Synthesis of polymer grafted carbon nanotubes by nitroxide mediated radical polymerization in the presence of spin-labeled carbon nanotubes

Multiwalled carbon nanotubes (MWCNT) were grafted with polystyrene by in situ nitroxide mediated radical polymerization in the presence of TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxyl) functionalized MWCNT, which was synthesized by the reaction between 4-hydroxyl-TEMPO (HO-TEMPO) and carbonyl chloride groups on the MWCNT. Although the controllability of the polymerization was not high, highly soluble grafted MWCNTs were indeed obtained, indicating that the graft polymerization was efficient. The resulting polystyrene grafted MWCNTs were easily defunctionalized at room temperature using 3-chloroperoxybenzioc acid. TEM, SEM, and TGA were employed to determine the structure, morphology, and the grafting quantities of the resulting products.     

Surface modification of multiwalled carbon nanotubes via nitroxide‐mediated radical polymerization

The nitroxide‐mediated radical polymerization of styrene was carried out on the surfaces of multiwalled carbon nanotubes (MWNTs) initiated by an MWNT‐supported initiator multiwalled carbon nanotube–2″,2″,6″,6″‐tetramethylpiperidinyloxy (MWNT–Tempo). The content of polystyrene grafted from the surface was controlled by changes in the polymerization conditions, such as the reaction times or the ratios of monomers to initiators. The obtained polystyrene‐grafted multiwalled carbon nanotubes (MWNT–PSs) were further used to initiate the polymerization of 4‐vinylpyridine to get polystyrene‐b‐poly(4‐vinylpyridine)‐grafted multiwalled carbon nanotubes (MWNT–PS‐b‐P4VPs). In contrast to unmodified MWNTs, MWNT–PSs had relatively good dispersibility in various organic solvents, such as tetrahydrofuran, CHCL₃, and o‐dichlorobenzene. The structures and properties of MWNT–PSs and MWNT–PS‐b‐P4VPs were characterized and studied with several methods, including thermogravimetric analysis, Fourier transform infrared, ultraviolet–visible, and transmission electron microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4656–4667, 2006     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Effect of the AACVD based synthesis atmosphere on the structural properties of multi-walled carbon nanotubes

The synthesis of multi-walled carbon nanotubes (MWCNT_S) has been the focus of considerable research effort for more than twenty-five years and it continues to receive increasing attention because of its importance to produce carbon nanotubes with suitable parameters for future applications. To the best of our knowledge this study presents for the first time the complex studies concerning the effect of aerosol-assisted chemical vapour deposition (AACVD) process conditions (including temperature (750–1200 °C) and the composition of the carrier gas (N₂, Ar, He, 5% H₂-95% Ar, 3% H₂O-97% Ar)) on the conversion of the carbon source and on the properties of the carbon nanotubes. In addition, it was also found that oxidative or reductive atmosphere applied during the AACVD process have a great impact on the quality and the degree of toluene conversion into the carbon solids obtained during the synthesis. X-ray Diffraction (XRD), Specific Surface Area and Porosity analysis (BET), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS), Transmission Electron Microscopy (TEM), Raman spectroscopy and Thermo-gravimetric Analysis (TG) were used to characterize the carbon nanotubes.     

129Xe NMR study of the localization of PdCl2 supported on carbon nanotubes

Localization of PdCl₂ clusters supported on multi-wall carbon nanotubes (MWCNT) has been investigated using ¹²⁹Xe NMR of adsorbed xenon. As-made MWCNTs with channels initially inaccessible for adsorption and ball-milled MWCNTs with the totally accessible internal surface were used as supports. The observed ¹²⁹Xe NMR spectra were determined by the dynamics of xenon exchange between the aggregate pores and nanotube channels. No considerable changes of the ¹²⁹Xe NMR spectrum with the concentration of supported PdCl₂ were observed for the as-made MWCNT, while an additional resonance appeared for the ball-milled nanotubes. The ¹²⁹Xe NMR experiments evidenced the supported species to be localized on the internal surface of the ball-milled MWCNT.     

Decorating Multi-Walled Carbon Nanotubes with Temperature-Responsive Polymer Shells via Surface-Initiated Redox Polymerization

The temperature-responsive multi-walled carbon nanotubes (MWCNTs) were prepared by decorating MWCNTs with poly(N-isopropylacrylamide) (PNIPAM) chains via surface-initiated redox polymerization. Chemical structure of resulting product and the quantities of grafted polymer were determined by FT-IR and TGA. TEM and FE-SEM images clearly indicate that the nanotubes were coated with a PNIPAM layer. DSC analysis indicates that the functionalized MWCNTs can respond to temperature, because of the hydrophilic and hydrophobic transformation of the bonded PNIPAM chains at 30–35°C.     

