Dendronized polymers via Diels–Alder “click” reaction

A modular approach toward the synthesis of polymers containing dendron groups as side chains is developed using the Diels–Alder “click” reaction. For this purpose, a styrene‐based polymer appended with anthracene groups as reactive side chains was synthesized. First through third‐generation polyester dendrons containing furan‐protected maleimide groups at their focal point were synthesized. Facile, reagent‐free, thermal Diels–Alder cycloaddition between the anthracene‐containing polymer and latent‐reactive dendrons leads to quantitative functionalization of the polymer chains to afford dendronized polymers. The efficiency of this functionalization step was monitored using ¹H and ¹³C NMR spectroscopy and FTIR and UV–vis spectrometry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 410–416, 2010     

Synthesis of well‐defined and end‐polymerizable star‐shaped polysulfides and their application to negative photoresist

Various star‐shaped poly(phenoxy propylene sulfide)s (PPSs) bearing curable end groups were synthesized by the functionalization of the propagating ends of star‐shaped poly(PPS) with various electrophilies. The functionalization with chloromethyl styrene proceeded quantitatively, and afforded polymers with M_n almost agreed with theoretical value and narrow M_w/M_n. The photocuring conditions were optimized, and the addition of 10 wt % of poly(ethylene glycol) diacrylate was effective to attain sufficient crosslinking. The photocuring reaction of the end‐functionalized poly(PPS) films cast on silicon wafers was conducted by UV irradiation. The cured poly (PPS)s became insoluble in THF, supporting the sufficient crosslinking. Developing of a cured polymer yielded a negative photoresist pattern. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

“Click” coupling between alkyne‐decorated multiwalled carbon nanotubes and reactive PDMA‐PNIPAM micelles

Covalent functionalization of alkyne‐decorated multiwalled carbon nanotubes (MWNTs) with a well‐defined, azide‐derivatized, thermoresponsive diblock copolymer, poly(N,N‐dimethylacrylamide)‐poly(N‐isopropylacrylamide) (PDMA‐PNIPAM) was accomplished by the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition. It was found that this reaction could simultaneously increase the molecular size and bonding density of grafted polymers when PDMA‐PNIPAM micelles were employed in the coupling system. On the other hand, attachment of molecularly dissolved unimers of high‐molecular weight onto the nanotube resulted in low‐graft density. The block copolymer bearing azide groups at the PDMA end was prepared by reversible addition–fragmentation transfer polymerization, which formed micelles with a diameter of ～40 nm at temperatures above its critical micelle temperature. Scanning electron microscopy was utilized to demonstrate that the coupling reaction was successfully carried out between copolymer micelles and alkyne‐bearing MWNTs. FTIR spectroscopy was utilized to follow the introduction and consumption of alkyne groups on the MWNTs. Thermogravimetric analysis indicated that the functionalized MWNTs consisted of about 45% polymer. Transmission electron microscopy was utilized to image polymer‐functionalized MWNTs, showing relatively uniform polymer coatings present on the surface of nanotubes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7187–7199, 2008     

Novel diblock copolymer‐grafted multiwalled carbon nanotubes via a combination of living and controlled/living surface polymerizations

Diels–Alder cycloaddition reactions were used to functionalize multiwalled carbon nanotubes (MWNTs) with 1‐benzocylcobutene‐1′‐phenylethylene (BCB‐PE) or 4‐hydroxyethylbenzocyclobutene (BCB‐EO). The covalent functionalization of the nanotubes with these initiator precursors was verified by FTIR and thermogravimetric analysis (TGA). After appropriate transformations/additions, the functionalized MWNTs were used for surface initiated anionic and ring opening polymerizations of ethylene oxide and ε‐caprolactone (ε‐CL), respectively. The OH‐end groups were transformed to isopropylbromide groups by reaction with 2‐bromoisobutyryl bromide, for subsequent atom transfer radical polymerization of styrene or 2‐dimethylaminoethyl methacrylate to afford the final diblock copolymers. ¹H NMR, differential scanning calorimetry (DSC), TGA, and transmission electron microscopy (TEM) were used for the characterization of the nanocomposite materials. TEM images showed the presence of a polymer layer around the MWNTs as well as the dissociation of MWNT bundles. Consequently, this general methodology, employing combinations of different polymerization techniques, increases the diversity of diblocks that can be grafted from MWNTs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1104–1112, 2010     

