Semicontinuous heterophase polymerization under monomer starved conditions to prepare nanoparticles with narrow size distribution

The semicontinuous polymerization of methyl methacrylate (MMA) in heterogeneous medium under monomer‐starved conditions is reported here. The effect of monomer addition rate on kinetics, particle size, particle number, and PMMA average molar masses are reported. This process permits the synthesis of high‐solid content latexes containing nano‐sized particles (<40 nm) with narrow particle size distributions [(D_w/D_n) < 1.1]. Moreover, the molar masses (M_n ≈ 0.3–1.2 × 10⁶ g/mol) are much lower than those expected by chain transfer to monomer, which is the typical termination mechanism in 0–1 emulsion and microemulsion reactions. Both particle size and average molar masses decrease as the rate of monomer addition is diminished. Possible explanations for this process are provided. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1463–1473, 2007     

Cobalt‐mediated radical polymerization routes to poly(vinyl ester) block copolymers

Cobalt‐mediated radical polymerizations (CMRPs) utilizing redox initiation are demonstrated to produce poly(vinyl ester) homopolymers derived from vinyl pivalate (VPv) and vinyl benzoate (VBz), and their block copolymers with vinyl acetate (VAc). Combining anhydrous Co(acac)₂, lauroyl peroxide, citric acid trisodium salt, and VPv at 30 °C results in controlled polymerizations that yield homopolymers with M_n = 2.5–27 kg/mol with M_w/M_n = 1.20–1.30. Homopolymerizations of scrupulously purified VBz proceed with lower levels of control as evidenced by broader polydispersities over a range of molecular weights (M_n = 4–16 kg/mol; M_w/M_n = 1.34–1.65), which may be interpreted in terms of the decreased nucleophilicity of these less electron donating propagating polymer chain ends. Based on these results, we demonstrate that sequential CMRP reactions present a viable route to microphase separated poly(vinyl ester) block copolymers as shown by small‐angle X‐ray scattering analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Atom transfer radical copolymerization of n‐hexylmaleimide and styrene in an ionic liquid

Dendritic polyarylether 2‐bromoisobutyrates of different generations (Gn‐Br, n = 1–3) as macroinitiators for the atom transfer radical copolymerization of N‐hexylmaleimide and styrene in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate, were investigated. The copolymerization carried out in the ionic liquid with CuBr/pentamethyldiethylenetriamine as a catalyst at room temperature afforded polymers with well‐defined molecular weights and low polydispersities (1.18 < M_w/M_n < 1.36, where M_w is the weight‐average molecular weight and M_n is the number‐average molecular weight), and the resultant copolymers possessed an alternating structure over a wide range of monomer feeds (f₁ = 0.3–0.8). Meanwhile, the copolymerization was also conducted in anisole at 110 °C under similar conditions so that the effect of the reaction media on the polymerization could be evaluated. The monomer reactivity ratios showed that the tendency to form alternating copolymers for the two monomers was stronger in ionic liquids than in anisole. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3360–3366, 2002     

Reversible addition–fragmentation chain transfer/miniemulsion polymerization of butyl methacrylate in the presence of β‐cyclodextrin

In the presence of β‐cyclodextrin (β‐CD), reversible addition–fragmentation chain transfer (RAFT) polymerization has been successfully applied to control the molecular weight and polydispersity [weight‐average molecular weight/number‐average molecular weight (M_w/M_n)] in the miniemulsion polymerization of butyl methacrylate, with 2‐cyanoprop‐2‐yl dithiobenzoate as a chain‐transfer agent (or RAFT agent) and 2,2′‐azoisobutyronitrile (AIBN) as an initiator. β‐CD acted as both a stabilizer and a solubilizer, assisting the transportation of the water‐insoluble, low‐molecular‐weight RAFT agent into the polymerization loca (i.e., droplets or latex particles) and thereby ensuring that the RAFT agent was homogeneous in the polymerization loca. The polymers produced in the system of β‐CD exhibited narrower polydispersity (1.2 < M_w/M_n < 1.3) than those without β‐CD. Moreover, the number‐average molecular weight in the former case could be controlled by a definite amount of the RAFT agent. Significantly, β‐CD was proved to have a favorable effect on the stability of polymer latex, and no coagulum was observed. The effects of the concentrations of the RAFT agent and AIBN on the conversion, the molecular weight and its distribution, and the particle size of latices were investigated in detail. Furthermore, the influences of the variations of the surfactant (sodium dodecyl sulfate) and costabilizer (hexadecane) on the RAFT/miniemulsion polymerization were also studied. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2931–2940, 2005     

