Accurate standard‐based quantification of X‐ray fluorescence data using metal‐contaminated plant tissue

Quantitative X‐ray fluorescence (XRF) measurements have been conducted on naturally lead‐contaminated samples. The calibration procedure using the ratio of fluorescence to Compton scattered radiation was investigated using Monte Carlo simulation. Experimental results with low‐energy photons (14 keV) and simulations show a very good linearity of the fluorescence to Compton ratio as a function of metal concentration. Lead (Pb), iron (Fe) and zinc (Zn) are measured in samples of Phaseolus vulgaris (bean seeds) that have been grown using a nutritive solution with different Pb dopings. Naturally contaminated samples are thus obtained. The calibration must be done for fixed conditions of X‐ray energy and scattering angle, while X‐ray beam intensity and detector to sample distance can change from one sample to another. Simulation allows to evaluate the matrix effect on the calibration curve, and shows that linearity is preserved even in the presence of other heavy elements in the fluorescence spectrum. However, calibration must be done using samples with similar matrix as it affects the slope of the curve. Copyright © 2010 John Wiley & Sons, Ltd.     

Feasibility of in‐line instruments for high‐resolution inelastic X‐ray scattering

Inelastic X‐ray scattering instruments in operation at third‐generation synchrotron radiation facilities are based on backreflections from perfect silicon crystals. This concept reaches back to the very beginnings of high‐energy‐resolution X‐ray spectroscopy and has several advantages but also some inherent drawbacks. In this paper an alternate path is investigated using a different concept, the `M⁴ instrument'. It consists of a combination of two in‐line high‐resolution monochromators, focusing mirrors and collimating mirrors. Design choices and performance estimates in comparison with existing conventional inelastic X‐ray scattering instruments are presented.     

Quantitative speciation of manganese oxide mixtures by RIXS/RRS spectroscopy

Resonant inelastic X‐ray scattering, also named X‐ray resonant Raman scattering, was recently used to discriminate local chemical environments. By means of this novel technique, the speciation of samples could be attained in a variety of samples and experimental conditions. Until now, this discrimination methodology had been applied only to pure compounds, being the speciation possible by two different mathematical treatments. Nevertheless, the effectiveness/sensitivity of this technique has not been tested yet in samples containing mixtures of oxides of the same element. In this work, the first results of quantitative speciation of mixtures of manganese compounds, using resonant inelastic X‐ray scattering/X‐ray resonant Raman scattering spectroscopy, are presented. The results show that it is possible to discriminate and quantify oxide mixtures of the same element in slightly different proportions, allowing a quantitative speciation of compound mixtures in a variety of experimental conditions, presenting also several advantages over conventional spectroscopic techniques. Copyright © 2017 John Wiley & Sons, Ltd.     

Determination of the Al content in aluminum‐modified SiO2 stationary phases using X‐ray scattering spectroscopy

This paper describes the determination of aluminum in the presence of silica using a method based on X‐ray scattering spectrometry coupled with chemometric tools (principal component analysis and partial least squares) that treat samples according to their Al concentrations. Samples were prepared by mixing Al and Si oxides. X‐ray spectra of all samples, including pure oxides of aluminum and silicon, were submitted to the chemometric tools. Principal component analysis results show that it is possible to classify three subgroups of Al (low, medium and high Al content), whereas partial least squares 1 was used to construct calibration and cross‐validation models for Al in the presence of Si. The method is simple, fast, does not require sample dissolution prior to analysis, is of low cost and can be applied as a routine procedure. The method was used to quantify Al in some chromatographic stationary phases covered with a layer of Al₂O₃. Good correlations with low errors were obtained. Copyright © 2013 John Wiley & Sons, Ltd.     