Poly(lactic acid) composites with poly(lactic acid)‐modified carbon nanotubes

This work reports the study of the effect of chemical functionalization of carbon nanotubes on their dispersion in poly(lactic acid). The nanotubes were functionalized by the 1,3‐dipolar cycloaddition reaction, generating pyrrolidine groups at the nanotube surface. Further reaction of the pyrrolidine groups with poly(lactic acid) was studied in solution and in the polymer melt. The former involved refluxing the nanotubes in a dimethylformamide/polymer solution; the latter was carried out by direct melt mixing in a microcompounder. The carbon nanotubes collected after each process were characterized by thermogravimetry and by X‐ray photoelectron spectroscopy, showing evidence of polymer bonded to the nanotube surface only when the reaction was carried out in the polymer melt. The composites with polymer modified nanotubes present smaller average agglomerate area and a narrower agglomerate area distribution. In addition, they show improved tensile properties at low CNT concentration and present lower electrical resistivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3740–3750     

Synthesis of poly(vinylidene fluoride)‐b‐poly(styrene sulfonate) block copolymers by controlled radical polymerizations

Block copolymers based on poly(vinylidene fluoride), PVDF, and a series of poly(aromatic sulfonate) sequences were synthesized from controlled radical polymerizations (CRPs). According to the aromatic monomers, appropriate techniques of CRP were chosen: either iodine transfer polymerization (ITP) or atom transfer radical polymerization (ATRP) from PVDF‐I macromolecular chain transfer agents (CTAs) or PVDF‐CCl₃ macroinitiator, respectively. These precursors were produced either by ITP of VDF with C₆F₁₃I or by radical telomerization of VDF with chloroform, respectively. Poly(vinylidene fluoride)‐b‐poly(sodium styrene sulfonate), PVDF‐b‐PSSS, block copolymers were produced from both techniques via a direct polymerization of sodium styrene sulfonate (SSS) monomer or an indirect way with the use of styrene sulfonate ethyl ester (SSE) as a protected monomer. Although the reaction led to block copolymers, the kinetics of ITP of SSS showed that PVDF‐I macromolecular CTAs were not totally efficient because a limitation of the CTA consumption (56%) was observed. This was probably explained by both the low activity of the CTA (that contained inefficient PVDF‐CF₂CH₂? I) and a fast propagation rate of the monomer. That behavior was also noted in the ITP of SSE. On the other hand, ATRP of SSS initiated by PVDF‐CCl₃ was more controlled up to 50% of conversion leading to PVDF‐b‐PSSS block copolymer with an average number molar mass of 6000 g·mol^?1. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Phase separation of polymer‐functionalized SWNTs within a PMMA/polystyrene blend

Phase separation of polystyrene (PS) and poly(methyl methacrylate) (PMMA) blends was used as a means to segregate PS‐ or PMMA‐functionalized single‐walled carbon nanotubes (SWNTs) in thin films. Dilute solutions (5 wt % in THF) of 1:1 PS/PMMA blends containing the functionalized nanotubes were spin cast and annealed at 180 °C for 12 h. Two different polymer molecular weights were used (M_n = 8000 or M_n = 22,000), and were of approximately equivalent molecular weight to those attached to the surface of the nanotubes. Nanotube functionalization was accomplished using the Cu(I)‐catalyzed [3 + 2] Huisgen cycloaddition, in which alkyne‐decorated nanotubes were coupled with azide‐terminated polymers, resulting in polymer‐SWNT conjugates that were soluble in THF. Characterization of the annealed films by scanning Raman spectroscopy, which utilized the unique Raman fingerprint of carbon nanotubes, enabled accurate mapping of the functionalized SWNTs within the films relative to the two phase‐separated polymers. It was found that nanotube localization within the phase‐separated polymer films was influenced by the type of polymer attached to the nanotube surface, as well as its molecular weight. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 450–458, 2009     

New approaches to hyperbranched poly(4‐chloromethylstyrene) and introduction of various functional end groups by polymer‐analogous reactions

