The First Dinuclear Nickel(II) Thiosulfate Obtained From Oxidation of Tri‐tert‐butoxysilanethiol. Contributions to the Chemistry of Silicon‐Sulfur Compounds No. 78[1]

The title complex, neutral {[Ni₂(μ‐S₂O₃)₂(C₇H₉N)₄H₂O]C₇H₈} ( 1 ), presents a dinuclear structure with the thiosulfate group acting as a (S, O) chelate and simultaneously as a (S) bridge. The molecular structure was determined by X‐ray crystallography. Complex 1 crystallizes as a hydrogen‐bonded dimer with molecule of toluene solvent in the unit cell. The environment of both central nickel atoms is octahedral with NiN₂O₂S₂ cores. This is the first metal thiosulfate complex isolated as a product of the oxidation of silanethiol. A mechanism of the reaction involving the formation of (RO)₃SiSSSi(OR)₃ intermediate is proposed with the subsequent cleavage of Si–S bond.     

Die Kristallstrukturen der Cyanidofluoridoborate K[BFx(CN)4–x], x = 0–4

The crystal structure of K[BF₃(CN)] (Pbcn (Nr. 60) with a = 13.3486(15) b = 6.5239(7) c = 10.0085(11) Å, and eight formula units per unit cell) has been determined and the one of K[BF₂(CN)₂] was confirmed and improved. The different networks in the complete series of borates K[BF_x(CN)_4–x], x = 0–4 are compared and discussed.     

Pd(II) complexes of N(4)‐substituted phenylaminoacetohydrazone and biacetylmonooxime: synthesis,characterization, structures and catalytic behaviour towards Suzuki–Miyaura coupling reactions

The reaction of [PdCl₂(CH₃CN)₂] and N(4)‐substituted phenylaminoacetohydrazone ligands (LH) in methanol at room temperature afforded air‐ and moisture‐stable palladium(II) complexes of two types with general formulae [Pd(LH)Cl] and [Pd₂(LH)(L)]Cl. An unusual coordination mode of ligand LH is observed, in which the ligand coordinates through N(4)H nitrogen and without enolization of the carbonyl group of the hydrazone moiety in both mono‐ and bimetallic complexes. The crystal structure of the complexes reveals that the oxime LH reacts with [PdCl₂(CH₃CN)₂] presumably via the elimination of HCl from hydrazine NH. All the synthesized Pd(II) complexes were evaluated as catalysts in the Suzuki cross‐coupling reaction of aryl halides, activated 4‐bromoacetophenone and non‐activated bromobenzene, with phenylboronic acid in aqueous medium. In both cases, i.e. with activated and non‐activated aryl halides, all the complexes show moderate conversion leading to biaryls with yields in the range 50–65%. Copyright © 2016 John Wiley & Sons, Ltd.     

[μ‐(Me3SiCH2Sb)5–Sb1,Sb3–{W(CO)5}2] und [{(Me3Si)2CHSb}3Fe(CO)4] – zwei cyclische Komplexe mit Antimon‐Liganden

Syntheses and Crystal Structures of [μ‐(Me₃SiCH₂Sb)₅–Sb¹,Sb³–{W(CO)₅}₂] and [{(Me₃Si)₂CHSb}₃Fe(CO)₄] – Two Cyclic Complexes with Antimony Ligands cyclo‐(Me₃SiCH₂Sb)₅ reacts with [(THF)W(CO)₅] (THF = tetrahydrofuran) to form cyclo‐[μ‐(Me₃SiCH₂Sb)₅–Sb¹,Sb³–{W(CO)₅}₂] ( 1 ). The heterocycle cyclo‐ [{(Me₃Si)₂CHSb}₃Fe(CO)₄] ( 2 ) is formed by an insertion reaction of cyclo‐[(Me₃Si)₂CHSb]₃ and [Fe₂(CO)₉]. The crystal structures of 1 and 2 are reported.     