Microcrystallography using single‐bounce monocapillary optics

X‐ray microbeams have become increasingly valuable in protein crystallography. A number of synchrotron beamlines worldwide have adapted to handling smaller and more challenging samples by providing a combination of high‐precision sample‐positioning hardware, special visible‐light optics for sample visualization, and small‐diameter X‐ray beams with low background scatter. Most commonly, X‐ray microbeams with diameters ranging from 50 µm to 1 µm are produced by Kirkpatrick and Baez mirrors in combination with defining apertures and scatter guards. A simple alternative based on single‐bounce glass monocapillary X‐ray optics is presented. The basic capillary design considerations are discussed and a practical and robust implementation that capitalizes on existing beamline hardware is presented. A design for mounting the capillary is presented which eliminates parasitic scattering and reduces deformations of the optic to a degree suitable for use on next‐generation X‐ray sources. Comparison of diffraction data statistics for microcrystals using microbeam and conventional aperture‐collimated beam shows that capillary‐focused beam can deliver significant improvement. Statistics also confirm that the annular beam profile produced by the capillary optic does not impact data quality in an observable way. Examples are given of new structures recently solved using this technology. Single‐bounce monocapillary optics can offer an attractive alternative for retrofitting existing beamlines for microcrystallography.     

A simple calibration procedure of polycapillary based portable micro‐XRF spectrometers for reliable quantitative analysis of cultural heritage materials

Portable micro‐X‐ray fluorescence (micro‐XRF) spectrometers mostly utilize a polycapillary X‐ray lens along the excitation channel to collect, propagate and focus down to few tens of micrometers the X‐ray tube radiation. However, the polycapillary X‐ray lens increases the complexity of the quantification of micro‐XRF data because its transmission efficiency is strongly dependent on the lens specifications and the propagated X‐ray energy. This feature results to a significant and not easily predicted modification of the energy distribution of the primary X‐ray tube spectrum. In the present work, we propose a simple calibration procedure of the X‐ray lens transmission efficiency based on the fundamental parameters approach in XRF analysis. This analytical methodology is best suited for compact commercial and portable micro‐XRF spectrometers. The developed calibration procedure is validated through the quantitative analysis of a broad range of samples with archeological relevance such as glasses, historical copper alloys, silver and gold alloys offering an overall accuracy of less than 10%–15%. Copyright © 2015 John Wiley & Sons, Ltd.     

The use of X‐ray interaction data to differentiate malignant from normal breast tissue at surgical margins and biopsy analysis

X‐ray interaction data, including measuring bio‐metal levels and scattering characteristics, are being shown to be a possible discriminating variable in the classification of human tissues. However, a major concern when using X‐ray interaction data in breast cancer material is that the samples are rarely 100% tumour because of the invasive nature of the disease. The work reported here includes a methodology to help overcome this limitation as the experimental protocol includes mapping the data to histological analysis of the measured samples. This work has shown how important it is to relate the measured X‐ray parameters to the histology of the samples, particularly the clinical information that describes the percentage of tumour within each sample. Levels of K, Ca, Zn, Fe, Cu, Br and Rb were evaluated using X‐ray fluorescence and compared between tumour breast tissue and normal surrounding breast tissue. The coherent scattering properties of each sample were also examined using an angular dispersive X‐ray diffraction technique. Multivariate modelling using soft independent modelling of class analogy was used to classify samples kept out of the modelling procedure. A significant increase (p < 0.01) in the levels of Rb, Zn and K was found in the tumour samples. The levels of these elements show a correlation with the percentage of tumour reported to be present in a given sample. The results of classifying unknown tissue samples are presented using two‐class and three‐class models that help to reveal the importance of sample histology in studies involving breast cancers. Copyright © 2013 John Wiley & Sons, Ltd.     

