Polyplatinayne/polyoxometalate composite Langmuir‐Blodgett films: Preparation,structural characterization,and potential optoelectronic applications

A new family of organometallic/inorganic composite Langmuir‐Blodgett (LB) films consisting of rigid‐rod polyplatinayne polymer ([Pt‐T(OMe‐Fl)T]_∞ or [Pt‐T(F‐Fl)T]_∞, where the triplet bonds are abbreviated by T, and fluorene ring by Fl) as the π‐conjugated organometallic molecule, polyoxometalate (POM, POM = K₃PMo₁₂O₄₀, H₃PW₁₂O₄₀, or H₆P₂W₁₈O₆₂) of the Keggin and Dawson structures as the inorganic component, and dimethyldioctadecylammonium bromide (DODA) or a mixture of octadecanoic acid (OA) and docosanoic acid (DA) as the auxiliary film‐forming agent were prepared and characterized by π–A isotherms, UV–Vis absorption spectra, photoluminescence spectra, atomic force microscopy imaging, scanning tunneling microscopy, and low‐angle X‐ray diffraction. Our experimental results indicate that steady, even, and ordered Langmuir and LB films are formed in pure water and polyoxometalate subphases. It was shown that the POM molecules are probably embedded inside the polyplatinayne molecules in the LB film structure and they can quench the luminescence of the Pt polyyne. These Pt‐polyyne based LB films display interesting electric conductivity behavior. [Pt‐T(OMe‐Fl)T]_∞/DODA/HPW₁₂ monolayer film shows a good electrical conductivity, and the tunneling current amounts to ±100 nA when the voltage is set at ±8 V. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3193–3206, 2008     

Preparation, luminescent, structural and electrical properties of Langmuir-Blodgett films of new organomercurial acetylide complex/heteropolyoxometalate hybrid composites

A new family of organometallic/inorganic nanohybrid Langmuir-Blodgett (LB) films consisting of rigid-rod organomercury acetylide complex (OMA) as the π-conjugated organometallic composite and heteropolyacid salts MPA (MPA = K₃PMo₁₂O₄₀, K₅BW₁₂O₄₀, Na₅IMo₆O₆₂) of the Keggin and Anderson structures as the inorganic composite, were prepared and characterized by π−A isotherms, UV−Vis absorption spectra, fluorescence spectra, scanning tunneling microscopy, atomic force microscopy imaging and low-angle X-ray diffraction. Our experimental results indicate that steady Langmuir and LB films are formed in pure water and heteropolyacid salt subphases. Luminescence spectra of hybrid LB films show that MPA can quench the emission of OMA to some extent. These alkynylmercury(II) based LB films display interesting electrical conductivity behavior. They all show decent electrical conductivity, and the tunneling current amounts to ±100 nA when the voltage is set at ±3 ∼ ±5 V.     

Keggin‐Type Polyoxometalate‐Based Metal–Organic Networks for Photocatalytic Dye Degradation

The reaction of Keggin‐type polyoxometalate (POM) units, transition‐metal (TM) ions, and a rigid bis(imidazole) ligand (1,4‐bis(1‐imidazolyl)benzene (bimb)) in a hydrothermal environment led to the isolation of four new POM‐based metal–organic networks, [H₂L][CuL][SiW₁₂O₄₀]?2 H₂O ( 1 ), [H₂L]₂[Co(H₂O)₃L][SiW₁₁CoO₃₉]?6 H₂O ( 2 ), KH[CuL]₂[SiW₁₁CoO₃₉(H₂O)]?2 H₂O ( 3 ), and [CuL]₄[GeW₁₂O₄₀]?H₂O ( 4 ; L=bimb). All four compounds were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. Compounds 1 and 3 are new 3D networks with 1D channels. Compounds 2 and 4 contain 2D networks, which further stack into 3D supramolecular networks. The contributions of pH value, the negative charge of the POM, and the TM coordination modes to the construction of 3D networks were elucidated by comparing the synthetic conditions and structures of compounds 1 – 4 . The photocatalytic properties of compounds 1 – 4 were investigated using methylene blue (MB) degradation under UV light. All compounds showed good catalytic activity and structural stability. The possible catalytic mechanism was discussed on the basis of active‐species trapping experiments. The different photocatalytic activities of compounds 1 – 4 were explained by comparison of the band gaps of different POM species and different packing modes of POM units in these hybrid compounds.     

