Nicotine,acetanilide and urea multi‐level 2H‐, 13C‐ and 15N‐abundance reference materials for continuous‐flow isotope ratio mass spectrometry

Accurate determinations of stable isotope ratios require a calibration using at least two reference materials with different isotopic compositions to anchor the isotopic scale and compensate for differences in machine slope. Ideally, the δ values of these reference materials should bracket the isotopic range of samples with unknown δ values. While the practice of analyzing two isotopically distinct reference materials is common for water (VSMOW‐SLAP) and carbonates (NBS 19 and L‐SVEC), the lack of widely available organic reference materials with distinct isotopic composition has hindered the practice when analyzing organic materials by elemental analysis/isotope ratio mass spectrometry (EA‐IRMS). At present only L‐glutamic acids USGS40 and USGS41 satisfy these requirements for δ¹³C and δ¹⁵N, with the limitation that L‐glutamic acid is not suitable for analysis by gas chromatography (GC). We describe the development and quality testing of (i) four nicotine laboratory reference materials for on‐line (i.e. continuous flow) hydrogen reductive gas chromatography‐isotope ratio mass‐spectrometry (GC‐IRMS), (ii) five nicotines for oxidative C, N gas chromatography‐combustion‐isotope ratio mass‐spectrometry (GC‐C‐IRMS, or GC‐IRMS), and (iii) also three acetanilide and three urea reference materials for on‐line oxidative EA‐IRMS for C and N. Isotopic off‐line calibration against international stable isotope measurement standards at Indiana University adhered to the ‘principle of identical treatment’. The new reference materials cover the following isotopic ranges: δ²H_nicotine ?162 to ?45‰, δ¹³C_nicotine ?30.05 to +7.72‰, δ¹⁵N_nicotine ?6.03 to +33.62‰; δ¹⁵N_acetanilide +1.18 to +40.57‰; δ¹³C_urea ?34.13 to +11.71‰, δ¹⁵N_urea +0.26 to +40.61‰ (recommended δ values refer to calibration with NBS 19, L‐SVEC, IAEA‐N‐1, and IAEA‐N‐2). Nicotines fill a gap as the first organic nitrogen stable isotope reference materials for GC‐IRMS that are available with different δ¹⁵N values. Comparative δ¹³C and δ¹⁵N on‐line EA‐IRMS data from 14 volunteering laboratories document the usefulness and reliability of acetanilides and ureas as EA‐IRMS reference materials. Published in 2009 by John Wiley & Sons, Ltd.     

Analysing the isotopic life history of the alpine ungulates Capra ibex and Rupicapra rupicapra rupicapra through their horns

The horn of ungulate grazers offers a valuable isotopic record of their diet and environment. However, there have been no reports of the spatio‐temporal variation of the isotopic composition of horns. We investigated patterns of carbon (δ¹³C) and nitrogen (δ¹⁵N) isotopic composition along and perpendicular to the horn axis in Capra ibex and Rupicapra rupicapra rupicapra to assess the effects of animal age, within‐year (seasonal) and inter‐annual variation, natural contamination and sampling position on horn isotope composition. Horns of male C. ibex (n = 23) and R. r. rupicapra (n = 1) were sampled longitudinally on the front (only R. r. rupicapra) and back side and on the surface and sub‐surface. The sides of the R. r. rupicapra horn did not differ in δ¹³C. In both species, the horn surface had a 0.15‰ lower δ¹³C and a higher carbon‐to‐nitrogen (C/N) ratio than the sub‐surface. Washing the horn with water and organic solvents removed material that caused these differences. With age, the δ¹⁵N of C. ibex horns increased (+0.1‰ year^?1), C/N ratio increased, and ¹³C discrimination relative to atmospheric CO₂ (¹³Δ) increased slightly (+0.03‰ year^?1). Geostatistical analysis of one C. ibex horn revealed systematic patterns of inter‐annual and seasonal ¹³C changes, but ¹⁵N changed only seasonally. The work demonstrates that isotopic signals in horns are influenced by natural contamination (δ¹³C), age effects (¹³Δ and δ¹⁵N), and seasonal (δ¹³C and δ¹⁵N) and inter‐annual variation (δ¹³C). The methods presented allow us to distinguish between these effects and thus allow the use of horns as isotopic archives of the ecology of these species and their habitat. Copyright © 2009 John Wiley & Sons, Ltd.     