Synthesis of polycarbosilanes by A2 + Bn (n = 2, 3, and 4) type hydrosilylation reaction and evaluation of their refractive index properties

Polycarbosilanes were synthesized by hydrosilylation reaction of A₂ monomer containing bis Si? H moieties and B_n (n = 2, 3, and 4) monomers containing di‐, tri‐, and tetra‐vinyl groups in the presence of Karstedt's catalyst. The corresponding linear polycarbosilanes (LPC) and hyperbranched polycarbosilanes (HBPC) having M_n 2200–51,500 were obtained in 34–94% yield, without any gel product. The values of refractive index (n_D) of the synthesized LPC and HBPC were in the range from 1.460 to 1.711, and were consistent with the structures of the synthesized products. In the case of HBPC, the values of n_D increased with increase of number‐average molecular weight (M_n), molecular weight distribution (M_w/M_n), and glass transition temperature (T_g), apparently because of increased density due to the presence of microgels, that is, high refractive index hyperbranched carbosilanes could be synthesized by A₂ + B_n (n = 3 and 4) method. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Preparation of nanoparticles of double‐hydrophilic PEO‐PHEMA block copolymers by AGET ATRP in inverse miniemulsion

Atom transfer radical polymerization with activators generated by electron transfer initiating/catalytic system (AGET ATRP) of 2‐hydroxyethyl methacrylate (HEMA) was carried out in inverse miniemulsion. Water‐soluble ascorbic acid as a reducing agent and mono‐ and difunctional poly(ethylene oxide)‐based bromoisobutyrate (PEO‐Br) as a macroinitiator were used in the presence of CuBr₂/tris[(2‐pyridyl)methyl]amine (TPMA) and CuCl₂/TPMA complexes. The use of poly(ethylene‐co‐butylene)‐block‐poly(ethylene oxide) as a polymer surfactant resulted in the formation of stable HEMA cyclohexane inverse dispersion and PHEMA colloidal particles. All polymerizations were well‐controlled, allowing for the preparation of well‐defined PEO‐PHEMA and PHEMA‐PEO‐PHEMA block copolymers with relatively high molecular weight (DP > 200) and narrow molecular weight distribution (M_w/M_n < 1.3). These block copolymers self‐assembled to form micellar nanoparticles being 10–20 nm in diameter with uniform size distribution, and aggregation number of ～10 confirmed by atomic force microscopy and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4764–4772, 2007     

Synthesis of dual pH/temperature‐responsive polymers with amino groups by living cationic polymerization

For the precision synthesis of primary amino functional polymers, cationic polymerization of a phthalimide‐containing vinyl ether monomer precursor, 2‐vinyloxyethyl phthalimide (PIVE), was examined using a base‐assisting initiating system. Living polymerization of PIVE in CH₂Cl₂ in the presence of 1,4‐dioxane as an added base yielded nearly monodispersed polymers (M_w/M_n < 1.1) and higher molecular weight polymers, which have never been obtained using other initiating systems. Furthermore, block copolymers with hydrophobic or hydrophilic groups could be prepared. The deprotection of the pendant phthalimide groups gave well‐defined pH‐responsive polymers with pendant primary amino groups. Dual‐stimuli–responsive block copolymers having a pH‐responsive polyamine segment and a thermosensitive segment self‐assembled in water in response to both pH and temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1207–1213, 2010     

