Linear poly(amide triazole)s derived from d‐glucose

The click reaction between azides and alkynes is been increasingly employed in the preparation of polymers. In this article, we describe the synthesis and click polyaddition reaction of a new A‐B‐type amide monomer—prepared from d ‐glucose as renewable resource—containing the alkyne and azide functions. Both Cu(I)‐catalyzed and metal‐free click polymerization methods were used to prepare glucose‐derived poly(amide triazole)s. The resulting polymers had weight‐average molecular weights in the 45,000–129,000 range and were characterized by GPC, IR, and NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be amorphous. Their qualitative solubilities in various solvents and their water sorption have been studied. The poly(amide triazole)s having the alcohol functions protected as methyl ether were water‐soluble. The presence of the amide functions along the polymer chain made these polytriazoles degradable in the presence of sodium deuteroxide. The degradation was monitored by NMR analysis, and the degradation product was characterized by HRMS. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 629–638     

Random multiblock poly(ester amide)s containing poly(L‐lactide) and cycloaliphatic amide segments: Synthesis and biodegradation studies

Novel multiblock poly(ester amide)s containing poly(L ‐lactide) and cycloaliphatic amide segments were synthesized from telechelic oligomer of α,ω‐hydroxyl terminated poly(L ‐lactide), 1,3‐cyclohexylbis(methylamine), and sebacoylchloride by the “two‐step” interfacial polycondensation method. The blocky nature of PEAs was established by FTIR and ¹H NMR spectroscopies. The effect of relative content of ester and amide segments on the crystallization nature of PEAs was investigated by WAXD and DSC analyses. PEAs having lower content of PLLA, PEA 1 and PEA 2, showed a crystallization pattern analogous to polyamides, whereas PEA 3, having higher content of PLLA, showed two crystalline phases characterized by polyester and polyamide segments. Random nature of PEAs was observed from single T_g values. Biodegradation studies using the enzyme lipase from Candida Cylindracea showed higher degradation rate for PEA 3 than that for PEA 1 and PEA 2. FTIR, ¹H NMR, and DSC analyses of the degraded products indicated the involvement of ester linkages in the degradation process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3250–3260, 2006     

Synthesis and properties of stereoregular poly(ester amides) derived from carbohydrates

Two poly(ester amides) containing three methoxy groups stereoregularly attached to the main chain have been prepared by using naturally occurring L -arabinose and D -xylose as the starting materials. The polymers were prepared by the active ester polycondensation method and characterized by elemental analysis, IR, and ¹H- and ¹³C-NMR spectroscopies. Both viscosimetry and GPC were used to estimate the molecular weights. The polymers are hydrophilic, one of them being water soluble, and exhibited moderate optical activity. Thermal and X-ray diffraction studies revealed that they are slightly crystalline and stable up to 250°C under nitrogen. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 67–77, 1998     

Microwave‐assisted TCNE/TCNQ addition to poly(thienyleneethynylene) derivative for construction of donor–acceptor chromophores

The alkyne moieties of poly(3‐hexylthienyleneethynylene) were reacted with tetracyanoethylene or 7,7,8,8‐tetracyanoquinodimethane by microwave irradiation to produce donor–acceptor chromophores in the polymer main chain. The resulting polymers were fully characterized by GPC, ¹H NMR, and IR spectroscopies, and elemental analyses. They were both thermally and chemically stable, as revealed by thermogravimetric analyses and ESR measurements. UV–vis‐NIR spectroscopy revealed charge‐transfer bands in the low‐energy region, and electrochemistry confirmed the narrower band gaps with the elevated HOMO and lower LUMO levels relative to the precursor polymer. To take advantage of these postfunctionalization methods, p‐type doping of the polymers with I₂ was attempted. Room temperature conductivities of the postfunctionalized polymers reached 4.5 × 10^?5 S cm^?1, which was about 10 times greater than that of the precursor polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of hydrogen‐bonded thermotropic liquid crystalline aromatic‐aliphatic poly(ester–amide)s from amido diol