Geographical traceability of wheat and its products using multielement light stable isotopes coupled with chemometrics

The present study was aimed to investigate the variation of stable isotopic ratios of carbon, nitrogen, hydrogen, and oxygen in wheat kernel along with different processed fractions from three geographical origins across 5 years using isotope ratio mass spectrometry (IRMS). Multiway ANOVA revealed significant differences among region, harvest year, processing, and their interactions for all isotopes. The region contributed the major variability in the δ¹³C ‰, δ²H ‰, δ¹⁵N ‰, and δ¹⁸O‰ values of wheat. Variation of δ¹³C ‰, δ¹⁵N ‰, and δ¹⁸O ‰ between wheat whole kernel and its products (break, reduction, noodles, and cooked noodles) were ?0.7‰, and no significant difference was observed, suggesting the reliability of these isotope fingerprints in geographical traceability of wheat‐processed fractions and foods. A significant influence of wheat processing was observed for δ²H values. By applying linear discriminant analysis (LDA) to the whole dataset, the generated model correctly classified over 91% of the samples according to the geographical origin. The application of these parameters will assist in the development of an analytical control procedure that can be utilized to control the mislabeling regarding geographical origin of wheat kernel and its products.     

13C/12C isotope labeling to study carbon partitioning and dark respiration in cereals subjected to water stress

Despite the relevance of carbon (C) loss through respiration processes (with its consequent effect on the lower C availability for grain filling), little attention has been given to this topic. Literature data concerning the role of respiration in cereals are scarce and these have been produced using indirect methods based on gas‐exchange estimations. We have developed a new method based on the capture of respired CO₂ samples and their analysis by gas chromatography‐combustion‐isotope ratio mass spectrometry (GC‐C‐IRMS). In order to analyse the main processes involved in the C balance during grain filling (photosynthesis, respiration, allocation and partitioning) the ambient isotopic ¹³C/¹²C composition (δ¹³C) of the growth chamber was modified during this period (δ¹³C ca. ?12.8 ± 0.3‰ to ca. ?20.0 ± 0.2‰). The physiological performance, together with the C allocation on total organic matter (TOM) and respiration of wheat (Triticum aestivum L., var. Califa sur) and two hybrids, tritordeum (X Tritordeum Asch. & Graebn line HT 621) and triticale (X Triticosecale Wittmack var. Imperioso), were compared during post‐anthesis water stress. In spite of the larger ear DM/total ratio, especially under drought conditions, the grain filling of triticale and wheat was mainly carried out with pre‐anthesis C, while the majority of C assimilated during post‐anthesis was invested in respiration processes. In the case of wheat and tritordeum, the C balance data suggested a reallocation during grain filling of photoassimilates stored prior to anthesis from shoot to ear. Furthermore, the lower percentage of labeled C on respired CO₂ of droughted tritordeum plants, together with the lower plant biomass, explained the fact that those plants had more C available for grain filling. Copyright © 2009 John Wiley & Sons, Ltd.     

Simultaneous determination of δ15N and δ18O of N2O and δ13C of CH4 in nanomolar quantities from a single water sample

We have developed a rapid, sensitive, and automated analytical system to simultaneously determine the concentrations and stable isotopic compositions (δ¹⁵N, δ¹⁸O, and δ¹³C) of nanomolar quantities of nitrous oxide (N₂O) and methane (CH₄) in water, by combining continuous‐flow isotope‐ratio mass spectrometry and a helium‐sparging system to extract and purify the dissolved gases. Our system, which is composed of cold traps and a capillary gas chromatograph that use ultra‐pure helium as the carrier gas, achieves complete extraction of N₂O and CH₄ in a water sample and separation among N₂O, CH₄, and the other component gases. The flow path following exit from the gas chromatograph was periodically changed to pass the gases through the combustion furnace to convert CH₄ and the other hydrocarbons into CO₂, or to bypass the combustion furnace for the direct introduction of eluted N₂O into the mass spectrometer, for determining the stable isotopic compositions through monitoring the ions of m/z 44, 45, and 46 of CO and N₂O⁺. The analytical system can be operated automatically with sequential software programmed on a personal computer. Analytical precisions better than 0.2‰ and 0.3‰ and better than 1.4‰ and 2.6‰ were obtained for the δ¹⁵N and δ¹⁸O of N₂O, respectively, when more than 6.7 nmol and 0.2 nmol of N₂O, respectively, were injected. Simultaneously, analytical precisions better than 0.07‰ and 2.1‰ were obtained for the δ¹³C of CH₄ when more than 5.5 nmol and 0.02 nmol of CH₄, respectively, were injected. In this manner, we can simultaneously determine stable isotopic compositions of a 120 mL water sample with concentrations as low as 1.7 nmol/kg for N₂O and 0.2 nmol/kg for CH₄. Copyright © 2010 John Wiley & Sons, Ltd.     

