Copolyfluorenes containing bridged triphenylamine or triphenylamine: Synthesis,characterization, and optoelectronic properties

A novel aryl‐bridged triphenylamine derivative, 7‐t‐butyl‐5,5,9,9‐tetraaryl‐13b‐aza‐naphtho[3,2,1‐de]anthracene (ABTPA) was designed and synthesized. The alternating copolymers of ABTPA/dihexylfluorene ( P1 ) and triphenylamine (TPA)/dihexylfluorene ( P2 ) were synthesized by Suzuki coupling reaction. P1 shows excellent thermal stability with a decomposition temperature of 440 °C and a glass‐transition temperature of 326 °C. The HOMO energy levels of the two polymers are very close (?5.15 eV for P1 and ?5.13 eV for P2 ). The maximum absorption peak of P1 is red shifted by 23 nm with respect to P2 , because the incorporation of ABTPA units into the PF backbone enhances the electronic conjugation degree compared with the case of TPA units. The rigidity and the steric hindrance of the ABTPA in P1 result in a small Stokes shift and almost the same emission spectra of P1 between its film and solution. A PLED with simple configurations of ITO/ P1 /TNS (tetranaphthalen‐2‐yl‐silane)/Alq₃ (tris(8‐hydroxyquinolinolato)aluminum)/Al emits a blue light with emission peak at 436 nm, and exhibits a maximum current efficiency of 1.89 cd/A and a maximum luminance of 4183 cd/m², which is superior to the device with P2 as emissive layer under the identical conditions. These results indicate that ABTPA unit could be a very promising candidate to replace TPA unit and find widely application in organic/polymeric optoelectronic materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3651–3661, 2009     

Hyperbranched luminescent polyfluorenes containing aromatic triazole branching units

Using a new aromatic 1,2,4‐triazole branching monomer (4.8–13.3 mol %), three hyperbranched polyfluorenes ( P2 – P4 ) were synthesized by the Suzuki coupling reaction to investigate the structural effect on optoelectronic properties. Poly(9,9‐dihexylfluorene) ( P1 ) was also prepared for comparative investigation. Their weight‐average molecular weights and polydispersity indices are in the range of 1.16 × 10⁴ to 5.9 × 10⁴ and 1.49–2.25, respectively. Optical properties, both in solution and film state, were investigated using absorption and photoluminescence (PL) spectra. In film state, the absorption and PL spectra peaked at 377–392 and 424–425 nm, respectively, blue‐shift with increasing triazole concentration. Furthermore, a linear relationship between 1/λ_max,abs and 1/(1 ? n_triazole) is correlated (n: molar fraction), indicating a smooth decrease in conjugation length by incorporation of the branch unit. The P4 containing 13.3 mol % triazole reveals stable blue emission even at 150 °C (in air). The HOMO and LUMO levels of P2 – P4 , estimated from cyclic voltammograms, are ?5.69, ?5.73, ?5.78 eV and ?2.63, ?2.64, ?2.63 eV, respectively. The maximal brightness (current efficiency) of the electroluminescent devices (ITO/PEDOT:PSS/ P2 – P4 /Ca/Al) improves from 828 cd/m² (0.19 cd/A) to 2054 cd/m² (0.46 cd/A) with increasing triazole concentration. The results suggest that incorporation of aromatic 1,2,4‐triazole branch units is an effective way to improve annealing stability and EL performance of polyfluorenes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4465–4476, 2007     

Synthesis and electroluminescence properties of white‐light single polyfluorenes with high‐molecular weight by click reaction

We reported a new way to synthesize single‐chain white light‐emitting polyfluorene (WPF) with an increased molecular weight using azide‐alkyne click reaction. Four basic polymers with specific end‐capping, which exhibited high‐glass transition temperatures (T_g > 100 °C) and excellent thermal stability, were used as foundations of the WPF's synthesis; a blue‐light polymer (PFB2) end‐capped with azide groups can easily react with acetylene end‐capped polymers (PFB1, PFG1, and PFR1, which are emitting blue‐, green‐ and red‐light, respectively) to form triazole‐ring linkages in polar solvents such as N,N‐dimethylforamide/toluene co‐solvent at moderate temperature of 100 °C, even without metal‐catalyst. Several WPFs that consist of these four basic polymers in certain ratios were derived, and the polymer light‐emitting diode device based on the high‐molecular weight WPF was achieved and demonstrated a maximum brightness of 7551 cd/m² (at 12.5 V) and a maximum yield of 5.5 cd/A with Commission Internationale de l'Eclairage coordinates of (0.30, 0.33) using fine‐tuned WPF5 as emitting material. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and optoelectronic properties of hyperbranched polyfluorenes containing pendant benzylether dendrons