Fifteen highly regular hydrogen‐bonded, novel thermotropic, aromatic‐aliphatic poly(ester–amide)s (PEAs) were synthesized from aliphatic amido diols by melt polycondensation with dimethyl terephthalate and solution polycondensation with terephthaloyl chloride. Intermolecular hydrogen bonds more or less perpendicular to the main‐chain direction induce the formation and stabilization of liquid crystalline property for these PEAs. The structure of these polymers, even in the mesomorphic phase is dominated by hydrogen bonds between the amide–amide and amide–ester groups in adjacent chains. Aliphatic amido diols were synthesized by the aminolysis of γ‐butyrolactone, δ‐valerolactone and ε‐caprolactone with aliphatic diamines containing a number of methylene groups from two to six in isopropanol medium at room temperature. Effects of polarity of the solvent on solution polymerization and effect of catalyst on trans esterification were studied. These polymers were characterized by elemental analysis, FTIR, ¹H NMR, ¹³C NMR, solubility studies, inherent viscosity, DSC, X‐ray diffraction, polarized light microscopy, and TGA. All the melt/solution polycondensed PEAs showed multiple‐phase transitions on heating with second transitions identified as nematic/smectic/spherullitic texture. The mesomorphic properties were studied as a function of their chemical structure by changing alternatively m or n. Odd‐even effect on mesophase transition temperature, isotropization temperature, and crystallinity were studied. The effect of molecular weight and polydispersity on mesophase/isotropization temperature and thermal stability were investigated. It was observed that there exists a competition for crystallinity and liquid crystallinity in these PEAs © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2469–2486, 2000     

Degradable poly(ester triazole)s based on renewable resources

The copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC) click polymerization has been used to obtain novel linear poly(ester triazole)s by reaction of bis‐alkyne having ester linkage and bis‐azido monomers, most of them derived from carbohydrates, such as glucose, arabinose, and erythrose, and therefore coming from natural renewable resources. The resulting polyesters had weight‐average molecular weights in the 11,500–148,000 range and were characterized by GPC, IR, and NMR spectroscopies. Thermal studies revealed them to be amorphous and stable up to 200 °C under nitrogen. Degradation studies showed that they were hydrolytically degradable. These studies were carried out at 50 °C in phosphate buffer solution at pH 7.4, and were monitored by GPC, and NMR spectroscopy. Finally, novel network hydrogels were obtained by crosslinking reaction of the poly(ester triazole) chains with hexamethylene diisocyanate. The water absorption and the kinetic parameters of the networks were studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2481–2493     

Synthesis and characterization of copoly(amide triazole)s derived from d‐Glucose

Copoly(amide triazole)s, abbreviated as PGBM_n, have been prepared by copolymerization of 6‐azido‐6‐deoxy‐2,3,4‐tri‐O‐methyl‐N‐(prop‐2‐yn‐1‐yl)‐d ‐gluconamide and 6‐azido‐6‐deoxy‐2,3,4‐tri‐O‐benzyl‐N‐(prop‐2‐yn‐1‐yl)‐d ‐gluconamide by catalyst‐ and solvent‐free 1,3‐dipolar Huisgen cycloaddition reaction. The resulting copolymers have a diblock or a random distribution of the monomeric units along the polymer chain. Their molecular weights are in the range of 70,000–90,000 and they were characterized by GPC and IR and NMR spectroscopies. Thermal studies revealed them to be amorphous and stable up to 200 °C under nitrogen. Their qualitative solubilities in various solvents and their water sorption have also been investigated. The copolymers are hydrophilic, one of them being water soluble. The in vitro hydrolysis of this copoly(amide triazole) was studied. The degradation study was carried out at 80 °C in buffered solution at pH 10, and was monitored by GPC, and NMR spectroscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 413–421     

Pt‐catalyzed chemical modification of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) with vinylheptaphenylcyclotetrasiloxane

Pt‐catalyzed hydrosilylation between vinylheptaphenylcyclotetrasiloxane and a series of α,ω‐bis(hydrido)polydimethylsiloxanes and copoly(methylhydridosiloxane/dimethylsiloxane) was used to prepare chemically modified materials. These modified polymers were characterized by IR, UV, and ¹H, ¹³C, and ²⁹Si NMR spectroscopy and gel permeation chromatography (GPC). The molecular weights, determined by GPC, UV, and NMR end‐group analysis, showed the anticipated increases. The thermal properties of the polymers were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The crystallinity, determined by DSC, was either reduced or completely eliminated for the modified polymers. The thermal stabilities, measured in both air and nitrogen by TGA, were slightly higher than the thermal stability of α,ω‐bis(trimethylsiloxy)polydimethylsiloxane. Significantly increased bulk viscosities were observed for all the modified polymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3007‐3017, 2005     