Visible‐Light‐Induced Water Oxidation Mediated by a Mononuclear‐Cobalt(II)‐Substituted Silicotungstate

A mononuclear‐cobalt(II)‐substituted silicotungstate, K₁₀[Co(H₂O)₂(γ‐SiW₁₀O₃₅)₂] ? 23 H₂O (POM‐ 1 ), has been evaluated as a light‐driven water‐oxidation catalyst. With in situ photogenerated [Ru(bpy)₃]³⁺ (bpy=2,2′‐bipyridine) as the oxidant, quite high catalytic turnover number (TON; 313), turnover frequency (TOF; 3.2 s^?1), and quantum yield (Φ_QY; 27 %) for oxygen evolution at pH 9.0 were acquired. Comparison experiments with its structural analogues, namely [Ni(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 2 ) and [Mn(H₂O)₂(γ‐SiW₁₀O₃₅)₂]^10? (POM‐ 3 ), gave the conclusion that the cobalt center in POM‐ 1 is the active site. The hydrolytic stability of the title polyoxometalate (POM) was confirmed by extensive experiments, including UV/Vis spectroscopy, linear sweep voltammetry (LSV), and cathodic adsorption stripping analysis (CASA). As the [Ru(bpy)₃]²⁺/visible light/sodium persulfate system was introduced, a POM–photosensitizer complex formed within minutes before visible‐light irradiation. It was demonstrated that this complex functioned as the active species, which remained intact after the oxygen‐evolution reaction. Multiple experimental parameters were investigated and the catalytic activity was also compared with the well‐studied POM‐based water‐oxidation catalysts (i.e., [Co₄(H₂O)₂(α‐PW₉O₃₄)₂]^10? (Co₄‐POM) and [Co^IIICo^II(H₂O)W₁₁O₃₉]^7? (Co₂‐POM)) under optimum conditions.     

Preparation, luminescence and photoelectric properties of Langmuir-Blodgett films of alkynylplatinum(II)-zinc(II) porphyrinate/heteropolyoxometalate hybrid composites

A new class of organometallic/inorganic hybrid Langmuir-Blodgett (LB) films, consisting of rigid-rod alkynylplatinum(II)-zinc(II) porphyrinate complex (OMA) as the π-conjugated donor-acceptor-type molecule and tungsto(molybdo)phosphoric heteropolyacids (HPA) (HPA = H₃PMo₁₂O₄₀ and H₃PW₁₂O₄₀, abbreviated as HPMo₁₂ and HPW₁₂, respectively) of the Keggin structure as the inorganic component, were prepared and characterized by π-A isotherms, UV-vis absorption and luminescence spectra, low-angle X-ray diffraction, scanning tunneling microscopy and surface photovoltage spectroscopy. Our experimental results indicate that stable, well-defined and well-organized Langmuir and LB films have been formed in pure water and heteropolyacid subphase. They typically have a highly organized lamellar structure in which a monolayer of HPA is most likely embedded inside the OMA molecular space formed by long chains of PBu₃. Luminescence spectra of these hybrid LB films show that HPMo₁₂ and HPW₁₂ can enhance the emission of OMA to some extent. These LB composites show good photovoltage responses and a photovoltage of 79 μV can be obtained for the OMA/HPMo₁₂ system when it is excited by light. The monolayer LB films on ITO wafer can also display interesting electrical conductivity.     

Synthesis of α‐Dawson‐Type Silicotungstate [α‐Si2W18O62]8− and Protonation and Deprotonation Inside the Aperture through Intramolecular Hydrogen Bonds

The design of structurally well‐defined anionic molecular metal–oxygen clusters, polyoxometalates (POMs), leads to inorganic receptors with unique and tunable properties. Herein, an α‐Dawson‐type silicotungstate, TBA₈[α‐Si₂W₁₈O₆₂] ? 3 H₂O ( II ) that possesses a ?8 charge was successfully synthesized by dimerization of a trivacant lacunary α‐Keggin‐type silicotungstate TBA₄H₆[α‐SiW₉O₃₄] ? 2 H₂O ( I ) in an organic solvent. POM II could be reversibly protonated (in the presence of acid) and deprotonated (in the presence of base) inside the aperture by means of intramolecular hydrogen bonds with retention of the POM structure. In contrast, the aperture of phosphorus‐centered POM TBA₆[α‐P₂W₁₈O₆₂]?H₂O ( III ) was not protonated inside the aperture. The density functional theory (DFT) calculations revealed that the basicities and charges of internal μ₃‐oxygen atoms were increased by changing the central heteroatoms from P⁵⁺ to Si⁴⁺, thereby supporting the protonation of II . Additionally, II showed much higher catalytic performance for the Knoevenagel condensation of ethyl cyanoacetate with benzaldehyde than I and III .     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]⋅n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was −67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

