Spacer‐length‐dependent association in polymers with multiple‐hydrogen‐bonded end groups

Herein, we investigate the influence of spacer length on the homoassociation and heteroassociation of end‐functionalized hydrogen‐bonding polymers based on poly(n‐butyl acrylate). Two monofunctional ureido‐pyrimidinone (UPy) end‐functionalized polymers were prepared by atom transfer radical polymerization using self‐complementary UPy‐functional initiators that differ in the spacer length between the multiple‐hydrogen‐bonding group and the chain initiation site. The self‐complementary binding strength (K_dim) of these end‐functionalized polymers was shown to depend critically on the spacer length as evident from ¹H NMR and diffusion‐ordered spectroscopy. In addition, the heteroassociation strength of the end‐functionalized UPy polymers with end‐functionalized polymers containing the complementary 2,7‐diamido‐1,8‐naphthyridine (NaPy) hydrogen‐bond motif is also affected when the aliphatic spacer length is too short. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Sequential conversion of orthogonally functionalized diblock copolymers based on pentafluorophenyl esters

Statistic and block copolymers exhibiting activated ester side groups were synthesized by reversible addition‐fragmentation chain transfer polymerization in the presence of cumyl dithiobenzoate, benzyl dithiobenzoate, and 4‐cyano‐4‐((thiobenzoyl)sulfanyl)pentanoic acid as chain transfer agents. Pentafluorophenyl methacrylate and pentafluorophenyl 4‐vinylbenzoate were used to enable a sequential functionalization of the obtained copolymers by conversion of the activated esters with different amines. ¹H NMR spectroscopy, ¹⁹F NMR spectroscopy, and FTIR spectroscopy showed the successful step‐by‐step conversion of the different activated esters by aniline followed by aliphatic amines, thereby realizing a sequential functionalization of block copolymers with just one specific reactive group. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3683–3692, 2010     

Orthogonally functionalizable copolymers based on a novel reactive carbonate monomer

A novel N‐hydroxy succinimide‐based carbonate monomer that allows direct synthesis of polymers incorporating a reactive carbonate group in the side chain was synthesized. This new monomer was copolymerized with methyl methacrylate and poly(ethylene glycol) methylether methacrylate using free‐radical polymerization to obtain organo‐ and water‐soluble reactive copolymers. Copolymerization of the activated carbonate monomer with an azide‐containing monomer and N‐hydroxy succinimide‐containing activated ester monomer provided orthogonally functionalizable copolymers. The pendant reactive carbonate groups of the copolymers were functionalized with amines to obtain carbamates. Polymers capable of orthogonal functionalization could be selectively functionalized as desired using subsequent 1,3‐dipolar cycloaddition or amidation reactions. The novel monomer and the copolymers were characterized by ¹H‐NMR, ¹³C‐NMR, and infrared spectroscopy. The efficient stepwise orthogonal functionalization of the copolymers were examined via ¹H‐NMR spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

RAFT polymerization of activated 4‐vinylbenzoates

The reversible addition fragmentation chain transfer (RAFT) polymerization of five active ester monomers based on 4‐vinylbenzoic acid had been investigated. Pentafluorophenyl 4‐vinylbenzoate could be polymerized under RAFT conditions yielding polymers with very good control over molecular weight and narrow molecular weight distributions. Following the synthesis of diblock copolymers consisting of polystyrene, polypentafluorostyrene, poly(4‐octylstyrene), or poly(4‐acetoxystyrene) as an inert block and poly(pentafluorophenyl 4‐vinylbenzoate) as a reactive block was successfully performed. The diblock copolymer poly(pentafluoro styrene)‐block‐poly(pentafluorophenyl 4‐vinylbenzoate) had been analyzed by ¹⁹F NMR spectroscopy in solution, demonstrating the synthetic potential of pentafluorophenyl 4‐vinylbenzoate as an extremely valuable monomer for the synthesis of highly functionalized polymeric architectures. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1696–1705, 2009     

RAFT cryopolymerizations of N,N‐dimethylacrylamide and N‐isopropylacrylamide in moderately frozen aqueous solution