Syntheses,characterization, and functionalization of poly(ester amide)s with pendant amine functional groups

Poly(ester amide)s (PEAs) comprising α‐amino acids, diols, and diacids are promising materials for biomedical applications such as tissue engineering and drug delivery because of their tunability and potential for either hydrolytic or enzymatic degradation. Although a number of PEAs of different compositions have been reported, there is a significant need for the incorporation of amino acids with functional side chains. This will allow for the conjugation of drugs or cell signaling molecules in tissue engineering scaffolds, thus expanding the potential applications of these materials. The objective of this work was the incorporation of l ‐lysine into PEAs to provide functionalizable pendant amine groups. Thus, varying percentages of lysine were incorporated into PEAs comprised of l ‐phenylalanine, 1,4‐butanediol, and succinic acid by tuning the ratio of ε‐protected‐l ‐lysine and l ‐phenylalanine derived monomers. The polymers were characterized by nuclear magnetic resonance spectroscopy, infrared spectroscopy, size exclusion chromatography, and differential scanning calorimetry. The lysine ε‐protecting group was removed, then the reactivity of the pendant amines was demonstrated by reaction with amino acid and tri(ethylene glycol) derivatives. The degradation of thin films of polymers were studied using scanning electron microscopy and the incorporation of lysine was found to significantly accelerate both the hydrolytic and enzymatic degradation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6376–6392, 2008     

Highly near‐infrared photoluminescence from aza‐borondipyrromethene‐based conjugated polymers

Near‐infrared (NIR) emissive conjugated polymers were prepared by palladium‐catalyzed Sonogashira polymerization of diiodobenzene‐functionalized aza‐borondipyrromethene (Aza‐BODIPY) monomers, which were substituted at 3 and 5 or 1 and 7 positions on the Aza‐BODIPY core, with 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene or 3,3′‐didodecyl‐2,2′‐diethynyl‐5,5′‐bithiophene. The structures of the polymers were confirmed by ¹H NMR, ¹³C NMR, ¹¹B NMR, Fourier transform infrared (FT‐IR) spectroscopies, and size exclusion chromatography (SEC). The optical properties were then characterized by UV–vis absorption and photoluminescence (PL) spectroscopies, and theoretical calculation using density‐functional theory (DFT) method. The polymers were fusible and soluble in common organic solvents including tetrahydrofuran (THF), o‐xylene, toluene, CHCl₃, and CH₂Cl₂, etc. The UV–vis absorption and PL spectra of the polymers shifted to long wavelength region in comparison with simple Aza‐BODIPY as the counterpart because of extended π‐conjugation of the polymers. The polymers efficiently emitted NIR light with narrow emission bands at 713～777 nm on excitation at each absorption maximum. Especially, the polymer attached 1,4‐diethynyl‐2,5‐dihexadecyloxybenzene to 3,5‐position on the core revealed intense quantum yields (?_F = 24%) in this NIR region (753 nm). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of novel degradable photocrosslinked poly(ether‐anhydride) networks

New degradable poly(ether‐anhydride) networks were synthesized by UV photopolymerization. Dicarboxylated poly(ethylene glycol) (PEG) or poly(tetramethylene glycol) (PTMG) was reacted with an excess of methacrylic anhydride to form dimethacrylated macromers containing anhydride linkages. The percent of conversion for the macromer formation was more than 80% at 60 °C after 24 h. ¹H NMR and IR spectroscopies show the presence of anhydride linkages in the macromer. In vitro degradation studies were carried out at 37 °C in PBS with crosslinked polymer networks formed by UV irradiation. All PEG‐based polymers degraded within 2 days, while PTMG‐based polymers degraded by 50% of the initial weight after 14 days. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1277–1282, 2000     

