Borohydrido rare earth based coordinative chain transfer copolymerization: A convenient tool for tuning the microstructure of isoprene/styrene copolymers

A series of lanthanum and neodymium borohydrido complexes comprising the trisborohydrides Nd(BH₄)₃(THF)₃ ( 1a ) and La(BH₄)₃(THF)₃ ( 1b ) and the half‐lanthanidocenes Cp*Nd(BH₄)₂(THF)₂ ( 2a ) (Cp* = C₅Me₅) and Cp*La(BH₄)₂(THF)₂ ( 2b ) has been assessed for the chain transfer copolymerization of isoprene and styrene. A transmetalation process is occurring efficiently with the borohydride complexes in the presence of magnesium dialkyl. The transmetalation is accompanied by (i) a gradual decrease of the 1,4‐trans stereoselectivity of the reaction at the benefit of 3,4‐selectivity and (ii) an increase in the quantity of styrene inserted in the copolymer. This can be at least partially attributed to a magnesium induced co‐oligomerization of isoprene and styrene. By combining dialkylmagnesium and trialkylaluminum, a 1,4‐trans stereospecific reversible coordinative chain transfer copolymerization of isoprene and styrene is observed when the half‐lanthanocene 2b is used as precatalyst. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Reversible addition–fragmentation chain transfer polymerization of styrene under microwave irradiation

Reversible addition–fragmentation chain transfer (RAFT) polymerizations of styrene under microwave irradiation (MI), with or without azobisisobutyronitrile, were successfully carried out in bulk at 72 and 98 °C, respectively. The results showed that the polymerizations had living/controlled features, and there was a significant enhancement of the polymerization rates under MI in comparison with conventional heating (CH) under the same conditions. The polymer structures were characterized with ¹H and ¹³C NMR. The results showed the same structure for both polymers obtained by MI and CH. Successful chain‐extension experimentation further demonstrated the livingness of the RAFT polymerization carried out under MI. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6810‐6816, 2006     

Olefin polymerization by cyclopentadienyltris(dimethylamido)titanium(IV) complexes

Several titanium(IV) complexes of the type Cp′Ti(NMe₂)₃ [Cp′ = cyclopentadienyl ( 1 ), (dimethylaminoethyl)cyclopentadienyl ( 2 ), indenyl ( 3 ), and pentamethylcyclopentadienyl ( 4 )] were prepared, and their catalytic properties in the polymerization of α‐olefins were examined. Complexes 1 and 2 catalyzed the polymerization of ethylene in the presence of methylaluminoxane with a much higher activity than 3 or 4 . Complexes 3 and 4 polymerized ethylene with an activity similar to that of CpTiCl₃ ( 6 ). The preactivation of 2 , 3 , or 4 with trimethylaluminum (TMA) resulted in an increase in ethylene polymerization activities. Also, 1 and 2 were successfully used as ethylene/1‐hexene copolymerization catalysts, producing polymers with various amounts of 1‐hexene incorporation, depending on the amount of 1‐hexene in the feed mixture. Complex 1 likewise effectively polymerized styrene with a higher activity and higher syndiospecificity than the other three catalysts. Complexes 3 and 4 polymerized styrene with low syndiospecificity, whereas 2 produced only atactic polystyrene. The preactivation of 3 or 4 with TMA resulted in an increase in styrene polymerization activities and increased the syndiotacticity percentage of the polymers produced. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 313–319, 2001     

Structures and styrene polymerization activities of a series of nickel complexes bearing ligands of pyrazolone derivatives

A series of nickel complexes with β‐ketoamine ligands based on pyrazolone derivatives were synthesized by condensing pyrazolone with aniline, 2‐chloroaniline or naphthylamine and then reacting the produced β‐ketoamine with nickel halide. The solid‐state structures of these three complexes were determined by single‐crystal X‐ray diffraction. The bis(β‐ketoamine)nickel complexes are all air‐stable and can act as highly active catalyst precursors for styrene polymerization with activation of methylaluminoxane under mild reaction conditions. The activity of the catalyst for styrene polymerization is as high as 2.10 × 10⁵ g polymer/mol Ni h. Both steric and electronic effects were found to be important and influential for catalytic activity. Copyright © 2005 John Wiley & Sons, Ltd.     

