A doubly responsive AB diblock copolymer: RAFT synthesis and aqueous solution properties of poly (N‐isopropylacrylamide‐block‐4‐vinylbenzoic acid)

We describe herein the synthesis and self‐assembly characteristics of a doubly responsive AB diblock copolymer comprised of N‐isopropylacrylamide (NIPAM) and 4‐vinylbenzoic acid (VBZ). The AB diblock copolymer was prepared via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization in DMF employing a trithiocarbonate‐based RAFT agent. PolyNIPAM was employed as the macroRAFT agent. The NIPAM homopolymerization was shown to possess all the characteristics of a controlled process, and the blocking with VBZ was judged, by size exclusion chromatography, to be essentially quantitative. The NIPAM‐VBZ block copolymer was subsequently demonstrated to be able to form normal and inverse micelles in the same aqueous solution by taking advantage of the stimuli responsive characteristics of both building blocks. Specifically, and as judged by NMR spectroscopy and dynamic light scattering, raising the temperature to 40 °C (above the lower critical solution temperature of the NIPAM block), while at pH 12 results in supramolecular self‐assembly to yield nanosized species that are composed of a hydrophobic NIPAM core stabilized by a hydrophilic VBZ corona. Conversely, lowering the solution pH to 2.0 at ambient temperature results in the formation of aggregates in which the VBZ block is now hydrophobic and in the core, stabilized by the hydrophilic NIPAM block. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5864–5871, 2007     

Facile synthesis of pH‐responsive glycopolypeptides with adjustable sugar density

Well‐defined pH‐responsive glycopolypeptides were prepared by polymer‐analogous aqueous amide coupling of d ‐glucosamine to poly(α,l ‐glutamic acid) (PGA) using the coupling agent 4‐(4,6‐dimethoxy‐1,3,5‐triazin‐2‐yl)‐4‐methylmorpholinium chloride (DMT‐MM) without any organic solvents, additives, or buffers. Degrees of substitution (DS) up to 80% can be achieved, and the DS is adjustable by the molar ratio of DMT‐MM to PGA repeating units. Successful glycosylation of both low MW and high MW PGA was confirmed by ¹H NMR and FTIR spectroscopy as well as by an enhanced solubility at low pH. CD spectroscopy revealed that glycosylated PGAs with a DS up to 0.63 are able to undergo a pH‐responsive and reversible helix‐coil transition. However, for polymers with higher DS no transition occurs. A comparison with PGAs functionalized with monoethanolamine showed that the low helicity at high DS is not a steric effect due to the bulky sugar moieties, but a solvation effect. Preliminary turbidimetric tests with the lectin Concanavalin A indicate a biological activity of these glycosylated polypeptides. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3925–3931     

End group effect on the thermo‐sensitive properties of well‐defined water‐soluble polystyrenics with short pendant oligo(ethylene glycol) groups synthesized by nitroxide‐mediated radical polymerization

The effects of hydrophobic chain end groups on the cloud points of thermo‐sensitive water‐soluble polystyrenics were investigated. Well‐defined poly (4‐vinylbenzyl methoxytris(oxyethylene) ether) (PTEGSt) and poly(α‐hydro‐ω‐(4‐vinylbenzyl)tetrakis(oxyethylene)) (PHTrEGSt) were prepared by nitroxide‐mediated radical polymerization using α‐hydrido alkoxyamine initiators including two monomer‐based initiators. The polymers were reduced with (n‐Bu)₃SnH to replace the alkoxyamine end group with hydrogen. In the studied molecular weight range (M_n,GPC = 3000 to 28,000 g/mol), we found that the hydrophobic end groups decreased the cloud point by 1–20 °C depending on the molecular weight and the largest depression was observed at the lowest molar mass. The cloud points of PTEGSt and PHTrEGSt with two hydrophobic end groups, phenylethyl and alkoxyamine, exhibited a monotonic increase with the increase of molecular weight. For polymers with only one hydrophobic end group, either phenylethyl or alkoxyamine, the cloud point initially increased with the increase of molecular weight but leveled off/decreased slightly with further increasing molar mass. For polymers with essentially no end groups, the cloud point decreased with the increase of chain length, which represents the “true” molecular weight dependence of the cloud point. The observed molecular weight dependences of the cloud points of polystyrenics with hydrophobic end group(s) are believed to result from the combined end group effect and “true” molecular weight effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3707–3721, 2007     