Synthesis and Characterization of Copper(I) Complexes Containing Tri(2‐Pyridylmethyl)Amine Ligand

Reaction of copper halides CuX (X=Cl, Br, I) with tri(2‐pyridylmethyl)amine) (TPMA) in THF under N₂ affords a series of monomeric copper(I) complexes CuX(TPMA) (X=Cl ( 1 ), Br ( 2 ) and I ( 3 )). Treatment of [CuCl(TPMA)] ( 1 ) with 0.5 equivalent of 1,4‐diisocyanobenzene following by equimolar amount of NaBF₄ affords a novel binuclear complex [(TPMA)Cu(μ‐1,4‐CNC₆H₄NC)Cu(TPMA)](BF₄)₂ ( 4 ). The copper(I) halide TPMA complexes show interesting fluxional behaviors in temperature dependence in the ¹H NMR spectrum that can be explained by the dissociation and reassociation of the pyridyl group and alkylamine nitrogen of TPMA ligand. The crystal structures of 1 , 3 and 4 are determined by an X‐ray diffractometer. Complexes 1 and 3 are distorted tetrahedral coordinates with strong bonding between three pyridyl N atoms and the corresponding halide donor. Crystallographic results of 4 clearly indicates two Cu(I) ions are bridged by 1,4‐diisocyanobenzene, forming a centro‐symmetrical homobinuclear complex with a “dangling” uncoordinated pyridyl group.     

Crystallographic report: Diisopropylammonium [3‐(2‐thienyl)‐2‐sulfanylpropenoato]triphenylstannate

The title compound comprises trigonal bipyramidal SnPh₃(tspa) anions and ⁱPr₂NH₂ cations linked into centrosymmetric dimers by N? H·O hydrogen bonds. Copyright © 2004 John Wiley & Sons, Ltd.     

Opening a New Series of Calcium Boridecarbides with Heterographene Nets by Ca1–x(B,C)6 and Ca1–x(B,C)8 – Two Members of the (CaB2)Cn Compound Series

Ca_1–xB₂C₄ (x ~ 0.08) and Ca_1–xB₂C₆ (x ~ 0.04) are two compounds containing heterographene‐B,C nets which were prepared by solid state synthesis and structurally characterized by X‐ray powder diffraction data. Both compounds crystallize in the space group P6/ mmm (No. 191). The lattice constants are a = 4.55971(5) Å and c = 4.4020(1) Å for CaB₂C₄ and a = 2.58390(5) Å, c = 4.43597(8) Å for CaB₂C₆. The calcium atoms are intercalated between the heterographene (B,C) nets. The calcium atom distribution in Ca_1–xB₂C₆ is disordered, leading to diffuse scattering. A model for this disorder was developed that matches well the observed diffuse scattering observed in the electron diffraction pattern. For Ca_1–xB₂C₆ and its decomposition products magnetic and electric properties are being reported.     

Protonated Melonate Ca[HC6N7(NCN)3]·7H2O – Synthesis,Crystal Structure,and Thermal Properties

Calcium hydrogenmelonate heptahydrate Ca[HC₆N₇(NCN)₃] · 7H₂O was obtained by metathesis reaction in aqueous solution. The structure of the molecular salt was elucidated by single‐crystal X‐ray diffraction. The crystal structure consists of alternating layers of planar monopronated melonate ions, Ca²⁺ and crystal water molecules. The anions of adjacent layers are staggered so that no π–π stacking occurs. The melonate entities are interconnected by hydrogen bonds within and between the layers. Ca[HC₆N₇(NCN)₃] · 7H₂O was investigated by solid‐state NMR and FTIR spectroscopy, TG and DTA measurements.     

New Phases in the Lithiumnitridovanadate System — The Solid Solution Li7‐2xMgx[VN4] with 0 ≤ x ≤ 1