The hydrological response of heavy clay grassland soils to rainfall in south‐west England using δ2H

Stable isotopes of water have been previously used in catchment studies to separate rain‐event water from pre‐event groundwater. However, there are a lack of studies at the smaller scale looking at the separation of event water from pre‐event water. This is particularly relevant for heavy clay soil systems through which the movement of water is uncertain but is thought to be rainwater‐dominated. The data presented here were collected at a rural site in the south‐west of England. The historic rainfall at the site was isotopically varied but similar to the global meteoric water line, with annual weighted means of ?37‰ for δ²H and ?5.7‰ for δ¹⁸O and with no seasonal variation. Drainage was sampled from the inter‐flow (surface runoff + lateral through‐flow) and drain‐flow (55 cm deep mole drains) pathways of two 1 ha lysimeters during two rainfall events, which had δ²H values of ?68‰ and ?92‰, respectively. The δ²H values of the lysimeter drainage water suggest that there was no contribution of event water during the first, small discharge (Q) event; however, the second larger event did show isotopic variation in δ²H values negatively related to Q indicating that rainwater was contributing to Q. A hydrograph separation indicated that only 49–58% of the inter‐flow and 18–25% of the drain‐flow consisted of event water. This was surprising given that these soil types are considered retentive of soil water. More work is needed on heavy clay soils to understand better the nature of water movement from these systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Consistent predictable patterns in the hydrogen and oxygen stable isotope ratios of animal proteins consumed by modern humans in the USA

Published datasets of proteinaceous animal tissues suggest that co‐variation between amino acid hydrogen (δ²H) and oxygen (δ¹⁸O) isotope ratios is a common feature in systems where isotopic variation is driven by geographic or temporal variation in the δ²H and δ¹⁸O values of environmental water. This has led to the development of models relating tissue δ²H and δ¹⁸O values to those of water, with potential application in a number of fields. However, the strength and ubiquity of the influence of environmental water on protein isotope ratios across taxonomic groups, and thus the relevance of predictive models, is an open question. Here we report strong co‐variation of δ²H and δ¹⁸O values across a suite of terrestrial and aquatic animal meats purchased in American food markets, including beef, poultry (chicken and turkey), chicken eggs, pork, lamb, freshwater fish, and marine fish. Significant isotope co‐variation was not found for small collections of marine bivalves and crustaceans. These results imply that isotopic signals from environmental water were propagated similarly through most of the diverse natural and human‐managed foodwebs represented by our samples. Freshwater fish had the largest variation in δ²H and δ¹⁸O values, with ranges of 121 ‰ and 19.2 ‰, respectively, reflecting the large isotopic variation in environmental freshwaters. In contrast marine animals had the smallest variation for both δ²H (7 ‰ range, crustaceans) and δ¹⁸O (3.0 ‰ range, bivalves) values. Known‐origin beef samples demonstrated direct relationships between the variance of environmental water isotope ratios and that of collected meats. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparison of the silver nitrate and bacterial denitrification methods for the determination of nitrogen and oxygen isotope ratios of nitrate in surface water