Multifunctional,water‐soluble,C60‐pendant maleic anhydride copolymer

Starting from the synthesis of a new methanofullerene derivative bearing an alcohol group, we report on the preparation of a water‐soluble, fullerene‐pendant copolymer. This multifunctional, C₆₀‐pendant maleic anhydride copolymer was characterized by conductometric titration, Fourier transform infrared and ultraviolet spectroscopy, thermogravimetric analysis, and cyclic voltammetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5814–5822, 2005     

Solvation characteristics of a model water‐soluble polymer

The model water‐soluble polymer poly(ethylene oxide) was used to investigate solvation characteristics in mixtures of d‐water (deuterated water) and d‐alcohols (deuterated alcohols). Three d‐alcohols have been used: d‐methanol, d‐ethanol, and d‐ethylene glycol. Small angle neutron scattering was used to monitor the solvation properties of poly(ethylene oxide) in the d‐solvent mixtures. Nonideal solvent mixing was observed throughout. Solvent mixtures were found to be more effective solvating agents than individual solvents. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3195–3199, 2006     

Well‐defined thermosensitive,water‐soluble polyacrylates and polystyrenics with short pendant oligo(ethylene glycol) groups synthesized by nitroxide‐mediated radical polymerization

We report the synthesis and thermosensitive properties of well‐defined water‐soluble polyacrylates and polystyrenics with short pendant oligo(ethylene glycol) groups. Four monomers, methoxydi(ethylene glycol) acrylate (DEGMA), methoxytri(ethylene glycol) acrylate (TEGMA), α‐hydro‐ω‐(4‐vinylbenzyl)tris(oxyethylene) (HTEGSt), and α‐hydro‐ω‐(4‐vinylbenzyl)tetrakis(oxyethylene) (HTrEGSt), were prepared and polymerized by nitroxide‐mediated radical polymerization with 2,2,5‐trimethyl‐3‐(1‐phenylethoxy)‐4‐phenyl‐3‐azahexane as an initiator. Kinetics and gel permeation chromatography analysis showed that the polymerizations were controlled processes yielding polymers with controlled molecular weights and narrow polydispersities. All polymers could be dissolved in water, forming transparent solutions, and undergo phase transitions when the temperature was above a critical point. The thermosensitive properties were studied by turbidimetry and variable‐temperature ¹H NMR spectroscopy. The cloud points of the polymers of DEGMA, TEGMA, HTEGSt, and HTrEGSt were around 38, 58, 13, and 64 °C, respectively. For all four polymers, the cloud point increased with decreasing concentration and increasing molecular weight in the studied molecular weight range of 5000–30,000 g/mol. The removal of the nitroxide group from the polymer chain end resulted in a higher cloud point. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2454–2467, 2006     

Synthesis of water‐soluble zwitterionic polysiloxanes

A series of water‐soluble siloxane polymers with pendent phosphorylcholine (PC) and sulfobetaine (SB) zwitterions was prepared using thiol‐ene “click” chemistry. Specifically, well‐defined vinyl‐substituted siloxane homopolymers and block copolymers were functionalized with small molecule zwitterionic thiols at room temperature. Rapid and quantitative substitution of the pendent vinyl groups was achieved, and zwitterionic polysiloxanes of narrow molecular weight distribution were obtained. The PC‐ and SB‐substituted polymers were found to be readily soluble in pure, salt‐free water. Critical micelle concentrations (CMCs) of these polymers in water were measured using a pyrene fluorescence probe, with CMC values estimated to be <0.01 g/L. Polymer aggregates were studied by dynamic light scattering, and the micelles generated from the PC block copolymers were visualized, after drying, by transmission electron microscopy. Aqueous solutions of these zwitterionic polysiloxanes significantly reduced the oil‐water interfacial surface tension, functioning as polymer amphiphiles that lend stability to oil‐in‐water emulsions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 127–134     