Geminal poly(silyl ester)s: Highly labile degradable polymers

Geminal silyl ester linkages were used for the backbone construction of linear polymers, which exhibit rapid cleavage in the presence of atmospheric water. A series of poly(gem-silyl ester)s with two ester groups flanking each silicon atom were synthesized, in order to probe the effects of different silyl-substituted side-chain groups upon the physical and chemical properties. The transsilylation condensation reaction of bis(trimethylsilyl) terephthalate with dichlorodiisopropylsilane, dichlorodicyclohexylsilane, dichloromethyl-n-octadecylsilane, and dichloromethyl-4-methylphenethylsilane gave the four poly(gem-silyl ester)s with two isopropyl, two cyclohexyl, one methyl plus one octadecyl, and one methyl plus one 4-methyl-phenethyl side-chain groups per silicon, respectively. The polymers were characterized by NMR (¹H, ¹³C, and ²⁹Si), infrared spectroscopy (IR), size-exclusion chromatography (SEC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Hydrolytic degradation studies of the polymers solvated in tetrahydrofuran and as bulk samples in the solid state were performed in the presence of atmospheric water as the nucleophilic cleavage agent, and the molecular weight loss was monitored by SEC. Poly(diisopropylsilyl terephthalate) (1a) and poly(dicyclohexylsilyl terephthalate) (1b) were found to be more stable towards nucleophilic degradation in comparison to poly(methyl-n-octadecylsilyl terephthalate) (1c) and poly(methyl-4-methylphenethylsilyl terephthalate) (1d), due to the presence of sterically bulky isopropyl or cyclohexyl groups attached to the silicon atoms. All of the polymers degraded into small molecules upon hydrolysis, with the exception that the degradation products of 1c and 1d self-condensed in the solid state to form the respective polysiloxanes. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3606–3613, 1999     

Oxidation and epoxidation of poly(1,3‐cyclohexadiene)

Poly(1,3‐cyclohexadiene) (PCHD) derivatives were synthesized via facile chemical modification reactions of the residual double bond in the repeat unit. The oxidation and degradation of PCHD was investigated to enable subsequent controlled epoxidation reactions. PCHD exhibited a 15% weight loss at 110 °C in the presence of oxygen. The oxidative degradation, demonstrated by gel permeation chromatography (GPC) and ¹H NMR spectroscopy, was attributed to main‐chain scission. Aldehyde and ether functional groups were introduced into the polymer during the oxidation process. PCHD was quantitatively epoxidized in the absence of deleterious oxidation with meta‐chloroperoxybenzoic acid. ¹H and ¹³C NMR spectroscopy confirmed that polymers with controlled degrees of epoxidation were reproducibly obtained. Epoxidized PCHD exhibited a glass‐transition temperature at 154 °C, which was slightly higher than that of a PCHD precursor of a nearly equivalent molecular weight. Moreover, GPC indicated the absence of undesirable crosslinking or degradation, and the molecular weight distributions remained narrow. The thermooxidative stability of the fully epoxidized polymer was compared to that of the PCHD precursor, and the epoxidized PCHD exhibited an initial weight loss at 250 °C in oxygen, which was 140 °C higher than the temperature for PCHD. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 84–93, 2003     

Synthesis,characterization, and degradation of poly(anhydride‐co‐amide)s and their blends with polylactide

In attempt to improve the properties of polyanhydrides based on aliphatic anhydrides, we synthesized novel polyanhydrides containing amide groups in the main chains. In this work, N,N′‐bis(L ‐alanine)‐sebacoylamide (BSAM) was prepared from natural amino acid and sebacic acid (SA) and characterized by IR and ¹H NMR. In addition, polymers of PBSAM, P[1,6‐bis(P‐carboxyphenoxy) hexane (CPH)‐BSAM], and P(CPH‐SA), blends of P(CPH‐SA)/polylactide (PLA), P(CPH‐BSAM)/PLA were also prepared and characterized by IR, gel permeation chromatography, and differential scanning calorimetry. The hydrolytic degradation of polyanhydrides and their blends with PLA (number‐average molecular weight = 2.90 × 10⁵) was evaluated in 0.1 M phosphate buffer pH 7.4 at 37 °C. The results indicate that the existence of amide, aromatic, and ester bonds in the main chain of polymers slows down the degradation rate, and the tendency becomes clearer with the increasing amount of them, and the copolymers and their blends with PLA possess excellent physical and mechanical properties. These can make them more widely used in drug delivery and nerve regeneration. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4311–4317, 2004     

Synthesis and properties of new fluorinated ester,thioester, and amide substituted polythiophenes. Towards superhydrophobic surfaces