Nitrogen (N) and oxygen (O) isotope ratios of NO are often used to trace dominant NO pollution sources in water. Both the silver nitrate (AgNO₃) method and the bacterial denitrification method are frequently used analytical techniques to determine δ¹⁵N‐ and δ¹⁸O‐NO in aqueous samples. The AgNO₃ method is applicable for freshwater and requires a concentration of 100–200 µmol of NO for isotope determination. The bacterial denitrification method is applicable for seawater and freshwater and for KCl extracts of soils with a NO concentration as low as 1 µmol. We have carried out a thorough method comparison using 42 real surface water samples having a wide range of δ¹⁵N‐ and δ¹⁸O‐NO values and NO concentrations. Various correction pairs using three international references and blanks were used to correct raw δ¹⁵N‐ and δ¹⁸O‐NO values. No significant difference between the corrected data was observed when using various correction pairs for each analytical method. Both methods also showed excellent repeatability with high intraclass correlation coefficients (ICC). The ICC of the AgNO₃ method was 0.992 for δ¹⁵N and 0.970 for δ¹⁸O. The ICC of the bacterial denitrification method was 0.995 for δ¹⁵N and 0.954 for δ¹⁸O. Moreover, a positive linear relationship with a high correlation coefficient (r ≥ 0.88) between the two methods was found for δ¹⁵N‐ and δ¹⁸O‐NO. The comparability of the methods was assessed by the Bland‐Altman technique using 95% limits of agreement. The average difference between results obtained by the bacterial denitrification and the AgNO₃ method for δ¹⁵N was ?1.5‰ with 95% limits of agreement ?3.6 and +0.5‰. For δ¹⁸O this was +2.0‰, with 95% limits of agreement ?3.3 and +7.3‰. We found that for δ¹⁵N and for δ¹⁸O, 97% of the differences fell within these 95% limits of agreement. In conclusion, the AgNO₃ and the bacterial denitrification methods are highly correlated and statistically interchangeable. Copyright © 2010 John Wiley & Sons, Ltd.     

Simultaneous δ15N, δ13C and δ34S measurements of low‐biomass samples using a technically advanced high sensitivity elemental analyzer connected to an isotope ratio mass spectrometer

Conventional simultaneous CNS stable isotope abundance measurements of solid samples usually require high sample amounts, up to 1 mg carbon, to achieve exact analytical results. This rarely used application is often impaired by high C:S element ratios when organic samples are analyzed and problems such as incomplete conversion into sulphur dioxide occur during analysis. We introduce, as a technical innovation, a high sensitivity elemental analyzer coupled to a conventional isotope ratio mass spectrometer, with which CNS‐stable isotope ratios can be determined simultaneously in samples with low carbon content (<40 µg C corresponding to ～100 µg dry weight). The system includes downsized reactors, a temperature program‐controlled gas chromatography (GC) column and a cryogenic trap to collect small amounts of sulphur dioxide. This modified application allows for highly sensitive measurements in a fully automated operation with standard deviations better than ±0.47‰ for δ¹⁵N and δ³⁴S and ±0.12‰ for δ¹³C (n = 127). Samples collected from one sampling site in a Baltic fjord within a short time period were measured with the new system to get a first impression of triple stable isotope signatures. The results confirm the potential of using δ³⁴S as a stable isotope tracer in combination with δ¹⁵N and δ¹³C measurements to improve discrimination of food sources in aquatic food webs. Copyright © 2009 John Wiley & Sons, Ltd.     

Coupled N,C and S stable isotope measurements using a dual‐column gas chromatography system

Many laboratories routinely analyze plant, animal and soil samples with elemental analyzers coupled to isotope ratio mass spectrometers, obtaining rapid results for nitrogen (%N, δ¹⁵N) and carbon (%C, δ¹³C) from the same sample. The coupled N and C measurements are possible because of a gas chromatography (GC) separation of N₂ and CO₂ gases produced in elemental analysis. Adding a second GC column allows additional measurement of sulfur (%S, δ³⁴S) from the same sample, so that combined N, C and S information is obtained routinely. Samples are 1–15 mg, and replicates generally differ by less than 0.1‰ for δ¹⁵N, δ¹³C or δ³⁴S. An example application shows that the N, C, and S measurement system allows a three‐dimensional view of element dynamics in estuarine systems that are undergoing pollution inputs from upstream watersheds. Extension of these GC principles should allow coupled H, C, N, and S isotope measurements in future work. Copyright © 2007 John Wiley & Sons, Ltd.     