Multi‐walled carbon nanotubes encapsulated with polyurethane and its nanocomposites

Poly(acryloyl chloride) (PACl) was employed to enhance the surface of multi‐walled carbon nanotubes (MWCNTs). MWCNTs were first acid treated to generate hydroxyl groups on the surface, which was reacted with PACl to obtain an encapsulation. The numerous acryloyl chloride groups on the out layer were esterified with a proper amount of ethylene glycol (EG). Subsequently, 4,4′‐methylenebis (phenylisocyanate) (MDI) and 1,4‐butanediol (BDO) were introduced into the system, and a polyurethane (PU) layer was formed in situ. The formation of PU layers on MWCNTs was confirmed by Fourier transform infrared spectrometer (FTIR) and X‐ray photoelectron spectroscope (XPS). The morphology of encapsulated MWCNTs was observed by transmission electron microscope (TEM) and scanning electron microscope (SEM). Thermo gravimetric analysis (TGA) showed the grafted polymer fraction was up to 90%. On introducing the modified MWCNTs into a PU matrix, an increase in tensile strength by 60.6% and improvement in modulus by 6.3% over neat PU was observed. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4857–4865, 2008     

Synthesis and characterization of pyrene bearing amphiphilic miktoarm star polymer and its noncovalent interactions with multiwalled carbon nanotubes

A novel amphiphilic miktoarm star polymer, polystyrene‐poly(ethylene glycol)‐poly(methyl methacrylate), bearing a pyrene group at the end of PS arm (Pyrene‐PS‐PEG‐PMMA) was successfully synthesized via combination of atom transfer radical polymerization and click chemistry. The structure and composition of the amphiphilic miktoarm star polymer were characterized by gel permeation chromatography and ¹H NMR. The functionalization of multiwalled carbon nanotubes (MWCNTs) via “π–π” stacking interactions with pyrene‐PS‐PEG‐PMMA miktoarm star polymer was accomplished and the resulting polymer‐MWCNTs hybrid was analyzed by using ¹H NMR, UV–vis, fluorescence spectroscopy, and thermal gravimetric analysis. The high‐resolution transmission electron microscopy and analytical techniques aforementioned confirmed that the noncovalent functionalization of MWCNT's with the amphiphilic miktoarm star polymer was successfully achieved. The MWCNT/pyrene‐PS‐PEG‐PMMA exhibited significant dispersion stability in common organic solvents such as dimethyl formamide, chloroform, and tetrahydrofuran. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Tuning retention and selectivity in reversed-phase liquid chromatography by using functionalized multi-walled carbon nanotubes

Aim of this work was to explore the possibility of retention and selectivity tuning in reversed-phase liquid chromatography by means of chemically modified multi-walled carbon nanotubes (MWCNTs). These were synthesized by derivatizing pristine MWCNTs with amino-terminated alkyl chains containing polar embedded groups. A novel hybrid material based on functionalized MWCNTs (MWCNTs-R-NH₂) was prepared, characterized and tested. The idea was to design a mixed-mode separation medium basing its sorption properties on the peculiar characteristics of MWCNTs combined with the chemical interactions provided by the functional chains introduced on the nanotube skeleton. MWCNTs-R-NH₂ were easily grafted to silica microspheres by gamma radiation (using a ⁶⁰Co source) in the presence of polybutadiene as the linking agent. The composite was characterized by scanning electron microscopy (SEM) and Brunauer, Emmett and Teller (BET) analysis in terms of structural morphology, surface area and porosity. The MWCNTs-R-NH₂ sorbent was tested as stationary phase. The reversed-phase behaviour was first proved by analysis of alkylbenzenes, while the key role of CNT derivatization in addressing the selectivity/affinity towards the solutes was evidenced by testing three classes of analytes, viz. barbiturates, steroid hormones and alkaloids. These compounds, with different molecular structure and polarity, were here analysed for the first time on CNT-based LC stationary phases. The behaviour of the novel sorbent was compared in terms of retention capability and resolution with that observed using unmodified MWCNTs, pointing out the mixed-mode characteristics of the MWCNTs-R-NH₂ material. The same test mixtures were analysed also on a conventional mono-modal separation sorbent (C18) to highlight the particular behaviour of the (derivatized)MWCNTs-based stationary phases. The novel material showed better performance in separation of polar compounds, i.e. barbiturates and alkaloids, than the unmodified MWCNTs and than the C18 column. Results showed that MWCNT functionalization is powerful to modulate retention/selectivity in reversed-phase liquid chromatography.     