Linear polyfluorenes with low generation of side benzylether dendrons ( PLG0 , PLG1 ) and hyperbranched polyfluorenes with 1,3,5‐benzene branch unit ( PHG0 and PHG1 ) were prepared by the Suzuki coupling reaction to investigate the structural effect on optoelectronic properties. Their optical properties, both in solution and film state, were investigated using absorption and photoluminescence (PL) spectra. The excimer emission of polyfluorene at about 530 nm, induced by thermal annealing, was completely suppressed by the hyperbranched structure, but the suppression was not obvious by the side benzylether dendrons. The optoelectronic performance of the EL devices (ITO/PEDOT:PSS/polymer/Ca/Al) was strongly dependent upon chemical structures of the emitting polyfluorenes. The hyperbranched PHG0 with zero generation of benzylether side groups revealed the best device performance, with maximal luminance and maximal luminance efficiency of 2350 cd/m² and 0.33 cd/A, respectively. The results suggest that incorporation of branch units with low generation of benzylether dendrons is an effective way to improve annealing stability and EL performance of the polyfluorenes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5945–5958, 2008     

Synthesis and characterization of hyperbranched polyfluorenes containing triarylpyrazoline cores towards efficient blue light‐emitting diodes

New series of hyperbranched polyfluorenes containing triarylpyrazoline cores, PFZ10 , PFZ20 , PFNZ10 , and PFNZ20 , have been synthesized according to the “A₂ + A′₂ + B₃” Suzuki coupling method. The structures and property of the monomers and conjugated polymers were characterized by elemental analysis, gel permeation chromatography, cyclic voltammetry, thermogravimetric analysis, differential scanning calorimetry, and UV–visible absorption, ¹H NMR, ¹³C NMR, and photoluminescence spectroscopies. All these polymers exhibited good solubility in common organic solvents and good thermal stability. The long‐wavelength emission of polyfluorenes had been effectively reduced in these hyperbranched polymers. Standard polymer light emitting devices (PLEDs) from PFZ10 , PFZ20 , PFNZ10 , and PFNZ20 , with the configuration of ITO/PEDOT/polymer/TPBI/Alq₃/Mg:Ag, exhibited good electroluminescence (EL) properties The PLED based on PFNZ10 emitted pure blue light with a low turn‐on voltage of 5.3 V and a high EL efficiency of about 1.93%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5296–5307, 2007     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Synthesis and optical and electrochemical properties of copolymers containing 9,9‐dihexylfluorene and 9‐dimethylaminopropylcarbazole chromophores

Soluble and well‐defined 9,9‐dihexylfluorene and 9‐dimethylaminopropylcarbazole based copolymers PFCN and 5PFCN have been prepared by Suzuki coupling polymerization. For comparison, alternate copolymer of 9,9‐dihexylfluorene and 9‐hexylcarbazole (PFC) was also prepared with the same method. Furthermore, alternate copolymer of 9,9‐dihexylfluorene and 9‐dimethylethylammoniumpropylcarbazole (PFCNE) was prepared from PFCN by the ethylation of its dimethylaminopropyl groups with bromoethane. These copolymers were soluble in organic solvents and showed high glass‐transition temperatures (75–160 °C). The optimized architecture of PFCN from a simulation was a spiral, which was different from the linear structure of poly(9,9‐dihexylfluorene) (PFO). Thermogravimetric analysis showed that the residual weights of 5PFCN, PFCN, PFC, and PFCNE at 800 °C were all greater then 50%, whereas PFO showed complete thermal decomposition. Both the absorption and photoluminescence emission peaks of these copolymers showed blueshifts after the introduction of the carbazole units because of reduced conjugation. Moreover, the introduction of 9‐hexylcarbazole and 9‐dimethylamionpropylcarbazole moieties into copolymers PFC and PFCN, respectively, effectively prevented the excimer formation of PFO. According to cyclic voltammetry results, PFCNE containing quaternary amino pendant groups exhibited the most stable reduction–oxidation cycles. The turn‐on electric fields of their electroluminescence devices decreased with increasing carbazole content because of the more balanced carrier injection. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3882–3895, 2006     

Electroluminescent copolymers based on dihexylfluorene and 2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile units

