Blue‐light‐emitting and anodically electrochromic materials of new wholly aromatic polyamides derived from the high‐efficiency chromophore 4,4′‐dicarboxy‐4″‐methyltriphenylamine

A series of organosoluble, aromatic polyamides were synthesized from a 4‐methyl‐substituted, triphenylamine‐containing, aromatic diacid monomer, 4,4′‐dicarboxy‐4″‐methyltriphenylamine, which is a blue‐light (454‐nm) emitter with a fluorescence quantum efficiency of 46%. These triphenylamine‐based, high‐performance polymers had strong fluorescence emissions in the blue region with high quantum yields up to 64% and one reversible oxidation redox couple around 1.20 V versus Ag/AgCl in acetonitrile solutions. They exhibited good thermal stability, with 10% weight loss temperatures above 480 °C under a nitrogen atmosphere and with relatively high glass‐transition temperatures (252–309 °C). All the polyamides revealed excellent stability of electrochromic characteristics, changing color from the original pale yellow to blue. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4095–4107, 2006     

Functional aramids: Aromatic polyamides with reactive azido and amino groups in the pendant structure

The structure of the high‐performance aromatic polyamides, also known as aramids, was modified to render functional polymers by the introduction of primary amine and azide functional groups in the main polymer chain. These materials were prepared as parent polymers for future use in the simple and inexpensive preparation of other high‐performance materials by the chemical derivatization of the primary amine and azide groups using their well‐known and broad reactivity. The potential of the parent aramids was exemplified with the preparation of four novel functional aramids containing the fluorescent dansyl group, the anion and cation receptors urea and triazole with free primary alcohol functional groups, and the iminophosphorane ligand for forthcoming synthetic processes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1469–1477     

Synthesis and properties of new aromatic polyamides with redox‐active 2,4‐dimethoxytriphenylamine moieties

A new triphenylamine‐based diamine monomer, 4,4′‐diamino‐2″,4″‐dimethoxytriphenylamine ( 2 ), was synthesized from readily available reagents and was reacted with various aromatic dicarboxylic acids to produce a series of aromatic polyamides ( 4a–h ) containing the redox‐active 2,4‐dimethoxy‐substituted triphenylamine (dimethoxyTPA) unit. All the resulting polyamides were readily soluble in polar organic solvents and could be solution cast into tough and flexible films. These polymers exhibited good thermal stability with glass transition temperatures of 243–289 °C and softening temperatures of 238–280 °C, 10% weight loss temperatures in excess of 470 °C in nitrogen, and char yields higher than 60% at 800 °C in nitrogen. The redox behaviors of the polymers were examined using cyclic voltammetry (CV). All these polyamides showed two reversible oxidation processes in the first CV scan. The polymers also displayed low ionization potentials as a result of their dimethoxyTPA moieties. In addition, the polymers displayed excellent stability of electrochromic characteristics with coloration change from a colorless neutral state to green and blue‐purple oxidized states. These anodically coloring polyamides showed high green coloration efficiency (CE = 329 cm²/C), high contrast of optical transmittance change (ΔT% = 84% at 829 nm), and long‐term redox reversibility. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3392–3401, 2010     

Synthesis and properties of high‐performance functional polyimides containing rigid nonplanar conjugated tetraphenylethylene moieties

A simple diamine (TetraPEDA) containing rigid nonplanar conjugated tetraphenylethylene (TetraPE) moieties was designed and synthesized through Wittig–Horner and Suzuki coupling reactions. Four kinds of high‐performance functional polyimides (PI) were thus prepared by the polymerization of TetraPEDA and four dianhydrides, respectively. Because of the introduction of the aromatic rigid nonplanar TetraPE structure, the PI exhibited special fluorescent characteristics, as the maximum fluorescence emission of the four PI was observed at 425–505 nm in NMP solution and at 470–491 nm in film state. Also these organo‐soluble PI showed outstanding properties, such as low dielectric constant (even without fluorinated substituent), light color, high glass transition temperatures (382–443 °C) and thermal stability in air (T_d5% up to 565 °C), and excellent mechanical properties. The polymer memory devices with the configuration of indium tin oxide/PI/aluminum (ITO/PI/Al) exhibited distinct volatile memory characteristics of static random access memory, with an ON/OFF current ratio of 1 × 10⁴ to 1 × 10⁵. These functional PI showed attractive potential applications in the field of high performance flexible polymer photoconducting devices or fluorescent polymer memory devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and fluorescence properties of dysprosium‐coordinated with high‐Tg polyaryletherketones containing carboxyl side groups