Photoresponsive water‐dispersible polyaniline nanoparticles through template synthesis with copolymer micelle containing coumarin groups

A novel kind of photosensitive water‐dispersible polyaniline (PANI) nanoparticles was designed and prepared by template synthesis using a photo‐responsive vinyl‐coumarin (VM)/2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) copolymer micelle containing coumarin moieties. The resulting PANI nanoparticles exhibited reversible photo‐crosslinking and photo‐decrosslinking behavior similar to coumarin moiety upon irradiation with different UV light as verified by UV–vis absorption. In addition, photoinduced size change of the PANI nanoparticles after 365 nm UV light irradiation was successfully monitored by dynamic light scattering and transmission electron microscopy measurements, further confirming the photosensitivity of the obtained PANI nanoparticles by the incorporation of VM/AMPS copolymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and antibacterial activities of water‐soluble methacrylate polymers containing quaternary ammonium compounds

New water‐soluble methacrylate polymers with pendant quaternary ammonium (QA) groups were synthesized and used as antibacterial materials. The polymers with pendant QA groups were obtained by the reaction of the alkyl halide groups of a previously synthesized functional methacrylate homopolymer with various tertiary alkyl amines containing 12‐, 14‐, or 16‐carbon alkyl chains. The structures of the functional polymer and the polymers with QA groups were confirmed with Fourier transform infrared and ¹H and ¹³C NMR. The degree of conversion of alkyl halides to QA sites in each polymer was determined by ¹H NMR to be over 90% in all cases. The number‐average molecular weight and polydispersity of the functional polymer were determined by size exclusion chromatography to be 32,500 g/mol and 2.25, respectively. All polymers were thermally stable up to 180 °C according to thermogravimetric analysis. The antibacterial activities of the polymers with pendant QA groups against Staphylococcus aureus and Escherichia coli were determined with broth‐dilution and spread‐plate methods. All the polymers showed excellent antibacterial activities in the range of 32–256 μg/mL. The antibacterial activity against S. aureus increased with an increase in the alkyl chain length for the ammonium groups, whereas the antibacterial activity against E. coli decreased with increasing alkyl chain length. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5965–5973, 2006     

Synthesis and solution properties of a pH‐responsive cyclopolymer of zwitterionic ethyl 3‐(N,N‐diallylammonio)propanephosphonate

The zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)propanephosphonate, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide or ammonium persulfate as initiators to afford a polyphosphonobetaine (PPB). The protonation of P(?O)OEtO^– and deprotonation of ? NH⁺ groups in PPB by HCl and NaOH, gave the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The presence of two pH‐responsive functionalities in APP has led to establish the equilibria: APP ? PPB ? CPP, the position of which very much dictates the viscosity behavior of its aqueous solution. The PPB demonstrated “antipolyelectrolyte” viscosity behavior; however, in contrast to many polycarbo‐ and polysulfo‐betaines, it was found to be soluble in salt‐free water as well as in salt‐added solutions. Basicity constant (K₁) of the amine group in APP, as determined by potentiometric technique, were found to be “apparent,” and as such followed the modified Henderson‐Hasselbalch equation. The study demonstrated a correlation between the basicity constants and viscosity values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of a water‐soluble diblock copolymer of polysulfonic diphenyl aniline and poly(ethylene oxide)