Solid solution phases Li_7‐2xMg_x[VN₄] (0 < x ≤ 1) with varying Mg‐content are obtained as yellow microcrystalline powders from heat treatment of mixtures of VN, Li₃N and Mg₃N₂ or from mixtures of Li₇[VN₄] and Mg₃N₂ at 1370 K in N₂ atmosphere at ambient pressure. At substitution parameter values of x > 0.5 a subsequent distortion from the ideal cubic unit cell to an orthorhombic unit cell is observed. The crystal structure of Li_7‐2xMg_x[VN₄] with x ≈ 1 was refined from neutron and X‐ray powder diffraction data (space group Pbca, No. 61, a = 963.03(3) pm, b = 958.44(3) pm, c = 951.93(2) pm, neutron pattern 14° — 156° 2θ, step non‐linear ≈ 0.0782° 2θ, No. of measured points 1816, R_p = 0.089, R_wp = 0.115, R_Bragg = 0.155, R_F = 0.114; X‐ray pattern 10° — 98° 2θ, step 0.005° 2θ, No. of measured points 17600, R_p = 0.028, R_wp = 0.045, R_Bragg = 0.113, R_F = 0.133, structure variables: 45). The crystal structure resembles a Li₂O type superstructure with the atomic arrangement of β‐Li₇[VN₄] and with two crystallographic Li‐sites each substituted by Mg with statistical occupation factors of 0.5. Chemical analyses prove the composition and XAS spectroscopy at the V K‐edge support the +5 oxidation state assignment for vanadium. XAS data also support the tetrahedral coordination of vanadium by N as indicated by the structure refinements.     

Isolatable Organophosphorus(III)–Tellurium Heterocycles

A new structural arrangement Te₃(RP^III)₃ and the first crystal structures of organophosphorus(III)–tellurium heterocycles are presented. The heterocycles can be stabilized and structurally characterized by the appropriate choice of substituents in Te_m(P^IIIR)_n (m=1: n=2, R=OMes* (Mes*=supermesityl or 2,4,6‐tri‐tert‐butylphenyl); n=3, R=adamantyl (Ad); n=4, R=ferrocene (Fc); m=n=3: R=trityl (Trt), Mesor by the installation of a P^V₂N₂ anchor in RP^III[TeP^V(tBuN)(μ‐NtBu)]₂ (R=Ad, tBu).     

Eine alternative Synthese des Oligoalumosiloxans [Ph2SiO]8[Al(O)OH]4 und seiner Alkohol‐Addukte

The oligoalumosiloxanes {[Ph₂SiO]₈[Al(O)OH]₄·2,5Et₂O·HOtBu} ( 6 ) and {[Ph₂SiO]₈[Al(O)OH]₄·2Et₂O·2HOiPr} ( 7 ) have been obtained from the reaction of diphenylsilanediol with aluminium‐tri‐tert‐butoxide and aluminium‐tri‐iso‐propoxide in ethyl ether with reasonable yields. In a 1:1 molar mixture of toluene and the respective alcohol (iso‐propanol or tert‐butanol), the ethyl ether molecules in {[Ph₂SiO]₈[Al(O)OH]₄·4Et₂O}, in 6 or 7 can be completely displaced forming the compounds [Ph₂SiO]₈[Al(O)OH]₄·4HOiPr ( 8 ) and [Ph₂SiO]₈[Al(O)OH]₄·nHOtBu ( 9 ). Whereas 6 , 7 and 8 are crystalline, 9 is obtained as a viscous liquid. An X‐ray structure determination on {[Ph₂SiO]₈[Al(O)OH]₄·3Et₂O·HOtBu} reveals different bonding modes of the diethyl ether molecules to the oligoalumosiloxane compared to the tert‐butanol, which forms two hydrogen bonds (one to the OH‐group of the inner Al₄(OH)₄ cycle and one through the alcohol OH‐group to a Si–O–Al moiety. The alcohol adducts have been characterized in solution through ¹H‐, ¹³C‐ and ²⁹Si‐NMR and show dynamic equilibria between the oligoalumosiloxane [Ph₂SiO]₈[Al(O)OH]₄ and the alcohol molecules.     

Preparation and structures of [2‐(dimethylamino)phenyl]diorganotin(IV) acetates substituted with organophosphorus groups in the α‐position of the acetate ligand