A series of novel dysprosium coordination polymers were synthesized using new high‐T_g carboxyl‐containing polyaryletherketones (PEKs) as macromolecular ligands and a small molecule, 1,10‐phenanthroline, as co‐ligand. The FTIR, WAXD, and UV–Vis results indicated that the dysprosium ions were coordinated simultaneously with carboxyl group of PEKs and 1,10‐phenanthroline, and homogeneously distributed along the polymer backbone. These obtained dysprosium coordination polymers showed excellent film‐formation properties. Moreover, all the dysprosium coordination polymers could exhibit the intense characteristic emission of dysprosium ions under UV excitation. Meanwhile, the emission intensity increased with increasing dysprosium ion content, and no obvious fluorescence quenching happened at the Dy³⁺ ion content up to 10.71 wt%, which was attributed to the very rigid structure of PEK and synergistic coordination effect of PEK and 1,10‐phenanthroline. Copyright © 2009 John Wiley & Sons, Ltd.     

Photochemical modification of polymer surface by the pendant photobase generator containing oxime‐urethane groups and its application to an image‐recording material

Copolymers containing oxime‐urethane groups were prepared by the copolymerization of methyl methacrylate and benzophenoneoximinocarbonylaminoethyl methacrylate (BCM), and their photochemical properties were examined from the UV and IR absorption spectral changes. The decomposed fraction of oxime‐urethane groups in the copolymer increased with irradiation time, but it decreased with the content of BCM units in the copolymer. Changes of the surface properties of the copolymer film on irradiation were studied by measurements of the contact angle and dyeing with an acid dye. The surface of the copolymer film changed to become more hydrophilic upon irradiation with 254 nm of UV light. After the irradiated copolymer films were treated with HCl or methanol, changes of the contact angle of water on irradiation were compared. The copolymer film was dyed by acid dyes after treatment of the irradiated film with HCl. The degree of dyeing increased with irradiation time and BCM units in the copolymer, but it was unaffected by the film thickness. Various colors were developed on the irradiated area depending on the acid dye as the developer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1200–1207, 2002     

Synthesis and characterization of new aromatic polyamides bearing crown ethers or their dipodal counterparts in the pendant structure. I. Benzo‐12‐crown‐4 and ortho‐bis(2‐ethoxyethoxy)benzene

Two novel isophthalic diacid‐based monomers have been synthesized by inclusion in ring position 5 of a functionalized benzoylamine moiety. The functionalization includes a 12‐crown‐4 ether group fused with the benzene subunit and a dipodand substructure, formally a disubstitution of the benzene ring, with two sequences of ethyl‐terminated ethylene oxide units, which represent the open‐chain counterpart of the alicylic crown moiety. The polycondensation of the two diacids with five aromatic diamines yielded 10 new polyamides with crown or podand pendant substructures. The polyamides had previously been chemically characterized by NMR, IR, and elemental analysis. The polymers showed high glass transition temperatures of up to 349 °C, good thermal stability (T_{donset, N2} ≈ 400 °C), and improved solubility in organic solvents. The presence of acyclic or alicyclic oxyethylene sequences as crown ether or podand substructures and an additional amide side group per repeat unit made the polymers essentially amorphous and improved their water absorption ability in comparison with nonsubstituted polyamides. Water uptake values as high as 12% were observed at 65% relative humidity. All the polyamides showed a good film‐forming ability, and the mechanical properties of these films are considered to be satisfactory for experimental aromatic polyamides. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2270–2281, 2006     