In Situ polymerization functionalization of single‐walled carbon nanotubes with polystyrene

The in situ polymerization functionalization of single‐walled carbon nanotubes (SWNT) with polystyrene (PS) is demonstrated utilizing stabilized nanotubes reduced by dissolution of excess lithium in ammonia. Short PS chains are tethered to SWNT sidewalls to facilitate a robust compatibilization strategy for nanotube dispersion. To augment extents of functionalization, while maintaining in situ dispersion stability, the effects of multiple monomer addition steps and varied carbon to lithium ratio are studied. The developed functionalization scheme is also effective for the reductive alkylation of SWNT with dodecyl surface groups. By studying the dodecylated SWNT, the molecular weight of grafted PS chains is estimated. The discovery of a general experimental artifact has implications for all functionalization routes utilizing reduction with lithium in ammonia. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3716–3725     

Surface initiated ring-opening polymerization of l-proline N-carboxy anhydride from single and multi walled carbon nanotubes

Ring-opening surface initiated polymerization of l-proline N-carboxyanhydride was performed from amine functionalized single (SWNTs) and multi walled carbon nanotubes (MWNTs). The primary amines were grafted on the surfaces via a well-studied Diels–Alder cycloaddition. The initiator attachment helped the debundling of carbon nanotubes as shown by atomic force microscopy (AFM) studies where only small aggregates were observed. Thermogravimetric analysis revealed high wt% of grafted polyproline on the carbon nanotubes surface after the ring-opening polymerization. AFM studies showed a rather uniform layer of grafted polyproline from both MWNTs and SWNTs. The grafting of PLP on the surface was also verified by FTIR and Raman spectroscopy as well as ¹H NMR in CDCl₃/d-TFA. The polyproline grafted carbon nanotubes (CNTs) were readily dissolved in organic solvents in contrast to the insoluble pristine and amine-functionalized CNTs.     

A novel synthesis of polymer brush on multiwall carbon nanotubes bearing terminal monomeric unit

A novel approach to fabricate polymer brushes on the surface of carbon nanotubes (CNTs) is proposed. Carboxyl groups on the surface of chemically oxidized CNTs were reacted with hexamethylene diisocyanate, followed by a reaction with methacrylamide to give terminal vinyl groups‐functionalized CNTs, so called “CNT‐mer.” The synthetic procedure was investigated step‐by‐step and the synthesized CNT‐mer was used to grow polystyrene (PS) from CNTs by a simple in situ polymerization in the presence of a thermal initiator. By employing ¹H NMR, X‐ray photoelectron spectroscopy, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and light scattering, the experimental results were verified. Using this approach, 45% PS with respect to CNTs are grafted on the surface of CNTs with about 4.0 nm thickness. This novel technique would provide a facile route to prepare tailor‐made polymer brushes on the surface of CNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:6394–6401, 2006     

Surface covalent encapsulation of multiwalled carbon nanotubes with poly(acryloyl chloride) grafted poly(ethylene glycol)

Multiwall carbon nanotube (MWNT) was grafted with polyacrylate‐g‐poly (ethylene glycol) via the following two steps. First, hydroxyl groups on the surface of acid‐treated MWNT reacted with linear poly(acryloyl chloride) to generate graft on MWNT; secondly, the remaining acryloyl chloride groups were subjected to esterification with poly(ethylene glycol) leading the grafted chains on the surface of MWNTs. Thus obtained grafted MWNT was characterized using Fourier transform infrared spectrometer, transmission electron microscopy, and X‐ray photoelectron spectroscopy. Thermogravimetric analysis showed that the weight fraction of grafted polymers amounted to 80% of the modified MWNT. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6880–6887, 2006     

Pyrolysis of chloroplatinic acid to directly immobilize platinum nanoparticles onto multi-walled carbon nanotubes

Platinum nanoparticles supported on multi-walled carbon nanotubes (Pt/MWCNTs) were first prepared by simple pyrolysis of H₂PtCl₆ solution. The structure of Pt/MWCNTs was characterized with X-ray diffraction (XRD), scanning electron microscope (SEM), and the results showed that the diameter of the obtained platinum nanoparticles immobilized on MWCNTs was below 50 nm, although the obtained platinum nanoparticles were not well uniformly dispersed on the surface of MWCNTs. The electrocatalytic performance of Pt/MWCNTs electrode for methanol oxidation reaction (MOR) was also investigated by linear sweep voltammetry (LSV), indicating that it was possible to employ the obtained platinum nanoparticles as anode material in fuel cell. Developing a novel and simple method to prepare platinum nanoparticles onto MWCNTs is the main contribution of this letter. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 8, pp. 1050–1053. The text was submitted the authors in English.     