A series of new fluorinated polythiophenes has been synthesized by oxidative chemical and electrochemical polymerization and by Ullmann coupling. The substitution with the perfluoroalkyl alkyl chain CH₂CH₂C₆F₁₃ on the 3 position of the thiophene ring is performed via an ester, thioester, or amide connector, (CH₂)_m‐C(O)X, m = 0–2, with a view to investigating the role of the linker on the polymerization and on the properties of the corresponding polymers. The bromination of the monomers at the 2 and 5 positions allows the use of Ullmann coupling to form soluble fluorinated oligomers. The electron affinity was determined from cyclic voltammetry and a value of 3.1 eV was found for the ester derivative; such materials represent interesting candidates for use in light‐emitting devices or as an electron accepting material in photodiodes/solar cells. The oxidative polymerizations need the connector to be spaced out from the heterocycle to reduce its withdrawal effect. The ester, thioester, and amide spacer determined to a large extent the efficiency of the oxidative polymerization, and particularly the electropolymerization, as well as the solubility of the polymers formed. All the polymers were analyzed by GPC and by UV–visible and fluorescence spectroscopies. The electrochemical oxidation of the thioester and amide group prevents the formation of electroactive films by electropolymerization. But in the case of the ester group, the electroformed polymer exhibits exceptional stable superhydrophobic and lipophobic properties because of a porous surface and the presence of a fluorinated chain that confers low surface energy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4707–4719, 2007     

Amino acid‐based bioanalogous polymers. Synthesis,and study of regular poly(ester amide)s based on bis(α‐amino acid) α,ω‐alkylene diesters,and aliphatic dicarboxylic acids

The purpose of this research was to synthesize new regular poly(ester amide)s (PEAs) consisting of nontoxic building blocks like hydrophobic α‐amino acids, α,ω‐diols, and aliphatic dicarboxylic acids, and to examine the effects of the structure of these building block components on some physico‐chemical and biochemical properties of the polymers. PEAs were prepared by solution polycondensation of di‐p‐toluenesulfonic acid salts of bis‐(α‐amino acid) α,ω‐alkylene diesters and di‐p‐nitrophenyl esters of diacids. Optimal conditions of this reaction have been studied. High molecular weight PEAs (M_w = 24,000–167,000) with narrow polydispersity (M_w/M_n = 1.20–1.81) were prepared under the optimal reaction conditions and exhibited excellent film‐forming properties. PEAs obtained are mostly amorphous materials with T_g from 11 to 59°C. α‐Chymotrypsin catalyzed in vitro hydrolysis of these new PEA substrates was studied to assess the effect of the building blocks of these new polymers on their biodegradation properties. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 391–407, 1999     

Synthesis and characterization of novel biodegradable unsaturated poly(ester amide)s

A series of novel biodegradable unsaturated poly(ester amide)s (UPEAs) were synthesized through the solution polycondensation of two unsaturated monomers, di‐p‐nitrophenyl fumarate and L ‐phenylalanine 2‐butene‐1,4‐diol diester p‐toluene sulfonate, and four other saturated monomers in different combinations. The UPEAs were obtained in fairly good yields with N,N‐dimethylacetamide (DMA) as the solvent. The number‐average and weight‐average molecular weights of the UPEAs, measured by gel permeation chromatography, ranged from 10 to 30 kg/mol, they had a rather narrow molecular weight distribution of 1.40. The chemical structures of the novel biodegradable UPEAs were confirmed by both IR and NMR spectra. The UPEAs had higher glass‐transition temperatures than saturated PEAs of similar structures, and their glass‐transition temperatures were affected more by the CC double bond located in the diamide part than by those in the diester part. The solubility of the polymers was poor in water but better in DMA and dimethyl sulfoxide. With the availability of these inherent CC double bonds in the UPEA backbones, these UPEAs have the functionality of CC bonds, such as photochemical reactivity or the ability to react with or be modified by other bioactive or other environmentally sensitive compounds, and this can easily extend their applications to biomedical and pharmaceutical areas. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1463–1477, 2005     

Synthesis and liquid crystalline properties of new amide‐modified poly(1,4‐cyclohexanedimethylene terephthalate)