Influence of Perfluorinated End Groups on the SFRD of [Pt(cod)Me(CnF2n+1)] onto Porous Al2O3 in CO2 under Reductive Conditions

The optimized synthesis of a range of cyclooctadiene‐stabilized Pt complexes that contained different perfluoro‐alkane chains, [Pt(cod)Me(C_nF_2n+1)], is presented. These metal–organic compounds were employed in the so‐called supercritical fluid reactive deposition (SFRD) in CO₂ under reductive conditions to generate metallic nanoparticles on aluminum oxide as a porous support. Thus, Al₂O₃‐supported Pt nanoparticles with a narrow particle‐size distribution were obtained. At a reduction pressure of 15.5 MPa and a temperature of 353 K, particle diameters of d₅₀=2.3–2.8 nm were generated. Decreasing the pressure during the reduction reaction led to slightly larger particles whilst decreasing the amount of organometallic precursor in CO₂ yielded a decrease in the particle size from x₅₀=3.2 nm to 2.6 nm and a particle‐size distribution of 2.2 nm. Furthermore, substitution of the CH₃ end group by the C_nF_2n+1 end groups led to a significant drop in Pt loading of about 50 %. Within the series of perfluorinated end groups that were considered, the Pt complex that contained a branched perfluoro‐isopropyl group showed the most‐interesting results when compared to the control precursor, [Pt(cod)Me₂] ( 1 ).     

Novel catalyst system of MCl2/FeCl3·6H2O/PPh3 (M = Ni,Co, or Mn) for the atom transfer radical polymerization of methyl methacrylate

MCl₂ (M = Ni, Co, Sn, or Mn) and PPh₃ together acted as a catalyst for the radical polymerization of methyl methacrylate (MMA) in the presence of ethyl 2‐bromoisobutyrate as an initiator. The four systems all led to conventional radical polymerizations, which yielded polymers with a weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ratio greater than 2.0 and became well controlled when a certain amount of FeCl₃·6H₂O was added. The polymerizations of MMA catalyzed by these four FeCl₃‐modified catalyst systems provided well‐defined polymers with low polydispersities (M_w/M_n < 1.28). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2625–2631, 2005     

A polymer–solvent system with two homogeneous double critical points: Polystyrene (PS)/(n-heptane + methylcyclohexane)

Liquid–liquid (LL) critical demixing loci have been experimentally determined in the (T,P) projection for some polystyrene/solvent systems with nonspecific interaction for (∼ 270 K < T < ∼ 500 K) and (0 MPa < P < 200 MPa). A lower homogeneous double critical pressure and lower homogeneous double critical temperature have been located for a solution of PS (M_w = 2.0 × 10⁶) dissolved in an n-heptane/methylcyclohexane mixture [PS/n-C₇H₁₆/CH₃C₆H₁₁//0.029/0.194/0.777 (wt. fractions)]. That solution forms the first example of a polymer/solvent with nonspecific interaction that exhibits two double critical points. A symmetrical representation of the LL critical loci in the (P,T) plane is developed. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2747–2753, 1999     

Synthesis of polypyrrole nanoparticles by oil-in-water microemulsion polymerization with narrow size distribution

Conductive spherical polypyrrole nanoparticles were obtained by polymerization in oil-in-water (o/w) microemulsions using sodium dodecyl sulfate (SDS) as anionic surfactant, ethanol as co-surfactant, and potassium persulfate (KPS, 0.017 wt.%) as oxidizing agent. The average particle diameter (Dp) of the nanoparticles was between 38 and 45 nm with narrow particle size distributions (D _w/D _n < 1.2). Dp increases with the ethanol concentration due to the intercalation between the polar heads of SDS, promoting instability of the nanoparticles and some coagulation. In this work, low surfactant concentration was used, and the molar ratio of the oxidizing agent to monomer was 8.5 × 10⁻³, a value much lower compared with others reported in the literature. Increasing the ethanol concentration in the recipes enhanced the conductive properties of the polymers due to the high π-conjugation length obtained.     

