High Degree of Polymerization in a Fullerene‐Containing Supramolecular Polymer

Supramolecular polymers based on dispersion forces typically show lower molecular weights (MW) than those based on hydrogen bonding or metal–ligand coordination. We present the synthesis and self‐assembling properties of a monomer featuring two complementary units, a C₆₀ derivative and an exTTF‐based macrocycle, that interact mainly through π–π, charge‐transfer, and van der Waals interactions. Thanks to the preorganization in the host part, a remarkable log K_a=5.1±0.5 in CHCl₃ at room temperature is determined for the host–guest couple. In accordance with the large binding constant, the monomer self‐assembles in the gas phase, in solution, and in the solid state to form linear supramolecular polymers with a very high degree of polymerization. A MW above 150 kDa has been found experimentally in solution, while in the solid state the monomer forms extraordinarily long, straight, and uniform fibers with lengths reaching several microns.     

A fast,reproducible and low‐cost method for sequence deconvolution of ‘on‐bead’ peptides via ‘on‐target’ maldi‐TOF/TOF mass spectrometry

A novel approach to high‐throughput sequence deconvolution of on‐bead small peptides (MW < 2000 Da) using on‐target MALDI‐TOF/TOF instrumentation is presented. Short peptides of pentamer and octamer length, covalently attached to TentaGel polystyrene beads through a photolabile linker, were placed onto the MALDI target, apportioned with suitable matrix (2,5‐dihydroxybenzoic acid) and then hit with the instrument laser (Nd : YAG, 355 nm). This induced easy and highly reproducible photochemical cleavage, desorption (MS mode) and fragmentation (MS/MS mode). Peptide fragments were identified with a mass accuracy of 0.1 Da of the expected values. This technique significantly accelerates the sequence determination of positive peptide hits obtained from random combinatorial libraries when screening against biological targets, paving the way for a rapid and efficient method to identify molecular imaging ligands specific to pathological targets in cancer and other diseases. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(L‐lactide)s and poly(D‐lactide)s of controlled molecular weight

High molecular weight poly(L ‐lactide)s (PLLAs) and poly(D ‐lactide)s (PDLAs) were synthesized in toluene at 70 °C by ring‐opening polymerization of optically pure L ‐lactide and D ‐lactide, using tin(II) 2‐ethylhexanoate (SnOct₂) and 2‐(2‐methoxyethoxy)ethanol as initiator and coinitiator, respectively. Under these conditions, polarimetry as well as ¹³C NMR spectroscopy indicated that the synthesized poly(lactide)s (PLAs) are more than 99% isotactic. The molecular weight was successfully controlled by adjusting the monomer‐to‐initiator molar ratio. Gel permeation chromatography and MALDI‐TOF mass spectrometry analyses showed that the polydispersity index of the PLAs is below 1.1. Moreover, MALDI‐TOF spectra showed two different chain distributions, one characterized by an even number of lactic acid repeat units and the other by an odd number of lactic acid repeat units. The second distribution, indicative of the presence of intermolecular transesterification reactions, appears at the very beginning of the polymerization and its intensity increases with the polymerization time. Finally, a reversible reaction kinetic model was used to determine the monomer equilibrium concentration ([M]_eq = 1.4 ± 0.5%) and the propagation rate constant (k_p = 14.4 ± 0.5 L mol^?1 h^?1) of the polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1944–1955, 2007     

Differential characterization of biogenic amine‐producing bacteria involved in food poisoning using MALDI‐TOF mass fingerprinting