Metabolic turnover rates of carbon and nitrogen stable isotopes in captive juvenile snakes

Metabolic turnover rates (m) of δ¹⁵N and δ¹³C were assessed in different tissues of newly hatched captive‐raised corn snakes (Elaphe guttata guttata) fed maintenance diets consisting of earthworms (Eisenia foetida) that varied substantially in δ¹⁵N (by 644‰) and δ¹³C (by 5.0‰). Three treatments were used during this 144 day experiment that consisted of the same diet throughout (control), shifting from a depleted to an enriched stable isotope signature diet (uptake), and shifting from an enriched to depleted stable isotope signature diet (elimination). Values of δ¹³C in the liver, blood, and muscle of the control snakes reached equilibrium with and were, respectively, 1.73, 2.25 and 2.29 greater than in their diet, this increase is called an isotopic discrimination factor (Δδ¹³C = δ¹³C_snake ? δ¹³C_food). Values of δ¹⁵N in snake tissues did not achieve equilibrium with the diets in any of the exposures and thus Δ¹⁵N could not be estimated. Values of metabolic turnover rates (m) for δ¹³C and δ¹⁵N were greater in liver than in muscle and blood, which were similar, and relative results remained the same if the fraction of ¹⁵N and ¹³C were modeled. Although caution is warranted because equilibrium values of stable isotopes in the snakes were not achieved, values of m were greater for δ¹³C than δ¹⁵N, resulting in shorter times to dietary equilibrium for δ¹³C upon a diet shift, and for both stable isotopes in all tissues, greater during an elimination than in an uptake shift in diet stable isotope signature. Multiple explanations for the observed differences between uptake and elimination shifts raise new questions about the relationship between animal and diet stable isotope concentrations. Based on this study, interpretation of feeding ecology using stable isotopes is highly dependent on the kind of stable isotope, tissue, direction of diet switch (uptake versus elimination), and the growth rate of the animal. Copyright © 2009 John Wiley & Sons, Ltd.     

Online high‐precision δ2H and δ18O analysis in water by pyrolysis

A method for online simultaneous δ²H and δ¹⁸O analysis in water by high‐temperature conversion is presented. Water is injected by using a syringe into a high‐temperature carbon reactor and converted into H₂ and CO, which are separated by gas chromatography (GC) and carried by helium to the isotope ratio mass spectrometer for hydrogen and oxygen isotope analysis. A series of experiments was conducted to evaluate several issues such as sample size, temperature and memory effects. The δ²H and δ¹⁸O values in multiple water standards changed consistently as the reactor temperature increased from 1150 to 1480°C. The δ¹⁸O in water can be measured at a lower temperature (e.g. 1150°C) although the precision was relatively poor at temperatures <1300°C. Memory effects exist for δ²H and δ¹⁸O between two waters, and can be reduced (to <1%) with proper measures. The injection of different amounts of water may affect the isotope ratio results. For example, in contrast to small injections (100 nL or less) from small syringes (e.g. 1.2 µL), large injections (1 µL or more) from larger syringes (e.g. 10 µL) with dilution produced asymmetric peaks and shifts of isotope ratios, e.g. 4‰ for δ²H and 0.4‰ for δ¹⁸O, probably resulting from isotope fractionation during dilution via the ConFlo interface. This method can be used to analyze nanoliter samples of water (e.g. 30 nL) with good precision of 0.5‰ for δ²H and 0.1‰ for δ¹⁸O. This is important for geosciences; for instance, fluid inclusions in ancient minerals may be analyzed for δ²H and δ¹⁸O to help understand the formation environments. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of Vegetables by Stable Isotopic and Elemental Signatures

ABSTRACT

109 Romanian parsley, celery and parsnip root, cucumber, vegetable marrow, onion, and pepper samples were characterized by their stable isotope ratios and elemental concentrations in comparison to imported varieties. Organic and conventional agriculture practices were also compared as well as a differentiation between eggplant and peppers grown in greenhouses and those in the field. δ²H values were between ?70.8 and 5.6‰, while the δ¹⁸O values were between ?9.0 and 4.1‰. The δ¹⁵N values for white onions were from 2.8 to 11.1‰. For Romanian organic onions, the carbon isotopic values were lower (?29.2 to ?28.2‰) compared to conventional onions from other countries (?27.8‰ to ?23.8%). Linear discriminant analysis was used to characterize agricultural practices and the geographic origin of the vegetables.     