Influence of the particle size of the MgCl2 support on the performance of Ziegler catalysts in the polymerization of ethylene to ultra‐high molecular weight polyethylene and the resulting polymer properties

A highly systematic size series of Ziegler catalysts with similar porosities and surface textures are synthesized by varying the stirring speed during the MgCl₂ support synthesis. Besides the mean particle size, the only substantial difference observed between the various catalysts is the size and number of nodules per particle. Varying the mean diameter of the catalyst particles between 1.5 and 11.9 µm, leads to a pronounced impact on the activity in ultra‐high molecular weight polyethylene (UHMWPE) polymerization, while the M_w capabilities are only affected to a limited extend. In addition, it is observed that both the M_ws as the polymer bulk density (BD) increases during the course of the polymerization. This particularity allows to optimize the M_w and/or BD at a set polymer size, by tuning the catalyst particle size. This is particularly interesting in UHMWPE production, as control of the morphological and structural properties of the UHMWPE reactor powders are critical for efficient processing as well as the performance of the final product. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2679–2690     

Reaction parameters in the RAFT mediated dispersion polymerization of styrene

Monodisperse polystyrene (PS) particles were prepared by a living radical dispersion polymerization with a reversible addition‐fragmentation chain transfer (RAFT) agent in an ethanol medium. In the presence of RAFT agent, the effects of various reaction parameters on the characteristics of PS particles were systematically investigated. When no RAFT agent was involved, the number‐average molecular weight (M_n) of the PS particles increased from 17,800 to 30,000 g/mol, but the weight‐average diameter (D_w) decreased from 2.54 to 2.06 μm with the increase of poly(N‐vinylpyrrolidone) content from 4.0 to 16.0 wt %. No correlation between the M_n and the coefficient of variation (CV) was observed. However, when the RAFT concentration varied from 0 to 2.0 wt %, all of the conversion, M_n, D_w, CV, and polydispersity index (M_w/M_n) decreased. This indicates that the RAFT agent alters the inverse behavior between the molecular weight (MW) and particle size shown in the conventional dispersion polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 872–885, 2008     

Preparation of monodisperse nanoparticles containing poly(propylene imine)(NH2)32‐polystyrene

Polypropylenimine dendrimer (DAB‐Am‐32, generation 4.0) was converted into a macroinitiator DAB‐Am‐32‐Cl via reaction with 2‐chloropropionyl chloride. Monodisperse nanoparticles containing poly(propylene imine)(NH₂)₃₂‐polystyrene were prepared by emulsion atom transfer radical polymerization (ATRP) of styrene (St), using the DAB‐Am‐32‐Cl/CuCl/bpy as initiating system. The structure of macroinitiator was characterized by FTIR spectrum, ¹H NMR, and ¹³C NMR. The structure of poly(propylene imine)(NH₂)₃₂‐polystyrene was characterized by FT‐IR spectrum and ¹H NMR; the molecular weight and molecular weight distribution of poly(propylene imine)(NH₂)₃₂‐polystyrene were characterized by gel permeation chromatograph (GPC). The morphology, size and size distribution of the nanoparticles were characterized by photon correlation spectroscopy (PCS), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The effects of monomer/macroinitiator ratio and surfactant concentration on the size and size distribution of the nanoparticles were investigated. It was found that the diameters of the nanoparticles were smaller than 100 nm (30–80 nm) and monodisperse; moreover, the particle size could be controlled by monomer/macroinitiator ratios and surfactant concentration. With the increasing of the ratio of St/DAB‐Am‐32‐Cl, the number‐average diameter (D_n), weight‐average diameter (D_w) were both increased gradually. With enhancing the surfactant concentration, the measured D_h of the nanoparticles decreased, while the polydispersity increased. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2892–2904, 2009     

Particle formation in interval III of the emulsion polymerization of styrene with aerosol‐MA as an emulsifier