Histamine poisoning is caused by the consumption of fish and other foods that harbor bacteria possessing histidine decarboxylase activity. With the aim of preventing histamine formation, highly specific mass spectral fingerprints were obtained from the 16 major biogenic amine‐producing enteric and marine bacteria by means of MALDI‐TOF MS analysis. All bacterial strains analyzed exhibited specific spectral fingerprints that enabled its unambiguous differentiation. This technique also identified peaks common to certain bacterial groups. Thus, two protein peaks at m/z 4182±1 and 8363±6 were found to be present in all Enterobacteriaceae species analyzed except for Morganella morganii. Peaks at m/z 3635±1 and 7267±2 were specific to both M. morganii and Proteus spp. Biogenic amine‐forming Proteus spp. exhibited three genus‐specific peaks at m/z 3980, 7960±1 and 9584±2. The genus Photobacterium also showed three genus‐specific peaks at m/z 2980±1, 4275±1 and 6578±1. The two histamine‐producing Gram‐positive bacteria Lactobacillus sp. 30A and Staphylococcus xylosus exhibited a few protein peaks in the 2000–7000 m/z range and could be easily distinguished from biogenic amine‐forming Gram‐negative bacteria. Clustering based on MALDI‐TOF MS also exhibited a good correlation with phylogenetic analysis based on the 16S rRNA gene sequence, validating the ability of the MALDI‐TOF technique to establish relationships between microbial strains and species. The approach described in this study leads the way toward the rapid and specific identification of major biogenic amine‐forming bacteria based on molecular protein markers with a goal to the timely prevention of histamine food poisoning.     

On‐line electroextraction in capillary electrophoresis: Application on the determination of glutamic acid in soy sauces

We present an on‐line, single step coupling between liquid‐liquid extraction and capillary electrophoresis with capacitively coupled contactless conductivity detection, which allows an efficient analysis of complex food matrices with high sodium content. The sodium depletion was demonstrated using an aqueous two‐phase system. The aqueous two‐phase system enables the electrically driven extraction of the target compounds. The sample was prepared in Dextran‐rich phase (8% w/v 500 kDa Dextran, DEX). The background electrolyte (acetic acid 5.0 mol/L) contained 6% w/v of 6 kDa PEG. As proof of applicability, we employed the developed method for glutamic acid quantification on soy sauces. The peak area of glutamic acid presents no significant difference (α = 0.05), while the peak area of the sodium presented a reduction of 11.7 ± 0.2 and 19 ± 3% for premium and low‐cost soy sauce samples analyzed. The glutamic acid concentration for premium soy sauce sample was 2.7 ± 0.8 and 4.8 ± 0.4 g/L, and for low‐cost soy sauce sample, the concentration was 9.9 ± 0.9 g/L, which agreed with those obtained by other analytical techniques.     

Reversible addition‐fragmentation chain transfer polymerization of methacrylates containing hole‐ or electron‐transporting groups

The controlled/living radical polymerization of 2‐(N‐carbazolyl)ethyl methacrylate (CzEMA) and 4‐(5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazol‐2‐yl)phenyl) methacrylate (t‐Bu‐OxaMA) via reversible addition‐fragmentation chain transfer polymerization has been studied. Functional polymers with hole‐ or electron‐transfer ability were synthesized with cumyl dithiobenzoate as a chain transfer agent (CTA) and AIBN as an initiator in a benzene solution. Good control of the polymerization was confirmed by the linear increase in the molecular weight (MW) with the conversion. The dependence of MW and polydispersity index (PDI) of the resulting polymers on the molar ratio of monomer to CTA, monomer concentration, and molar ratio of CTA to initiator has also been investigated. The MW and PDI of the resulting polymers were well controlled as being revealed by GPC measurements. The resulting polymers were further characterized by NMR, UV‐vis spectroscopy, and cyclic voltammetry. The polymers functionalized with carbazole group or 1,3,4‐oxadiazole group exhibited good thermal stability, with an onset decomposition temperature of about 305 and 323 °C, respectively, as determined by thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 242–252, 2007     

On‐target separation of analyte with 3‐aminoquinoline/α‐cyano‐4‐hydroxycinnamic acid liquid matrix for matrix‐assisted laser desorption/ionization mass spectrometry

