Low‐band gap copolymers containing thienothiadiazole units: Synthesis,optical, and electrochemical properties

Novel low‐band gap alternating copolymers consisting of 9,9‐bis(2‐ethylhexyl)fluorene and 4,6‐di(2‐thienyl)thieno[3,4‐c][1,2,5]thiadiazole and its 3,3″‐dialkyl derivatives were synthesized by Suzuki copolymerization reaction, and their photophysical and electrochemical properties were studied. The copolymers possess small optical band gap 1.3–1.4 eV. The absorption covers the whole visible spectral region. The long‐wavelength absorption maxima in thin films located at approximately 750–785 nm are significantly red shifted compared with those in solution, indicating strong intermolecular interactions. The introduction of alkyl chains to the thiophene units increases the molecular weights of soluble fractions and solubility of the final copolymers, leading to the improved processability of thin films. Polymer solutions exhibited solvatochromism and thermochromism, which is strongly supported by the involvement of the alkyl chains. The copolymers exhibited ambipolar redox properties and reversible electrochromic behavior. The electronic properties are influenced only slightly by alkyl substituents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2743–2756, 2010     

Simulated glass transition in free‐standing thin polystyrene films

In this article, we investigate the glass transition in polystyrene melts and free‐standing ultra‐thin films by means of large‐scale computer simulations. The transition temperatures are obtained from static (density) and dynamic (diffusion and orientational relaxation) measurements. As it turns out, the glass transition temperature of a 3 nm thin film is ～60 °K lower than that of the bulk. Local orientational mobility of the phenyl bonds is studied with the help of Legendre polynomials of the second‐order P₂(t). The α and β relaxation times are obtained from the spectral density of P₂(t). Our simulations reveal that interfaces affect α and β‐relaxation processes differently. The β relaxation rate is faster in the center of the film than near a free surface; for the α relaxation rate, an opposite trend is observed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1160–1167, 2010     

Bipolar poly(p‐phenylene vinylene)s bearing electron‐donating triphenylamine or carbazole and electron‐accepting quinoxaline moieties

Two new poly(phenylene vinylene)s (PPVs) carrying electron‐donating triphenylamine or carbazole and electron‐deficient quinoxaline units were synthesized and characterized. Their properties were compared with those of PPV containing only quinoxaline unit. The two polymers showed PL maximum at 501–510 in solution and 533–540 in thin film. Because of the presence of electron donor and acceptor units they displayed strong intramolecular charge transfer (ICT) effects; hence, low‐photoluminescence quantum yields. The polymers showed reversible electrochemical reduction with electron affinity of 2.75 eV and irreversible oxidation with ionization potential of 5.10–5.24 eV. Single‐layer LED of configuration ITO/PEDOT/polymer/Al showed low turn‐on voltage at 5 V, but limited brightness of 50–60 cdm^?2. The electroluminescence maximum was voltage‐tunable varying from 500 to 542 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2367–2378, 2008     

Copoly(peryleneimide)s containing 1,3,4‐oxadiazole rings: Synthesis and properties

New copolyimides containing perylenediimide, oxadiazole and hexafluoroisopropylidene moieties were prepared by one‐step polycondensation reaction in solution at high temperature of aromatic diamines containing preformed oxadiazole ring with a mixture of a dianhydride having a perylene ring and another dianhydride with hexafluoroisopropylidene unit. The thermal stability and glass transition temperatures of these copolyimides were measured and compared with those of related polyimides. The solid polymers were also studied by polarized light microscopy and X‐ray diffraction which revealed a semicrystalline state consisting of face‐to‐face arranged columns of perylenediimide units. The film‐forming ability and properties of the resulting thin films were investigated by using atom force microscopy and scanning electron microscopy which showed that the films were organized into self‐assembled rod‐like structures. The UV‐Vis and photoluminescence properties in solution and in solid state were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4230–4242, 2010     

Novel electroluminescent cationic polyelectrolyte based on poly[(fluorene‐2,7‐diylvinylene)‐alt‐(1,4‐phenylenevinylene)] and its precursor