Synthesis and electrochromic performance of oligoaniline‐containing polyureas capped with various functional groups

Tuning the molecular structure is an effective strategy to modulate the electrochromic behaviors of conducting polymers. In this contribution, a novel oligoaniline‐containing polyurea ended with reactable isocyanate groups is designed and synthesized via nucleophilic polymerization. Then various functional groups such as o‐toluidine, poly(ethylene glycol) (PEG), ethoxysilane, and congo red (CR) are introduced as end groups to modulate the electrochromic performance. Hydrophilic PEG could improve the switching speed due to the rapid electrolyte ions diffusion into polymer film through the hydrophilic region. An enhanced switching stability is afforded by crosslinkable ethoxysilane end groups, ascribed to crosslinked densified surface and great adhesion force between the electrochromic layer and ITO substrate through the hydrolysis reaction. Moreover, an ample color change is achieved by introducing colored CR as end groups. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 412–419     

Synthesis and characterization of new aromatic polyamides bearing crown ethers or their dipodal counterparts in the pendant structure. II. Benzo‐15‐crown‐5 and ortho‐bis[2‐(2‐ethoxyethoxy)ethoxy]benzene

This article describes the synthesis and characterization of two diacid monomers, each containing a benzo‐15‐crown‐5 subunit or its dipodal counterpart. Both novel monomers were reacted with technical aromatic diamines with Yamazaki's direct polyamidation method to render modified polyisophthalamides with high molecular weights containing side moieties of cyclic and acyclic ethylene oxide sequences. All the polymers were soluble in aprotic polar solvents and showed high glass‐transition temperatures in the range of 190–345 °C. The polymers with side crown ethers showed much higher glass‐transition temperatures than those with acyclic linear side ethylene oxide arms. The chemical composition, particularly with respect to the diamine and the open or closed character of the pendent ethylene oxide sequence, also affected other general properties such as the mechanical resistance, mechanical modulus, or water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4063–4075, 2006     

Radical polymerization behavior of a vinyl monomer bearing five‐membered cyclic carbonate structure and reactions of the obtained polymers with amines

Radical polymerization behavior of a vinyl substituted cyclic carbonate, 4‐phenyl‐5‐vinyl‐1,3‐dioxoran‐2‐one ( 1 ), is described. Radical polymerization of 1 proceeded through selective vinyl polymerization to produce polymers bearing carbonate groups in the side chain, in contrast to that of an oxirane analogue of 1 , 1‐phenyl‐2‐vinyl oxirane that proceeds via the selective ring‐opening fashion. Although the homopolymerization of 1 produce polymers in relatively lower yield, copolymerizations effectively provided cyclic carbonate‐containing copolymers. Nucleophilic addition of primary amines to the resulting homopolymers and copolymers produced the corresponding multifunctional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 584–592, 2005     

New P‐type of poly(4‐methoxy‐triphenylamine)s derived by coupling reactions: Synthesis,electrochromic behaviors,and hole mobility

Methoxy‐substituted poly(triphenylamine)s, poly‐4‐methoxytriphenylamine ( PMOTPA ), and poly‐N,N‐bis(4‐methoxyphenyl)‐N′,N′‐diphenyl‐p‐phenylenediamine ( PMOPD ), were synthesized from the nickel‐catalyzed Yamamoto and oxidative coupling reaction with FeCl₃. All synthesized polymers could be well characterized by ¹H and ¹³C NMR spectroscopy. These polymers possess good solubility in common organic solvent, thermal stability with relatively high glass‐transition temperatures (T_gs) in the range of 152–273 °C, 10% weight‐loss temperature in excess of 480 °C, and char yield at 800 °C higher than 79% under a nitrogen atmosphere. They were amorphous and showed bluish green light (430–487 nm) fluorescence with quantum efficiency up to 45–62% in NMP solution. The hole‐transporting and electrochromic properties are examined by electrochemical and spectroelectrochemical methods. All polymers exhibited reversible oxidation redox peaks and E_onset around 0.44–0.69 V versus Ag/AgCl and electrochromic characteristics with a color change under various applied potentials. The series of PMOTPA and PMOPD also showed p‐type characteristics, and the estimated hole mobility of O ‐ PMOTPA and Y ‐ PMOPD were up to 1.5 × 10^?4 and 5.6 × 10^?5 cm² V^?1 s^?1, respectively. The FET results indicate that the molecular weight, annealing temperature, and polymer structure could crucially affect the charge transporting ability. This study suggests that triphenylamine‐containing conjugated polymer is a multifunctional material for various optoelectronic device applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4037–4050, 2009     