A three‐crystal spectrometer for high‐energy resolution fluorescence‐detected X‐ray absorption spectroscopy and X‐ray emission spectroscopy at SSRF

A Johann‐type spectrometer for the study of high‐energy resolution fluorescence‐detected X‐ray absorption spectroscopy, X‐ray emission spectroscopy and resonant inelastic X‐ray scattering has been developed at BL14W1 X‐ray absorption fine structure spectroscopy beamline of Shanghai Synchrotron Radiation Facility. The spectrometer consists of three crystal analyzers mounted on a vertical motion stage. The instrument is scanned vertically and covers the Bragg angle range of 71.5–88°. The energy resolution of the spectrometer ranges from sub‐eV to a few eV. The spectrometer has a solid angle of about 1.87 × 0^?3 of 4π sr, and the overall photons acquired by the detector could be 10⁵ counts per second for the standard sample. The performances of the spectrometer are illustrated by the three experiments that are difficult to perform with the conventional absorption or emission spectroscopy. Copyright © 2016 John Wiley & Sons, Ltd.     

Improved Rayleigh to Compton scattering ratio curves for mass attenuation coefficients determination for X‐ray fluorescence analysis

Nondestructive assays are essentials for certain types of sample materials, and, among those, the X‐ray fluorescence technique enables the determinations of stable elements, and there is an increasing effort on the development of equipment to suit the various needs. Nevertheless, a great difficulty on the analysis of unknown materials' composition is to account for self‐absorption of the fluorescence photons that must be considered in the elemental concentration calculation. The correlation between the Rayleigh to Compton scattering ratio to the mass attenuation coefficient has proved to follow a single polynomial function for the first 20 elements of the periodical table with a correlation factor higher than of 0.998 for the sixth order function. The Rayleigh to Compton scattering ratios for pure elements and the 22.16 keV photons, the main energy from an X‐ray tube with silver anode, were determined with the MCNP6 Monte Carlo computer code. Two scattering angles were considered. Reference samples were measured, and the calculated results were compared to the literature values of the mass attenuation coefficient for some known samples and showed to be within 20% for de 90° scattering angle. Only Lucite was slightly above 20%. Curve fit coefficients are also presented for the 7.11‐ and 17.40‐keV photon energies.     

First experiments on the Australian Synchrotron Imaging and Medical beamline,including investigations of the effective source size in respect of X‐ray imaging

The Imaging and Medical beamline at the Australian Synchrotron achieved `first light' in December 2008. Here, the first experiments performed on the beamline are reported, which involved both X‐ray imaging and tomography studies for a range of samples. The use of a plastic‐edge phantom for quantitative measurements of contrast and resolution proved to be very instructive and helped to confirm certain parameter values such as the effective horizontal source size, detector resolution and average X‐ray energy for the polychromatic beam.     

The determination of elements in welding fume by X‐ray spectrometry and UniQuant

Welding is a hazardous process with an associated risk of health effects related to the fume arising from the core metal, flux components and welding surface. X‐ray fluorescence (XRF) is commonly used to determine elemental concentrations as part of occupational hygiene investigations using conventional calibrations. A method is proposed to determine elements in welding fume using XRF and a fundamental parameter software package known as UniQuant^®. This was found to remove the need for special dust standards being prepared as the calibration used was based on a series of standards supplied with UniQuant that would cover all sample types. A conventional calibration and UniQuant calibration were set up and elements found in welding fume were determined from tin to titanium. Samples obtained from the Health and Safety Laboratory Workplace Analysis Scheme for Proficiency (WASP) programme were also analysed by both methods for nickel, iron, manganese and chromium. For the normal calibration, average recovery results for the WASP samples were between 92 and 103% of the target value with relative standard deviations of 3‐7%. For the UniQuant calibration, average recovery results for the WASP samples were between 97 and 112% of the target value with relative standard deviations of 3‐10%. These results are well within analytical performance expectations for the type of welding fume matrix analysed. The method was applied to real welding fume samples collected from workplaces. Copyright © 2011 John Wiley & Sons, Ltd.     