A facile way for the synthesis of hyperbranched poly(4‐chloromethylstyrene) [P(4‐CMS)] with adjustable molar mass by classic atom transfer radical polymerization (ATRP) and mechanistically similar procedures is presented. Subsequently, the chlorine functional groups have been modified to obtain polymers with different polarities. On the one hand, the polymer was end‐capped with unpolar groups (e.g., methyl, phenol ether) to obtain chemically inert substances. On the other hand, more complex functional groups have been introduced through azide groups by 1,3‐dipolar cycloaddition reaction (“click chemistry”). Furthermore, a method for the introduction of ester groups under mild conditions using cesium carboxylates is presented, which also allowed the preparation of so‐called hyperstars by attaching COOH functionalized polystyrene chains onto the P(4‐CMS) as core molecule. All these reactions were carried out in high or very high yields. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2224–2235, 2010     

Synthesis,characterization, and star polymer assembly of boronic acid end‐functionalized polycaprolactone

Boronic acid end‐functionalized polycaprolactone (PCL) polymers were synthesized by ring‐opening polymerization using a pinacol boronate ester‐containing (Bpin) initiator. The polymerization provides access to boron‐terminated polymers (i.e. Bpin‐PCL‐OH) with narrow molecular weight distributions (PDI = 1.09). Postsynthetic manipulation of the polymer's terminal hydroxyl group by copper‐catalyzed azide‐alkyne cycloaddition chemistry provides a series of bis end‐functionalized polymers with significant structural diversity at the termini. Deprotection of the boronate ester end group was accomplished with an acidic solid phase DOWEX resin. The boronate ester deprotection methodology does not result in hydrolysis of the polymeric backbone. The boronic acid‐tipped polymers were converted into star polymer assemblies using thermal dehydration and ligand‐facilitated trimerization. Thermal dehydration of (HO)₂B‐PCL‐OAc to the corresponding boroxine‐based star polymer assembly was inefficient and lead to degradation products. Ligand‐facilitated trimerization using either pyridine or 7‐azaindole as the Lewis base was efficient and mild. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of azide‐functionalized nanoparticles by microemulsion polymerization and surface modification by click chemistry in aqueous medium

Stable translucent aqueous suspensions of azide‐functionalized cross‐linked nanoparticles (NPs), with diameters in the 15–20 nm range, were prepared using two synthetic approaches. Copolymerization of azidomethylstyrene (VBN₃), styrene, and divinylbenzene in various oil‐in‐water microemulsions led to NPs with modulable azide contents (0.53–0.78 mmol/g) and surface over volume distributions. Surface modifications of reactive NPs bearing chlorobenzyl groups, produced by microemulsion copolymerization of vinylbenzylchloride, with sodium azide led to azido‐coated NPs with high densities of peripheral groups (0.13–0.45 mmol/g). It is shown that the nature of the surfactant used for the preparation of the microemulsion has an impact on the incorporation of VBN₃ in the polymer particles as well as on the surface reaction yield. The azide‐functionalized NPs were used as clickable polymeric scaffolds for the grafting of sparingly water‐soluble dansyl and fluorescein derivatives through copper(I)‐catalyzed azide‐alkyne cycloaddition in water in the presence of surfactants as solubilizing agents to produce fluorescent NPs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Norbornene derivatives from a metal‐free,strain‐promoted cycloaddition reaction: New building blocks for ring‐opening metathesis polymerization reactions

The preparation of new ring opening metathesis polymerization (ROMP) monomers using a 1,3‐dipolar cycloaddition between aryl azides and norbornadiene is described. Various norbornenetriazolines, obtained through a solvent‐and catalyst‐free reaction, can subsequently be incorporated into polymer backbones through ROMP reactions. Furthermore, thermal decomposition of the triazoline moiety can allow for further polymer functionalization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2357–2362     

Versatile ω‐end group functionalization of RAFT polymers using functional methane thiosulfonates

Five different polymers, poly[methyl methacrylate] (PMMA), poly[lauryl methacrylate] (PLMA), poly[diethylene glycol methacrylate] (PDEGMA), poly[N‐isopropylacrylamide] (PNIPA), and poly[styrene] (PS) prepared by the RAFT process and thus terminated with dithioesters were aminolyzed in the presence of S‐3‐butynyl methane thiosulfonate (MTS), which was synthesized in two steps. Analysis of the polymers by 2D NMR, UV–vis absorbance, and gel permeation chromatography revealed them to quantitatively carry acetylene end groups connected with disulfide bridges, indicating that functional MTS reagents can be employed for end group functionalization of RAFT polymers. This versatile method is of advantage compared with conjugations with functional maleimides, where isolation of terminal thiols is often required but inexpedient for poly[(meth)acrylates] because their terminal thiols may undergo backbiting and thus avoid conjugation. The acetylene‐terminated polymers were bound to an azide functionalized glass surface in a Cu(I) catalyzed cycloaddition. The modified surfaces exhibited water contact angles corresponding to the polarity of the attached polymers. In the case of the stimulus responsive polymers PNIPA and PDEGMA, the surfaces showed temperature‐dependent contact angles. The disulfide bond connecting the polymers to the surface could be selectively cleaved and resulted in all surfaces having the same contact angle, independent of the nature of the polymer prior attached to the surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3118–3130, 2009     