Cyclotrimerization of diisocyanates toward high‐performance networked polymers with rigid isocyanurate structure: Combination of aromatic and aliphatic diisocyanates for tunable flexibility

A series of networked polymers bearing isocyanurate moiety was synthesized by cyclotrimerization of diisocyanates, with employing methylenediphenyl 4,4′‐diisocyanate and 1,6‐hexamethylenediisocyanate (HMDI) in several feed ratios. In spite of the large difference in intrinsic reactivity between these two diisocyanates, their coannulation proceeded efficiently by using sodium p‐toluenesulfinate (pTolSO₂Na) and 1,3‐dimethyl‐2‐imidazolidinone as a catalyst and a solvent, respectively. The resulting networked polymers were transparent and exhibited excellent thermal stability. In addition, HMDI‐rich feed ratios allowed for the formation of networked polymers with increased flexibility. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2631–2637     

Exhaustive and partial alkoxylation of polymethylhydrosiloxane by copper‐catalyzed dehydrocoupling with alcohols: Synthesis,crosslinking behavior,and thermal properties of the products

Polymethylhydrosiloxane (PMHS) reacts with aliphatic and aromatic alcohols at room temperature in the presence of [CuH(PPh₃)]₆ complex catalyst to give poly[(methyl) (alkoxy)siloxane]s in high yields. Reactivity of alcohols decreases in the order of p‐methoxyphenol > p‐cresol > phenol > benzyl alcohol > allyl alcohol > ethanol > isopropanol > tert‐butyl alcohol. Partially p‐cresylated polymers, which still retain unreacted Si? H bonds, react further with ethylene glycol or water to form cross‐linked polymers, which, depending on the extent of cross linking, gelate during the cross‐linking process. Propargyl alcohol reacts with PMHS very rapidly to give exhaustively and partially propargyloxylated PMHS. Resulting polymers, upon heating, undergo crosslinking. Partially propargyloxylated polymers display high thermal stability [T_d5 (temperature of 5% weight loss) > 500 °C] as compared with starting PMHS (243 °C) and exhaustively propargyloxylated one (414 °C). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of high‐molecular‐weight linear methacrylate copolymers with spiropyran side groups: Conformational changes of single molecules in solution and on surfaces

P(BMA‐co‐HEMA‐spiropyran) was synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization of butyl methacrylate (BMA) and 2‐(trimethylsilyloxy)‐ethyl methacrylate (HEMA‐TMS), removal of the TMS‐protective groups, and the polymer analogous esterification of the hydroxyethyl side chains with a spiropyran containing a carboxylic acid group. UV‐induced conformational changes of the synthesized macromolecules and low‐molecular‐weight spiropyran molecules were studied. Rate constants and half‐life times of the ring closure reaction from zwitterionic merocyanine to the spiropyran species were determined in the presence and absence of mica‐dispersed particles in toluene both with the free spiropyran and the polymer‐bound spiropyran. Scanning force microscopy was used to visualize the conformation of spiropyran‐decorated single macromolecular chains and agglomerated polymer‐bound merocyanine adsorbed on mica. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1274–1283, 2009     

New series of AB2‐type hyperbranched polytriazoles derived from the same polymeric intermediate: Different endcapping spacers with adjustable bulk and convenient syntheses via click chemistry under copper(I) catalysis