We report the synthesis of a water‐soluble diblock copolymer composed of polysulfonic diphenyl aniline (PSDA) and poly(ethylene oxide) (PEO), which was prepared by reacting an amine‐terminated PSDA and tosylate PEO (PEO‐Tos). First, a HCl‐mediated polymerization of sulfonic diphenyl aniline monomer with the formation of HCl‐doped PSDA was carried out. After its neutralization and reduction, a secondary amine‐functionalized PSDA was obtained. Second, PEO‐Tos was synthesized via the tosylation of the monohydroxyl PEO methyl ether with tosylol chloride. Diblock copolymers with various PEO segment lengths (PSDA‐b‐PEO‐350 and PSDA‐b‐PEO‐2000) were obtained with PEO‐350 [number‐average molecular weight (M_n) = 350] and PEO‐2000 (M_n = 2000). The prepolymers and diblock copolymers were characterized by Fourier transform infrared spectroscopy, NMR, mass spectrometry, and ultraviolet–visible light. They had relatively low conductivities, ranging from 10^?6 to 10^?3 S/cm, because of the withdrawing effect of the sulfonic group as well as the steric effects of the bulky aromatic substitutuents at the N sites of the polyaniline backbone and of the PEO block. These polymers were self‐doped, and an intermolecular self‐doping was suggested. The external doping was, however, more effective. The self‐doping induced aggregation in water among the PSDA backbones, which was also stimulated by the presence of hydrophilic PEO blocks. Furthermore, the electrical conductivities of the diblock copolymers were strongly temperature‐dependent. PSDA‐b‐PEO‐2000 exhibited about one order of magnitude increase in conductivity upon heating from 32 to 57 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2179–2191, 2004     

ROMP synthesis of novel thermo‐, pH‐, and salt‐responsive (co)polymers containing the morpholino functional group

We report the ring‐opening metathesis polymerization (ROMP) synthesis of novel (co)polymers containing the multiresponsive morpholino functional group [(3aR,7aS)?2‐(2‐morpholinoethyl)?3a,4,7,7a‐tetrahydro‐1H?4,7‐epoxyisoindole‐1,3(2H)‐dione ( M1 )]. All (co)polymers were prepared with the Grubbs' first generation initiator, RuCl₂(PCy₃)₂CHPh, in CH₂Cl₂ or CH₂Cl₂/2,2,2‐trifluoroethanol solvent mixtures. M1 homopolymers exhibit a pH dependent aqueous solubility being fully soluble below pH 5.0 and above pH 6.0. At these intermediate values, the polymers exhibit molecular weight (MW) independent inverse temperature dependent solubility with measured cloud points (T_CP) of 86 °C at pH 5.0 and 79 °C at pH 6.0. In the case of the lowest MW homopolymer (absolute MW of 9950 g/mol), there was a clear dependence of the T_CP on the homopolymer solution concentration and varied over the range 78–88 °C. The T_CP could be further tuned via the preparation of novel AB statistical copolymers. Incorporation of a permanently cationic comonomer as a more hydrophilic species resulted in an increase of the T_CP at low incorporations (up to 10 mol %) and the complete disappearance of any temperature dependent solubility at 20 mol %. In a complementary approach, the T_CP could also be lowered by the preparation of statistical copolymers of M1 with a more hydrophobic comonomer. Finally, we note that M1 homopolymers are also responsive to Na₂SO₄ and could be readily salted‐out of an aqueous solution salt at a [Na₂SO₄] of 2.0 M giving a third trigger for controlling aqueous solubility. These copolymers represent examples of new multiresponsive materials and demonstrate the effectiveness of ROMP as a synthetic tool for the preparation of new and interesting materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 50–58     