Copper(0)‐mediated living radical polymerization of acrylonitrile: SET‐LRP or AGET‐ATRP

Cu(0)‐mediated living radical polymerization was first extended to acrylonitrile (AN) to synthesize polyacrylonitrile with a high molecular weight and a low polydispersity index. This was achieved by using Cu(0)/hexamethylated tris(2‐aminoethyl)amine (Me₆‐TREN) as the catalyst, 2‐bromopropionitrile as the initiator, and dimethyl sulfoxide (DMSO) as the solvent. The reaction was performed under mild reaction conditions at ambient temperature and thus biradical termination reaction was low. The rapid and extensive disproportionation of Cu(I)Br/Me₆‐TREN in DMSO/AN supports a mechanism consistent with a single electron transfer‐living radical polymerization (SET‐LRP) rather than activators generated by electron transfer atom transfer radical polymerization (AGET ATRP). ¹H NMR analysis and chain extension experiment confirm the high chain‐end functionality of the resultant polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Facilitating polymer conjugation via combination of RAFT polymerization and activated ester chemistry

The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via ¹H and ¹³C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Solving the loss of orthogonality during the polyaddition of α‐azide‐ω‐alkyne monomers catalyzed by Cu(PPh3)3Br: Application to the synthesis of high‐molar mass polytriazoles

Polyaddition of an α‐azide‐ω‐alkyne monomer by Cu(PPh₃)₃Br catalyzed 1,3‐dipolar cycloaddition was thoroughly studied as a model system to investigate the orthogonality of this click chemistry process. Indeed, loss of chain‐end functionality and occurrence of side reactions have a tremendous impact on the molar mass of polymers obtained by step growth polymerization. Particularly, SEC, ¹H, and ³¹P NMR experiments have highlighted the occurrence of a Staudinger side‐reaction between azide chain‐ends and PPh₃ from the copper(I) catalyst that dramatically alters M_n of the resulting polytriazoles. A significant enhancement of M_n could be achieved by using an alternative catalyst and optimized experimental conditions, that is, dilution and reaction time. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2470–2476, 2010     

Hypervalent iodine‐mediated direct azidation of polystyrene and consecutive click‐type functionalization

Polystyrene was directly azidated in 1,2‐dichloroethane or chlorobenzene using a combination of trimethylsilyl azide and a hypervalent iodine (III) compound, (diacetoxyiodo)benzene. 2D NMR HMBC experiments indicated that the azide groups were attached to the polymer backbone and also possibly to the aromatic pendant groups. The amount of introduced azide groups was estimated by semi‐quantitative IR spectroscopy and elemental analysis. Approximately 1 in every 11 styrene units could be modified by using a ratio of hypervalent iodine compound to trimethylsilyl azide to styrene units of 1:2.1:1 at 0 °C for 4 h followed by heating to 50 °C for 2 h in chlorobenzene. The azidated polymers were further used as backbone precursors in the synthesis of polymeric brushes with hydrophilic side chains via a copper‐catalyzed click grafting‐onto reaction with poly(ethylene oxide) monomethyl ether 4‐pentynoate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 966–974, 2010     