Aqueous reversible addition‐fragmentation chain transfer (RAFT) cryopolymerizations of N,N‐dimethylacrylamide (DMA) and N‐isopropylacrylamide (NIPAM) with potassium persulfate/sodium ascorbate as redox initiators were performed at ?15 °C. For the homopolymerizations, water‐soluble chain transfer agents (CTAs) of 2‐(1‐carboxy‐1‐methylethyl‐sulfanylthiocarbonylsulfanyl)‐2‐methylpropionic acid and 2‐dodecylsulfanylthiocarbonylsulfanyl‐2‐methylpropionyl‐capped methoxy poly(ethylene glycol) were used. For the sequential block copolymerizations, the obtained trithiocarbonate‐functionalized polymers were used as macro‐CTAs. Although well‐defined homo and block polymers of DMA and NIPAM were synthesized and these RAFT cryopolymerizations were well controlled, their behavior depended on the monomers and CTAs. The polymerization kinetic and polymer structure were studied by proton nuclear magnetic resonance analysis and gel permeation chromatography measurement. Poly(N,N‐dimethylacrylamide)‐based cryogels crosslinked with reductively cleavable disulfide‐containing diacrylamide, N,N′‐bisacryloylcystamine, were synthesized via RAFT cryopolymerization. Scanning electron microscopy observation revealed that the porous structure of cryogels depended on the CTA used. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Dendronized copolymers functionalized with crown ethers and their reversible modification through host–guest interaction

Crown ether‐functionalized dendronized copolymers with an alternating structure were synthesized by free radical copolymerization of styrene derivatives pendent with Percec‐type polyether dendron of two generations and maleimide pendent with dibenzo[24]crown‐8 (24C8). Novel dendronized copolymers bearing tremendous host molecular cavities have been characterized by ¹H NMR, ¹³C NMR spectroscopy, static light scattering (SLS), and differential scanning calorimetry (DSC) analysis as well as atomic force microscopy (AFM) techniques. Host–guest interactions between 24C8 units dispersed along the dendronized copolymers and organic ammonium salts of pyrene, anthracene, and phenol have been explored. These molecular recognition processes can be monitored by ¹H NMR spectroscopy and fluorescence excitation spectroscopy. These results showed that the supramolecular polymer systems are acid–base controllable, demonstrating that dendronized copolymers may be modified reversibly via host–guest interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of well‐defined rod‐coil block copolymers containing trifluoromethylated poly(phenylene oxide)s by chain‐growth condensation polymerization and atom transfer radical polymerization

Well‐defined trifluoromethylated poly(phenylene oxide)s were synthesized via nucleophilic aromatic substitution (S_NAr) reaction by a chain‐growth polymerization manner. Polymerization of potassium 4‐fluoro‐3‐(trifluoromethyl)phenolate in the presence of an appropriate initiator yielded polymers with molecular weights of ～4000 and polydispersity indices of <1.2, which were characterized by ¹H nuclear magnetic resonance spectroscopy and gel permeation chromatography. Initiating sites for atom transfer radical polymerization (ATRP) were introduced at the either side of chain ends of the poly(phenylene oxide), and used for ATRP of styrene and methyl methacrylate, yielding well‐defined rod‐coil block copolymers. Differential scanning calorimetry study indicated that the well‐defined trifluoromethylated poly(phenylene oxide)s showed high crystallinity and were immiscible with polystyrene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1049–1057, 2010     

Self‐assembly and morphology of polydimethylsiloxane supramolecular thermoplastic elastomers

Functionalization of polydimethylsiloxanes (PDMS) polymers with hydrogen‐bonding ureidopyrimidinone (UPy) groups leads to supramolecular thermoplastic elastomers. In previous studies, no lateral stacking of UPy dimers was observed in UPy‐functionalized polymers, unless additional urethane or urea groups were built into the hard block. However, we have shown that when PDMS is used as the soft block, this lateral aggregation of UPy dimers does take place, since long fibers could be observed in the atomic force microscopy (AFM) phase image. Also in bulk, the presence of these interactions was proven by oscillatory shear experiments. We attribute this aggregation to the incompatibility of soft block and hard block, leading to phase separation. Moreover, we have shown that additional urethane or urea groups in the hard block do lead to materials with more fibers and higher melting points. For the UPy‐urea functionalized PDMS even single fibers are observed with AFM when dropcasted from a very diluted solution. When the length of the soft block is increased, the morphology changes from fibrous to spherical. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3877–3885, 2008     

Facilitating polymer conjugation via combination of RAFT polymerization and activated ester chemistry

The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via ¹H and ¹³C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Cyclic homo and block copolymers through sequential double click reactions