Organotin(IV) carboxylates R₂L^NCSnOC(O)CH₂P(E)Ph₂, where L^NC is an N‐chelating 2‐(dimethylamino)phenyl group, and R/E = Ph/void (1a), Ph/O (1b), Ph/S (1c), Me/void (2a), Me/O (2b) and Me/S (2c), were synthesized, characterized by ¹H, ¹³C, ³¹P and ¹¹⁹Sn NMR, IR and MS spectra, and the solid‐state structures of 1b, 1c, 2b and 2c were determined by single‐crystal X‐ray diffraction. Spectral and structural data showed that the compounds are monomeric in CDCl₃ solution and the solid state, with the organophosphorus groups in the α‐position of the monodentate carboxylate ligands not interacting with the tin atom. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and Characterization of the First Doubly‐bridged N,N‐dimethylthiocarbamoyl Metal Complex: Crystal Structure of [Mo(Cl)(CO)2(PPh3)]2(η1:η2:μ‐SCNMe2)2

The first doubly‐bridged thiocarbamoyl metal complex [Mo(Cl)(CO)₂(PPh₃)]₂(η¹:η²:μ‐SCNMe₂)₂ ( 2 ) was formed from stirring [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] ( 1 ) in dichloromethane at room temperature. Complex 2 is a dimer with each thiocarbamoyl unit coordinating through sulfur and carbon to one metal center and bridging both metals through sulfur. Complex 2 is characterized by X‐ray diffraction analysis.     

Si44– in Solution – First Solvate Crystal Structure of the Ligand‐free Tetrasilicide Tetraanion in Rb1.2K2.8Si4·7NH3

We report the first solvate structure of the silicide anion Si₄^4–, which provides circumstantial evidence of the stability of the highly charged anion in liquid ammonia solutions. The solvate Rb_1.2K_2.8Si₄ · 7NH₃ crystallized from a mixture of the ternary compound K₆Rb₆Si₁₇ with the transition metal complex [(C₆H₅)₃P]₂Ni(CO)₂ [bis(triphenylphosphine)dicarbonylnickel] in the presence of the chelating agents 18‐crown‐6 (1,4,7,10,13,16‐hexaoxacyclooctadecane) and [2.2.2]cryptand (4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) in liquid ammonia. Single X‐ray diffraction analysis confirms the presence of the Si₄^4– anion in the crystal structure of Rb_1.2K_2.8Si₄ · 7NH₃, which represents the first solvate compound of the naked tetrasilicide tetraanion. All five crystallographically independent cation positions show mixed occupancy by Rb⁺ and K⁺.     

The Synthesis and Structure of Hexakis(dimethylphenylphosphonite)ruthenium(II) bis[tetraphenylborate(–1)]

Abstract . Treatment of the hydrazine salt [Ru(COD)(H₂NNH₂)₄][BPh₄]₂ with excess of P(OMe)₂Ph in acetone gave a homoleptic complex trans‐[Ru{P(OMe)₂Ph}₆][BPh₄]₂, which was characterized by IR, ³¹P{¹H}, ¹³C{¹H}, and ¹H NMR spectroscopy, elemental analysis, and X‐ray crystallography. The ruthenium in the complex has distorted octahedral coordination arrangement and bonded to all the six P(OMe)₂Ph molecules through the phosphorus atoms.     

Synthesis,Reactivity and Crystal Structures of the Palladium(II) Complexes with the Pyrimidine Containing Ligand: Crystal Structures of [Pd(PPh3)(η1‐C4H3N2)(η2‐S2CNC4H8)] and [Pd(PPh3)(η1‐C4H3N2)(η2‐Tp)]

Treatment of Pd(PPh₃)₄ with 5‐bromo‐pyrimidine [C₄H₃N₂Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃)₂(η¹‐C₄H₃N₂)(Br)], 1 , by substituting two triphenylphosphine ligands. In acetonitrile solution of 1 in refluxing temperature for 1 day, it do not undergo displacement of the triphenylphosphine ligand to form the dipalladium complex [Pd(PPh₃)Br]₂{μ,η²‐(η¹‐C₄H₃N₂)}₂, or bromide ligand to form chelating pyrimidine complex [Pd(PPh₃)₂(η²‐C₄H₃N₂)]Br. Complex 1 reacted with bidentate ligand, NH₄S₂CNC₄H₈, and tridentate ligand, KTp {Tp = tris(pyrazoyl‐1‐yl)borate}, to obtain the η²‐dithiocarbamate η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐S₂CNC₄H₈)], 4 and η²‐Tp η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐Tp)], 5 , respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

Morphology and crystal structure of the poly(ethylene oxide)–hydroquinone molecular complex