A novel conjugated poly[(fluorene‐2,7‐vinylene)‐alt‐(1,4‐phenylenevinylene)] derivative 2 with quaternizable tertiary amino groups was synthesized by Heck coupling of a substituted 2,7‐dibromofluorene and 1,4‐dialkoxy‐2,5‐divinylbenzene. The corresponding quaternary ammonium cationic polyelectrolyte 3 was obtained by the treatment of 2 with bromoethane. Both polymers were soluble in common organic solvents, like tetrahydrofuran, chloroform, and dichloromethane. Polymer 3 showed a limited solubility in alcohols and was insoluble in water. Photophysical and electrochemical properties of the resulting polymers were fully investigated. An intensive green photoluminescence (PL) with maxima at 550 and 545 nm was observed from thin films of 2 and 3 polymers, respectively, red‐shifted compared with the PL emission spectra measured in the solution. The electrochemical band gaps were 2.38–2.45 eV. Single‐layer and double‐layer (with poly[3,4‐(ethylenedioxy)thiophene]/poly (styrenesulfonate) (PEDOT:PSS)) light‐emitting devices (LEDs) with ITO and Al electrodes were prepared and studied. They emitted a green light and their electroluminescence (EL) spectra were similar to those of PL thin films. The external EL efficiency was determined to be 0.43 and 0.32% for ITO/PEDOT:PSS/ 2 /Al and ITO/PEDOT:PSS/ 3 /Al LEDs, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1016–1027, 2007     

Synthesis and properties of triaryl diamine‐based hole‐transporting monomer and polymer

The synthesis and properties of hole‐transporting triaryl diamine‐based low‐molar‐mass compounds and polymer are reported. Comparative study on their thermal, optical, and photoelectrical properties is presented. All the synthesized compounds are found to form glasses with the glass transition temperatures in the range of 43–119 °C as characterized by differential scanning calorimetry. The ionization potentials of these compounds range from 5.31 to 5.40 eV as determined by electron photoemission method. Hole‐drift mobilities in the films of the synthesized compounds were estimated by the xerographic time‐of‐flight technique. They were found to reach 10^?3 cm²/Vs at electric field of 6.4 × 10⁵ V/cm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4674–4680, 2008     

Red,green, and blue electrochromism in ambipolar poly(amine–amide–imide)s based on electroactive tetraphenyl‐p‐phenylenediamine units

A series of novel poly(amine–amide–imide)s (PAAIs) based on tetraphenyl‐p‐phenylenediamine (TPPA) units showing anodically/cathodically electrochromic characteristic with three primary colors [red, green, and blue (RGB)] were prepared from the direct polycondensation of the TPPA‐based diamine monomer with various aromatic bis(trimellitimide)s. These multicolored electrochromic polymers were readily soluble in polar organic solvents and showed excellent thermal stability associated with high glass‐transition temperatures (288–314 °C) and high‐char yield (higher than 60% at 800 °C in nitrogen). The PAAI films revealed electrochemical oxidation and reduction accompanied with high contrast of optical transmittance color changes from the pale yellow neutral state to the green/blue oxidized state and red reduced state, respectively. The electrochromic films had high‐coloration efficiency (CE = 178 and 242 cm²/C at the first and the second stages, respectively), low‐switching time, and good redox stability, which still retained a high electroactivity after long‐term redox cycles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Facile synthesis of spray pyrolyzed ZnO/NiO nanocomposites thin films

Abstract

This study reviews ZnO, NiO, and ZnO/NiO nanocomposites thin films deposition using the Spray Pyrolysis Technique (S.P.T). The thin films were deposited onto ordinary glass substrates heated at 500?°C from aqueous solutions of zinc chloride and nickel chloride precursors dissolved in distilled water. The structural, morphological, and optical properties of the ZnO, NiO, and ZnO/NiO thin films have been studied by X-ray diffraction, scanning electron microscopy, Raman spectroscopies, and so on. The optical band gaps are 3.3 and 3.5?eV for ZnO and NiO thin films, respectively obtained by UV–Vis spectroscopy. However, the optical band gaps of ZnO/NiO nanocomposites thin films, are noticeable out of the range (3.4–3.64?eV).     

Experimental evidence and theoretical analysis of physical aging in thin and thick amorphous glassy polymer films

Through time‐dependent gas transport properties, we have investigated the physical aging process of amorphous glassy polymer films made from a polynorbornene. By combining the concepts of free volume and the kinetic theory of glass stabilization, it was found that the time dependence of the gas permeability could be rationalized through the thickness dependence of the glass transition temperature. A mathematical relationship was developed that directly relates polymer physical aging (tracked by the gas permeability decay) and sample thickness. It was confirmed by permeation measurements with nitrogen and helium that the aging process is accelerated for thin glassy polymer films (about 8000 Å). The theoretical results show that accelerated aging for thin films compared to thick films can be qualitatively predicted, based on the decrease in the glass transition temperature when the film thickness decreases. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2239–2251, 1999     