Reconstructing bulk isotope ratios from compound‐specific isotope ratios

Carbon isotope analysis by bulk elemental analysis coupled with isotope ratio mass spectrometry has been the mainstay of δ¹³C analyses both at natural abundance and in tracer studies. More recently, compound‐specific isotope analysis (CSIA) has become established, whereby organic constituents are separated online by gas or liquid chromatography before oxidation and analysis of CO₂ for constituent δ¹³C. Theoretically, there should be concordance between bulk δ¹³C measurements and carbon‐weighted δ¹³C measurements of carbon‐containing constituents. To test the concordance between the bulk and CSIA, fish oil was chosen because the majority of carbon in fish oil is in the triacylglycerol form and ～95% of this carbon is amenable to CSIA in the form of fatty acids. Bulk isotope analysis was carried out on aliquots of oil extracted from 55 fish samples and δ¹³C values were obtained. Free fatty acids (FFAs) were produced from the oil samples by saponification and derivatised to fatty acid methyl esters (FAMEs) for CSIA by gas chromatography/combustion/isotope ratio mass spectrometry. A known amount of an internal standard (C15:0 FAME) was added to allow analyte quantitation. This internal standard was also isotopically calibrated in both its FFA (δ¹³C = ?34.30‰) and FAME (δ¹³C = ?34.94‰) form. This allowed reporting of FFA δ¹³C from measured FAME δ¹³C values. The bulk δ¹³C was reconstructed from CSIA data based on each FFA δ¹³C and the relative amount of CO₂ produced by each analyte. The measured bulk mean δ¹³C (SD) was ?23.75‰ (1.57‰) compared with the reconstructed bulk mean δ¹³C of ?23.76 (1.44‰) from CSIA and was not significantly different. Further analysis of the data by the Bland‐Altman method did not show particular bias in the data relative to the magnitude of the measurement. Good agreement between the methods was observed with the mean difference between methods (range) of 0.01‰ (?1.50 to 1.30). Copyright © 2010 John Wiley & Sons, Ltd.     

Hydrogen and oxygen isotopes of water from inclusions in minerals: design of a new crushing system and on‐line continuous‐flow isotope ratio mass spectrometric analysis

An analytical line for stable isotope analyses of water recovered from fluid inclusions in minerals was built and successfully tested. The line is based on the principle of continuous‐flow analysis of water via high‐temperature reduction on glassy carbon. It includes a custom‐designed set of high‐efficiency crushers and a cryo‐focusing cell. This paper provides details of the line design and discusses strategies for line conditioning and mitigation of memory effects. The line allows measurements of hydrogen and oxygen isotopes during a single acquisition. The precision of the analyses depends on the amount of water released from the inclusions. The best results are obtained for samples containing at least 0.1–0.2 µL (0.06–0.11 µmol) H₂O. For such samples precision is better than 1.5‰ for δD and 0.5‰ for δ¹⁸O (1σ). Smaller amounts of water can be measured but at lower precision. Analyses of modern calcite formed under stable conditions in a deep cave allowed assessment of the accuracy of the analyses. The δD values measured in fluid inclusions of this working standard match the δD value of the parent water, and the oxygen isotope values agree within ca. 0.5‰. This indicates that fluid inclusions trapped in calcite at near‐ambient temperatures (e.g. speleothems and low‐temperatures phreatic calcite) faithfully preserve the original isotopic composition of the parent waters. Copyright © 2009 John Wiley & Sons, Ltd.     

Measurement of sulfur isotope composition (δ34S) by multiple‐collector thermal ionization mass spectrometry using a 33S‐36S double spike