Rare earths/main group metal alkyls catalytic systems for the 1,4‐trans stereoselective coordinative chain transfer polymerization of isoprene

A series of lanthanum and neodymium complexes comprising the half‐lanthanidocenes Cp*La(BH₄)₂(THF)₂ (Cp* = C₅Me₅) ( 1 ) and Cp*Nd(BH₄)₂(THF)₂ ( 2 ), the trisborohydrides La(BH₄)₃(THF)₃ ( 3 ) and Nd(BH₄)₃(THF)₃ ( 4 ), the trichlorides LaCl₃(THF)₃ ( 5 ) and NdCl₃(THF)₃ ( 6 ), the triisopropoxides La(OⁱPr)₃ ( 7 ) and Nd(OⁱPr)₃ ( 8 ), and the triaryloxide Nd(OC₆H₃‐^tBu₂‐2,6)₃ ( 9 ) has been assessed for the chain transfer polymerization of isoprene. A transmetalation process is occurring efficiently with the borohydride complexes in the presence of magnesium dialkyl. A gradual decrease of the 1,4‐trans stereoselectivity of the reaction is observed at the benefit of 3,4‐selectivity with increasing quantities of magnesium dialkyl. This can be at least partially attributed to the growth of 3,4 polyisoprene units onto the magnesium atom. By combining dialkylmagnesium and trialkylaluminum, a 1,4‐trans stereospecific reversible coordinative chain transfer polymerization of isoprene is reached using the half‐lanthanocene Cp*La(BH₄)₂(THF)₂. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The syndiospecific polymerization of styrene in the presence of fluorine‐containing half‐sandwich metallocenes

The syndiospecific polymerization of styrene was investigated with the fluorine‐containing half‐sandwich complexes η⁵‐pentamethylcyclopentadienyl titanium bis(trifluoroacetate) dimer, η⁵‐octahydrofluorenyl titanium tristrifluoro‐acetate, η⁵‐octahydrofluorenyl titanium dimethoxymonotrifluoroacetate, and η⁵‐octahydrofluorenyl titanium tris(pentafluorobenzoate) in comparison to known chloride and methoxide complexes in the presence of relatively low amounts of methylalumoxane and triisobutylaluminum. After the selection of effective reaction conditions for a solvent‐free polymerization, the following orders of decreasing polymerization activity of the titanium complexes can be observed: for pentamethylcyclopentadienyl compounds, Cp*Ti(OMe)₃ > [Cp*Ti(OCOCF₃)₂]₂O ≈ Cp*TiCl₃, and for octahydrofluorenyl compounds, [656]Ti(OMe)₃ > [656]Ti(OCOC₆F₅)₃ > [656]Ti(OCH₃)₂(OCOCF₃) > [656]Ti (OCOCF₃)₃. The [656]Ti complexes, showing the highest polymerization conversions at 70 °C and in comparison with the Cp* Ti compounds, turned out to be highly efficient catalysts for the syndiospecific styrene polymerization. The fluorine‐containing Cp* and [656]Ti complexes lead to much higher molecular weights than the chloride and methoxide compounds because of a reduction in chain‐limiting transfer reactions. The introduction of only one fluorine‐containing ligand into the coordination sphere of the metal compound is obviously sufficient for a significant increase in molecular weight. The active polymerization sites of the [656]Ti complexes with methylalumoxane and triisobutylaluminum are extremely stable during storage at room temperature in regard to their polymerization activity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2428–2439, 2000     

Reversible addition–fragmentation chain transfer/miniemulsion polymerization of butyl methacrylate in the presence of β‐cyclodextrin

