (RAFT) inimers in a simple one‐pot reaction. Two novel RAFT inimers, 2‐(methacryloyloxy)ethyl 4‐cyano‐4‐(phenylcarbonothioylthio)pentanoate (MAE‐CPP) and 2‐(3‐(benzylthiocarbonothioylthio)propanoyloxy)ethyl acrylate (BCP‐EA) were synthesized and used to prepare hyperbranched glycopolymers. Two types of galactose‐based saccharide monomers, 6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐M) and 6‐O‐(2′‐acrylamido‐2′‐methylpropanoate)‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose (proGal‐A), containing a methacrylate and an acrylamide group, respectively, were also synthesized and polymerized under the mediation of the MAE‐CPP and BCP‐EA inimers, respectively. In addition, hyperbranched poly(proGal‐M), linear poly(proGal‐A), and hyperbranched poly(proGal‐A) were generated and their polymerization kinetics were studied and compared. An unexpected difference was observed in the kinetics between the two monomers during polymerization: the relationship between polymerization rate and concentration of inimer was totally opposite in the two monomer–inimer systems. Branching analysis was conducted by using degree of branching (DB) as the measurement parameter. As expected, a higher DB occurred with increased inimer content. Furthermore, these polymers were readily deprotected by hydrolysis in trifluoroacetic acid solution resulting in water‐soluble polymers. The resulting branched glycopolymers have potential as biomimetics of polysaccharides. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Emulsion polymerization of vinyl acetate using iodine‐transfer and RAFT radical polymerizations

This study deals with control of the molecular weight and molecular weight distribution of poly(vinyl acetate) by iodine‐transfer radical polymerization and reversible addition‐fragmentation transfer (RAFT) emulsion polymerizations as the first example. Emulsion polymerization using ethyl iodoacetate as the chain transfer agent more closely approximated the theoretical molecular weights than did the free radical polymerization. Although ¹H NMR spectra indicated that the peaks of α‐ and ω‐terminal groups were observed, the molecular weight distributions show a relatively broad range (M_w/M_n = 2.2–4.0). On the other hand, RAFT polymerizations revealed that the dithiocarbamate 7 is an excellent candidate to control the polymer molecular weight (M_n = 9.1 × 10³, M_w/M_n = 1.48), more so than xanthate 1 (M_n = 10.0 × 10³, M_w/M_n = 1.89) under same condition, with accompanied stable emulsions produced. In the M_n versus conversion plot, M_n increased linearly as a function of conversion. We also performed seed‐emulsion polymerization using poly(nonamethylene L ‐tartrate) as the chiral polyester seed to fabricate emulsions with core‐shell structures. The control of polymer molecular weight and emulsion stability, as well as stereoregularity, is also discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Facile synthesis of temperature-sensitive ABA triblock copolymers by dispersion RAFT polymerization

1. Download : Download high-res image (94KB)
2. Download : Download full-size image

     

Functional and tuneable amino acid polymers prepared by RAFT polymerization

We report the application of reversible addition‐fragmentation chain transfer polymerization using a novel chain transfer agent toward the synthesis of a variety of copolymers containing proline‐derived monomeric units. This methodology enables ready access to a number of polymeric species with narrow molecular weight distributions, reliable functional unit incorporations, and high conversions. The methodology is also a facile approach to novel copolymeric species incorporating amino acids, which possess unique material properties and the potential for further organocatalytic application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Facile synthesis of star‐shaped copolymers via combination of RAFT and ring opening polymerization

Reversible addition fragmentation chain transfer (RAFT) polymerization and bifunctional sparteine/thiourea organocatalyst‐mediated ring opening polymerization (ROP) were combined to produce poly(L ‐lactide) star polymers and poly(L ‐lactide‐co‐styrene) miktoarm star copolymers architecture following a facile experimental procedure, and without the need for specialist equipment. RAFT was used to copolymerize ethyl acrylate (EA) and hydroxyethyl acrylate (HEA) into poly(EA‐co‐HEA) co‐oligomers of degree of polymerization 10 with 2, 3, and 4 units of HEA, which were in turn used as multifunctional initiators for the ROP of L ‐lactide, using a bifunctional thiourea organocatalytic system. Furthermore, taking advantage of the living nature of RAFT polymerization, the multifunctional initiators were chain extended with styrene (poly((EA‐co‐HEA)‐b‐styrene) copolymers), and used as initiators for the ROP of L ‐lactide, to yield miktoarm star copolymers. The ROP reactions were allowed to proceed to high conversions (>95%) with good control over molecular weights (ca. 28,000‐230,000 g/mol) and polymer structures being observed, although the molecular weight distributions are generally broader (1.3–1.9) than those normally observed for ROP reactions. The orthogonality of both polymerization techniques, coupled with the ubiquity of HEA, which is used as a monomer for RAFT polymerization and as an initiator for ROP, offer a versatile approach to star‐shaped copolymers. Furthermore, this approach offers a practical approach to the synthesis of polylactide star polymers without a glove box or stringent reaction conditions. The phase separation properties of the miktoarm star copolymers were demonstrated via thermal analyses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6396–6408, 2009     

Facile one‐pot/one‐step technique for preparation of side‐chain functionalized polymers: Combination of SET‐RAFT polymerization of azide vinyl monomer and click chemistry