A series of statistical copolymers (poly[(9,9‐di‐n‐hexylfluorene)‐co‐2‐{2,6‐bis‐[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were synthesized by the Suzuki coupling reaction. The copolymers showed absorption bands at 379 and 483–489 nm, which were attributed to the oligofluorene segments and the segments containing 2‐[2,6‐bis(2‐{4‐[(4‐bromophenyl)phenylamino]phenyl}vinyl)pyran‐4‐ylidene]malononitrile ( 3 ), respectively. The absorption band around 483–489 nm increased with the feed ratio of 3 . The photoluminescence (PL) spectra of the copolymers showed emission bands at 420 and 573–620 nm. As the feed ratio of 3 increased, the PL emission in the longer wavelength region redshifted, and the intensity increased as well. The electroluminescence (EL) spectrum of the copolymers showed a very weak emission at 420 nm. The PL and EL emission colors redshifted dramatically with the increase in the feed ratio of 3 . The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the model compound (2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were determined to be ?5.34 and ?3.14 eV, respectively. It was concluded that energy transfer took place from the oligofluorene blocks to the segments containing 3 and that direct charge trapping occurred in the segments containing 3 during the EL operation. The Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of the copolymer (x = 0.63, y = 0.37) containing 10 mol % 3 were very close to those (x = 0.67, y = 0.33) for National Television System Committee (NTSC) red with a maximum photometric power efficiency of 0.27 cd/A. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3729–3737, 2006     

Synthesis,characterization, and electroluminescence properties of poly(fluorenevinylene benzobisthiazoles)

A series of vinylene‐linked copolymers based on electron‐deficient benzobisthiazole and electron‐rich fluorene moieties were synthesized via Horner–Wadsworth–Emmons polymerization. Three different polymers P1 , P2 , and P3 , were prepared bearing octyl, 3,7‐dimethyloctyl, and 2‐(2‐ethoxy)ethoxyethyl side chains, respectively. The polymers all possessed moderate molecular weights, good solubility in aprotic organic solvents, and high fluorescence quantum efficiencies in dilute solutions. P2 , which bore branched 3,7‐dimethyloctyl side chains, exhibited better solubility than the other polymers, but also exhibited the lowest thermal decomposition temperature of all polymers. Overall, the impact of the side chains on the polymers optical properties in solution was negligible as all three polymers gave similar absorption and emission spectra in both solution and film. Guest‐host light‐emitting diodes using dilute blends of the polymers in a poly(N‐vinylcarbazole) host gave blue‐green emission with P2 exhibiting the highest luminous efficiency, 0.61 Cd/A at ～500 nm. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Copolyfluorenes containing pendant bipolar carbazole and 1,2,4‐triazole groups: Synthesis,characterization, and optoelectronic applications

Three novel copolyfluorenes ( P1 ‐ P3 ) containing pendant bipolar groups (2.5–7.7 mol %), directly linked hole‐transporting carbazole and electron‐transporting aromatic 1,2,4‐triazole, were synthesized by the Suzuki coupling reaction and applied to enhance emission efficiency of polymer light‐emitting diodes based on conventional MEH‐PPV. The bipolar groups not only suppress undesirable green emission of polyfluorene under thermal annealing, but also promote electron‐ and hole‐affinity of the resulting copolyfluorenes. Blending the bipolar copolyfluorenes with MEH‐PPV results in significant enhancement of device performance [ITO/PEDOT:PSS/MEH‐PPV+ P1 , P2 or P3 /Ca(50 nm)/Al(100 nm)]. The maximum luminance and luminance efficiency were enhanced from 3230 cd/m² and 0.29 cd/A of MEH‐PPV‐only device to 15,690 cd/m² and 0.81 cd/A (blend device with MEH‐PPV/ P3 = 94/6 containing about 0.46 wt % of pendant bipolar residues), respectively. Our results demonstrate the efficacy of the bipolar copolyfluorenes in enhancing emission efficiency of MEH‐PPV. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of a novel electroluminescent polymer based on a phenoxazine derivative

We report the preparation of a new electroluminescent polymer by the oxidative coupling copolymerization of N‐(4‐n‐butylphenyl)phenoxazine and 9,9‐di‐n‐butylfluorene with ferric(III) chloride. The reaction yields soluble polymers with a weight‐average molecular weight as high as 9000. The reactivity has been studied with respect to the reaction time, temperature, and feed ratio of the comonomers. Under optimum conditions, a copolymer with a 50% comonomer incorporation ratio can be obtained in a 75% yield. The polymers have been characterized with differential scanning calorimetry, cyclic voltammetry, and optical spectroscopy. A simple single‐layer light‐emitting‐diode device of an indium tin oxide/polymer/Mg–Ag structure shows a luminance of 200 cd/m² at an 18‐V operating voltage. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4338–4345, 2006     