In the presence of β‐cyclodextrin (β‐CD), reversible addition–fragmentation chain transfer (RAFT) polymerization has been successfully applied to control the molecular weight and polydispersity [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] in the miniemulsion polymerization of butyl methacrylate, with 2‐cyanoprop‐2‐yl dithiobenzoate as a chain‐transfer agent (or RAFT agent) and 2,2′‐azoisobutyronitrile (AIBN) as an initiator. β‐CD acted as both a stabilizer and a solubilizer, assisting the transportation of the water‐insoluble, low‐molecular‐weight RAFT agent into the polymerization loca (i.e., droplets or latex particles) and thereby ensuring that the RAFT agent was homogeneous in the polymerization loca. The polymers produced in the system of β‐CD exhibited narrower polydispersity (1.2 < M_w/M_n < 1.3) than those without β‐CD. Moreover, the number‐average molecular weight in the former case could be controlled by a definite amount of the RAFT agent. Significantly, β‐CD was proved to have a favorable effect on the stability of polymer latex, and no coagulum was observed. The effects of the concentrations of the RAFT agent and AIBN on the conversion, the molecular weight and its distribution, and the particle size of latices were investigated in detail. Furthermore, the influences of the variations of the surfactant (sodium dodecyl sulfate) and costabilizer (hexadecane) on the RAFT/miniemulsion polymerization were also studied. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2931–2940, 2005     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Polymerization of styrene oxide catalyzed by a diethylzinc/α-pinene oxide system

Styrene oxide (SO) was polymerized with a diethylzinc/α-pinene oxide (ZnEt₂/α-PiO) catalyst system under various conditions. Polystyrene oxide (PSO) thus obtained had a regular head-to-tail and isotactic structure. The number-average molecular weight reached 4.07 × 10⁴, and the molecular weight distribution was 5.7 (M_w/M_n). The glass-transition temperature of PSO was about 47 to 50 °C, depending on the molecular weight. The molar ratio of ZnEt₂ to α-PiO, 2 : 1, led to a high molecular weight of PSO in an 89.2% yield within 72 h. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4640–4645, 1999     

Simultaneous reversible addition fragmentation chain transfer and ring‐opening polymerization

The simultaneous ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) and 2‐hydroxyethyl methacrylate (HEMA) polymerization via reversible addition fragmentation chain transfer (RAFT) chemistry and the possible access to graft copolymers with degradable and nondegradable segments is investigated. HEMA and ε‐CL are reacted in the presence of cyanoisopropyl dithiobenzoate (CPDB) and tin(II) 2‐ethylhexanoate (Sn(Oct)₂) under typical ROP conditions (T > 100 °C) using toluene as the solvent in order to lead to the graft copolymer PHEMA‐g‐PCL. Graft copolymer formation is evidenced by a combination of size‐exclusion chromatography (SEC) and NMR analyses as well as confirmed by the hydrolysis of the PCL segments of the copolymer. With targeted copolymers containing at least 10% weight of PHEMA and relatively small PHEMA backbones (ca. 5,000–10,000 g mol^?1) the copolymer grafting density is higher than 90%. The ratio of free HEMA‐PCL homopolymer produced during the “one‐step” process was found to depend on the HEMA concentration, as well as the half‐life time of the radical initiator used. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3058–3067, 2008     

Synthesis and X‐ray Crystal Structures of Zinc Dichloride Complexes Supported by a β‐Diimine Ligand

β‐Diimine zinc dichloride complexes [CH₂{C(Me)NAr}₂]ZnCl₂ [Ar = Mes ( 1 ), Dipp ( 2 )] were obtained from the reactions of ZnCl₂ with the corresponding β‐iminoamines [ArN(H)C(Me)CHC(Me)NAr]. Complexes 1 and 2 were characterized by multinuclear NMR (¹H, ¹³C) and IR spectroscopy, elemental analyses as well as by single‐crystal X‐ray diffraction. The energy differences between the enamine‐imine tautomers of the β‐iminoamines were quantified by quantum chemical calculations.     

Synthesis of epoxy-terminated polymers by radical polymerization using α-(t-butylperoxymethyl)styrene as chain transfer agent

Epoxy-terminated polystyrene has been synthesized by radical polymerization using α-(t-butylperoxymethyl) styrene (TPMS) as the chain transfer agent. The chain transfer constants were found to be 0.66 and 0.80 at 60 and 70°C, respectively. The presence of epoxy end groups was confirmed by functional group modification of epoxide to aldehyde by treatment with BF₃.Et₂O. Thermal stability of TPMS was followed by differential scanning calorimetry and iodimetry. Thermal decomposition of TPMS in toluene follows first order kinetics with an activation energy of 23 kcal/mol. © 1996 John Wiley & Sons, Inc.     