Well‐defined linear α‐anthracene‐ω‐maleimide functionalized polystyrene (l‐Anth‐PS‐MI) and linear α‐alkyne‐ω‐maleimide functionalized poly(tert‐butyl acrylate) (l‐alkyne‐PtBA‐MI) homopolymers, and linear α‐anthracene‐ω‐maleimide functionalized PS‐b‐PtBA (l‐Anth‐PS‐b‐PtBA‐MI) and linear α‐anthracene‐ω‐maleimide functionalized PS‐b‐poly(ε‐caprolactone) (PCL) (l‐Anth‐PS‐b‐PCL‐MI) block copolymers were obtained via combination of atom transfer radical polymerization (ATRP)/ring opening polymerization (ROP) and azide‐alkyne click reaction strategy. Subsequently, these linear homo and block copolymers were efficiently clicked via Diels‐Alder reaction to give their corresponding cyclic homo and block copolymers at reflux temperature of toluene for 48 h under 7–4 × 10^?5 M conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Block copolymers of poly(ethylene oxide) and poly(vinyl alcohol) synthesized by the RAFT methodology

A methodology for the synthesis of well‐defined poly(ethylene oxide)‐block‐poly(vinyl alcohol) (PEO‐b‐PVA) and PVA‐b‐PEO‐b‐PVA polymers was reported. Novel xanthate end‐functionalized PEOs were synthesized by a series of end‐group transformations. They were then used to mediate the reversible addition–fragmentation chain transfer polymerization of vinyl acetate to obtain well‐defined poly(ethylene oxide)‐b‐poly(vinyl acetate) (PEO‐b‐PVAc) and PVAc‐b‐PEO‐b‐PVAc. When these block copolymers were directly hydrolyzed in methanol solution of sodium hydroxide, polymers with brown color were obtained, which was due to the formation of conjugated unsaturated aldehyde structures. To circumvent these side reactions, the xanthate groups were removed by adding a primary amine before hydrolysis and the products thus obtained were white powders. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy and FT‐IR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1901–1910, 2009     

Consequences of Block Sequence on the Orthogonal Folding of Triblock Copolymers

ABA‐ and BAB‐type triblock copolymers possessing pendant, self‐assembling motifs in the A and B blocks were synthesized, with 2‐ureidopyrimidinone (UPy) and benzene‐1,3,5‐tricarboxamide (BTA) for the A and B block, respectively. They were investigated to assess if and how the polymer’s microstructure influences the self‐assembly behavior of the supramolecular motifs and, as a result, the single‐chain folding process. BAB‐type triblock copolymers were synthesized via atom transfer radical polymerization (ATRP) with molecular weights ranging from 30 to 120 kg mol^?1; the BTA and UPy motifs were attached using a post‐functionalization approach. The ABA‐type triblock copolymers were available from previous work. In highly dilute solutions, both types of triblock copolymers fold into single‐chain polymeric nanoparticles (SCPNs) via thermally induced BTA self‐assembly and photo‐triggered UPy dimerization. Chain collapse induced by intramolecular UPy dimerization was evaluated using size‐exclusion chromatography (SEC). The BTA self‐assembly was monitored by circular dichroism (CD) spectroscopy. The microstructures of SCPNs were visualized by atomic force microscopy (AFM). SEC analysis indicated a more loose packing for the BAB‐type folded nanoparticles than for the ABA‐type ones, which implies that topological differences in the polymer architecture do affect the folding behavior, although only slightly. The facile synthetic protocol developed here provides topologically different triblock architectures and opens up the area for single‐chain folding technology that is applicable in artificial enzymatic systems with compartmentalized domains.     

Synthesis of poly(vinylidene fluoride)‐b‐poly(styrene sulfonate) block copolymers by controlled radical polymerizations

