Synthesis of a new salphen‐type titanium complex and its application in ethylene polymerization and copolymerization

TiCl₂[salphen(di‐tBu)] was synthesized, characterized and employed as pre‐catalyst in ethylene homo‐ and copolymerization with propylene, 1‐octene and 10‐undecen‐1‐ol. X‐ray diffraction study on the titanium complex revealed a distorted octahedral coordination of the central metal with a trans‐Cl, cis‐O, cis‐N arrangement. The complex combined with MAO afforded moderate catalytic activities in ethylene polymerization. Furthermore the catalyst not only copolymerized ethylene with apolar monomer (propylene and 1‐octene), but also possessed significant capability of incorporation with polar monomer (10‐undecen‐1‐ol). Only single insertion of 1‐octene unit in ethylene‐co‐1‐octene polymer was detected by ¹³C NMR spectrum. Copyright © 2010 John Wiley & Sons, Ltd.     

New polymers derived from 4‐vinylsilylbenzocyclobutene monomer with good thermal stability,excellent film‐forming property,and low‐dielectric constant

A series of benzocyclobutene (BCB) polymers derived from a new readily available monomer, 4‐(1′,1′‐dimethyl‐1′‐vinyl) silylbenzocyclobutene (4‐DMVSBCB), were conveniently prepared by radical and anionic polymerization. The homo‐ and co‐polymerization results show that the reactivity of 4‐DMVSBCB in anionic polymerization is relatively higher compared with radical polymerization. The molecular weight of 4‐DMVSBCB polymers and content of 4‐DMVSBCB can be controlled by anionic copolymerization. The introduction of rigid and crosslinkable BCB building blocks in side chains and carbosilanes in molecule gives rise to insulating materials with good film‐forming property, smooth and flat film surface, and low‐dielectric constants of 2.41–2.45, as preserving good thermal stability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

N‐(2‐benzimidazolylquinolin‐8‐yl)benzamidate half‐titanocene chlorides: Synthesis,characterization and their catalytic behavior toward ethylene polymerization

A series of N‐(2‐benzimidazolyquinolin‐8‐yl)benzamidate half‐titanocene chlorides, Cp′TiLCl ( C1 – C8 : Cp′ = C₅H₅, MeC₅H₄, or C₅Me₅; L = N‐(benzimidazolyquinolin‐8‐yl)benzamides)), was synthesized by the KCl elimination reaction of half‐titanocene trichlorides with the correspondent potassium N‐(2‐benzimidazolyquinolin‐8‐yl)benzamide. These half‐titanocene complexes were fully characterized by elemental and NMR analyses, and the molecular structures of complexes C2 and C8 were determined by the single‐crystal X‐ray diffraction. The high stability of the pentamethylcyclopentadienyl complex ( C8 ) was evident by no decomposing nature of its solution in air for one week. The oxo‐bridged dimeric complex ( C9 ) was isolated from the solution of the corresponding cyclopentadienyl complex ( C3 ) solution in air. Complexes C1 – C8 exhibited good to high catalytic activities toward ethylene polymerization and ethylene/α‐olefin copolymerization in the presence of methylaluminoxane (MAO) cocatalyst. In the typical catalytic system of C1/ MAO, the polymerization productivities were enhanced with either elevating reaction temperature or increasing the ratio of MAO to titanium precursor. In general, it was observed that higher the catalytic activity of the catalytic system lower the molecular weight of polyethylene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3154–3169, 2009     

Synthesis of phenanthroline‐terminated polymers and their Fe(II)‐complexes

Well‐defined mono‐ and bifunctional, phenanthroline‐terminated poly(ethylene glycol) and polyisobutylene capable of polymer network formation were synthesized. The starting materials mono‐ and bi‐phenanthroline‐ (phen) terminated poly(ethylene glycols) (mPEG‐phen, phen‐PEG‐phen) and polyisobutylenes (PIB‐phen, phen‐PIB‐phen) were prepared by the Williamson synthesis and characterized by means of ¹H NMR and MALDI‐TOF mass spectrometry. According to UV–Vis spectrophotometry and ESI‐TOF mass spectrometry, the phenanthroline‐terminated polymers underwent quantitative complex formation with ferrous ions in solution. The aqueous solution of mPEG‐phen shows self‐assembly behavior. Important parameters, such as critical micelle concentration and hydrodynamic radius of the aggregates were also determined. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2709–2715, 2010     

Homopolymerizations and random copolymerizations of olefins with amino‐substituted cyclopentadienylchromium complexes