3‐Aminoquinoline/α‐cyano‐4‐hydroxycinnamic acid (3AQ/CHCA) is a liquid matrix (LM), which was reported by Kumar et al. in 1996 for matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry. It is a viscous liquid and has some advantages of durability of ion generation by a self‐healing surface and quantitative performance. In this study, we found a novel aspect of 3AQ/CHCA as a MALDI matrix, which converges hydrophilic material into the center of the droplet of analyte‐3AQ/CHCA mixture on a MALDI sample target well during the process of evaporation of water derived from analyte solvent. This feature made it possible to separate not only the buffer components, but also the peptides and oligosaccharides from one another within 3AQ/CHCA. The MALDI imaging analyses of the analyte‐3AQ/CHCA droplet indicated that the oligosaccharides and the peptides were distributed in the center and in the whole area around the center of 3AQ/CHCA, respectively. This 'on‐target separation' effect was also applicable to glycoprotein digests such as ribonuclease B. These features of 3AQ/CHCA liquid matrix eliminate the requirement for pretreatment, and reduce sample handling losses thus resulting in the improvement of throughput and sensitivity. Copyright © 2012 John Wiley & Sons, Ltd.     

Laser‐induced decomposition of 2,2‐dimethoxy‐2‐phenylacetophenone and benzoin in methyl methacrylate homopolymerization studied via matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Pulsed laser polymerization (PLP) experiments were performed on the bulk polymerization of methyl methacrylate (MMA) at ?34 °C. The aim of this study was to investigate the polymer end groups formed during the photoinitiation process of MMA monomer using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPA) and benzoin as initiators via matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. Analysis of the MALDI‐TOF spectra indicated that the two radical fragments generated upon pulsed laser irradiation show markedly different reactivity toward MMA: whereas the benzoyl fragment—common to both DMPA and benzoin—clearly participates in the initiation process, the acetal and benzyl alcohol fragments cannot be identified as end groups in the polymer. The complexity of the MALDI‐TOF spectrum strongly increased with increasing laser intensity, this effect being more pronounced in the case of benzoin. This indicates that a cleaner initiation process is at work when DMPA is used as the photoinitiator. In addition, the MALDI‐TOF spectra were analyzed to extract the propagation‐rate coefficient, k_p, of MMA at ?34 °C. The obtained value of k_p = 43.8 L mol^?1 s^?1 agrees well with corresponding numbers obtained via size exclusion chromatography (k_p = 40.5 L mol^?1 s^?1). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 675–681, 2002; DOI 10.1002/pola.10150     

Block length determination of the block copolymer mPEG‐b‐PS using MALDI‐TOF MS/MS

The molar mass determination of block copolymers, in particular amphiphilic block copolymers, has been challenging with chromatographic techniques. Therefore, methoxy poly(ethylene glycol)‐b‐poly(styrene) (mPEG‐b‐PS) was synthesized by atom transfer radical polymerization (ATRP) and characterized in detail not only by conventional chromatographic techniques, such as size exclusion chromatography (SEC), but also by matrix‐assisted laser/desorption ionization tandem mass spectrometry (MALDI‐TOF MS/MS). As expected, different molar mass values were obtained in the SEC measurements depending on the calibration standards (either PEG or PS). In contrast, MALDI‐TOF MS/MS analysis allowed the molar mass determination of each block, by the scission of the weakest point between the PEG and PS block. Thus, fragments of the individual blocks could be obtained. The PEG block showed a depolymerization reaction, while for the PS block fragments were obtained in the monomeric, dimeric, and trimeric regions as a result of multiple chain scissions. The block length of PEG and PS could be calculated from the fragments recorded in the MALDI‐TOF MS/MS spectrum. Furthermore, the assignment of the substructures of the individual blocks acquired by MALDI‐TOF MS/MS was accomplished with the help of the fragments that were obtained from the corresponding homopolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Impact of updating the MALDI‐TOF MS database on the identification of nontuberculous mycobacteria