Block copolymers based on poly(vinylidene fluoride), PVDF, and a series of poly(aromatic sulfonate) sequences were synthesized from controlled radical polymerizations (CRPs). According to the aromatic monomers, appropriate techniques of CRP were chosen: either iodine transfer polymerization (ITP) or atom transfer radical polymerization (ATRP) from PVDF‐I macromolecular chain transfer agents (CTAs) or PVDF‐CCl₃ macroinitiator, respectively. These precursors were produced either by ITP of VDF with C₆F₁₃I or by radical telomerization of VDF with chloroform, respectively. Poly(vinylidene fluoride)‐b‐poly(sodium styrene sulfonate), PVDF‐b‐PSSS, block copolymers were produced from both techniques via a direct polymerization of sodium styrene sulfonate (SSS) monomer or an indirect way with the use of styrene sulfonate ethyl ester (SSE) as a protected monomer. Although the reaction led to block copolymers, the kinetics of ITP of SSS showed that PVDF‐I macromolecular CTAs were not totally efficient because a limitation of the CTA consumption (56%) was observed. This was probably explained by both the low activity of the CTA (that contained inefficient PVDF‐CF₂CH₂? I) and a fast propagation rate of the monomer. That behavior was also noted in the ITP of SSE. On the other hand, ATRP of SSS initiated by PVDF‐CCl₃ was more controlled up to 50% of conversion leading to PVDF‐b‐PSSS block copolymer with an average number molar mass of 6000 g·mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Sequential and localized grafting on aliphatic polyester diblock copolymers using alkyne deprotection and click cycloaddition

Diblock copolymers, in which both blocks are composed of aliphatic polyesters, were synthesized from two different alkyne‐functionalized δ‐valerolactone monomers by ring opening polymerization and subsequent click cycloaddition. Trimethylsilyl protection of the alkyne functionality of one block was instrumental to the success of the synthesis. These novel aliphatic polyester diblock copolymers were characterized by ¹H and ¹³C NMR spectroscopy, gel permeation chromatography (GPC), and infrared (IR) spectroscopy. Sequential functionalization of the diblock copolymers with hydrophobic groups on one block, and hydrophilic groups on the other block, provides access to amphiphilic structures. Micellar structures generated from these polyester amphiphiles were characterized by fluorescence spectroscopy and transition electron microscopy (TEM). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Thermoresponsive micelles from well‐defined block copolymers synthesized via reversible addition–fragmentation chain transfer polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm) homopolymers synthesized by reversible addition–fragmentation chain transfer polymerization were used as macro‐chain‐transfer agents to synthesize smart amphiphilic block copolymers with a switchable hydrophilic–hydrophobic block of PNIPAAm and a hydrophilic block of poly(N‐dimethylacrylamide). All polymers were characterized by gel permeation chromatography, ¹H NMR, and differential scanning calorimetry. The reversible micelles formed by the block copolymers of various compositions in aqueous solutions were characterized by ¹H NMR, dynamic light scattering, and tensiometry. Micelles were observed in the aqueous solutions when the temperature was increased to 40 °C because of the collapse of the PNIPAAm structure, which led to a PNIPAAm hydrophobic block. The drug loading capacity was illustrated with the use of the solvatochromic Reichardt's dye and measured by ultraviolet–visible. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3643–3654, 2005     

Synthesis of orthogonally addressable block copolymers via reversible addition fragmentation chain transfer polymerization and subsequent chemoselective postmodification

This article describes the synthesis of bifunctional block copolymers (BCPs) of type 4 bearing orthogonally reactive backbone substituents such as 1,1,1,3,3,3‐hexafluoroisopropoxycarbonyl groups as active esters and α‐hydroxyalkylphenylketones (2‐hydroxy‐2‐methyl‐1‐phenylpropan‐1‐one) as additional photoactive moieties via reversible addition fragmentation chain transfer (RAFT) polymerization. As monomers 1,1,1,3,3,3‐hexafluoroisopropyl acrylate (HFIPA) and 2‐hydroxy‐2‐methyl‐1‐(4‐vinyl)phenylpropan‐1‐one (HAK) are used. Controlled radical polymerization provides BCPs p(HFIPA)‐b‐p(HAK) with molecular weights (M_n) ranging from 15,000 to 37,000 g mol^?1 and low molecular weight distributions (PDI = 1.2–1.4). The incorporated HFIPA and HAK moieties are used for sequential chemoselective postmodification of 4 . The photoactive block of 4 can be functionalized through a nitroxide photoclick trapping reaction in the presence of functionalized nitroxides and the active ester moieties of the p(HFIPA)‐block are readily thermally amidated using various amines. Chemically modified polymers are characterized by NMR, FTIR, and GPC methods which reveal a high degree of postfunctionalization, typically >95% for both orthogonal processes. The chemically modified polymers feature a narrow molecular weight distribution. The process is successfully applied to the synthesis of a small polymer library and also to the preparation of homo and block polynitroxides using 4‐amino‐TEMPO as amine component in the transamidation reaction. The polynitroxides obtained are characterized by cyclic voltammetry, FTIR, and UV–vis spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 52, 258–266     

