Synthesis of a norbornene monomer having cyclic carbonate moiety based on CO2 fixation and its transition metal‐catalyzed polymerizations

A norbornene monomer bearing cyclic carbonate moiety ( NB‐CC ) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon dioxide under atmospheric pressure, which was efficiently catalyzed by lithium bromide. NB‐CC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene), of which side chain inherited the cyclic carbonate moiety from the monomer without any deterioration. The same ROMP system was applicable to the copolymerization of NB‐CC and 5‐butyl‐2‐norbornene ( BNB ), which afforded the corresponding copolymer with a composition ratio same as a feed ratio. In addition, by using a catalytic system consisted of palladium (II) acetate/tricyclohexylphosphine/triphenylcarbenium tetrakis(pentafluorophenyl)borate, the copolymerization of NB‐CC and BNC proceeded successfully in a vinyl addition polymerization mode to give the corresponding poly(norbornene) having CC moiety in the side chain. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3896–3902, 2010     

Synthesis of reactive poly(norbornene): Ring‐opening metathesis polymerization of norbornene monomer bearing cyclic dithiocarbonate moiety

A norbornene monomer bearing cyclic dithiocarbonate moiety (NB‐DTC) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon disulfide. NB‐DTC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene). The dithiocarbonate moiety incorporated into the side chain of the obtained poly(norbornene) reacted with amine to afford the corresponding thiourethane moiety with thiol group, which underwent oxidative S‐S coupling and/or addition reaction to the C‐C double bond in the main chain, leading to formation of a cross‐linked polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Novel routes to epoxy functionalization of PHA‐based electrospun scaffolds as ways to improve cell adhesion

Straightforward and versatile routes to functionalize the surface of poly(3‐hydroxyalkanoate) (PHA) electrospun fibers for improving cell compatibility are reported under relatively mild conditions. The modification of nanofibrous PHAs is implemented through two different methodologies to introduce epoxy groups on the fiber surface: (1) preliminary chemical conversion of double bonds of unsaturated PHAs into epoxy groups, followed by electrospinning of epoxy‐functionalized PHAs blended with nonfunctionalized PHAs, (2) electrospinning of nonfunctionalized PHAs, followed by glycidyl methacrylate grafting polymerization under UV irradiation. The latter approach offers the advantage to generate a higher density of epoxy groups on the fiber surface. The successful modification is confirmed by ATR‐FTIR, Raman spectroscopy, and TGA measurements. Further, epoxy groups are chemically modified via the attachment of a peptide sequence such as Arg‐Gly‐Asp (RGD), to obtain biomimetic scaffolds. Human mesenchymal stromal cells exhibit a better adhesion on the latter scaffolds than that on nonfunctionalized PHA mats. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 816–824     

Tertiary amine-functionalized polymers by atom transfer radical polymerization

The quantitative synthesis of tertiary amine-functionalized polymers by atom transfer radical polymerization is reported. Tertiary amine-functionalized polystyrene was prepared with the adduct of 1-(bromoethyl)benzene with 1-(4-dimethyl-aminophenyl)-1-phenylethylene as an initiator in the atom transfer radical polymerization of styrene in the presence of a copper (I) bromide/2,2′-bipyridyl catalyst system. The polymerization proceeded via a controlled free-radical polymerization process to afford quantitative yields of the corresponding tertiary amine-functionalized polystyrene with predictable number-average molecular weights (1600–4400), narrow molecular weight distributions (1.09–1.31), and an initiator efficiency of 0.95. The polymerization process was monitored by gas chromatographic analysis. The tertiary amine-functionalized polymers were characterized by thin-layer chromatography, size exclusion chromatography, potentiometry, and spectroscopy. All experimental evidence was consistent with quantitative functionalization via the 1,1-diphenylethylene derivative. Polymerization kinetic measurements showed that the polymerization reaction followed first-order-rate kinetics with respect to monomer consumption and that the number-average molecular weight increased linearly with monomer conversion. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2058–2067, 2001     

Epoxy‐based networks combining chemical and supramolecular hydrogen‐bonding crosslinks

We combine the supramolecular chemistry of heterocyclic ureas with the chemistry of epoxides to synthesize new crosslinked materials incorporating both chemical and supramolecular hydrogen‐bonded links. A two‐step facile and solvent‐free procedure is used to obtain chemically and thermally stable networks from widely available ingredients: epoxy resins and fatty acids. The density of both chemical and physical crosslinks is controlled by the stoichiometry of the reactants and the use of a proper catalyst to limit side reactions. Depending on the stoichiometry, a wide range of thermomechanical properties can be attained. The method can be used to produce elastomeric objects of complex shapes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1133–1141, 2010     