New series of cycloaliphatic poly(ester‐amide)s, poly(1,4‐cyclohexanedimethyleneterephthalate‐co‐1,3‐cyclohexanedimethylene terephthalamide), were synthesized through solution polymerization route. The compositions of ester/amide units in the copolymers were varied from 0 to 100% by varying the amount of 1,4‐cyclohexanedimethanol and 1,3‐cyclohexanebis(methylamine) in the feed. The structures of the polymers were confirmed by NMR and FTIR, and the molecular weights were determined by inherent viscosity. The composition analysis by NMR reveals that the reactivity of the diamine toward the acid chlorides is lowered than that of diol, which results in the formation of more ester content in the poly (ester‐amides). The thermal analysis indicate that the new poly(ester‐amide)s having less than 10 mol % of amide linkages are thermotropic liquid crystalline from 200 to 250 °C and a thread like nematic phases are observed under the polarizing microscope. WXRD studies suggest that the liquid crystalline domains promote the nucleation process in the polyester chains and increases the percent crystallinity of the poly(ester‐amide)s. The glass transition temperature of the copolymers initially increases with increase in amide units because of the presence of nematic phases and subsequently follows the Flory–Fox behavior. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 42–52, 2006     

Hydrogen‐bonded thermotropic liquid‐crystalline polyester–amides from bis(hydroxy alkamido)aranes: Synthesis and properties

Hydrogen‐bonded aromatic–aliphatic polyester–amides (PEAs) were prepared by solution/melt polycondensation of aromatic–aliphatic amidodiols 1,4‐bis(4‐hydroxybutyramide)benzene (BHBB), 1,4‐bis(5‐hydroxy pentamide)benzene, 1,4‐bis(6‐hydroxyhexamide)benzene, 1,4‐bis(4‐hydroxybutyramidexylene), 1,4‐bis(5‐hydroxypentamidexylene, 1,4‐bis(4‐hydroxybutyramide)benzene, and 1,4‐bis(6‐hydroxyhexamidexylene) with terephthaloyl chloride/dimethyl terephthalate. Aromatic–aliphatic amido diols were prepared by the aminolysis of γ‐butyrolactone, δ‐valerolactone, and ?‐caprolactone with aromatic diamines such as paraphenylene diamine and paraxylene diamine. The monomers and polymers were characterized by chemical analysis (hydroxyl value and elemental analysis), Fourier transform infrared spectroscopy, ¹H NMR, and ¹³C NMR. The thermal‐ and phase‐transition behaviors of the polymers were investigated by differential scanning calorimetry in combination with hot‐stage optical microscopy. Crystallinity of polymers was examined with wide‐angle X‐ray diffraction. The polymers exhibited liquid crystallinity with layered structures formed by self‐organization of the hetero intermolecular hydrogen‐bonded networks indicating smectic phases except for PEAs prepared from BHBB. The hydrogen atom of the phenyl‐substituent group forces the neighboring carbonyl groups out of plane of the rings preventing formation of layered structures in the case of BHBB. The PEAs retained intermolecular hydrogen bonding even in the mesomorphic state, and variations in the hydrogen‐bonded lamellae/micelles might be responsible for the variations from one smectic to another texture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 335–346, 2003     

Synthesis and characterization of functionalized water soluble cationic poly(ester amide)s

A new family of positively charged, water soluble and functional amino acid‐based poly(ester amide)s ( Arg‐AG PEA ) consisting of four building blocks (L ‐Arginine, DL ‐2‐Allylglycine, oligoethylene glycol, and aliphatic diacid) were synthesized by the solution copolycondensation. Functional pendant carbon–carbon double bonds located in the DL ‐2‐allylglycine unit were incorporated into these Arg‐AG PEAs, and the double bond contents could be adjusted by tuning the feed ratio of L ‐arginine to DL ‐2‐allylglycine monomers. Chemical structures of this new functional Arg‐AG PEA family were confirmed by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectra. The thermal property of these polymers was investigated; increasing the methylene chain in both the amino acid and diacid segments resulted in a reduction in the polymer glass‐transition temperature. All these cationic Arg‐AG PEAs had good solubility in water and polar organic solvents. The cytotoxity of Arg‐AG PEAs was evaluated by 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay. These preliminary MTT results indicated that Arg‐AG PEAs were nontoxic to bovine aortic endothelial cells (BAECs). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3758–3766, 2010