A new analytical technique is described for the determination of δ³⁴S that is comparable to or better than modern gas source mass spectrometry in precision and accuracy, but requires about a factor of 10 less sample. The technique is based on the production of singularly charged arsenic sulfide molecular ions (AsS⁺) by thermal ionization using silica gel as an emitter and combines multiple‐collector thermal ionization mass spectrometry (MC‐TIMS) with a ³³S‐³⁶S double spike to correct instrumental fractionation. Three international sulfur standards (IAEA‐S‐1, IAEA‐S‐2, and IAEA‐S‐3) were measured to evaluate the precision and accuracy of the new technique and to evaluate the consensus values for these standards. Two different double spike preparations were used. The δ³⁴S values (reported relative to Vienna Canyon Diablo Troilite (VCDT), (δ³⁴S (‰) = ([((³⁴S/³²S)_sample/(³⁴S/³²S)_VCDT ? 1) × 1000]), ³⁴S/³²S_VCDT = 0.0441626) determined were ?0.32 ± 0.04‰ (1σ, n = 4) and ?0.31 ± 0.13‰ (1σ, n = 8) for IAEA‐S‐1, 22.65 ± 0.04‰ (1σ, n = 7) and 22.60 ± 0.06‰ (1σ, n = 5) for IAEA‐S‐2, and ?32.47 ± 0.07‰ (1σ, n = 8) for IAEA‐S‐3. The amount of natural sample used for these analyses ranged from 0.40 to 2.35 µmol. Replicate determinations of each standard showed less than 0.5‰ variability (IAEA‐S‐1 <0.4‰, IAEA‐S‐2 <0.2‰, and IAEA‐S‐3 <0.2‰). Because the technique is based on thermal ionization of AsS⁺, and As is mononuclidic, corrections for interferences or for scale contraction/expansion are not required. The availability of MC‐TIMS instruments in laboratories around the world makes this technique immediately available to a much larger scientific community who require highly accurate and precise measurements of sulfur. Published in 2005 by John Wiley & Sons, Ltd.     

Effect of ecosystem retrogression on stable nitrogen and carbon isotopes of plants,soils and consumer organisms in boreal forest islands

In the prolonged absence of catastrophic disturbance, ecosystem retrogression occurs, and this involves increased nutrient limitation, and reduced aboveground and belowground ecosystem processes rates. Little is known about how the nitrogen and carbon stable isotope ratios (δ¹⁵N and δ¹³C) of plants, soils and consumer organisms respond to retrogression in boreal forests. We investigated a 5000 year chronosequence of forested islands in the boreal zone of northern Sweden, for which the time since lightning‐induced wildfire increases with decreasing island size, leading to ecosystem retrogression. For this system, tissue δ¹⁵N of three abundant plant species (Betula pubescens, Vaccinium myrtillus and Pleurozium schreberi) and humus all increased as retrogression proceeded. This is probably due to enhanced ecosystem inputs of N by biological fixation, and greater dependency of the plants on organic N during retrogression. The δ¹³C of B. pubescens and plant‐derived humus also increased during retrogression, probably through nutrient limitation increasing plant physiological stress. Unlike the plants, δ¹⁵N of invertebrates (lycosid spiders and ants) did not increase during retrogression, probably because of their partial dependence on aquatic‐derived prey that had a variable δ¹⁵N signature. The δ¹³C of the invertebrates increased as retrogression proceeded and converged towards that of an aquatic prey source (chironomid flies), suggesting increased dependence on aquatic‐derived prey during retrogression. These results show that measurement of δ¹⁵N and δ¹³C of plants, soils, and consumers across the same environmental gradient can provide insights into environmental factors that drive both the aboveground and belowground subsystems, as well as the linkages between them. Copyright © 2009 John Wiley & Sons, Ltd.     

A new isolation procedure of nitrate from freshwater for nitrogen and oxygen isotope analysis

The nitrogen (δ¹⁵N) and oxygen isotope (δ¹⁸O) analysis of nitrate (NO₃^–) from aqueous samples can be used to determine nitrate sources and to study N transformation processes. For these purposes, several methods have been developed; however, none of them allows an accurate, fast and inexpensive analysis. Here, we present a new simple method for the isolation of nitrate, which is based on the different solubilities of inorganic salts in an acetone/hexane/water mixture. In this solvent, all major nitrate salts are soluble, whereas all other oxygen‐bearing compounds such as most inorganic carbonates, sulfates, and phosphates are not. Nitrate is first concentrated by freeze‐drying, dissolved in the ternary solvent and separated from insoluble compounds by centrifugation. Anhydrous barium nitrate is then precipitated in the supernatant solution by adding barium iodide. For δ¹⁸O analysis, dried Ba(NO₃)₂ samples are directly reduced in a high‐temperature conversion system to CO and measured on‐line using isotope ratio mass spectrometry (IRMS). For δ¹⁵N analysis, samples are combusted in an elemental analyzer (EA) coupled to an IRMS system. The method has been tested down to 20 µmol NO₃^– with a reproducibility (1SD) of 0.1‰ for nitrogen and 0.2–0.4‰ for oxygen isotopes. For nitrogen we observed a small consistent ¹⁵N enrichment of +0.2‰, probably due to an incomplete precipitation process and, for oxygen, a correction for the incorporation of water in the precipitated Ba(NO₃)₂ has to be applied. Apart from being robust, this method is highly efficient and low in cost. Copyright © 2011 John Wiley & Sons, Ltd.     