Conventional identification of mycobacteria species is slow, laborious and has low discriminatory power. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) has proved highly effective for identifying conventional bacteria, and it may also be useful for identifying mycobacteria. The aim of this study was to evaluate and compare MALDI‐TOF MS with currently recommended molecular methods for the identification of nontuberculous mycobacteria (NTM), applying Mycobacteria Libraries v3.0 (ML3.0) and v2.0 (ML2.0). A total of 240 clinical isolates of 41 NTM species grown on solid media were analysed: 132 isolates of slow‐growing mycobacteria and 108 of rapid‐growing mycobacteria. MALDI‐TOF MS, using ML3.0, identified 192 (80%) NTM isolates with a score ≥1.7, encompassing 35 (85.4%) different species, that is, 17 (7.1%; p  = 0.0863) isolates and 15 (36.6%; p  = 0.0339) species more than currently recommended molecular techniques (polymerase chain reaction reverse hybridization). All these isolates were correctly identified according to molecular identification methods. The application of ML3.0 also identified 15 (6.2%) NTM isolates more than ML2.0 (p  < 0.01). The scores obtained with MALDI‐TOF MS using ML3.0 (mean score: 1.960) were higher in 147 (61.2%) isolates than when using ML2.0 (mean score: 1.797; p  < 0.01). Three of the species analysed were not included in either database, so they were not recognized by this system. In conclusion, MALDI‐TOF MS identified more isolates and species than the recommended polymerase chain reaction reverse hybridization assays. Although the new ML3.0 is not the definitive database, it yielded better results than ML2.0. This shows that the updating of the MALDI‐TOF MS database plays an essential role in mycobacterial identification. Copyright © 2017 John Wiley & Sons, Ltd.     

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectroscopic analysis of telechelic polythiourethanes obtained by the cationic ring‐opening polymerization of six‐membered cyclic thiourethane

A matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectroscopy analysis of polythiourethanes obtained by the cationic ring‐opening polymerization of a six‐membered cyclic thiourethane [3‐benzyltetrahydro‐1,3‐oxazine‐2‐thione (BTOT)] is described. A MALDI‐TOF mass spectrum of a polymer obtained by the polymerization of BTOT with boron trifluoride etherate (BF₃OEt₂) as the initiator in nitrobenzene at 50 °C for 24 h followed by an end‐capping reaction with diethyldithiocarbamic acid diethylammonium salt showed a series of well‐resolved signals that were assignable to polythiourethanes possessing an amino group at the initiating end and a diethyldithiocarbamate group at the terminating end. In comparison with the MALDI‐TOF mass spectra of polymers obtained by polymerization with trifluoromethanesulfonic acid or methyl trifluoromethanesulfonate, the plausible initiating species in the polymerization with BF₃OEt₂ was estimated to be a proton, which successively eliminated carbonyl sulfide to produce a secondary amine group at the initiating end. The secondary amine group in the obtained telechelic polymer was converted to a tertiary amine group by a reaction with benzyl bromide in the presence of triethylamine, and this was confirmed by MALDI‐TOF mass spectroscopy. Furthermore, a telechelic polymer with a pyrrole end group was successfully synthesized by the end‐capping reaction of the growing species in the polymerization of BTOT with sodium 1‐pyrrolecarbodithioate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4281–4289, 2006     

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry study on copolymers obtained by the alternating copolymerization of bis(γ‐lactone) and epoxide with potassium tert‐butoxide

Oligomer samples obtained by the anionic copolymerization of a bis(γ‐lactone), 2,8‐dioxa‐1‐methylbicyclo[3.3.0]octane‐3,7‐dione ( 1 ), and glycidyl phenyl ether with potassium tert‐butoxide have been analyzed by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. The MALDI‐TOF mass spectra of these cooligomers show well‐resolved signals that can be reliably assigned to linear, alternating cooligomers that have carboxylate chain ends or alkoxide chain ends and cyclic ones. The formation of these three series of cooligomers suggests that the polymerization process involves concomitant intermolecular transesterification and intramolecular back‐biting. The intramolecular back‐biting reaction causes the formation of cyclic cooligomers, whereas the intermolecular transesterification causes the reduction of the molecular weight and the transformation of the alkoxide active chain end into a carboxylate chain end. The MALDI‐TOF mass spectrometry study has shown that an excess of monomer 1 enhances the selectivity of propagation by increasing the probability of the attack of the alkoxide chain end to 1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2643–2649, 2005     