In this article, according to the concept of “suitable isolation group,” six new AB₂‐type polytriazoles containing azo‐chromophore moieties, derived from the same hyperbranched polymer intermediate, were successfully prepared through click reaction under copper(I) catalysis by modifying the synthetic route, in which different isolation groups in different size were introduced to the periphery of the hyperbranched polymers as end‐capping moieties. With the different end‐capping groups, these hyperbranched polymers, P1 – P6 , exhibited different solubility and processability; also, their nonlinear optical properties were modified accordingly, realizing the adjustment of the properties of hyperbranched polymers through the structural design. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Application of thiol‐ene click chemistry to preparation of functional polyethylene with high molecular weight and high polar group content: Influence of thiol structure and vinyl type on reactivity

A series of functional polyethylenes have been simply and efficiently synthesized via the combination of regioselective ethylene/5‐vinyl‐2‐norbornene (VNB) copolymerization using [PhNC(CF₃)CHCO(Ph)]₂TiCl₂ catalyst and following ultraviolet light initiated thiol‐ene click reaction. On treatment of ethylene/VNB copolymer with different thiols including mercaptoethanol, 1‐thioglycerol, methyl mercaptoacetate, methyl mercaptopropionate, 2‐mercaptoethylamine, mercaptoacetic acid, and mercaptopropanoic acid, various polar groups have been successfully introduced into the polyethylene. Except 2‐mercaptoethylamine, the functionalizations are quite efficient with the degree of functionalization higher than 94%, which is independent of thiol structure and double bond content. The content of polar group in functional polyethylene can be tuned in a wide range of 0–30 mol %. Gel permeation chromatography profiles indicate all functional polyethylenes that have very high molecular weights (160–336 kg/mol) with homogeneous formation. Besides, systematic investigation of the influence of vinyl type and thiol structure on reactivity has been also carried out. By treatment of mercaptoethanol with different copolymers (ethylene/VNB, ethylene/5‐ethylidene‐2‐norbornene, and ethylene/dicyclopentadiene copolymer), the order of vinyl reactivity can be summarized as terminal > internal > cyclic double bond. For different thiols, the reactivity has the sequence of SHCH₂COOH > SHCH₂COOCH₃ > SHCH₂CH₂COOH > SHCH₂CH₂COOCH₃ > SHCH₂CH(OH)CH₂OH > SHCH₂CH₂OH > SHCH₂CH₂NH₂, which is depended on the solubility and the electron‐withdrawing inductive effect of polar group. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Chemical profiling approach to evaluate the influence of traditional and simplified decoction methods on the holistic quality of Da‐Huang‐Xiao‐Shi decoction using high‐performance liquid chromatography coupled with diode‐array detection and time‐of‐flight mass spectrometry

Da‐Huang‐Xiao‐Shi decoction, consisting of Rheum officinale Baill, Mirabilitum, Phellodendron amurense Rupr. and Gardenia jasminoides Ellis, is a traditional Chinese medicine used for the treatment of jaundice. As described in “Jin Kui Yao Lue”, a traditional multistep decoction of Da‐Huang‐Xiao‐Shi decoction was required while simplified one‐step decoction was used in recent repsorts. To investigate the chemical difference between the decoctions obtained by the traditional and simplified preparations, a sensitive and reliable approach of high‐performance liquid chromatography coupled with diode‐array detection and electrospray ionization time‐of‐flight mass spectrometry was established. As a result, a total of 105 compounds were detected and identified. Analysis of the chromatogram profiles of the two decoctions showed that many compounds in the decoction of simplified preparation had changed obviously compared with those in traditional preparation. The changes of constituents would be bound to cause the differences in the therapeutic effects of the two decoctions. The present study demonstrated that certain preparation methods significantly affect the holistic quality of traditional Chinese medicines and the use of a suitable preparation method is crucial for these medicines to produce special clinical curative effect. This research results elucidated the scientific basis of traditional preparation methods in Chinese medicines.