A low dielectric constant polyimide/polyoxometalate composite

A silane‐modified mono‐lacunary Keggin‐type polyoxometalate (POM), (Bu₄N)₄[SiW₁₁O₃₉{(CH₂?CH? Si)₂O}] (SiW₁₁? CH?CH₂), was obtained by reaction of vinyltrimethoxysilane with K₈(SiW₁₁O₃₉) in acidic MeCN/H₂O mixed solutions. Then, the modified polyoxometalate was physically blended with the pyromellitic dianhydride (PMDA)‐4,4′‐oxydianiline (ODA) poly(amic acid) and the blends were thermally imidized to form polyimide/ polyoxometalate composites. The X‐ray diffraction (XRD) analysis indicates that the polyoxometalate clusters cannot form crystalline structures in the composite, suggesting that the blending leads to improved compatibility between the polymer matrix and the modified polyoxometalate. The EDS (W‐mapping) studies on the composite films reveal that the polyoxometalate clusters are well dispersed in the polyimide matrix. The physical incorporation of modified POM into polyimide remarkably reduced the dielectric constant of the latter from 3.29 to 2.05 when 20 wt% of SiW₁₁? CH?CH₂ was used. Besides, the addition of the modified POM into polyimide increased the storage modulus of polyimide without severely affecting its thermal properties. Copyright © 2009 John Wiley & Sons, Ltd.     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Preparation and characterization of redox cellulose Langmuir–Blodgett films containing a ferrocene derivative

The 3‐ferrocenoylpropanoyl group, one of the redox species, was introduced at C‐2 and/or C‐3 positions of 6‐O‐(4‐stearyloxytrityl)cellulose. The spreading behavior of the cellulose derivatives on the water surface and the properties of Langmuir–Blodgett (LB) films were investigated. The surface pressure–area isotherm of the cellulose monolayer was changed by the subphase temperature. Uniform monolayers of 6‐O‐(4‐stearyloxytrityl)cellulose 3‐ferrocene propionate (STCFc) could be deposited successively onto several substrates by the horizontal lifting method at 10 mN m^?1, and this produced X‐type LB films. The successive uniform depositions of STCFc were confirmed by ultraviolet–visible absorption spectra. X‐ray diffraction measurements indicated that the thickness of the STCFc molecules in the LB films was 1.99 nm. Fourier transform infrared spectroscopy measurements supported the idea that hydrocarbon chains in the LB films were highly ordered (trans‐zigzag) and oriented considerably perpendicular to the surface of the substrate. Moreover, the C?O group of the ferrocenoyl groups was perpendicular to the surface of the substrate, and the ferrocene group was occupied in the water phase. Cyclic voltammograms for the STCFc monolayer on a gold electrode exhibited surface waves. The interfacial electron‐transfer process between the redox site incorporated into the cellulose LB monolayer and the electrode surface was fast enough at a scanning rate lower than 100 mV s^?1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5023–5031, 2005     

Correlation of Molecular Assembly and Interactions in Crystals and Langmuir–Blodgett Films of N‐(2,4‐dinitrophenyl)‐n‐octadecylamine

Correlation of molecular organization in crystals and in ultrathin films is of fundamental interest in the design of molecular materials based on thin films. We have chosen as a test case, N‐(2,4‐dinitrophenyl)‐n‐octadecylamine (DNPOA), a potential candidate for the fabrication of Langmuir–Blodgett (LB) films for quadratic nonlinear optical applications. Like several other 4‐nitroaniline derivatives, DNPOA does not form stable monolayers at the air–water interface. This has precluded investigations of their organization in LB films. We have stabilized composite Langmuir films of DNPOA with the phospholipid molecule DSPC and fabricated their LB films. Successful growth of single crystals of DNPOA allowed structure determination and detailed analysis of molecular associations in the solid state. Electronic absorption spectra of DNPOA in solution, in the solid state and in the LB film are investigated. Modeling of the various spectral signatures by semiempirical computations on molecular clusters extracted from the crystal lattice provides insight into the correlation between the molecular organization in crystals and in LB films.     