1‐(2‐N,N‐Dimethylaminoethyl)‐2,3,4,5‐tetramethylcyclopentadienyl‐chromium dichloride ( 1 ), (2‐N,N‐dimethylaminoethyl)cyclopentadienylchromium dichloride ( 6 ), and (2‐N,N‐dimethylaminoethyl)indenylchromium dichloride ( 7 ) in the presence of modified methylaluminoxane exhibit high catalytic activities for the polymerization of ethylene with random copolymerizations of ethylene with propylene, ethylene with 1‐hexene, and propylene with 1‐hexene. These initiators conduct polymerizations to give high molecular weight polymers with low polydispersities. However, the stereoregularities are very poor in these reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2759–2771, 2002     

On the anionic homo‐ and copolymerization of ethyl‐ and butyl‐2‐cyanoacrylates

Ethyl‐(ECA) and butyl‐2‐cyanoacrylate (BCA) monomers of high purity and acidic stabilization were synthesized and anionically polymerized to homo‐ and copolymers in two different ways: by piperidine‐catalyzed bulk polymerization leading to transparent, brittle films (method A) and by polymerization in aqueous medium in the presence of sodium bicarbonate to obtain white powders (Method B). The molecular structure of the synthesized monomers, homopolymers and copolymers were corroborated by spectral methods. The polymers were studied further by thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), size exclusion chromatography (SEC) and proton nuclear magnetic resonance (¹H NMR). Controlling the composition of the monomer feed and the way the polymerization was performed, it was possible to obtain phase separated or homogeneous cyanoacrylate copolymers with glass transitions varying between the T_g of polyECA and that of polyBCA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5142–5156, 2008     

Styrene‐ethylene co‐oligomerization with bis‐(diphenylphosphino)‐amine/chromium catalysts and the use of the co‐oligomerization products in copolymerization reactions with metallocenes

Ethylene‐styrene (or 4‐methylstyrene) co‐oligomerization using various bis(diphenylphoshino)amine ligands in combination with chromium is discussed. GC analysis of the reaction mixture shows that various phenyl‐hexene and phenyl‐octene isomers are formed either through cotrimerization or cotetramerization. It seems that the more bulky ligands display lower selectivity to co‐oligomerization and favor ethylene homo‐oligomerization. Subsequent copolymerization of the oligomerization reaction mixture using a metallocene polymerization catalyst results in a copolymer with a branched structure as indicated by Crystaf and ¹³C NMR analysis. Assignments of the ¹³C NMR spectrum are proposed from an APT NMR experiment combined with calculated NMR chemical shift data using additivity rules. An indication of the ability of the different co‐oligomerization products to copolymerize into the polyethylene chain could be established from these assignments. Unreacted styrene and the more bulky isomers, 3‐phenyl‐1‐hexene and 3‐phenyl‐1‐octene, are not readily incorporated while branches resulting from the other isomers present in the co‐oligomerization reaction mixture are detected in the NMR spectrum. © 2008 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 46: 1488–1501, 2008     

Zeolite‐supported metallocene catalyst for ethylene/1‐hexene copolymerization

Commercial zeolite acid mordenite was thermally treated for use as a support for bis(n‐butyl‐cyclopentadienyl)zirconium dichloride [(n‐BuCp)₂ZrCl₂] for the further evaluation of ethylene/1‐hexene copolymerization. The polymerization time, temperature, and solvent, as well as the addition of tri(isobutyl)aluminum in the hexane medium, were evaluated. The catalytic activity and 1‐hexene content in the copolymer synthesized with the supported system were very near those obtained with the homogeneous precursor. A comonomer effect was observed for both systems. The polymerization rate profiles were obtained for ethylene polymerization, and the activation energy and monomer reactivity were calculated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3038–3048, 2004     

Structure‐property relationships in densely grafted π‐stacked polymers

Three methyl end‐capped oligo(ethylene glycol) (MOEG) ethers ( 1b‐d ) and a methoxyderivative ( 1a ) of benzofulvene monomer BF3k were synthesized and induced to polymerize spontaneously by solvent removal to obtain soluble π‐stacked polymers bearing densely grafted MOEG side chains (poly‐ 1b – d ) and model polymer poly‐ 1a. The physicochemical features (e.g., solubility, NMR, MALDI‐TOF, and absorption/emission spectra, as well as MWD, conformation plot, and thermal properties) of the synthesized polymers were compared in a structure‐property relationship study. This approach afforded the following evidence. The structure of poly‐ 1a – d is very similar to that of BF3k , suggesting that the polymerization mechanism is not affected by the presence of the electron‐rich methoxy group or bulkier MOEG side chains. However, the latter appear to be capable of affecting the conformational behavior of the polymer backbone. The solubility of poly‐ 1a – d depends on the number of the oligo(ethylene glycol) monomeric units. In particular, poly‐ 1d , featuring a long MOEG side chain (n = 9), shows an amphiphilic character and is soluble in a number of organic solvents, whereas it interacts with water to give isolated macromolecules in equilibrium with nanosized water‐soluble aggregates. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2446–2461, 2010     