Biocatalytic hydrogels by template polymerization

Novel ionizable hydrogels were prepared from poly(acrylic acid) and dimethylaminoethyl methacrylate monomer employing template polymerization technique as an alternative to traditional physical and chemical crosslinking. The mode of interaction, as proved by Fourier Transform Infrared Spectroscopy (FTIR), was multiple H‐bonding between the tertiary amino group of the monomer and the carboxylic groups of the polymer. The hydrogels represented suitable matrices for enzyme immobilization. The effect of varying the polymer–monomer molar ratio on the swelling kinetics and parameters was investigated. The dynamic swelling isotherm exhibited a Fickian mode of penetrant sorption and a plateau that increases with the amino group content. A polymer complex of molar ratio (polymer:monomer) 0.5:0.8 had a weight swelling ratio of 10 and 7 at pHs 3 and 8, respectively. The proven pH sensitivity together with the amphoteric character of these hydrogels make them good candidates for another bioapplication such as oral delivery systems of therapeutic peptides and proteins. The structural integrity of the hydrogels was proved by their swelling reversibility. β‐Galactosidase, as an acidic model enzyme, was immobilized covalently on the synthesized hydrogels. The maximum enzyme velocity (V_max) was enhanced to 19 µmol/min/mg, for polycomplex of molar ratio 0.5:0.8, compared with 3.2 µmol/min/mg for the free enzyme. Copyright © 2008 John Wiley & Sons, Ltd.     

Polymerization of novel trifluorovinyl ethers: Insight into the mechanisms of termination and chain transfer

New trifluorovinyl ether polymers were synthesized with the view toward overcoming the high chemical and thermal stabilities commonly associated with fluoropolymers. Trifluorovinyl ether copolymers, with fluorinated pendant groups, have previously been prepared to overcome limitations in processibility. To further enhance solubility in common organic solvents and to improve processibility, we prepared three new trifluorovinyl ether monomers, having hydrocarbon ether pendant groups, for polymerization: 1-[2-(2-ethoxy ethoxy)ethoxy]-1,2,2-trifluoroethene (Et-TFVE), 1-[2-(2-t-butoxy ethoxy)ethoxy]-1,2,2-trifluoroethene (t-Bu-TFVE), and 1-(2-phenoxy ethoxy)-1,2,2-trifluoroethene (Ph-TFVE). Homopolymers of these three monomers were prepared by aqueous emulsion polymerization with the use of a redox initiator. Poly(Et-TFVE) and poly(Ph-TFVE) were prepared with a range of molar masses, the highest of which had weight average molar masses of 33,800 g mol⁻¹ and 59,000 g mol⁻¹, respectively. As a result of monomer reactivity and structure, the polymerization mechanism was complicated, resulting in β-scission termination/chain transfer for all three polymers and hydrogen abstraction chain transfer for poly(Et-TFVE) and poly(t-Bu-TFVE). To the best of our knowledge, this is the first example of hydrogen abstraction from the pendant group of the trifluorovinyl ether itself. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3301–3308, 1999     

Chloro(η6‐p‐cymene)(phosphoramidite)ruthenium(II), a 16‐Electron Fragment Stabilized by an η2‐Aryl–Metal Interaction,and Its Use in Asymmetric Cyclopropanation