ESI‐MS and MALLS analysis of quaternary structure of molluscan hemocyanins

The understanding of the function of macromolecular complexes is mainly related to a precise knowledge of their structure. Recently, the development of suitable mass spectrometric techniques (electrospray ionization (ESI) and matrix‐assisted laser desorption/ionization (MALDI)) and multi‐angle laser light scattering has enabled mass determination of native complexes and of their subunits. By these techniques, the structure and association/dissociation behavior of huge molecules of molluscan Octopus vulgaris, Sepia officinalis and Rapana venosa have been characterized. Molecular masses of the native and dissociated molecule of cephalopodan Hcs O. vulgaris (3545 and 359.3 kDa, respectively) and S. officinalis (4134 and 443.8 kDa, respectively) revealed that only one type subunit organizes their molecules, while the presence of two isoforms with different masses (422.8 and 400.0 kDa) has been determined for gastropodan R. venosa Hc, aggregated into didecamers. The difference of their structural subunits was also established after limited proteolysis with TPCK‐trypsin. Eight functional units (FUs) with masses of ~ 50 kDa were isolated from both subunits of RvH and isoform of Sepia officinalis, while seven FUs were purified from OvH. Further characterization of proteins by ESI‐mass spectrometry (MS) and MALDI‐MS, methods gave insights into post‐translational modifications such as glycosylation. Glycosylation of O. vulgaris and S. officinalis Hcs was suggested based on the differences (11.6 and 40.0 kDa, respectively) between the masses measured by ESI‐MS and those calculated by their gene sequences. Copyright © 2012 John Wiley & Sons, Ltd.     

Direct identification of trypanosomatids by matrix‐assisted laser desorption ionization–time of flight mass spectrometry (DIT MALDI‐TOF MS)

Accurate and rapid determination of trypanosomatids is essential in epidemiological surveillance and therapeutic studies. Matrix‐assisted laser desorption ionization/time of flight mass spectrometry (MALDI‐TOF MS) has been shown to be a useful and powerful technique to identify bacteria, fungi, metazoa and human intact cells with applications in clinical settings. Here, we developed and optimized a MALDI‐TOF MS method to profile trypanosomatids. trypanosomatid cells were deposited on a MALDI target plate followed by addition of matrix solution. The plate was then subjected to MALDI‐TOF MS measurement to create reference mass spectra library and unknown samples were identified by pattern matching using the BioTyper software tool. Several m/z peaks reproducibly and uniquely identified trypanosomatids species showing the potentials of direct identification of trypanosomatids by MALDI‐TOF MS. Moreover, this method discriminated different life stages of Trypanosoma cruzi, epimastigote and bloodstream trypomastigote and Trypanosoma brucei, procyclic and bloodstream. T. cruzi Discrete Typing Units (DTUs) were also discriminated in three clades. However, it was not possible to achieve enough resolution and software‐assisted identification at the strain level. Overall, this study shows the importance of MALDI‐TOF MS for the direct identification of trypanosomatids and opens new avenues for mass spectrometry‐based detection of parasites in biofluids. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparison of methods for simultaneous identification of bacterial species and determination of metabolic activity by protein‐based stable isotope probing (Protein‐SIP) experiments

We developed a concept for analysing carbon and nitrogen fluxes in microbial communities by employing protein‐based stable isotope probing (Protein‐SIP) in metabolic labelling experiments with stable isotope labelled substrates. For identification of microbial species intact protein profiling (IPP) can be used, whereas the assessment of their metabolic activity is achieved by shotgun mass mapping (SMM). Microbial cultures were grown on substrates containing ¹³C or ¹⁵N. For identification of species we tested both the IPP and the SMM approaches. Mass spectra (MALDI‐MS) were taken from mixtures of either intact proteins or peptides from tryptic digestion for generating species‐specific peak patterns. In the case of SMM, the fragmentation of peptides was additionally used to obtain sequence information for species identification. Mass spectra of peptide sequences allow calculation of the amount of ¹³C or ¹⁵N incorporation within peptides for determining metabolic activity of the specific species. The comparison of IPP and SMM revealed a higher robustness of species identification by SMM. In addition, the assessment of incorporation levels of ¹³C and ¹⁵N into peptides by SMM revealed a lower uncertainty (0.5–0.8 atom %) compared to IPP (6.4–8.9 atom %). The determination of metabolic activity and function of individual species by Protein‐SIP can help to analyse carbon and nitrogen fluxes within microbial communities. Copyright © 2009 John Wiley & Sons, Ltd.     