Chemistry of olefin polymerization reactions with chromium‐based catalysts

Detailed GC analysis of oligomers formed in ethylene homopolymerization reactions, ethylene/1‐hexene copolymerization reactions, and homo‐oligomerization reactions of 1‐hexene and 1‐octene in the presence of a chromium oxide and an organochromium catalyst is carried out. A combination of these data with the analysis of ¹³C NMR and IR spectra of the respective high molecular weight polymerization products indicates that the standard olefin polymerization mechanism, according to which the starting chain end of each polymer molecule is saturated and the terminal chain end is a C?C bond (in the absence of hydrogen in the polymerization reactions), is also applicable to olefin polymerization reactions with both types of chromium‐based catalysts. The mechanism of active center formation and polymerization is proposed for the reactions. Two additional features of the polymerization reactions, co‐trimerization of olefins over chromium oxide catalysts and formation of methyl branches in polyethylene chains in the presence of organochromium catalysts, also find confirmation in the GC analysis. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5330–5347, 2008     

A novel aromatic–aliphatic copolyester consisting of poly(1,4‐dioxan‐2‐one) and poly(ethylene‐co‐1,6‐hexene terephthalate): Preparation,thermal, and mechanical properties

A novel multiblock aromatic–aliphatic copolyester poly(ethylene‐co‐1,6‐hexene terephthalate)‐copoly(1,4‐dioxan‐2‐one) (PEHT‐PPDO) was successfully synthesized via the chain‐extension reaction of dihydroxyl teminated poly(ethylene‐co‐hexane terephthalate) (PEHT‐OH) with dihydroxyl teminated poly(1,4‐dioxan‐2‐one) (PPDO‐OH) prepolymers, using toluene‐2,4‐diisocyanate as a chain extender. To produce PEHT‐OH prepolymer with an appropriate melting point which can match the reaction temperature of PEHT‐OH prepolymer with PPDO‐OH prepolymer, 1,6‐hexanediol was used to disturb the regularity of poly(ethylene terephthalate) segments. The chemical structures and molecular weights of PEHT‐PPDO copolymers were characterized by ¹H NMR, FTIR, and GPC. The DSC data showed that PPDO‐OH segments were miscible well with PEHT‐OH segments in amorphous state and that the crystallization of copolyester was predominantly contributed by PPDO segments. The TGA results indicated that the thermal stability of PEHT‐PPDO was improved comparing with PPDO homopolymer. The novel aromatic–aliphatic copolyesters have good mechanical properties and could find applications in the field of biodegradable polymer materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2828–2837, 2010     

Synthesis of polyethylene and polypropylene containing fluorene units in the side chain

Copolymerizations of ethylene or propylene and allyl monomers containing 9‐fluorenyl group, diallyl‐di‐9‐fluorenylsilane (DAFS), 9,9‐diallylfluorene (DAF), and 9‐allylfluorene (AF), were investigated with various zirconocene catalysts using methylaluminoxane as a cocatalyst. The bridged zirconocene catalysts, especially a syndioselective catalyst, showed a higher reactivity for all the comonomers than the nonbridged catalysts. DAFS was mainly incorporated into the polymer chain via cyclization insertion, whereas DAF was copolymerized via both 1,2‐ and cyclization insertions. Cyclization selectivity, ratio of cyclized insertion unit, of DAF in the copolymerization with propylene was higher than that in the copolymerization with ethylene. Copolymerization with AF yielded low‐molecular weight copolymer because of frequent chain transfer reaction. Optical properties of the propylene based‐copolymers were investigated by UV‐vis and photoluminescence spectroscopy, and absorption‐ and emission‐derived from fluorenyl groups were detected in the copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3542–3552, 2010     

Imino‐indolate half‐titanocene chlorides: Synthesis and their ethylene (co‐)polymerization