The occurrence of a molecular complex between poly(ethylene oxide) (PEO) and p‐dihydroxybenzene (hydroquinone) has been determined using different experimental techniques such as differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD), and Fourier transform infrared spectroscopy (FTIR). From DSC investigations, an ethylene oxide/hydroquinone molar ratio of 2/1 was deduced. During the heating, the molecular complex undergoes a peritectic reaction and spontaneously transforms into a liquid phase and crystalline hydroquinone (incongruent melting). A triclinic unit cell (a = 1.17 nm, b = 1.20 nm, c = 1.06 nm, α = 78°, β = 64°, γ = 115°), containing eight ethylene oxide (EO) monomers and four hydroquinone molecules, has been determined from the analysis of the X‐ray diffraction fiber patterns of stretched and spherulitic films. The PEO chains adopt a helical conformation with four monomers per turn, which is very similar to the 7₂ helix of the pure polymer. A crystal structure is proposed on the basis of molecular packing considerations and X‐ray diffraction intensities. It consists of a layered structure with an alternation of PEO and small molecules layers, both layers being stabilized by an array of hydrogen bonds. The morphology of PEO–HYD crystals was studied by small angle X‐ray scattering and DSC. As previously shown for the PEO–resorcinol complex, PEO–HYD samples crystallize with a lamellar thickness corresponding to fully extended or integral folded chains. The relative proportion of lamellae with different thicknesses depends on the crystallization temperature and time. Finally, the observed morphologies are discussed in terms of intermolecular interactions and chain mobility. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1197–1208, 1999     

Ammonolysis of 1,2‐Bis[dichloro(methyl)silyl]ethane. On the Structure of 1,3,6,8‐Tetramethyl‐2,7,11,12‐tetraaza‐1,3,6,8‐tetrasila‐tricyclo[6.2.1.13,6]‐dodecane

Ammonolysis of 1,2‐bis[dichloro(methyl)silyl]ethane afforded a crystalline tricyclic silazane along with polymeric material. The crystalline material could be isolated in pure state. It was analyzed by ¹H, ¹³C, ¹⁵N and ²⁹Si NMR spectroscopy in solution, by ¹³C, ¹⁵N and ²⁹Si MAS NMR spectroscopy in the solid state, as well as by single‐crystal and powder X‐ray diffraction. The title compound exists as a single isomer in solution, whereas in the solid state the presence of several modifications is indicated, in particular by the solid‐state MAS NMR spectra.     

The Protonation of Acetamide and Thioacetamide in Super­acidic Solutions: Crystal Structures of [H3CC(OH)NH2]+AsF6– and [H3CC(SH)NH2]+AsF6–

Acetamide and thioacetamide react with the superacid solutions HF/MF₅ (M = As, Sb) under formation of the corresponding salts [H₃CC(OH)NH₂]⁺MF₆^– and [H₃CC(SH)NH₂]⁺MF₆^– (M = As, Sb), respectively. The reaction of DF/AsF₅ with acetamide and thioacetamide lead to the corresponding deuterated salts [H₃CC(OD)ND₂]⁺AsF₆^– and [H₃CC(SD)ND₂]⁺AsF₆^–, respectively_. The salts are characterized by vibrational and NMR spectroscopy, and in the case of [H₃CC(OH)NH₂]⁺AsF₆^– and [H₃CC(SH)NH₂]⁺AsF₆^– also by single‐crystal X‐ray analyses. The [H₃CC(OH)NH₂]⁺AsF₆^– ( 1 ) salt crystallizes in the triclinic space group P$\bar{1}$ with two formula units per unit cell, and the [H₃CC(SH)NH₂]⁺AsF₆^– ( 2 ) salt crystallizes in the monoclinic space group P2₁/c with four formula units per unit cell. In both crystal structures three‐dimensional networks are observed which are formed by intra‐ and intermolecular N–H ··· F and O–H ··· F or S–H ··· F hydrogen bonds, respectively. For the vibrational analyses, quantum chemically calculated spectra of the cations [H₃CC(OH)NH₂ · 3HF]⁺ and [H₃CC(SH)NH₂ · 2HF]⁺ are considered.