Silole‐containing poly(diphenylacetylene): Synthesis,characterization, and light emission

A disubstituted polyacetylene consisting of a poly(diphenylacetylene) backbone and a 1,2,3,4,5‐pentaphenylsilole (SiC₄Ph₅) pendant, that is, ? {(C₆H₅) C?C [C₆H₄O(CH₂)₃C?CSiC₄Ph₅]}_n? (PS3DPA), was synthesized, and its light emission from both the backbone and the pendant was evaluated. The polymerization of C₆H₅C?CC₆H₄O(CH₂)₃C?CSiC₄Ph₅ with two ethynyl groups was effected with WCl₆–Ph₄Sn as the catalyst. The structure and properties of PS3DPA were characterized and evaluated by IR, UV, NMR, thermogravimetric analysis, differential scanning calorimetry, photoluminescence, and electroluminescence analyses. The ethynyl group of the diphenylacetylene moiety was polymerized exclusively, giving a soluble PS3DPA. The chloroform solution of PS3DPA showed a backbone emission that peaked at 522 nm, whereas the silole pendant was nonradiative at room temperature. The polymer did not show the aggregation‐induced emission phenomenon, probably because the silole clusters were difficult to form when the polymer chains aggregated because of the very high rigidity of the main chain. Intramolecular rotations of the phenyl groups of the silole moieties were responsible for the nonradiative decay of the silole chromophore. The intramolecular rotations, however, could be largely restricted in a cooling process of the polymer solution, showing cooling‐enhanced emission. The silole emission became dominant at lower temperatures. A multilayer electroluminescence device based on PS3DPA emitted a green light that peaked at 512 nm. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2487–2498, 2006     

Synthesis of new polyfluorene copolymers with a comonomer containing triphenylamine units and their applications in white‐light‐emitting diodes

Novel conjugated polyfluorene copolymers, poly[9,9‐dihexylfluorene‐2,7‐diyl‐co‐(2,5‐bis(4′‐diphenylaminostyryl)‐phenylene‐1,4‐diyl)]s (PGs), have been synthesized by nickel(0)‐mediated polymerization from 2,7‐dibromo‐9,9‐dihexylfluorene and 1,4′‐dibromo‐2,5‐bis(4‐diphenylaminostyryl)benzene with various molar ratios of the monomers. Because of the incorporation of triphenylamine (TPA) moieties, PGs exhibit much higher HOMO levels than the corresponding polyfluorene homopolymers and are able to facilitate hole injection into the polymer layer from the anode electrode in light‐emitting diodes. Conventional polymeric light‐emitting devices with the configuration ITO/PEDOT:PSS/polymer/Ca/Al have been fabricated. A light‐emitting device produced with one of the PG copolymers (PG10) as the emitting layer exhibited a voltage‐independent and stable bluish‐green emission with color coordinates of (0.22, 0.42) at 5 V. The maximum brightness and current efficiency of the PG10 device were 3370 cd/m² (at 9.6 V) and 0.6 cd/A, respectively. To realize a white polymeric light‐emitting diode, PG10 as the host material was blended with 1.0 wt % of a red‐light‐emitting polymer, poly[9,9‐dioctylfluorene‐2,7‐diyl‐alt‐2,5‐bis(2‐thienyl‐2‐cyanovinyl)‐1‐(2′‐ethylhexyloxy)‐4‐methoxybenzene‐5′,5′‐diyl] (PFR4‐S), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV). The device based on PG10:PFR4‐S showed an almost perfect pure white electroluminescence emission, with Commission Internationale de l'Eclairage (CIE) coordinates of (0.33, 0.36) at 8 V; for the PG10:MEH‐PPV device, the CIE coordinates at this voltage were (0.30, 0.40) with a maximum brightness of 1930 cd/m². Moreover, the white‐light emission from the PG10:PFR4‐S device was stable even at different driving voltages and had CIE coordinates of (0.34, 0.36) at 6 V and (0.31, 0.35) at 10 V. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1199–1209, 2007     

Simple Silole‐Containing Polyfluorene for White Electroluminescence with Simultaneous Blue,Green, and Red Emission

Novel conjugated silole‐containing polyfluorenes, with green‐ and red‐emissive siloles on the backbone of the blue‐emissive polyfluorene are synthesized for white light electroluminescence (EL) from a single polymer with simultaneous red, green, and blue (RGB) emission. The CIE coordinates (0.33, 0.36) of the white light EL spectra are very close to that for pure white light (0.33, 0.33). The EL spectra are also quite stable at different applied voltages or brightness. The relative intensities for the three RGB peaks, at 450, 505, and 574 nm, were 0.94, 1, and 0.97, respectively, which demonstrates a balanced simultaneous RGB emission. A maximum luminous efficiency of 2.03 cd · A⁻¹ for a brightness of 344 cd · m⁻², and a luminous efficiency of 1.86 cd · A⁻¹ for a more practical brightness of 2 703 cd · m⁻², were achieved.