A series of imino‐indolate half‐titanocene chlorides, Cp′Ti(L)Cl₂ ( C1 – C7 : Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = imino‐indolate ligand), were synthesized by the reaction of Cp′TiCl₃ with sodium imino‐indolates. All complexes were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. Moreover, the molecular structures of two representative complexes C4 and C6 were confirmed by single crystal X‐ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activities for ethylene polymerization (up to 7.68 × 10⁶ g/mol(Ti)·h) and ethylene/1‐hexene copolymerization (up to 8.32 × 10⁶ g/mol(Ti)·h), producing polyolefins with high molecular weights (for polyethylene up to 1808 kg/mol, and for poly(ethylen‐co‐1‐hexene) up to 3290 kg/mol). Half‐titanocenes containing ligands with alkyl substituents showed higher catalytic activities, whereas the half‐titanocenes bearing methyl substituents on the cyclopentadienyl groups showed lower productivities, but produced polymers with higher molecular weights. Moreover, the copolymerization of ethylene and methyl 10‐undecenoate was demonstrated using the C1 /MAO catalytic system. The functionalized polyolefins obtained contained about 1 mol % of methyl 10‐undecenoate units and were fully characterized by several techniques such as FT‐IR, ¹H NMR, ¹³C NMR, DSC, TGA and GPC analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 357–372, 2009     

Solid‐phase thermal polymerization of macrocyclic ethylene terephthalate dimer using various transesterification catalysts

Thermal ring‐opening polymerization of a uniform macrocyclic ethylene terephthalate dimer with and without catalyst was investigated for the first time. Although polymerization progressed without a catalyst, the reaction was extremely slow and all the products were colored. Various transesterification catalysts were tested for their activity toward this ring‐opening polymerization. Among the various catalysts, 1,3‐dichloro‐1,1,3,3‐tetrabutyldistannoxane exhibited the highest catalytic activity, and a colorless polymer with a weight‐average molecular weight of 36,100 was obtained in 100% yield by heating for 3 min at 200 °C. It is noteworthy that our method does not need a vacuum because no side products are formed during the process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3360–3368, 2000     

Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate): Synthesis,characterization, and their catalytic behaviors for ethylene polymerization

A series of 6‐(benzimidazol‐2‐yl)‐N‐organylpyridine‐2‐carboxamide were synthesized and transformed into 6‐benzimidazolylpyridine‐2‐carboxylimidate as dianionic tridentate ligands. Bis(2‐(6‐methylpyridin‐2‐yl)‐benzimidazolyl)titanium dichloride ( C1 ) and titanium bis(6‐benzimidazolylpyridine‐2‐carboxylimidate) ( C2 – C8 ) were synthesized in acceptable yields. These complexes were systematically characterized by elemental and NMR analyses. Crystallographic analysis revealed the distorted octahedral geometry around titanium in both complexes C1 and C4 . Using MAO as cocatalyst, all complexes exhibited from good to high catalytic activities for ethylene polymerization. The neutral bis(6‐benzimidazolylpyridine‐2‐carboxylimidate)titanium ( C2 – C8 ) showed high catalytic activities and good stability for prolonged reaction time and elevated reaction temperature; however, C1 showed a short lifetime in catalysis as being observed at very low activity after 5 min. The elevated reaction temperature enhanced the productivity of polyethylenes with low molecular weights, whereas the reaction with higher ethylene pressure resulted in better catalytic activity and resultant polyethylenes with higher molecular weights. At higher ratio of MAO to titanium precursor, the catalytic system generated better activity with producing polyethylenes with lower molecular weights. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3411–3423, 2008     

Synthesis of novel branched ethylene/cyclopentene copolymers with only cis‐1,3‐enchained cyclopentene units using α‐diimine nickel(II) complexes in the presence of methylaluminoxane

The copolymerization of ethylene with cyclopentene catalyzed by three α‐diimine nickel(II) complexes in the presence of methylaluminoxane (MAO) was investigated. High‐molecular‐weight branched ethylene/cyclopentene copolymers with only cis‐1,3‐enchained cyclopentene units, which has not been reported previously, were obtained. The catalytic activity, cyclopentene incorporation, copolymer molecular weight, and molecular‐weight distribution could be controlled over a wide range through the variation of the catalyst structure and polymerization conditions, including cyclopentene concentration in the feed and polymerization temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2186–2192, 2008     

Factors affecting product distributions in ethylene/styrene copolymerization by (aryloxo)(cyclopentadienyl)titanium complexes‐MAO catalyst systems