Chloride abstraction from the half‐sandwich complexes [RuCl₂(η⁶‐p‐cymene)(P*‐κP)] ( 2a : P* = (S_a,R,R)‐ 1a = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐1‐phenylethyl)]phosphoramidite; 2b : P* = (S_a,R,R)‐ 1b = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐(1‐(1‐naphthalen‐1‐yl)ethyl]phosphoramidite) with (Et₃O)[PF₆] or Tl[PF₆] gives the cationic, 18‐electron complexes dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐phenyl]ethyl}[(1R)‐1‐phenylethyl]phosphoramidite‐κP}ruthenium(II) hexafluorophosphate ( 3a ) and [Ru(S)]‐dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐naphthalen‐1‐yl]ethyl}[(1R)‐1‐(naphthalen‐1‐yl)ethyl]phosphoramidite‐κP)ruthenium(II) hexafluorophosphate ( 3b ), which feature the η²‐coordination of one aryl substituent of the phosphoramidite ligand, as indicated by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy and confirmed by an X‐ray study of 3b . Additionally, the dissociation of p‐cymene from 2a and 3a gives dichloro{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐(1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP)ruthenium(II) ( 4a ) and di‐μ‐chlorobis{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP}diruthenium(II) bis(hexafluorophosphate) ( 5a ), respectively, in which one phenyl group of the N‐substituents is η⁶‐coordinated to the Ru‐center. Complexes 3a and 3b catalyze the asymmetric cyclopropanation of α‐methylstyrene with ethyl diazoacetate with up to 86 and 87% ee for the cis‐ and the trans‐isomers, respectively.     

Preparation of Al(OH)3/PMMA nanocomposites by emulsion polymerization

Al(OH)₃/PMMA nanocomposites were prepared by the emulsion polymerization of methyl methacrylate (MMA) in the presence of surface‐functionalized Al(OH)₃ particles. Nanosized Al(OH)₃ particles were previously functionalized with a silane coupling agent, 3‐(trimethoxysilyl) propyl methacrylate (γ‐MPS), which was confirmed by FT‐IR and XRF analysis. The average size of seed particles was around 70 nm, and the density of the coupling agent on the particles was calculated to be 8.9 µmol m^?2. The emulsion polymerization was attempted at relatively high solid content of 40–46 wt%. The ratio of the seed particles to MMA had a strong influence on the stability of latex as well as the morphology of composites. Nanocomposites where several PMMA nodules were attached on the surface of Al(OH)₃ core were produced with stable latex emulsion when the weight percents of Al(OH)₃ to MMA were below 20. In the case of higher ratio of 30%, however, the latexes became unstable with an aggregation, and the product morphology was in the shape of large composite. Thermogravimetric analysis showed an improved thermal stability of PMMA composites with the incorporation of Al(OH)₃ nanoparticles. Copyright © 2008 John Wiley & Sons, Ltd.     

Efficient zinc initiators supported by NNO‐tridentate ketiminate ligands for cyclic esters polymerization

A series of zinc benzylalkoxide complexes, [LⁿZn(μ‐OBn)]₂ (L = L ¹ H – L ⁵ H ), supported by NNO‐tridentate ketiminate ligands with various electron withdrawing‐donating subsituents have been synthesized and characterized. X‐ray crystal structural studies revealed that complexes 2b and 4b are dinuclear bridging through the benzylalkoxy oxygen atoms with penta‐coordinated metal centers. All the metal complexes have acted as efficient initiators for the ring‐opening polymerization of L ‐lactide (within 12 min, 0 °C). Remarkably, a molecular weight of PLLA up to 580,000 can be achieved using [(L⁵Zn(μ‐OBn)]₂ ( 5b ) as an initiator. The kinetic studies for the polymerization of L ‐lactide with complex 3b at ?10 °C corresponded to first‐order reactions in the monomer. The ring‐opening polymerization (ROP) of ε‐caprolactone, ε‐decalactone, β‐butyrolactone and their copolymer with complex 3b was investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Lithiated Primary Amine—A New Material for Hydrogen Storage

A facile method for synthesizing crystalline lithiated amines by ball milling primary amines with LiH was developed. The lithiated amines exhibit an unprecedented endothermic dehydrogenation feature in the temperature range of 150–250 °C, which shows potential as a new type of hydrogen storage material. Structural analysis and mechanistic studies on lithiated ethylenediamine (Li₂EDA) indicates that Li may mediate the dehydrogenation through an α,β‐LiH elimination mechanism, creating a more energy favorable pathway for the selective H₂ release.