     

Synthesis and optical and electrochemical properties of copolymers consisting of 9,9‐dihexylfluorene and aromatic triazole chromophores

Aromatic triazole chromophores were incorporated into polyfluorene in an attempt to increase electron affinity, to promote emission efficiency, and to diminish excimer formation. Poly(9,9‐dihexylfluorene) ( P1 ) and new copolymers with aromatic triazoles ( P2 – P4 ) were prepared by Suzuki coupling polymerization. In P2 , the aromatic triazole (3.8 mol %) was attached exclusively as terminal groups, whereas P3 and P4 were main‐chain copolymers containing 3.9 and 10.3 mol % aromatic triazole chromophores, respectively. The copolymers were soluble in common organic solvents and showed high decomposition temperatures (437–458 °C). The twisted structure between the triazole and fluorene increased the emission efficiency and effectively prevented excimer formation in P2 – P4 . After the introduction of the triazole units, the absorption spectra showed a blueshift (from 388 to 381 nm in chloroform) due to confined conjugation, but the photoluminescence spectra remained almost the same (417–418 nm); this was attributed to oligofluorene segments. No emission of triazole fluorophores was observed because of efficient energy transfer from the triazole to oligofluorene segments. However, incomplete energy transfer was observed in CH₃COOH. The optical stability upon thermal annealing was also improved by the incorporation of aromatic triazole segments. From cyclic voltammetry results, P2 – P4 , containing triazole groups, showed greater electron affinity (lowest unoccupied molecular orbital level = ?2.67 to ?2.71 eV) than P1 (?2.52 eV). Electroluminescence devices of P1 – P4 all exhibited excimer emissions (483–521 nm), which could also be diminished by the introduction of aromatic triazole chromophores. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 136–146, 2007     

Synthesis and characterization of novel germanium‐containing poly(p‐phenylenevinylene) derivatives

Novel blue‐emitting germanium‐containing poly(p‐phenylenevinylene) (PPV) derivatives with well‐defined conjugation lengths were synthesized via Wittig‐condensation polymerizations. The polymers can be color‐tuned by the introduction of various chromophores into the PPV‐based polymer backbones. The photoluminescence (PL) spectra of the polymers, GePVK (containing carbazole moieties), GeMEH (containing dialkoxybenzene moieties), and GePTH (containing phenothiazine moieties), were found to exhibit blue, greenish blue, and green emissions, respectively. GePTH produces more red‐shifted emission than GeMEH and GEPVK, resulting in green emission, and the solution and solid state PL spectra of GePVK consist of almost blue emission. The electroluminescence spectra of GeMEH and GePTH contain yellowy green and yellow colors, respectively. Interestingly, GePVK exhibits white emission with CIE coordinates of (0.33, 0.37) due to electroplex emission in the light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 979–988, 2008     

Synthesis and characterization of electrophosphorescent jacketed conjugated polymers

A monomer containing bent side chains with oxadiazole unit was synthesized. And it was copolymerized with polyfluorene at different ratios. The photophysical and electrochemical properties of the copolymers were characterized. The results show that the introduction of the oxidiazole‐containing side chains into the polymer reduces the lowest unoccupied molecular orbital level. And the steric hindrance of the side groups can effectively suppress the aggregation of the polymer backbones. Electroluminescent devices were fabricated with a configuration of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene (PEDOT):PSS/Sample/Ca/Al. All of the devices emit blue light. The device of the copolymer PFOXD50 shows the best performance with the maximum luminance of 1033 cd/m² and the maximum current efficiency of 0.29 cd/A. Then a cyclometalated iridium complex monomer (ppy)₂Ir(BrPhPyBr) was copolymerized with PFOXD50 at different ratios. The devices with the same configuration emit orange light. The efficiency generally increases with the increasing Ir content. Among them, the device of the copolymer PFOXDIr7 shows the best performance with the maximum luminance of 846 cd/m² and the maximum current efficiency of 0.61 cd/A. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012