pH‐responsive polyphosphonates using butler's cyclopolymerization

The cationic monomer, N,N‐diallyl‐(diethylphosphonato)methylammonium chloride, and zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)methanephosphonate, were cyclopolymerized in aqueous solutions using ammonium persulfate or t‐butylhydroperoxide as initiators to afford a cationic polyelectrolyte (CPE) and a polyzwitterion ester (PZE), respectively. The CPE and PZE on acidic hydrolysis of the ester functionalities afforded the same polyzwitterionic acid (PZA): poly[3‐(N,N‐diallylammonio)methanephosphonic acid]. The solution properties of the CPE, pH‐responsive PZE, and PZA were studied in detail by potentiometric and viscometric techniques. Basicity constants of the phosphonate (P?O(OEt)O^?) and amine groups in the PZE and in the conjugate base of the PZE, respectively, were found to be “apparent” and as such follow the modified Henderson–Hasselbalch equation. In contrast to many polycarbobetaines and sulfobetaines, PZE was found to be soluble in salt‐free water as well as salt (including Ca²⁺, Li⁺)‐added solutions, and demonstrated “antipolyelectrolyte” solution behavior. The PZA, on the other hand, was found to be insoluble in salt‐free water, and on treatment with NaOH gave dianionic polyelectrolyte (DAPE) containing trivalent nitrogen and [P?O(O)₂^2?] groups. For the first time, several new phase diagrams of polyethylene glycol‐DAPE aqueous two‐phase systems (ATPSs) have been constructed in the presence of varying proportions of HCl. The ATPSs may find application in affinity partitioning of metal ions because DAPE is expected to be an effective chelator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of water‐soluble azlactone copolymers

Preparation and study of a series of copolymers incorporating 2‐vinyl‐4,4‐dimethylazlactone (VDMA) is reported. The reactivity ratios for photo‐initiated free radical copolymerization of VDMA with methacrylic acid (MAA), acrylic acid (AA), acrylamide (AAm), dimethylacrylamide (DMAA), hydroxyethyl methacrylate (HEMA), methoxy poly(ethylene glycol) methacrylate (MPEG₃₀₀MA), and 2‐methacryloyloxyethyl phosphorylcholine (MPC), were determined by fitting comonomer conversion data obtained by in situ ¹H NMR to a terminal copolymerization equation. Semi‐batch photo‐copolymerizations were then used to synthesize the corresponding VDMA copolymers with constant composition. Their solubility and dissolution behavior, as well as their hydrolysis half‐lives under physiological conditions, were determined. P(VDMA‐co‐MAA) copolymers with 52 to 93 mol % VDMA showed decreasing initial solubility and increasing hydrolysis half‐lives with increasing VDMA content. VDMA copolymers with nonionic monomers AAm and DMAA were water soluble only at VDMA contents of 41 and 22 mol % or less, respectively, and showed longer hydrolysis half‐lives than comparable MAA copolymers. VDMA copolymers with HEMA and MPEG₃₀₀MA were found to crosslink during storage, so their hydrolysis half‐lives were not determined. VDMA copolymers with 18% zwitterionic MPC showed a much longer half‐life and superior initial solubility compared to analogous p(VDMA‐co‐MAA), identifying this copolymer as a promising candidate for macromolecular crosslinkers in, for example, aqueous layer‐by‐layer co‐depositions with polyamines. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New environmentally responsive fluorescent N‐isopropylacrylamide copolymer and its application to DNA sensing

We report two novel multifunctional copolymers consisting of a temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAA) segment and a fluorescent fluorene‐containing acrylic polymer segment with pH responsiveness and/or DNA‐sensing ability. The functional acrylic monomer with a fluorene dimer side group substituted with amino units was synthesized first. Then, it was copolymerized with N‐isopropylacrylamide to result in a new water‐soluble, fluorescent PNIPAA copolymer ( P1 ). The fluorescent properties of P1 under neutral and acidic conditions did not change with the temperature. However, significant variation was observed under basic conditions. The protonation of the amino moiety at a low pH improved the solubility and prevented aggregation for fluorescence quenching, but not under the basic conditions. Although aggregation of the fluorene units was significant at room temperature under basic conditions, the aggregation was resolved at a temperature above the lower critical solution temperature. These findings indicated the pH‐ and temperature‐responsive characteristics of P1 . Moreover, after the amino groups were quaternized, the obtained polymer could be used as a biosensor because the fluorescence intensity was quenched with the addition of DNA. This study demonstrates that multifunctional materials with pH‐ and temperature‐sensing characteristics and biological molecules could be realized by the incorporation of a functional fluorene‐containing moiety with PNIPAA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5495–5504, 2006     