Activated Platelet‐Derived Vesicles for Efficient Hemostatic Activity

In this study, activated platelet‐derived vesicles (Act‐VEs) are developed as a novel hemostatic biomaterial. Spherical Act‐VEs (114.40 ± 11.69 nm in size) with surface charges of ?24.73 ± 1.32 mV are successfully prepared from thrombin‐activated murine platelets with high surface expression of active glycoprotein IIb/IIIa (GP IIb/IIIa, also known as αIIbβ3) and P‐selectin. Although nanosized vesicles from resting platelets (VEs) and Act‐VEs showed similar sizes and surface charges, Act‐VEs formed much larger aggregates in the presence of thrombin and CaCl₂, compared to VEs. After incubation with fibrinogen, Act‐VEs formed much denser fibrin networks compared to platelets or VEs, probably due to active αIIbβ3 on the surfaces of the Act‐VEs. After intravenous injection of the Act‐VEs, tail bleeding time and the blood loss are greatly reduced by Act‐VEs in vivo. In addition, Act‐VEs showed approximately sevenfold lower release of pro‐inflammatory interleukin‐1β (IL‐1β) during incubation for 4 days, compared to platelets. Taken together, the formulated Act‐VEs can serve as a promising hemostatic biomaterial for the efficient formation of fibrin clots without releasing pro‐inflammatory cytokine.     

Analysis of human plasma lipids and soybean lecithin by means of high‐performance thin‐layer chromatography and matrix‐assisted laser desorption/ionization mass spectrometry

An improved analytical strategy for the analysis of complex lipid mixtures using matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) in combination with high‐performance thin‐layer chromatography (HPTLC) is reported. Positive ion MALDI RTOF MS was applied as a rapid screening tool for the various neutral (e.g. triacylglycerols) and polar (e.g. glycerophospholipids and ‐sphingolipids) lipid classes derived from crude lipid extracts of e.g. human plasma as well as soybean lecithin. Finally, MALDI seamless post‐source decay (PSD) product ion analysis was performed in order to obtain further structural information (head‐ and acyl‐group identification) of selected lipid species and structure verification. A Coomassie Brilliant Blue R‐250 staining protocol for lipids on HPTLC plates was evaluated and was found to be fully compatible with subsequent MALDI‐MS. Lipids were analyzed after elution from the HPTLC phase material of the selected band (corresponding to certain lipid classes) by using the proper organic solvent mixture or in few cases directly from the HPTLC plates (a type of on‐line HPTLC/MALDI‐MS coupling). More than 70 distinct lipid species from seven different lipid classes in the range between m/z 500 and 1500 could be identified from the lipid extracts of human plasma and soybean lecithin, respectively. The general high sensitivity of MALDI‐MS detection allowed the analysis of even minor lipid classes from only very small volumes of human plasma (50 µL). The combination of HPTLC, Coomassie staining and positive ion MALDI curved field RTOF‐MS represents a straightforward strategy during lipidomics studies of food and clinically relevant human lipid samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Simultaneous Electrochemical Detection of Co(II) and Cu(II) by 1‐Diazo‐2‐Naphthol‐4‐Sulfonic Acid/MWCNTs Modified Electrode