Ethylene/styrene copolymerizations using Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* (C₅Me₅, 1 ), 1,2,4‐Me₃C₅H₂ ( 2 ), tert‐BuC₅H₄ ( 3 )]‐MAO catalyst systems were explored under various conditions. Complexes 2 and 3 exhibited both high catalytic activities (activity: 504–6810 kg‐polymer/mol‐Ti h) and efficient styrene incorporations at 25, 40°C (ethylene 6 atm), affording relatively high molecular weight poly (ethylene‐co‐styrene)s with unimodal molecular weight distributions as well as with uniform styrene distributions (M_w = 6.12–13.6 × 10⁴, M_w/M_n = 1.50–1.71, styrene 31.7–51.9 mol %). By‐productions of syndiotactic polystyrene (SPS) were observed, when the copolymerizations by 1 – 3 ‐MAO catalyst systems were performed at 55, 70 °C (ethylene 6 atm, SPS 9.0–68.9 wt %); the ratios of the copolymer/SPS were affected by the polymerization temperature, the [styrene]/[ethylene] feed molar ratios in the reaction mixture, and by both the cyclopentadienyl fragment (Cp′) and anionic ancillary donor ligand (L) in Cp′TiCl₂(L) (L = Cl, O‐2,6‐ⁱPr₂C₆H₃ or N=C^tBu₂) employed. Co‐presence of the catalytically‐active species for both the copolymerization and the homopolymerization was thus suggested even in the presence of ethylene; the ratios were influenced by various factors (catalyst precursors, temperature, styrene/ethylene feed molar ratio, etc.). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4162–4174, 2008     

Boehmite nanorod‐reinforced‐polyethylenes and ethylene/1‐octene thermoplastic elastomer nanocomposites prepared by in situ olefin polymerization and melt compounding

Nanocomposites of polyethylene (HDPE) and poly(ethylene‐co‐1‐octene) thermoplastic elastomers, both containing boehmites with variable sizes, shapes, and aspect ratios (1–20), were prepared by means of in situ olefin polymerization and melt compounding. The in situ olefin polymerization in the presence of boehmite nanorods afforded nanocomposites containing 4–8 wt % of boehmite. In an alternative process, the in situ olefin polymerization was used to produce polyolefins with high boehmite content of 50 wt % as masterbatches for polyolefin melt compounding with ethylene homo‐ and copolymers. The addition of the boehmite nanofillers improved the stiffness without sacrificing high elongation at break. The stiffness, as expressed by Young's modulus, increased with increasing boehmite aspect ratio. In case of thermoplastic elastomer nanocomposites the increase of stiffness was accompanied by a simultaneous increase of elongation at break. According to transmission electron microscopy (TEM), fine dispersion of the polar boehmite nanorods and nanoplatelets within the nonpolar hydrocarbon polymer matrix was obtained without requiring the addition of special dispersing agents or functionalized polyolefin compatibilizers. The comparison of melt compounding of polyethylene with boehmites or polyethylene/boehmite masterbatches revealed that compounding of masterbatches prepared by in situ polymerization filling afforded much finer and more uniform nanoboehmite dispersions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2755–2765, 2008     

Cleavable multiblock copolymer synthesized by ring‐opening metathesis copolymerization of cyclooctene and macrocyclic olefin and its hydrolysis to give carboxyl‐telechelic polymer

A novel cleavable multiblock copolymer was synthesized by ring‐opening metathesis polymerization (ROMP) of cyclooctene (COE) and a flexible 27‐membered macrocyclic olefin (MCO), which is acted as the spacer to collect the polymer structure block by block. MCO 2 was prepared via ring‐closing metathesis of the long chain alkyldiene, and then 2 was well‐ conducted ROMP with COE to provide the multiblock copolymer [Poly(COE)‐ 2 ]_m consisting of homo‐Poly(COE) blocks and ring‐opened 2 segments with different molecular weights (M_n = 30.0 – 249.6 × 10³) and polydispersity index (PDI) within 1.45–1.67 as variation of the feed ratio of COE to 2 . The multiblock copolymer chain containing weak ester linkage can be cleaved under alkali condition to afford the carboxyl‐telechelic Poly(COE) blocks with much lower molecular weights (M_n,h = 3.6–35.7 × 10³) and slight higher PDIs (1.65–1.88). The average block number on multiblock copolymer chain was obtained from the ratio of M_n to M_n,h and was reached up to the value of 7–16. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 380–388, 2010