Electronic structure and electrical properties of interfaces between metals and π‐conjugated molecular films

The field of organic thin films and devices is progressing at an extremely rapid pace. Organic–metal and organic–organic interfaces play crucial roles in charge injection into, and transport through, these devices. Their electronic structure, chemical properties, and electrical behavior must be fully characterized and understood if the engineering and control of organic devices are to reach the levels obtained for inorganic semiconductor devices. This article provides an extensive, although admittedly nonexhaustive, review of experimental work done in our group on the electronic structure and electrical properties of interfaces between films of π‐conjugated molecular films and metals. It introduces several mechanisms currently believed to affect the formation of metal–organic interface barriers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2529–2548, 2003     

Synthesis and properties of nitrogen‐linked poly(2,7‐carbazole)s as hole‐transport material for organic light emitting diodes

A novel class of carbazole polymers, nitrogen‐linked poly(2,7‐carbazole)s, was synthesized by polycondensation between two bifunctional monomers using the palladium‐catalyzed amination reaction. The polymers were characterized by ¹H NMR, Infrared, Gel permeation chromatography, and MALDI‐TOF MS and it was revealed that the combination of the monomer structures is important for producing high molecular weight polymers. Thermal analysis indicated a good thermal stability with high glass transition temperatures, e.g., 138 °C for the higher molecular weight polymer P2 . To pursue the application possibilities of these polymers, their optical properties and energy levels were investigated by UV‐Vis absorption and fluorescence spectra as well as their electrochemical characteristics. Although the blue light emission was indeed observed for all polymers in solution, the quantum yields were very low and the solid films were not fluorescent. On the other hand, the HOMO levels of the polymers estimated from the onset potentials for the first oxidation in the solid thin films were relatively high in the range of ?5.12 to ?5.20 eV. Therefore, light emitting diodes employing these polymers as a hole‐transport layer and iridium(III) complex as a triplet emitter were fabricated. The device of the nitrogen‐linked poly(2,7‐carbazole) P3 with p,p′‐biphenyl spacer, which has a higher HOMO level and a higher molecular weight, showed a much better performance than the device of P2 with m‐phenylene spacer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3880–3891, 2009     

High‐refractive‐index thin films prepared from aminoalkoxysilane‐capped pyromellitic dianhydride–titania hybrid materials

High‐refractive‐index aminoalkoxysilane‐capped pyromellitic dianhydride (PMDA)–titania hybrid optical thin films (TP0–TP8) were synthesized and characterized in this study. They were prepared with PMDA, aminopropyltrimethoxysilane, and titanium(IV) isopropoxide via a sol–gel process followed by spin coating and multistep baking. Through adjustments in the concentration and reaction time, the inorganic content in the hybrid thin films could be as high as 59.1 wt %. The Fourier transform infrared results indicated successful bonding between the organic and inorganic moieties. However, residues of the chelating ligands were found in the hybrids with high titania contents, affecting their thermal and optical properties. Field emission scanning electron microscopy results suggested a nanosized domain of the titania segment in the hybrid materials TP0–TP8. An atomic force microscopy study suggested that the hybrid thin films had good planarization. The dispersions of the refractive index and extinction coefficient in the wavelength range 190–900 nm were studied. The refractive indices of the prepared hybrid thin films at 633 nm increased linearly from 1.567 to 1.780 with increasing titania content. However, the Abbe numbers of the hybrid thin films showed an opposite trend. Excellent optical transparence was obtained in the visible region for the prepared hybrid thin films. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3419–3427, 2001     

Photophysics,electrochemical properties,and electroluminescence of poly(p‐phenylenevinylene) derivatives with 1,3,5‐triphenylbenzene or 2,4,6‐triphenylpyridine segments along the backbone