Performance on absolute scattering intensity calibration and protein molecular weight determination at BL16B1, a dedicated SAXS beamline at SSRF

The optical system and end‐station of bending‐magnet beamline BL16B1, dedicated to small‐angle X‐ray scattering (SAXS) at the Shanghai Synchrotron Radiation Facility, is described. Constructed in 2009 and upgraded in 2013, this beamline has been open to users since May 2009 and supports methodologies including SAXS, wide‐angle X‐ray scattering (WAXS), simultaneous SAXS/WAXS, grazing‐incidence small‐angle X‐ray scattering (GISAXS) and anomalous small‐angle X‐ray scattering (ASAXS). Considering that an increasing necessity for absolute calibration of SAXS intensity has been recognized in in‐depth investigations, SAXS intensity is re‐stated according to the extent of data processing, and the absolute intensity is suggested to be a unified presentation of SAXS data in this article. Theory with a practical procedure for absolute intensity calibration is established based on BL16B1, using glass carbon and water as primary and secondary standards, respectively. The calibration procedure can be completed in minutes and shows good reliability under different conditions. An empirical line of scale factor estimation is also established for any specific SAXS setup at the beamline. Beamline performance on molecular weight (MW) determination is provided as a straightforward application and verification of the absolute intensity calibration. Results show good accuracy with a deviation of less than 10% compared with the known value, which is also the best attainable accuracy in recent studies using SAXS to measure protein MW. Fast MW measurement following the demonstrated method also enables an instant check or pre‐diagnosis of the SAXS performance to improve the data acquisition.     

X‐ray beam‐position feedback system with easy‐to‐use beam‐position monitor

X‐ray beam‐position stability is indispensable in cutting‐edge experiments using synchrotron radiation. Here, for the first time, a beam‐position feedback system is presented that utilizes an easy‐to‐use X‐ray beam‐position monitor incorporating a diamond‐fluorescence screen. The acceptable range of the monitor is above 500 µm and the feedback system maintains the beam position within 3 µm. In addition to being inexpensive, the system has two key advantages: it works without a scale factor for position calibration, and it has no dependence on X‐ray energy, X‐ray intensity, beam size or beam shape.     

A high‐energy‐resolution resonant inelastic X‐ray scattering spectrometer at ID20 of the European Synchrotron Radiation Facility

An end‐station for resonant inelastic X‐ray scattering and (resonant) X‐ray emission spectroscopy at beamline ID20 of ESRF – The European Synchrotron is presented. The spectrometer hosts five crystal analysers in Rowland geometry for large solid angle collection and is mounted on a rotatable arm for scattering in both the horizontal and vertical planes. The spectrometer is optimized for high‐energy‐resolution applications, including partial fluorescence yield or high‐energy‐resolution fluorescence detected X‐ray absorption spectroscopy and the study of elementary electronic excitations in solids. In addition, it can be used for non‐resonant inelastic X‐ray scattering measurements of valence electron excitations.     

Multivariate calibrations for the SR‐TXRF determination of trace concentrations of lead and arsenic in the presence of bromine

A synchrotron radiation source and total reflection x‐ray fluorescence (SR‐TXRF) spectrometry were used for the determination of lead and arsenic in aqueous samples. To overcome the serious spectral interference between the two species and the overlap of another interfering element (bromine), a partial least‐squares regression (PLSR) method was used. The calibration models PLSR2 and PLSR1 were based on the x‐ray fluorescence emission signals (9.550–13.663 keV) for a set of 26 different mixtures containing the elements of interest, lead and arsenic, as well as bromine. The results obtained by PLSR1 and PLSR2 were compared with those obtained by the conventional univariate methodology. In the latter case, the areas of the secondary emission lines (Lβ for lead and Kβ for arsenic) were used to elaborate the analytical curves. The capacity of all optimized models was verified using five synthetic samples (external validation). Subsequently the best model was used to determine lead and arsenic recovery capacities when these metals are retained on two ion‐exchange resins (Dowex 50‐X8 and Dowex 1‐X8). The best multivariate model (PLSR1) allowed the determination of lead and arsenic with root mean square errors of prediction (RMSEPs) of 0.03 and 0.24 mg l^?1, respectively. The reduction of this parameter, with respect to the values obtained by conventional univariate methodology (0.26–0.03 mg l^?1 for lead and 0.30–0.24 mg l^?1 for arsenic), indicates that the proposed multivariate methodology really overcomes the problems associated with spectral interferences and minimizes the influence of an interfering agent (bromine). Copyright © 2005 John Wiley & Sons, Ltd.     