Polyelectrolyte‐grafted carbon nanotubes: Synthesis,reversible phase‐transition behavior,and tribological properties as lubricant additives

A novel polyelectrolyte‐grafted multiwalled carbon nanotubes (MWCNTs‐g‐PILs) which possesses a hard backbone of MWCNTs and a soft shell of brush‐like poly (ionic liquids) (PILs) has been synthesized via the surface atom transfer radical polymerization (ATRP). Chemical structure and the grafted PILs quantities of MWCNTs‐g‐PILs were determined by FTIR, TGA, and XPS. TEM and FE‐SEM observations indicate that the nanotubes were coated with a PILs layer, exhibiting core‐shell nanostructures with the PILs chains as the brush‐like or hairy shell and the MWCNTs as the hard backbone. Furthermore, the effect of counter‐anions on the solubility of MWCNTs‐g‐PILs was investigated. The results indicate that relative solubility of MWCNTs‐g‐PILs in various solvents could be switched by anion exchange. This tunable solubility results in the formation of the cycle of reversible phase‐transition. Tribological property of MWCNTs‐g‐PILs as additives in base lubricant 1‐methyl‐3‐butylimidaaolium hexafluorophosphate (LP104) was evaluated using an Optimol SRV oscillating friction and wear tester, confirming that MWCNTs‐g‐PILs are the excellent antiwear and friction‐reducing additives, which can amend the tribological properties of base lubricant significantly. This is attributed to the good dispersibility and core‐shell structure of MWCNTs‐g‐PILs. These results reported in this work may open primarily toward constructing a bridge among carbon nanotues (CNTs), ILs, and lubricant additives and secondarily to prove that CNTs (modified CNTs) as lubricant additives are promising candidates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7225–7237, 2008     

共价接枝硅酞菁-多壁碳纳米管的合成及光电性能

采用酰胺反应把硅酞菁(SiPc)共价接枝到多壁碳纳米管(MWCNT)上,得到MWCNT-Pc,用紫外可见,红外光谱,拉曼光谱,X射线光电子能谱,热重分析等进行了表征,结果表明碳纳米管上每约457个碳原子接枝一个酞菁分子;为研究共价接枝的MWCNT-Pc体系中光激发的电子流动情况,探讨了Pc静电组装到MWCNT后的荧光淬灭的情况,结果显示SiPc的光激发电子向MWCNT转移;同时采用喷涂法构筑了ITO/MWCNT-Pc光电极,并在光伏电池中研究了其光电性能,在AM1.5光照条件下,光电流及光电压分别为0.434 V和0.158 mA·cm-2,在320 nm处的IPCE达19.8%。本研究目的在于制备碳纳米管衍生物并构筑基于碳管的复杂的功能纳米结构材料,为其应用奠定基础。     

Platinum Nanoparticles Decorated Multiwalled Carbon Nanotubes – Ionic Liquid Composite Film Coated Glassy Carbon Electrodes for Sensitive Determination of Theophylline

Platinum nanoparticles (Pt_nano) decorated multiwalled carbon nanotubes (MWCNTs)–1‐octyl‐3‐methylimidazolium hexafluorophosphate ([omim][PF₆]) composite material (MWCNTs‐Pt_nano‐[omim][PF₆]) was fabricated and characterized for the first time. In the presence of [omim][PF₆], more Pt_nano could deposit on MWCNTs. The average diameter of the deposited Pt_nano was about 5 nm. The composite material film coated glassy carbon electrode (GCE) exhibited sensitive voltammetric response to theophylline (TP). Under the optimized conditions (i.e., preconcentration for 2 minutes on open circuit in 0.10 M pH 3.0 phosphate buffer), the anodic peak current of TP at about 1.1 V (vs. SCE) was linear to TP concentration over the range of 1.0×10^?8–1.0×10^?5 M. The detection limit was estimated to be 8.0×10^?9 M. The modified electrode was successfully applied to the determination of TP in medicine tablet and green tea. In addition, the voltammetric responses of hypoxanthine (HX), xanthine (Xan) and uric acid (UA) on the MWCNTs‐Pt_nano‐[omim][PF₆]/GCE were also discussed.     