This work describes a simple preparation of 1‐diazo‐2‐naphthol‐4‐sulfonic acid (1,2,4‐acid) and multiwalled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE) for the simultaneous detection of Co(II) and Cu(II). MWCNTs, with their good conductivity and large surface area, were drop‐casted onto the surface of the GCE prior to the electrodeposition of 1,2,4‐acid, a metal chelating agent. Co(II) and Cu(II) were simultaneously measured by differential pulse anodic stripping voltammetry (DPASV) in a batch system. Under optimum conditions, the linear range of Co(II) was between 0.10 and 2.5 μg mL⁻¹ with an LOD of 80 ng mL⁻¹. Two linear ranges were obtained for Cu(II), 0.0050 to 0.030 μg mL⁻¹ and 0.040 to 0.25 μg mL⁻¹,with an LOD of 2.4 ng mL⁻¹. The method offered a high operational stability for up to 52 measurements (RSD=3.4 % for Co(II) and 2.6 % for Cu(II)) and good reproducibility (RSD=1.2 % for Co(II) and 1.7 % for Cu(II)). In the simultaneous detection of Co(II) and Cu(II), there was no effect from common interferences found in wastewater. The method was successfully applied in real water samples with good recoveries (88.2±0.8 to 102.0±0.8 % for Co(II) and 96.5±0.4 to 103.8±0.9 % for Cu(II)) and the results were in good agreement with those obtained from inductively coupled plasma optical emission spectrometry (ICP‐OES) (P >0.05).     

Investigation of catalyst‐transfer condensation polymerization for synthesis of poly(p‐phenylenevinylene)

Kumada‐Tamao coupling polymerization of 1,4‐dialkoxy‐2‐bromo‐5‐(2‐chloromagnesiovinyl)benzene ( 1 ) and 1,4‐dialkoxy‐2‐(2‐bromovinyl)‐5‐chloromagnesiobenzene ( 2 ) with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of 2‐{2‐[(2,5‐dialkoxy‐4‐iodophenyl)]vinyl}‐4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolane ( 3 ), its bromo counterpart 4 , and 2,5‐dialkoxy‐4‐(2‐bromovinyl)phenylboronic acid ( 5 ) with a Pd initiator were investigated under catalyst‐transfer condensation polymerization conditions for the synthesis of well‐defined poly(p‐phenylenevinylene) (PPV). The Kumada‐Tamao polymerization of vinyl Grignard‐type monomer 1 with Ni(dppp)Cl₂ at room temperature did not proceed, whereas aryl Grignard‐type monomer 2 afforded oligomers of low molecular weight. Matrix‐assisted laser desorption ionization time‐of‐flight (MALDI‐TOF) mass spectra of the polymer obtained from 2 implied that the Grignard end group reacted with tetrahydrofuran to terminate polymerization. On the other hand, Suzuki‐Miyaura polymerization of vinyl boronic acid ester type monomers 3 and 4 and phenylboronic acid type monomer 5 with a Pd initiator and aqueous KOH at ?20 °C to room temperature yielded the corresponding PPV with high molecular weight within a few minutes. However, the molecular weight distribution was broad, and MALDI‐TOF mass spectra showed the peaks of polymers bearing no initiator unit at the chain end, as well as those of polymers with the initiator unit. These results indicated that intermolecular chain transfer of the Pd catalyst occurred. Dehalogenation and disproportionation of the growing end also took place as side reactions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2643‐2653     

Ultra‐high molecular weight poly(ε‐caprolactone) by means of diphenyl bismuth bromide

Diphenyl bismuth bromide (Ph₂BiBr) allows for polymerizations of ε‐caprolactone in bulk at temperatures as low as 40 °C. Time conversion curves indicate a lower reactivity than tin(II) 2‐ethyl hexanoate (SnOct₂) plus alcohol at 120 °C and also at 60 °C. Ph₂BiBr also proved to be less reactive than Ph₂BiOEt, but more reactive than BiBr₃ and Bi(III)n‐hexanoate. Small amounts (≤1 wt %) of cyclic oligoester were detectable by MALDI‐TOF mass spectrometry even at a polymerization temperature of 40 °C. The molar masses depend on the monomer–initiator ratio (M/I) but not in a simple parallel manner. With M/I = 600/1 number average molecular weights (M_ns, corrected values) around 500 kDa were obtained. Even at low M/Is high molar mass polylactones were found and CH₂Br endgroups were not detectable. However, upon addition of tetra(ethylene glycol) the coinitiator was completely incorporated yielding telechelic polylactones and the molar mass increased with the monomer–coinitiator ratio. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 851–859, 2008