Optical performance of materials for X‐ray refractive optics in the energy range 8–100 keV

A quantitative analysis of the crucial characteristics of currently used and promising materials for X‐ray refractive optics is performed in the extended energy range 8–100 keV. According to the examined parameters, beryllium is the material of choice for X‐ray compound refractive lenses (CRLs) in the energy range 8–25 keV. At higher energies the use of CRLs made of diamond and the cubic phase of boron nitride (c‐BN) is beneficial. It was demonstrated that the presence of the elements of the fourth (or higher) period has a fatal effect on the functional X‐ray properties even if low‐Z elements dominate in the compound, like in YB₆₆. Macroscopic properties are discussed: much higher melting points and thermal conductivities of C and c‐BN enable them to be used at the new generation of synchrotron radiation sources and X‐ray free‐electron lasers. The role of crystal and internal structure is discussed: materials with high density are preferable for refractive applications while less dense phases are suitable for X‐ray windows. Single‐crystal or amorphous glass‐like materials based on Li, Be, B or C that are free of diffuse scattering from grain boundaries, voids and inclusions are the best candidates for applications of highly coherent X‐ray beams.     

Multivariate calibration in TXRF analysis of water

The aim of this paper is the application of multivariate linear calibration for quantitative determination of elements (K, Cd, Co, Hg, As, Pb, Ni, and Al) in water by using Total Reflection X‐ray Fluorescence Analysis with partial least squares (PLS) as a regression method to improve a result of common univariate method. In purpose of elimination of matrix effects in X‐ray fluorescence analysis, experimental design was applied. As a set of standard samples for multivariate calibration, a five‐level eight‐factor calibration design of 25 samples was chosen, ensuring mutual orthogonality of factors. For model's validation, the independent test set of 15 samples was examined. The collection of spectra and quantitative measurements was carried out on S2 PICOFOX. The PLS regression was performed by using software package STATISTICA. Quality indicators of multivariate calibration as slope (b) and intercept (a) of calibration, correlation coefficient (r), determination coefficient (R²), root mean square errors of calibration and of prediction, standard errors of calibration and of prediction, biases of calibration, and biases of prediction were calculated. These results were compared with the univariate model, and as a result, the multivariate calibration method exceeds the univariate one. The obtained results could be applied in a laboratory for an analysis of water solutions in the concentration range 0.05–2.00 mg/L. In many real situations, when analytical chemist deals with multi‐element mixtures, multivariate calibration approach combined with orthogonal design for multivariate calibration set could be successfully used to improve a conventional univariate calibration.     

A large‐solid‐angle X‐ray Raman scattering spectrometer at ID20 of the European Synchrotron Radiation Facility

An end‐station for X‐ray Raman scattering spectroscopy at beamline ID20 of the European Synchrotron Radiation Facility is described. This end‐station is dedicated to the study of shallow core electronic excitations using non‐resonant inelastic X‐ray scattering. The spectrometer has 72 spherically bent analyzer crystals arranged in six modular groups of 12 analyzer crystals each for a combined maximum flexibility and large solid angle of detection. Each of the six analyzer modules houses one pixelated area detector allowing for X‐ray Raman scattering based imaging and efficient separation of the desired signal from the sample and spurious scattering from the often used complicated sample environments. This new end‐station provides an unprecedented instrument for X‐ray Raman scattering, which is a spectroscopic tool of great interest for the study of low‐energy X‐ray absorption spectra in materials under in situ conditions, such as in operando batteries and fuel cells, in situ catalytic reactions, and extreme pressure and temperature conditions.