Synthesis of polymeric 1‐iminopyridinium ylides as photoreactive polymers

Two synthetic routes to polymeric 1‐imino pyridinium ylides as new photoreactive polymeric architectures were investigated. In the first approach, polymerization of newly synthesized 1‐imino pyridinium ylide containing monomers yielding their polymeric analogues was achieved by free radical polymerization. Alternatively, reactive precursor polymers were synthesized and converted into the respective 1‐imino pyridinium ylide polymers by polymer analogous reactions on reactive precursor polymers. Quantitative conversion of the reactive groups was achieved with pentafluorophenyl ester containing polymers and newly synthesized photoreactive amines as well as by the reaction of poly(4‐vinylbenzoyl azide) with a photoreactive alcohol. The polymers obtained by both routes were examined regarding their photoreaction products and kinetics in solution as well as in thin polymer films. Contact angle measurements of water on the polymer films before and after irradiation showed dramatic changes in the hydrophilicity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 832–844, 2010     

Hybrid organic/inorganic epoxy resins prepared by frontal polymerization

The syntheses of hybrid epoxy resins made from different ratios among bisphenol‐A diglycidyl ether, 3‐glycidoxypropyltrimethoxysilane (GPTMS), and diethylenetriamine were successfully performed by using frontal polymerization. Conversions were always almost quantitative, and, because of the use of this alternative convenient technique, materials were prepared in very short times. Samples were characterized by DSC, TGA, IR spectroscopy, and solvent extraction. It was found that those materials containing a relatively high‐Si amount exhibit two different transition temperatures, with the highest one that increases as the content of GPTMS raises. The analogies and the differences with the analogous samples prepared by the classical batch technique are discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of two classes of hyperstar polymers bearing hyperbranched cores grafted with linear arms

New hyperstar polymers (HSP) consisting of two different hyperbranched (hb) aromatic/aliphatic cores grafted with linear polymer arms were successfully synthesized. The hb cores were based on either hb poly(vinylbenzylchloride) synthesized by SCVP‐ATRP or hb polyester from a polycondensation reaction. For the core‐first approach, the hb cores have been modified to hb macroinitiators initiating either the cationic ring‐opening polymerization of oxazolines (Oxa) or the atom transfer radical polymerization of alkylmethacrylates. For potential use as reactive binders in epoxy coatings the HSPs were equipped with a defined amount of OH‐groups during arm growth via controlled block‐copolymerization with nonfunctionalized and OH‐functionalized monomers, either an oxazoline (OH)Oxa (2‐[1‐(hydroxymethyl)ethyl]‐oxazoline) or a methacrylate HEMA (2‐hydroxyethyl methacrylate). The amount of OH‐groups could be well adjusted in this way. The hyperstars were comprehensively characterized with respect to chemical structure and molecule dimension. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

UV‐ignited frontal polymerization of an epoxy resin

By combining frontal polymerization and radical‐induced cationic polymerization, it was possible to cure thick samples of an epoxy monomer bleached by UV light. The effect of the relative amounts of cationic photoinitiator and radical initiator was thoroughly investigated and was related to the front's velocity and its maximum temperature. The materials obtained were characterized by quantitative conversion also in the deeper layers, not reached by UV light. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2066–2072, 2004     

Mechanical properties of magnetically oriented epoxy

The microstructure of an epoxy system oriented in high magnetic fields (15–25 T) has been observed to consist of highly oriented domains at the molecular level along the direction of the applied field. The changes in the microstructure have been characterized as a function of the magnetic‐field strength and have been investigated microscopically and with wide‐angle X‐ray diffraction. The mechanical properties of the epoxy have been examined in light of nanoindentation experiments at different load levels. The basic results of the experimental investigations for the effect of high magnetic fields on the structure and property of the epoxy are presented. Nanoindentation testing has revealed large differences in the nanomechanical behavior for thermomagnetically processed epoxy specimens. The differences can be ascribed to the microstructural changes (reorientation) of the polymer at the molecular level. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1586–1600, 2004     

Surface modification of UV‐cured epoxy resins by click chemistry

A novel method for surface modification of UV‐cured epoxy network was described. Photoinitiated cationic copolymerization of a bisepoxide, namely 3,4‐epoxy cyclohexylmethyl 3,4‐epoxycyclohexanecarboxylate (EEC) with epibromohydrine (EBH) by using a cationic photoinitiator, [4‐(2‐methylpropyl)phenyl]4‐methylphenyl‐iodonium hexafluorophosphate, in propylene carbonate solution was studied. The real‐time Fourier transform infrared spectroscopic, gel content determination and thermal characterization studies revealed that both EEC and EBH monomers take part in the polymerization and epoxy network possessing bromomethyl functional groups was obtained. The bromine functions of the cured product formed on the glass surface were converted to azide functionalities with sodium azide. Independently prepared alkyne functional poly(ethylene glycol) (PEG) was subsequently anchored to azide‐modified epoxy surface by a “click” reaction. Surface modification of the network through incorporation of hydrophilic PEG chain was evidenced by contact angle measurements. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2862–2868, 2010     