Degradable star polymers with high “click” functionality

Degradable polyester‐based star polymers with a high level of functionality in the arms were synthesized via the “arms first” approach using an acetylene‐functional block copolymer macroinitiator. This was achieved by using 2‐hydroxyethyl 2′‐methyl‐2′‐bromopropionate to initiate the ring‐opening polymerization (ROP) of caprolactone monomer followed by an atom transfer radical polymerization (ATRP) of a protected acetylene monomer, (trimethylsilyl)propargyl methacrylate. The hydroxyl end‐group of the resulting block copolymer macroinitiator was subsequently crosslinked under ROP conditions using a bislactone monomer, 4,4′‐bioxepanyl‐7,7′‐dione, to generate a degradable core crosslinked star (CCS) polymer with protected acetylene groups in the corona. The trimethylsilyl‐protecting groups were removed to generate a CCS polymer with an average of 1850 pendent acetylene groups located in the outer block segment of the arms. The increased functionality of this CCS polymer was demonstrated by attaching azide‐functionalized linear polystyrene via a copper (I)‐catalyzed cycloaddition reaction between the azide and acetylene groups. This resulted in a CCS polymer with “brush‐like” arm structures, the grafted segment of which could be liberated via hydrolysis of the polyester star structure to generate molecular brushes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1485–1498, 2009     

Controlled grafting from poly(vinylidene fluoride) films by surface‐initiated reversible addition–fragmentation chain transfer polymerization

A reversible addition–fragmentation chain transfer (RAFT) polymerization technique was applied to graft polymerize brushes of poly(methyl methacrylate) (PMMA) and poly(poly(ethylene glycol) monomethacrylate) (PPEGMA) from poly(vinylidene fluoride) (PVDF) surfaces. PVDF surfaces were exposed to aqueous LiOH, followed by successive reductions with NaBH₄ and DIBAL‐H to obtain hydroxyl functionality. Azo‐functionalities, as surface initiators for grafting, were immobilized on the PVDF surfaces by esterification of 4,4′‐azobis(4‐cyanopentanoic acid) and the surface hydroxyl groups. The chemical composition and surface topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy, attenuated total reflectance‐FTIR spectroscopy, and atomic force microscopy. Kinetics studies revealed a linear increase in the graft concentration of PMMA and PPEGMA with the reaction time, indicating that the chain growth from the surface was consistent with a “controlled” or “living” process. The living chain ends were used as the macroinitiator for the synthesis of diblock copolymer brushes. Water contact angles on PVDF films were reduced by surface grafting of PEGMA and MMA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3071–3082, 2006     

Investigation of proton conductivity of anhydrous proton exchange membranes prepared via grafting vinyltriazole onto alkaline‐treated PVDF

This work uses a simple “grafting through” approach in the preparation of anhydrous poly(vinylidene fluoride) (PVDF)‐g‐PVTri polymer electrolyte membranes (PEMs). Alkaline‐treated PVDF was used as a macromolecule in conjunction with vinyltriazole in the graft copolymerization. The obtained polymer was subsequently doped with triflic acid (TA) at different stoichiometric ratios with respect to triazole units and the anhydrous PEMs (PVDF‐g‐PVTri‐(TA)_x) were prepared. All samples were characterized by FTIR and ¹H NMR. The composition of PVDF‐g‐PVTri was determined by energy dispersive spectroscopy. Thermal properties of the membranes were examined by thermogravimetric analysis and differential scanning calorimetry. The surface roughness and morphology of the membranes were studied using atomic force microscopy, X‐ray diffraction, and scanning electron microscopy. PVDF‐g‐PVTri‐(TA)₃ (C3‐TA₃) with a degree of grafting of 47.22% showed a maximum proton conductivity of 0.09 S cm^?1 at 150 °C and anhydrous conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1885–1897     

Surface modification of multiwall carbon nanotubes and its effect on mechanical and through‐plane electrical resistivity of PEMFC bipolar plate nanocomposites

In this work, we showed how the functionalization of multiwall carbon nanotubes (MWCNT) by nitric acid (HNO₃) and their predispersion into poly (butylene terephthalate) (PBT) improved the through‐plane electrical conductivity and mechanical properties of co‐continuous morphology polyvinylidene fluoride (PVDF)/poly (ethylene terephthalate) (PET)/carbon black (CB)/graphite (GR)/MWCNT nanocomposites. First, when MWCNT were functionalized with HNO₃ then premixed with PBT, they showed no aggregations inside the PBT matrix due to their improved interfacial interactions and chemical compatibility with the PBT matrix. Then, when PBT/(HNO₃‐functionalized MWCNT) mixture was added in small quantities to (PET/PVDF)/(CB/GR) composites, it decreased significantly their through‐plane resistivity and enhanced their impact and flexural properties. Its synergistic effect also led to the best proton exchange membrane fuel cell bipolar plate prototypes (smoother surface, without any cracks).