An azido‐containing functional monomer, 11‐azido‐undecanoyl methacrylate, was successfully polymerized via ambient temperature single electron transfer initiation and propagation through the reversible addition–fragmentation chain transfer (SET‐RAFT) method. The polymerization behavior possessed the characteristics of “living”/controlled radical polymerization. The kinetic plot was first order, and the molecular weight of the polymer increased linearly with the monomer conversion while keeping the relatively narrow molecular weight distribution (M_w/M_n ≤ 1.22). The complete retention of azido group of the resulting polymer was confirmed by ¹H NMR and FTIR analysis. Retention of chain functionality was confirmed by chain extension with methyl methacrylate to yield a diblock copolymer. Furthermore, the side‐chain functionalized polymer could be prepared by one‐pot/one‐step technique, which is combination of SET‐RAFT and “click chemistry” methods. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Growing poly(N‐vinylcarbazole) from the surface of graphene oxide via RAFT polymerization

A new approach on usage of S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate (DDAT)‐covalently functionalized graphene oxide (GO) as reversible addition fragmentation chain transfer (RAFT) agent for growing of poly(N‐vinylcarbazole) (PVK) directly from the surface of GO was described. The PVK polymer covalently grafted onto GO has M_n of 8.05 × 10³, and a polydispersity of 1.43. The resulting material PVK‐GO shows a good solubility in organic solvents when compared to GO, and a significant energy bandgap of ～2.49 eV. Bistable electrical switching and nonvolatile rewritable memory effect, with a turn‐on voltage of about ?1.7 V and an ON/OFF state current ratio in excess of 10³, are demonstrated in the Al/PVK‐GO/ITO structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

RAFT polymerization of alternating styrene‐pentafluorostyrene copolymers

Reversible addition‐fragmentation chain‐transfer (RAFT) polymerization was used to control the alternating copolymerization of styrene and 2,3,4,5,6‐pentaflurostyrene. The RAFT polymerization yields a high degree of control over the molecular weight of the polymers and does not significantly influence the reactivity ratios of the monomers. The controlled free‐radical polymerization could be initiated using AIBN at elevated temperatures or using a redox couple (benzoyl peroxide/N,N‐dimethylaniline) at room temperature, while maintaining control over molecular weight and dispersity. The influence of temperature and solvent on the molecular weight distribution and reactivity ratios were investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1555–1559     

One‐step synthesis of block copolymers using a hydroxyl‐functionalized trithiocarbonate RAFT agent as a dual initiator for RAFT polymerization and ROP

A range of well‐defined block copolymers were synthesized using 4‐cyano‐4‐(dodecylsulfanylthiocarbonyl)sulfanylpentanol (CDP) as a dual initiator for reversible addition‐fragmentation chain transfer (RAFT) polymerization and ring‐opening polymerization (ROP) in a one‐step process. Styrene, (meth)acrylate, and acrylamide monomers were polymerized in a controlled manner for one block composed of vinyl monomers, and δ‐valerolactone (VL), ε‐caprolactone (CL), trimethylene carbonate (TMC), and L ‐lactide (LA) were used for the other block composed of cyclic monomers. Diphenyl phosphate was used as a catalyst for the ROP of VL, CL, and TMC, and 4‐dimethyamino pyridine for the ROP of LA. These catalysts did not interfere with RAFT polymerization and the synthesis of various block copolymers proceeded in a controlled manner. CDP was found to be a very useful dual initiator for a one‐step synthesis of various block copolymers by a combination of RAFT polymerization and ROP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Facile synthesis of well‐defined pH‐liable Schiff‐base‐type photosensitive polymers via visible‐light‐activated ambient temperature RAFT polymerization

Inspired by the structure character and photosensitive molecular mechanism of natural rhodopsin or bacteriorhodopsin, a novel pH‐liable photosensitive polymer whose chromophores directly bind with Schiff base linkages was designed. Accordingly, 2‐((3‐phenylallylidene)amino)ethyl methacrylate (PAAEMA), 2‐((3‐(4‐fluorophenyl)allylidene)amino)ethyl methacrylate (FPAAEMA), and 2‐((3‐(4‐methoxyphenyl)allylidene)amino)ethyl methacrylate (MPAAEMA) monomers were synthesized. These monomers were polymerized upon irradiating with mild visible light at ambient temperature. The results indicate that Schiff base linkages of these monomers are stable under such mild polymerizing conditions, and the weak absorption of dithioester functionalities in the visible wave range leads to a rapid and well‐controlled RAFT polymerization. The polymerization rate slows down but initialization period significantly shortens on increasing the feed molar ratio of monomer. The pendant electron‐withdrawing‐group‐substituted chromophore improves the reactivity of monomer, but electron‐donating‐group‐substituted chromophore significantly inactivates monomer. Glycidyl methacrylate (GMA) may well incorporate in this polymer via RAFT random copolymerization of PAAEMA and GMA monomers due to the comparable reactivity ratios of this monomer pair. PolyMPAAEMA exhibits reversible fluorescence emitting or quenching upon deprotonating or protonating the Schiff base linkages. This fluorescence behavior may be of interest in the fabrication of pH‐responsive photosensors, light modulators, or actuators. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6668–6681, 2009