Preparation of micelle-encapsulated single-wall and multi-wall carbon nanotubes with amphiphilic hyperbranched polymer

The hyperbranched polyester (Boltorn^TM H20) was modified by maleic anhydride and then polystyrene (H20-MAh-PSt) to form amphiphilic micelles in water. The single-wall and multi-wall carbon nanotubes (SWCNTs and MWCNTs, respectively) were encapsulated in the formed micelles through non-covalent interactions. The formed structures were confirmed by FTIR, NMR, GPC, and XPS analysis. The dispersion and aggregation behaviors were observed by TEM and UV-vis and Raman spectroscopic analysis. The results showed that the dispersion performance of the obtained micelle-encapsulated carbon nanotubes in water was greatly improved compared to the pure carbon nanotubes. From the TEM observation, the individual SWCNT structure and the uniform polymer coating around the surface of SWCNT were seen after crosslinking. The Raman spectroscopic measurements also demonstrated that for the crosslinked samples, no effect occurred associated with concentration-dependent carbon nanotube aggregation.     

Comparative study on the properties of poly(trimethylene terephthalate) ‐based nanocomposites containing multi‐walled carbon (MWCNT) and tungsten disulfide (INT‐WS2) nanotubes

Multi‐walled carbon (MWCNT) and tungsten disulfide (INT‐WS₂) nanotubes are materials with excellent mechanical properties, high electrical and thermal conductivity. These special properties make them excellent candidates for high strength and electrically conductive polymer nanocomposite applications. In this work, the possibility of the improvement of mechanical, thermal and electrical properties of poly(trimethylene terephthalate) (PTT) by the introduction of MWCNT and INT‐WS₂ nanotubes was investigated. The PTT nanocomposites with low loading of nanotubes were prepared by in situ polymerization method. Analysis of the nanocomposites' morphology carried out by SEM and TEM has confirmed that well‐dispersed nanotubes in the PTT matrix were obtained at low loading (<0.5 wt%). Thermal and thermo‐oxidative stability of nanocomposites was not affected by the presence of nanotubes in PTT matrix. Loading with INT‐WS₂ up to 0.5 wt% was insufficient to ensure electrical conductivity of PTT nanocomposite films. In the case of nanocomposites filled with MWCNT, it was found that nanotube incorporation leads to increase of electrical conductivity of PTT films by 10 orders of magnitude, approaching a value of 10^?3 S/cm at loading of 0.3 wt%. Tensile properties of amorphous and semicrystalline (annealed samples) nanocomposites were affected by the presence of nanotubes. Moreover, the increase in the brittleness of semicrystalline nanocomposites with the increase in MWCNT loading was observed, while the nanocomposites filled with INT‐WS₂ were less brittle than neat PTT. Copyright © 2016 John Wiley & Sons, Ltd.     

Luminescent Blooming of Dendronic Carbon Nanotubes through Ion‐Pairing Interactions with an EuIII Complex

A multiwalled carbon nanotube (MWCNT) scaffold was covalently functionalized with a second‐generation polyamidoamine (PAMAM) dendron, presenting four terminal amino groups per grafted aryl moiety. These reactive functions were alkylated to obtain a positively charged polycationic dendron/carbon nanotube system ( d‐MWCNTs?Cl ), which eventually underwent anion exchange reaction with a negatively charged and highly luminescent Eu^III complex ( [EuL₄]?NEt₄ , in which L =(2‐naphtoyltrifluoroacetonate)). This process afforded the target material d‐MWCNTs?[EuL₄] , in which MWCNTs are combined with red‐emitting Eu^III centers through electrostatic interactions with the dendronic branches. Characterization of the novel MWCNT materials was accomplished by means of TGA and TEM, whereas d‐MWCNTs?Cl and d‐MWCNTs? [EuL₄] further underwent XPS, SEM and Raman analyses. These studies demonstrate the integrity of the luminescent [EuL₄]^? center in the luminescent hybrid, the massive load of the cationic binding sites, and the virtually complete anion‐exchange into the final hybrid material. The occurrence of the ion‐pairing interaction with MWCNTs was unambiguously demonstrated through DOSY NMR diffusion studies. Photophysical investigations show that MWCNTs?[EuL₄] is a highly soluble and brightly luminescent red hybrid material in which MWCNTs act as photochemically inert scaffolds with negligible UV/Vis absorption, compared with the grafted Eu complex, and with no quenching activity. The high dispersibility of MWCNTs?[EuL₄] in a polymer matrix makes it a promising luminophore for applications in material science.