Morphology and dielectric properties of an epoxy network modified by end‐functionalized liquid polybutadiene

Epoxy resin networks modified with different functionalized liquid polybutadiene were characterized by scanning electron microscopy, atomic force microscopy (AFM), and dielectric thermal analysis techniques. Different morphologies were observed for these different systems, which were attributed to different interaction degrees between the components. Hydroxyl‐terminated polybutadiene (HTPB) and carboxyl‐ terminated polybutadiene (CTPB) resulted in epoxy networks with two‐phase morphology that differed in rubber particle size. The use of isocyanate‐terminated polybutadiene (NCOTPB) resulted in transparent thermoset material, whose rubber domains were in the nanoscale dimension, only detected by the AFM technique. The different morphological aspects in these epoxy systems also affected the dielectric properties. The epoxy–HTPB network exhibited two low temperature relaxation peaks corresponding to two different phases present in the system, whereas the epoxy–CTPB or epoxy–NCOTPB systems, whose rubber particles are well adhered to the epoxy matrix by chemical bonds, displayed only one single low temperature relaxation peak. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4053–4062, 2004     

Pore size modification of macroporous crosslinked poly(dicyclopentadiene)

This article describes the pore size modification and in situ surface functionalization of macroporous crosslinked poly(dicyclopentadiene), produced by chemically induced phase separation, with norbornene‐functionalized poly(ethylene glycol) telechelic oligomers. The microstructure of the open porosity materials produced with this technique consisted of agglomerated particles. The incorporation of these telechelic oligomers allowed a substantial decrease in the pore size and a related increase in the internal surface area. These functionalized oligomers acted as stabilizers around the primary particles produced by phase separation and blocked their growth so that the materials resulting from the agglomeration of these smaller particles showed finer microstructures. The resulting porous materials were characterized by scanning electron microscopy, density measurements, nitrogen adsorption, and mercury porosimetry. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2036–2046, 2003     

Basic amino acid assisted‐fabrication of rectangular nanotube,circular nanotube,and hollow microsphere of polyaniline: Adjusting and controlling effect of pH value

This work reports a simple and effective method to prepare polyaniline (PANI) nanotubes with rectangular or circular cross section and hollow microspheres by using basic amino acids L ‐lysine or L ‐arginine as dopants and pH buffer agents, respectively. The research reveals that the pH value of the reaction solution at the beginning stage is a crucial factor to form PANI microstructures. The L ‐lysine and L ‐arginine have isoelectric point 9.74 and 10.76, which can maintain reaction solution at high pH value at the beginning reaction and assist aniline to couple in ortho‐position forming phenazine unit in the oligomer chain. The oligomer produces rectangular nanorods or microspheres by interaction. These oligomer microstructures act as templates for further polymerization to form PANI rectangular nanotubes and hollow microspheres. Decreasing the concentration of the basic amino acid or using acidic amino acid, the round nanotubes are formed. This method provides a simple route to prepare PANI microstructures with different morphologies without any foreign template or surfactant, and raises a new view on the polymerization process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thiol‐epoxy “click” chemistry: Application in preparation and postpolymerization modification of polymers

Base‐catalyzed reaction between a thiol and an epoxide group is a simple fusion process that leads to the formation of a β‐hydroxythio‐ether linkage. This reaction is efficient, regio‐selective, and fast. In addition, it produces a reactive hydroxyl group upon completion. Therefore, it is of considerable potential in synthesis of reactive and functional soft materials. Here, we discuss the fundamental aspects of this process, the so‐called thiol‐epoxy “click” reaction, and its utility in the preparation and post‐polymerization functionalization of polymers and crosslinked networks. Furthermore, its application in surface modification of solid substrates is also considered. Finally, utility of multifunctional materials created using the thiol‐epoxy reaction is discussed in the biomedical arena. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3057–3070     