Supramolecular star polymers with compositional heterogeneity

We present the synthesis of supramolecular star polymers with heterogeneous chemical compositions through potassium cation‐templated assembly of guanosine end‐functionalized random, diblock, and Y‐shaped copolymers. The assembly and disassembly processes of the synthesized star polymers have been systematically examined on changing the concentration, the temperature, the solvent, and the amount of cation using ¹H NMR, UV/vis, and CD spectroscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Graft copolymers via ROMP and Diels–Alder click reaction strategy

Anthracene‐functionalized oxanorbornene monomer and oxanorbornenyl polystyrene (PS) with ω‐anthracene end‐functionalized macromonomer were first polymerized via ring‐opening metathesis polymerization using the first‐generation Grubbs' catalyst in dichloromethane at room temperature and then clicked with maleimide end‐functionalized polymers, poly(ethylene glycol) (PEG)‐MI, poly(methyl methacrylate) (PMMA)‐MI, and poly(tert‐butyl acrylate) (PtBA)‐MI in a Diels–Alder reaction in toluene at 120 °C to create corresponding graft copolymers, poly(oxanorbornene)‐g‐PEG, poly(oxanorbornene)‐g‐PMMA, and graft block copolymers, poly(oxanorbornene)‐g‐(PS‐b‐PEG), poly(oxanorbornene)‐g‐(PS‐b‐PMMA), and poly(oxanorbornene)‐g‐(PS‐b‐PtBA), respectively. Diels–Alder click reaction efficiency for graft copolymerization was monitored by UV–vis spectroscopy. The dn/dc values of graft copolymers and graft block copolymers were experimentally obtained using a triple detection gel permeation chromatography and subsequently introduced to the software so as to give molecular weights, intrinsic viscosity ([η]) and hydrodynamic radius (R_h) values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Antimicrobial peptide modification of biomaterials using supramolecular additives

Biomaterials based on non‐active polymers functionalized with antimicrobial agents by covalent modification or mixing are currently regarded as high potential solutions to prevent biomaterial associated infections that are major causes of biomedical device failure. Herewith a strategy is proposed in which antimicrobial materials are prepared by simply mixing‐and‐matching of ureido‐pyrimidinone (UPy) based supramolecular polymers with antimicrobial peptides (AMPs) modified with the same UPy‐moiety. The N‐terminus of the AMPs was coupled in solution to an UPy‐carboxylic acid synthon resulting in formation of a new amidic bond. The UPy‐functionalization of the AMPs did not affect their secondary structure, as proved by circular dichroism spectroscopy. The antimicrobial activity of the UPy‐AMPs in solution was also retained. In addition, the incorporation of UPy‐AMPs into an UPy‐polymer was stable and the final material was biocompatible. The addition of 4 mol % of UPy‐AMPs in the UPy‐polymer material protected against colonization by Escherichia coli, and methicillin‐sensitive and ‐resistant strains of Staphylococcus aureus. This modular approach enables a stable but dynamic incorporation of the antimicrobial agents, allowing at the same time for the possibility to change the nature of the polymer, as well as the use of AMPs with different activity spectra. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1926–1934     

Synthesis and characterizations of new isotactic homopolyesters,statistical and block copolyesters derived of poly((S)‐3,3‐dimethylmalic acid) via the lactone route

This article presents the synthesis of a new family of synthetic isotactic polyesters derived from poly((S)‐3,3‐dimethylmalic acid) (PDMMLA). These polyesters are prepared via the lactone route bearing functionalized groups in its main or side chain. The aim of this work is twofold: metabolism and stereochemistry. First, the synthesis of these new polyesters is chosen to provide biodegradable polyesters biocompatible and bioassimilable by the human body. Next, the molecular chain of this family contains a stereogenic center in the aim to provide 100% isotactic homopolymers and copolymers (statistical and block). Finally, these polymers have been characterized by several analytical techniques: FTIR, ¹H and ¹³C NMR, SEC, DSC, and TGA. The greatest importance will be given to the ¹³C NMR and DSC to principally confirm the stereoregularity and crystallinity of these stereopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1495–1507