Visible‐Light‐Induced Photoredox Catalysis with a Tetracerium‐Containing Silicotungstate

The development of visible‐light‐induced photocatalysts for chemoselective functional group transformations has received considerable attention. Polyoxometalates (POMs) are potential materials for efficient photocatalysts because their properties can be precisely tuned by changing their constituent elements and structures and by the introduction of additional metal cations. Furthermore, they are thermally and oxidatively more stable than the frequently utilized organometallic complexes. The visible‐light‐responsive tetranuclear cerium(III)‐containing silicotungstate TBA₆[{Ce(H₂O)}₂{Ce(CH₃CN)}₂(μ₄‐O)(γ‐SiW₁₀O₃₆)₂] (CePOM; TBA=tetra‐n‐butylammonium) has now been synthesized; when CePOM was irradiated with visible light (λ>400 nm), a unique intramolecular Ce^III‐to‐POM(W^VI) charge transfer was observed. With CePOM, the photocatalytic oxidative dehydrogenation of primary and secondary amines as well as the α‐cyanation of tertiary amines smoothly proceeded in the presence of O₂ (1 atm) as the sole oxidant.     

Synthesis,Crystal Structure,Fluorescence and Photocatalytic Properties of a Copper Compound with 2‐Phenyl‐1H‐1,3,7,8‐tetraazacyclopenta[l]phenanthrene and Silicotungstic Acid

The polyoxometalate compound [CuPTCP(H₂O)_2.5]₂[SiW₁₂O₄₀] · 10.5H₂O ( 1 ) was synthesized under hydrothermal conditions using 2‐phenyl‐1H‐1,3,7,8‐tetraazacyclopenta[l]phenanthrene (PTCP) and Keggin‐type silicotungstic acid (H₄SiW₁₂O₄) as neutral ligands. Compound 1 was characterized by single‐crystal X‐ray diffraction, elemental analysis, as well as IR and UV/Vis spectroscopy. It crystallizes in the orthorhombic space group Cmcm with a = 15.490(8) nm, b = 25.263(8) nm, c = 20.988(8) nm, α = 90°, β = 90°, γ = 90°, V = 8213(6) nm³, Z = 2. Compared with the ligand PTCP, the fluorescent spectra of compound 1 are different. Furthermore, the Rhodamine B (RhB) photodegration process by compound 1 as catalyst was studied. It could be shown that the DR% of compound 1 is more than twice that of pure silicotungstic acid.     

Layer—by—layer Multilaryer Films Self—assembled from a Rare—earth—containing Poly—oxometalate,Na9[Eu（W5O18）2] and Poly （allylamine hydrochloride） and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxometalate Na9[Eu(W5O18)2](EW) and poly (allymamine hydrochloride)(PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solution.The fabrication process of the EW/PAH multilaryer films was followed by UV-vis spectroscopy and ellipsometry,which show that the deposition process is linear and highly reproducible from layer to layer.An average EW/PAH bilayer thickness of ca.2.1nm was determined by ellipsometry.In addition,the scanning electron microscopy(SEM) image of the EW/PAH film indicates that the film surface is relatively uniform and smooth.The photoluminescent properties of these films were also investigated by fluorescence spectroscopy.     

Redox‐Controlled Helical Self‐Assembly of a Polyoxometalate Complex

Polyoxometalate (POM) complex (DODA)₂[Mo₆O₁₉] with a symmetrical linear structure was prepared conveniently by replacing the tetrabutylammonium (TBA) counterions of Lindquist‐type cluster (TBA)₂[Mo₆O₁₉] with cationic surfactant dioctadecyldimethylammonium (DODA). A helical self‐assembled structure of the complex was formed in dichloromethane/propanol. The dynamically reversible transformation between helical and spherical assemblies on alternate UV irradiation and H₂O₂ oxidation was characterized by SEM, TEM, and UV/Vis studies. The redox‐controlled morphology change is modulated by variation of the electrostatic interactions between the inorganic polyanion and the organic cation DODA through controlling the redox properties of the POM component, as shown by the XRD, X‐ray photoelectron spectroscopic, and ¹H NMR measurements. The strategy applied herein is a unique example of targeted smart and helical assembly of POM complexes.     