A method for 13C‐labeling of metabolic carbohydrates within French bean leaves (Phaseolus vulgaris L.) for decomposition studies in soils

The molecular composition of plant residues is suspected to largely govern the fate of their constitutive carbon (C) in soils. Labile compounds, such as metabolic carbohydrates, are affected differently from recalcitrant and structural compounds by soil‐C stabilisation mechanisms. Producing ¹³C‐enriched plant residues with specifically labeled fractions would help us to investigate the fate in soils of the constitutive C of these compounds. The objective of the present research was to test ¹³C pulse chase labeling as a method for specifically enriching the metabolic carbohydrate components of plant residues, i.e. soluble sugars and starch. Bean plants were exposed to a ¹³CO₂‐enriched atmosphere for 0.5, 1, 2, 3 and 21 h. The major soluble sugars were then determined on water‐soluble extracts, and starch on HCl‐hydrolysable extracts. The results show a quick differential labeling between water‐soluble and water‐insoluble compounds. For both groups, ¹³C‐labeling increased linearly with time. The difference in δ¹³C signature between water‐soluble and insoluble fractions was 7‰ after 0.5 h and 70‰ after 21 h. However, this clear isotopic contrast masked a substantial labeling variability within each fraction. By contrast, metabolic carbohydrates on the one hand (i.e. soluble sugars + starch) and other fractions (essentially cell wall components) on the other hand displayed quite homogeneous signatures within fractions, and a significant difference in labeling between fractions: δ¹³C = 414 ± 3.7‰ and 56 ± 5.5‰, respectively. Thus, the technique generates labeled plant residues displaying contrasting ¹³C‐isotopic signatures between metabolic carbohydrates and other compounds, with homogenous signatures within each group. Metabolic carbohydrates being labile compounds, our findings suggest that the technique is particularly appropriate for investigating the effect of compound lability on the long‐term storage of their constitutive C in soils. Copyright © 2009 John Wiley & Sons, Ltd.     

On the calibration of continuous,high‐precision δ18O and δ2H measurements using an off‐axis integrated cavity output spectrometer

The ¹⁸O and ²H of water vapor serve as powerful tracers of hydrological processes. The typical method for determining water vapor δ¹⁸O and δ²H involves cryogenic trapping and isotope ratio mass spectrometry. Even with recent technical advances, these methods cannot resolve vapor composition at high temporal resolutions. In recent years, a few groups have developed continuous laser absorption spectroscopy (LAS) approaches for measuring δ¹⁸O and δ²H which achieve accuracy levels similar to those of lab‐based mass spectrometry methods. Unfortunately, most LAS systems need cryogenic cooling and constant calibration to a reference gas, and have substantial power requirements, making them unsuitable for long‐term field deployment at remote field sites. A new method called Off‐Axis Integrated Cavity Output Spectroscopy (OA‐ICOS) has been developed which requires extremely low‐energy consumption and neither reference gas nor cryogenic cooling. In this report, we develop a relatively simple pumping system coupled to a dew point generator to calibrate an ICOS‐based instrument (Los Gatos Research Water Vapor Isotope Analyzer (WVIA) DLT‐100) under various pressures using liquid water with known isotopic signatures. Results show that the WVIA can be successfully calibrated using this customized system for different pressure settings, which ensure that this instrument can be combined with other gas‐sampling systems. The precisions of this instrument and the associated calibration method can reach ～0.08‰ for δ¹⁸O and ～0.4‰ for δ²H. Compared with conventional mass spectrometry and other LAS‐based methods, the OA‐ICOS technique provides a promising alternative tool for continuous water vapor isotopic measurements in field deployments. Copyright © 2009 John Wiley & Sons, Ltd.