Particle nucleation in the seeded emulsion polymerization of styrene in the presence of Aerosol‐MA emulsifier micelles and in the absence of monomer droplets (interval III) was investigated. The seed particles were swollen with different amounts of the styrene monomer before the experiments. A larger number of polymer particles formed in interval III than in the corresponding seeded batch operation in the presence of monomer droplets. The increase in the number of particles could be attributed to the reduced rate of growth of new particles, which retarded the depletion of emulsifier micelles. The number of secondary particles initially increased with the initial polymer weight ratio in the seed particles (w_p0) but decreased at a higher range of w_p0, after reaching a maximum at w_p0 = 0.60, and eventually was reduced to zero. At high values of w_p0 (>0.75), polymerization occurred in the seed particles, whereas few or no new particles were formed despite the presence of micelles. The cessation of particle formation at high conversions was ascertained with a semibatch process in which the neat monomer feed was added to the reaction vessel containing the seed particles and emulsifier micelles. For w_p0 > 0.85, the emulsifier micelles were disintegrated to stabilize the seed particles with no secondary particle formation. The possible reasons for the cessation of particle formation at high w_p0 were examined. The size distribution of secondary particles showed a positive skewness in terms of volume because of the declining rate of growth for particles, together with a low rate of growth for small particles. The distribution breadth of new particles sharpened with increasing w_p0. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1652–1663, 2002     

Anionic polymerization of styrenic macromonomers of polyisoprene,polybutadiene, and polystyrene

Anionic polymerization and high‐vacuum techniques were used to prepare a series of well‐defined polyisoprene, polybutadiene, and polystyrene polymacromonomers. The procedure involved (1) the synthesis of styrenic macromonomers in benzene by the selective reaction of the corresponding macroanion with the chlorine of 4‐(chlorodimethylsilyl)styrene (CDMSS) and (2) the in situ anionic polymerization of the macromonomer without previous isolation. The synthesis of the macromonomers [polyisoprene macromonomer: 11 samples, weight‐average molecular weight (M_w) = 1000–18,000; polybutadiene macromonomer: 5 samples, M_w = 2000–4000; and polystyrene macromonomer: 2 samples, M_w = 1300 and 3600] was monitored by size exclusion chromatography with refractive index/ultraviolet detectors. Selectivity studies with CDMSS indicated that polybutadienyllithum had the highest selectivity, and polystryryllithium the lowest. From kinetic studies it was concluded that the polymerization half‐life times were longer but comparable to those of styrene, and they appeared to only slightly depend on the molecular weight of the macromonomer chain (at least for low degrees of polymerization of the polymacromonomer and for M_w < 7000 for the macromonomer side chain). Dependence on the polymerization degree of the polymacromonomer product was also observed. All the prepared polymacromonomers were characterized by size exclusion chromatography with refractive index, ultraviolet and two‐angle laser light scattering detectors, and NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1038–1048, 2005     

Facile synthesis of controlled‐structure primary amine‐based methacrylamide polymers via the reversible addition‐fragmentation chain transfer process

We report here a novel direct method for the syntheses of primary aminoalkyl methacrylamides that requires mild reagents and no protecting group chemistry. The reversible addition‐fragmentation chain transfer polymerization (RAFT) of the aminoalkyl methacrylamide revealed to be highly efficient with 4‐cyanopentanoic acid dithiobenzoate (CTP) as chain transfer agent and 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as initiator. Cationic amino‐based homopolymers of reasonably narrow polydispersities (M_w/M_n < 1.30) and predetermined molecular weights were obtained without recourse to any protecting group chemistry. A range of block and random copolymers were also synthesized via the RAFT process. The homopolymers and copolymers were characterized by aqueous conventional and triple detection gel permeation chromatography systems. Furthermore, the primary amine‐based methacrylamide monomers and polymers revealed to be highly stable both with the primary amino group in the protonated and deprotonated form. We have also demonstrated that stabilized gold nanoparticles can be generated with the RAFT‐synthesized amine‐based polymers via a photochemical process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4984–4996, 2008     