The steady‐state and time‐resolved photoluminescence (PL), electrochemical behavior, and electroluminescence (EL) of didodecyloxy poly(p‐phenylenevinylene)‐based polymers that contained along the backbone structure 1,3,5‐triphenylbenzene (PC) or 2,4,6‐triphenylpyridine (PN) were studied. An intensive green PL broad‐band emission with maxima at 516 and 527 nm was observed from thin films of PC and PN polymers, respectively, redshifted in comparison with the PL emission spectra measured in tetrahydrofuran solutions. The PL decay dynamics revealed the existence of more than one excited species, and the decay curves were best described by three‐term exponential functions with a dominant lifetime of about 1 ns. The results of time‐resolved PL and steady‐state PL studies indicated excimer or aggregate formation. Both polymers oxidized irreversibly. A quasireversible reduction was observed in the PN polymer, whereas the PC polymer reduced irreversibly. For PC, slightly higher values of the ionization potential (E_IP) and electron affinity (E_A) were found (E_IP = 5.52 eV, E_A = 2.85 eV) than those for PN (E_IP = 5.37 eV, E_A = 2.77 eV). Light‐emitting devices with indium tin oxide hole‐injecting and aluminum electron‐injecting electrodes were prepared and studied. They emitted green light, and their EL spectra were similar to those of PL thin films. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 524–533, 2006     

Electrochemical and optical studies of furan and thieno[3,2‐b]thiophene end capped benzotriazole derivatives

Two new 2‐dodecyl benzotriazole (BTz) based donor‐acceptor‐donor (DAD) type polymers were synthesized and characterized in terms of their electrochemical and spectral properties. These DAD type polymers were synthesized electrochemically from furan or thieno[3,2‐b]thiophene (TT) end‐capped BTz monomers. Furan based and thieno[3,2‐b]thiophene based monomers showed monomer oxidations at 1.15 and 1.25 V, respectively, which eased the formation of conducting polymer films without overoxidation. Cyclic voltammetry and spectroelectrochemistry studies showed that both materials are multicolored electrochromic polymers. Results and comparison with properties of other BTz based DAD type polymers are highlighted in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A new near‐infrared switchable electrochromic polymer and its device application

A new near‐infrared switchable electrochromic polymer containing carbazole pendant (poly‐SNSC), synthesized by electrochemical polymerization of 2,5‐bis‐dithienyl‐1H‐pyrrole (SNS) main chain, has been prepared. The electrochemical and optical properties of SNSC monomer and its polymer have been investigated. Because of having two different electro‐donor moieties; that is, carbazole and SNS, SNSC gave two separate electrochemical oxidation and also light brown color of the film in the neutral state turn into gray on oxidation. An electrochromic device, contructed in the sandwich configuration [indium tin oxide (ITO)‐coated glass/anodically coloring polymer (poly‐SNSC)//gel electrolyte//cathodically coloring polymer (PEDOT)/ITO‐coated glass] and exhibited a high coloration efficiency (1216 cm² C^–1), a very short response time (about 0.3 s), low driving voltage, and a high redox stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Diels–Alder modification of poly(ethylene terephthalate‐co‐anthracene‐2,6‐carboxylate) with N‐substituted maleimides

Dimethyl 2,6‐anthracene dicarboxylate is used as a comonomer in the synthesis of functional copolymers that are subject to modification with Diels–Alder reactions. The formation of poly(ethylene terephthalate‐co‐2,6‐anthracenate), containing less than 20 mol % of the anthracene‐2,6‐dicarboxylate structural units, provides materials that are tractable and soluble. The anthracene units of the copolymers undergo Diels–Alder reactions with N‐substituted maleimides. The grafting of N‐alkylmaleimides affords soluble, hydrophobic polymers, whereas grafting with maleimide‐terminated poly(ethylene glycol) affords hydrophilic polymers. Because this reaction proceeds below the melting point of the copolymers, the procedure can be applied to thin films, whereby the surface properties are modified. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3256–3263, 2002     

Self‐organization of functional gradient structure in the biodegradable chitosan/poly(vinyl alcohol) blend film

Biologically inspired optimal structures combining the bioresorbable and bioactive properties are expected for the next generation of biomaterials. A compositional gradient structure was found to be spontaneously formed in the film of biodegradable chitosan/poly(vinyl alcohol) blend by casting aqueous solution on an aluminum dish. The formation of compositional gradient structure was confirmed by FTIR mapping measurement, DMTA measurement, and SEM observation on the freeze‐fractured cross section. In DMTA measurement, a broadening of the α‐relaxation curve corresponding to the glass transition was observed for the compositional gradient film, while a composition‐dependent single glass transition was observed for the homogeneous blend films. The resulted film with stable self‐organized compositional gradient exhibits novel physical properties inaccessible for the film of homogeneous blends obtained by casting from the same solution on a Teflon dish. The compositional gradient films present a unique combination of stronger stress and higher yield strain when compared with those of the homogeneous films at both dry and wet states. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3069–3076, 2005     

Energy level tuning of polythiophene derivative by click chemistry‐type postfunctionalization of side‐chain alkynes