Microwave‐assisted nitroxide‐mediated polymerization for water‐soluble homopolymers and block copolymers synthesis in homogeneous aqueous solution

We performed a critical reinvestigation of microwave enhancement of nitroxide‐mediated polymerization (NMP) of acrylamide (AM) in aqueous media in the dynamic (DYN) mode with a combination of a conventional hydrosoluble radical initiator and a β‐phosphonylated nitroxide (SG1). Based on the results of our previous work, a complementary series of polymerization reactions was carried out between 130 and 160 °C using only the DYN mode to ascertain the existence of a microwave effect. The polymer conversion (p), molar masses, polydispersity index, and viscosity of each sample were measured. The temperature was monitored inside and outside of the vessel using an optical fiber sensor and an IR sensor, respectively. Microwave enhancement of polymerization, temperature control and viscosity of the reaction media were closely related. We also furthered the field of hydrophilic AB diblock copolymer synthesis using a tertiary SG1‐based macroalkoxyamine and directly synthesized both poly(acrylamide‐b‐sodium 2‐acrylamido‐2‐methylpropanesulfonate), a neutral‐b‐anionic diblock copolymer, and poly(acrylamide‐b‐3‐dimethyl(methacrylamidopropyl)ammonium propanesulfonate), a neutral‐b‐zwitterionic diblock copolymer, in homogeneous aqueous media. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and aqueous solution properties of hydrophobically modified anionic acrylamide copolymers

In this investigation, hydrophobically modified polyacrylamide with low amounts of anionic long‐chain alkyl was synthesized by the free radical polymerization in deionized water. This water‐soluble copolymerization method is more convenient compared with the traditional micellar copolymerization methods. The copolymers were characterized using Fourier transform infrared, ¹H NMR, and the molecular weight and polydispersity were determined using gel permeation chromatography. The solution behavior of the copolymers was studied as a function of composition, pH, and added electrolytes. As NaCl was added to solutions of AM/C₁₁AM copolymers or pH was lowered, the shielding or elimination of electrostatic repulsions between carboxylate groups of the C₁₁AM unit lead to coil shrinkage. The steady shear viscosity and dynamic shear viscoelastic properties in semidilute, salt‐free aqueous solutions were conducted to examine the concentration effects on copolymers. In addition, the shear superimposed oscillation technique was used to probe the structural changes of the network under various stresses or shear conditions. We prepared hydrophobically modified polyacrylamide with N‐alkyl groups in the aqueous medium. The advantage of this method is that the production is pure without surfactants. These results suggest that the unique aqueous solution behavior of the copolymers is different from conventional hydrophobically associating acrylamide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2465–2474, 2008     

Functional dye as a comonomer in a water‐soluble polymer

In many applications, a functional additive is blended into a polymer matrix to enhance its properties. However, when the polymer and functional additive are applied to a surface, the functional molecule may be easily lost. In favorable cases, it may be possible to incorporate the additive directly into the polymer as a comonomer. In this study, a functionalized polymer has been obtained through the combination of linking a photodynamic, antimicrobial dye, Rose Bengal, to vinyl benzyl chloride via etherification and then polymerizing this into a water‐soluble polymer using chain growth copolymerization. Characterization of the efficiency of synthesis, solubility of the final product, and singlet oxygen production rate has been performed. Dialysis was used to determine the extent of incorporation of the dye into the polymer. The chemical structure of the intermediate produced through etherification has been verified. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1594–1599