Hydrazine‐functionalized latexes

The noncommercial functional monomer 4‐vinylbenzyl hydrazine (VBH) was synthesized and subsequently copolymerized with styrene (St) by means of different batch and semicontinuous seeded emulsion polymerization processes, so as to obtain hydrazine‐functionalized nanoparticles. The effect of pH, surfactant and initiator amounts, ratio VBH/St, reaction temperature, and ratio acetone/water were studied. Due to the amphiphilic character of VBH at acid pH, the hydrazine groups of the functionalized comonomer were masked with acetone to form hydrazone groups. Secondary nucleations were avoided by using the protected VBH comonomer; however, a decreased radical efficiency achieving limited conversion was observed. Controlling the cationic initiator concentration, complete conversions together with the neat growth of the seed particles were obtained in the semicontinuous seeded emulsion polymerization of styrene and VBH protected with acetone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6201–6213, 2009     

Maleimide‐based thiol reactive multiarm star polymers via Diels‐Alder/retro Diels‐Alder strategy

Multiarm star polymers containing thiol‐reactive maleimide groups at their core have been synthesized by utilization of atom transfer radical polymerization (ATRP) of various methacrylates using a masked maleimide containing multiarm initiator. One end of the initiator contains multiple halogen groups that produce the star architecture upon polymerization and the other end contains a masked maleimide functional group. Unmasking of the maleimide group after the polymerization provides the thiol reactive maleimide core that is widely used in bioconjugation. Functionalization of the core maleimide group with a thiol containing tripeptide was used to demonstrate facile reactivity of the core of these multiarm polymers under reagent‐free conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2546–2556, 2010     

Structure and properties of PBO–PEO diblock copolymer modified epoxy

Amphiphilic poly(n‐butylene oxide)‐b‐poly(ethylene oxide) (PBO–PEO) diblock copolymers of various compositions were synthesized and studied as modifiers for epoxy resins. In blends of PBO–PEO, epoxy resin, and curing agent, the copolymers formed well‐defined microstructures that persisted upon curing of the epoxy. The resulting morphologies were vesicles, worm‐like micelles, and spherical micelles (in order of increasing size of PEO block), as well as transitional morphologies. Addition of 5% by weight of these block copolymers improved the fracture toughness of the epoxy by as much as 19 times with relatively small reduction in the elastic modulus. The highest level of toughness was measured in a system containing branched worm‐like micelles. Close examination of the fracture surfaces of these compositions suggests that although all the dispersed morphologies played a similar role to inclusions in particle‐toughened thermosets, crack deflection toughening contributed to the significantly higher levels of toughness in the worm‐like micelle systems. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Chem 43: 1950–1965, 2005     

A facile “graft from” method to prepare molecular‐level dispersed graphene–polymer composites

Graphene–polymer composites of positive‐charged poly(dimethyl aminoethyl acrylate), negative‐charged poly(acrylic acid), and neutral polystyrene were prepared by “graft from” methodology using reversible addition fragmentation chain transfer (RAFT) polymerization via a pyrene functional RAFT agent (PFRA) modified graphene precursor. Fluorescence spectroscopy and attenuated total reflection infrared (ATR‐IR) evidenced that the PFRA was attached on the graphene basal planes by π–π stacking interactions, which is strong enough to anti‐dissociation in the polymerization mixture up to 80°C. Atomic force microscopy (AFM) revealed that the thickness of a graphene–polymer sheet was about 4.0 nm. Graphene composites of different polymers with the same polymerization degree exhibited similar conductivity; however, when the polymer chain was designed as random copolymer the conductivity was significantly decreased. It was also observed that the longer the grafted polymer chains the lower the conductivity. ATR‐IR spectroscopy and thermogravimetric analysis were also performed to characterize the as‐prepared composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and proton conductivity studies of polystyrene‐based triazole functional polymer membranes

In this study, poly(vinylbenzylchloride) (PVBC) was produced by free‐radical polymerization of 4‐vinylbenzylchloride, and then it was functionalized with 3‐amino‐1,2,4‐triazole (ATri) and 1H‐1,2,4‐triazole (Tri). The composition of the polymers was verified by elemental analysis, and the structure was characterized by Fourier transform infrared and ¹³C‐nuclear magnetic resonance spectra. PVBC was modified by ATri with 68% and Tri with 50% yield. The polymers were doped with trifluoromethanesulfonic acid (TA) at various molar ratios, X = 0.5, 1, 2, and 3 with respect to aminotriazole and triazole units. Proton transfer from TA to the triazole rings was proved with Fourier transform infrared spectroscopy. Thermogravimetric analysis showed that the samples are thermally stable up to approximately 200 °C. Differential scanning calorimetry results illustrated the homogeneity of the materials. Under anhydrous conditions, PVBCATri3TA and PVBCTri3TA showed highest proton conductivity of 0.086 and 0.042 S/cm, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010