A polythiophene derivative substituted with electron‐rich alkynes as a side chain was synthesized using the Suzuki polycondensation reaction. The electron‐rich alkynes underwent the “click chemistry”‐type quantitative addition reaction with strong acceptor molecules, such as tetracyanoethylene (TCNE) and 7,7,8,8‐tetracyanoquinodimethane (TCNQ), resulting in the formation of donor–acceptor chromophores. All polymers showed excellent solubilities in the common organic solvents as well as good thermal stabilities with their 5% decomposition temperatures exceeding 230 °C. The TCNE‐/TCNQ‐adducted polymers displayed well‐defined charge‐transfer (CT) bands in the low energy region. The CT energy of the TCNE‐adducted polymer was 2.56 eV (484 nm), which was much greater than that of the TCNQ‐adducted polymer [1.65 eV (750 nm)]. This result was supported by the electrochemical measurements. The electrochemical band gaps of the TCNE‐adducted polymers were much greater than those of the corresponding TCNQ‐adducted polymers. Furthermore, the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels, determined from the first oxidation and first reduction peak potentials, respectively, decreased with the increasing acceptor addition amount. All these results suggested that the energy levels of the polythiophene derivative can be tuned by varying the species and amount of the acceptor molecules using this postfunctionalization method. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

New colorless substrates based on polynorbornene‐chlorinated polyimide copolymers and their application for flexible displays

Novel polynorbornene (PNB)‐polyimide (PI) copolymers were synthesized based on poly(N‐phenyl‐exo‐norbornene‐5,6‐dicarboximide) (PPhNI) and chlorinated PI (BPDA/TCDB). Polynorbornene copolymers (PNCs) with diverse compositions of anhydride were synthesized via ring opening metathesis polymerization (ROMP) of N‐phenyl‐exo‐norbornene‐5,6‐dicarboximide (PhNI) and exo‐7‐oxanorbornene‐5,6‐dicarboxylic anhydride(exo‐NA), followed by copolymerization through a reaction with aromatic dianhydride (3,3′,4,4′‐biphenyltetra‐carboxylic dianhydride, BPDA) and tetrachlorinated diamine (2,2′,5,5′‐tetrachlorobenzidine, TCDB). The copolymer (PNIC) films exhibited good optical transparency with a transmittance of around 70% at 400 nm and a good thermal stability with a glass transition temperature at 276–300 °C. These flexible films also resisted most organic solvents and chemicals, such as methanol, acetone, tetrahydrofuran, N‐methylpyrrolidone, ethyl acetate, hydrochloric acid, sodium hydroxide, and hydrogen peroxide, etc. Indium tin oxide (ITO) coated thin films were prepared at various substrate deposition temperatures with a radio frequency (r.f.) planar magnetron sputtering system. The ITO thin films that were deposited onto the PNIC copolymer substrates had good electrical and optical properties. An organic light‐emitting device (OLED) was fabricated using the PNIC copolymer substrate with a structure of PNIC08/ ITO (anode)/hole‐transporting layer (HTL)/emitting & electron‐transporting layer (EM&ETL)/aluminum (cathode). The flexible OLED fabricated on the ITO‐grown PNIC substrate exhibited a performance that was comparable to corresponding ITO‐grown glass substrates. Therefore, the ITO‐grown PNIC substrate could possibly be a promising candidate as a substrate for flexible displays. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1806–1814, 2010     

Pulsed‐laser–deposited and plasma‐polymerized polytetrafluoroethylene (PTFE)‐like thin films: A comparative study on PTFE‐specific properties

Glass‐like and structural first‐order phase transitions are investigated in polytetrafluoroethylene (PTFE) foils and PTFE‐like films prepared by pulsed‐laser deposition (PLD) and plasma polymerization (PP). A structural comparison of the investigated polymers is performed by infrared spectroscopy and dielectric dilatometry. It is shown that dielectric dilatometry (the measurement of the susceptance vs. temperature) provides a simple and elegant means for detecting volumetric transitions in thin nonpolar polymer films. In conventional PTFE foils, the known glass‐like and structural first‐order phase transitions are identified. The structure of pulsed‐laser deposited PTFE strongly depends on the target material, ranging from highly crystalline films showing only structural phase transitions to films strongly deviating from PTFE foils, with structural characteristics comparable to plasma‐polymerized fluorocarbons. The dielectric loss of the highly crystalline PLD films compares favorably with conventional PTFE foils, making the films attractive for new applications in miniature electret devices. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2115–2125, 1999