有机金属聚合物/多酸纳米杂化LB膜的制备与光电性质研究

以含有共轭大π键的有机金属聚合物(OMP)作有机组分, 以Keggin结构和Dawson结构钨(钼)磷杂多酸作无机组分, 以十八胺为辅助成膜剂, 用LB技术制备了3种新型有机金属聚合物/十八铵/杂多阴离子OMP/ODA/HPA (HPA＝PMo₁₂, PW₁₂, P₂Mo₁₈)杂化LB膜. 用π-A曲线﹑UV-vis吸收光谱﹑荧光光谱﹑原子力显微镜(AFM)﹑扫描隧道显微镜(STM)和表面光电压谱(SPS)对标题LB膜的成膜性能及光电性质进行了研究, 结果表明标题杂化LB膜的崩溃压为26.8 mN/m, 在可见光区有较强的光电压响应, 并有好的发光性质. 当电压为±8.0 V时, 隧道电流是－0.1～－2.3 nA.     

Synthesis,surface properties,and morphologies of poly[methyl(3,3,3‐trifluoropropyl)siloxane]‐b‐polystyrene‐b‐poly(tert‐butyl acrylate) triblock copolymers by a combination of anionic ROP and ATRP

A series of well‐defined poly[methyl(3,3,3‐trifluoropropyl)siloxane]‐b‐polystyrene‐b‐poly(tert‐butyl acrylate) (PMTFPS‐b‐PS‐b‐PtBA) triblock copolymers were prepared by a combination of anionic ring‐opening polymerization of 1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane (F₃), and atom transfer radical polymerization (ATRP) of styrene (St) and tert‐butyl acrylate (tBA), using the obtained α‐bromoisobutyryl‐terminal PMTFPS (PMTFPS‐Br) as the macroinitiators. The ATRP of St from PMTFPS‐Br, as well as the ATRP of tBA from the obtained PMTFPS‐b‐PS‐Br macroinitiators, has typical characteristic of controlled/living polymerization. The results of contact angle measurements for the films of PMTFPS‐b‐PS‐b‐PtBA triblock copolymers demonstrate that the compositions have an effect on the wetting behavior of the copolymer films. For the copolymer films with different compositions, there may be different macroscale or nanoscale structures on the outmost layer of the copolymer surfaces. The films with high content of PtBA blocks exhibit almost no ordered microstructures on the outmost layer of the copolymer surfaces, even though they have microphase‐separated structures in bulk. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

2,5-双(乙炔基二茂铁)噻吩/钨磷杂多酸纳米杂化LB膜的制备与光电性质研究

以含有共轭大π键的2,5-双(乙炔基二茂铁)噻吩(BFET)和二甲基双十八烷基铵(DMDOA)与Keggin结构和Dawson结构钨磷杂多酸做成膜材料, 用LB技术组装了两种新型无机-有机杂化LB膜. 用π-A曲线、UV-vis吸收光谱、原子力显微镜(AFM)、扫描隧道显微镜(STM)、荧光光谱和表面光电压谱(SPS)对标题LB膜的成膜性能、结构及光电性质进行了研究, 发现标题杂化LB膜的粒子具有纳米尺寸, 在可见光区有较强的光电压响应, 在电压为±2.0 V时, 隧道电流值达到±100 nA.     

Boehmite nano‐particles functionalized with silylpropylamine‐supported Keggin‐type heteropolyacids: Catalysts for epoxidation of alkenes

Boehmite nano‐particles with a high degree of surface hydroxyl groups were covalently functionalized by 3‐(trimethoxysilyl)‐propylamine to support H₃[PMo₁₂O₄₀], H₃[PW₁₂O₄₀], H₄[SiMo₁₂O₄₀] and H₄[SiW₁₂O₄₀] Keggin‐type heteropolyacids. After characterization of these catalysts by FT‐IR, powder X‐ray diffraction, TG/differential thermal analysis, CHN, inductively coupled plasma and transmission electron microscopy techniques, they were applied to the epoxidation of cis‐cycloocten. The progress of the reactions was investigated by gas–liquid chromatography, and the catalytic procedures were optimized for the parameters involved, such as the solvent and oxidant. The results showed that 25 mg of supported H₃[PMo₁₂O₄₀] catalyst in 1 ml C₂H₄Cl₂ with 0.5 mmol cyclooctene and 1 mmol tert‐butylhydroperoxide at reflux temperature gave 98% yield over 15 min. Recycling experiments revealed that these nanocatalysts could be repeatedly applied up to five times for a nearly complete epoxidation of cis‐cycloocten. The optimized experimental conditions were also used successfully for the epoxidation of some other alkenes, such as cyclohexene, styrene and α‐methyl styrene.