Formation and Gelation of Titania Nanoparticles from AOT Reverse Micelles

Titania nanoparticles have been produced by the controlled hydrolysis of tetraisopropyltitanate (TPT) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. Particle formation and aggregation were investigated by static and dynamic light scattering and the chemical species by vibrational spectroscopy. The kinetics of particle formation and aggregation were controlled by varying [H₂O]/[AOT] (w ₀), [H₂O]/[Ti(IV)] and [AOT]/[Ti(IV)]. Nanoparticles, with diameters<10 nm, could be produced at relatively high Ti(IV) concentrations (up to 0.05 M). These nanoparticles aggregated into sols, with colloid sizes of 20 to 200 nm, eventually forming gelatinous precipitates. Different titania phases were produced, depending on the size of the micellar water pool; small pools (w ₀<6) yielded amorphous particles, while larger pools (w ₀>10) produced anatase.     

Maximum tensile properties of oriented polyethylene,achieved by uniaxial drawing of solution‐grown crystal mats: Effects of molecular weight and molecular weight distribution

The effects of molecular weight (MW) and MW distribution on the maximum tensile properties of polyethylene (PE), achieved by the uniaxial drawing of solution‐grown crystal (SGC) mats, were studied. The linear‐PE samples used had wide ranges of weight‐average (M_w = 1.5–65 × 10⁵) and number‐average MWs (M_n = 2.0–100 × 10⁴), and MW distribution (M_w/M_n = 2.3–14). The SGC mats of these samples were drawn by a two‐stage draw technique, which consists of a first‐stage solid‐state coextrusion followed by a second‐stage tensile drawing, under controlled conditions. The optimum temperature for the second‐stage draw and the resulting maximum‐achieved total draw ratio (DR_t) increased with the MW. For a given PE, both the tensile modulus and strength increased steadily with the DR_t and reached constant values that are characteristic for the sample MW. The tensile modulus at a given DR_t was not significantly affected by the MW in the lower DR_t range (DR_t < 50). However, both the maximum achieved tensile modulus (80–225 GPa) and strength (1.0–5.6 GPa), as well as those at higher DR_ts > 50, were significantly higher for a higher MW. Although the maximum modulus reached 225 ± 5 for M_n ≥ 4 × 10⁵, the maximum strength continued to increase with M_n even for M_n > 4 × 10⁵, showing that strength is more strongly dependent on the M_n, even at higher M_n. Furthermore, it was found that each of the maximum tensile modulus and strength achieved could be expressed by a unique function of the M_n, independently of the wide variations of the sample MW and MW distribution. These results provide an experimental evidence that the M_n has a crucial effect on the tensile properties of extremely drawn and chain‐extended PE fibers, because the structural continuity along the fiber axis increases with the chain length, and hence with the M_n. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 153–161, 2006     

Polydispersity of ethylene sequence length in metallocene ethylene/α‐olefin copolymers. I. Characterized by thermal‐fractionation technique

In this article, the polydispersity of the ethylene sequence length (ESL) in ethylene/α‐olefin copolymers was studied by atomic force microscopy (AFM) and the thermal‐fractionation technique. The crystal morphology observation by AFM showed that morphology changed gradually with decreasing average ESL from complete lamellae over shorter and more curved lamellae to a granular‐like morphology, and the mixed morphology was observed after stepwise crystallization from phase‐separated melt. This result indicated that the ethylene sequence with different lengths crystallized into a crystalline phase with a different size and stability at the copolymer systems. The thermal‐fractionation technique was used to characterize the polydispersity of ESL. Three of the following statistical terms were introduced to describe the distribution of ESL and the lamellar thickness: the arithmetic mean L?_n, the weight mean L?_w, and the broadness index I = L?_w/L?_n. It was concluded that the polydispersity of ESL could be quantitatively characterized by the thermal‐fractionation technique. The effects of temperature range, temperature‐dependent specific heat capacity C_p of copolymer, and the molecular weight on the results of thermal fractionation were discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 813–821, 2002