Thiol‐terminated polyisobutylene: Synthesis,characterization, and derivatization

Thiol‐terminated polyisobutylene (α,ω‐PIB‐SH) was synthesized from thiourea and α,ω‐bromine‐terminated PIB in a three‐step, one‐pot procedure, using a cosolvent system of 1:1 (v:v) heptane:dimethylformamide. The initial alkylisothiouronium salt was produced at 90 °C. Aqueous base hydrolysis at 110 °C resulted in thiolate chain ends, which were re‐acidified to form telechelic PIB‐SH. ¹H and ¹³C NMR confirmed thiol functionality and complete terminal halogen conversion. Thiol‐based “click” reactions were used to demonstrate PIB‐SH utility. Alkyne‐terminated PIB was synthesized by a phosphine‐catalyzed thiol‐ene Michael addition with propargyl acrylate. Reaction of this product with 6‐mercaptohexanol produced tetrahydroxy‐functional PIB by a sequential thiol‐ene/thiol‐yne procedure. ¹H NMR confirmed the structures of both products. PIB‐SH was reacted with isocyanates in the presence of base to produce polythiourethanes. A model reaction used phenyl isocyanate in THF with catalytic triethylamine. Similar conditions were used to produce PIB‐based thiourethanes with and without a small‐molecule chain extender. Increased molecular weights and thiol group conversion were observed with GPC and ¹H NMR, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

One‐Handed Single Helicates of Dinickel(II) Benzenehexapyrrole‐α,ω‐diimine with an Amine Chiral Source

Benzenehexapyrrole‐α,ω‐dialdehyde, composed of a pair of formyltripyrrole units with a 1,3‐phenylene linker, was metallated to give dinuclear single‐stranded helicates. X‐ray studies of the bis‐nickel(II) complex showed a helical C₂ form with a pair of helical–metal coordination planes of a 3N+O donor set. The terminal aldehyde was readily converted into the imine by optically active amines, whereby helix‐sense bias was induced. Bis‐nickel(II) and bis‐palladium(II) complexes of the benzenehexapyrrole‐α,ω‐diimines were studied to show that an enantiomer pair of the helical C₂ form are interchanged by slow flipping of each coordination plane and fast rotation around the C(benzene)?C(pyrrole) bond. The helical screw in the bis‐nickel(II) complexes was biased to one side in more than 95 % diastereoselectivity, which was achieved by using a variety of optically active amines, such as (R)‐1‐cyclohexylethylamine, (S)‐1‐ phenylethylamine, L ‐Phe(OEt) (Phe=phenylalanine), and (R)‐valinol. The nickel complexes showed much better diastereoselectivity than the corresponding palladium complexes.     

A series of (E)‐5‐(arylideneamino)‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitriles and their reduction products to secondary amines: syntheses and X‐ray structural studies

An efficent access to a series of N‐(pyrrol‐2‐yl)amines, namely (E)‐1‐tert‐butyl‐5‐[(4‐chlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₆ClN₃, (7a), (E)‐1‐tert‐butyl‐5‐[(2,4‐dichlorobenzylidene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₅Cl₂N₃, (7b), (E)‐1‐tert‐butyl‐5‐[(pyridin‐4‐ylmethylene)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₅H₁₆N₄, (7c), 1‐tert‐butyl‐5‐[(4‐chlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₈ClN₃, (8a), and 1‐tert‐butyl‐5‐[(2,4‐dichlorobenzyl)amino]‐1H‐pyrrole‐3‐carbonitrile, C₁₆H₁₇Cl₂N₃, (8b), by a two‐step synthesis sequence (solvent‐free condensation and reduction) starting from 5‐amino‐1‐tert‐butyl‐1H‐pyrrole‐3‐carbonitrile is described. The syntheses proceed via isolated N‐(pyrrol‐2‐yl)imines, which are also key synthetic intermediates of other valuable compounds. The crystal structures of the reduced compounds showed a reduction in the symmetry compared with the corresponding precursors, viz. Pbcm to P from compound (7a) to (8a) and P2₁/c to P from compound (7b) to (8b), probably due to a severe change in the molecular conformations, resulting in the loss of planarity observed in the nonreduced compounds. In all of the crystals, the supramolecular assembly is controlled mainly by strong (N,C)—H…N hydrogen bonds. However, in the case of (7a)–(7c), C—H…Cl interactions are strong enough to help in the three‐dimensional architecture, as observed in Hirshfeld surface maps.     

Platinum‐Catalyzed Multi‐Step Reaction of Propargyl Alcohols with N‐Heteroaromatics

N‐Methyl indole reacts with but‐2‐yn‐1‐ol in the presence of PtCl₂ in MeOH giving indole derivatives having a substituted 3‐oxobutyl group at the 3‐position in good yield. Under the reaction conditions, various substituted indoles and substituted propargyl alcohols are successfully involved in the reaction giving the corresponding addition products in good to moderate yields. The catalytic reaction can be further extended to N‐phenyl pyrrole. In the present multi‐step reaction, PtCl₂ likely plays dual roles: as the catalyst for the rearrangement of propargyl alcohols to the corresponding alkenyl ketones and as the catalyst for the addition of indoles to the alkenyl ketones. Experimental evidence is provided to support the proposed mechanism.     

Highly Sensitive Functionalized Conducting Copolypyrrole Film for DNA Sensing and Protein‐resistant

In order to exploit the applications of polypyrrole (PPy) derivatives in biosensors and bioelectronics, the different immobilization mechanisms of biomolecules onto differently functionalized conducting PPy films are investigated. Pyrrole and pyrrole derivatives with carboxyl and amino groups were copolymerized with ω‐(N‐pyrrolyl)‐octylthiol self‐assembled on Au surface by the method of the chemical polymerization to form a layer of the copolymer film, i.e., poly[pyrrole‐co‐(N‐pyrrolyl)‐caproic acid] (poly(Py‐co‐PyCA)) and poly[pyrrole‐co‐(N‐pyrrolyl)‐hexylamine] (poly(Py‐co‐PyHA)), in which the carboxyl groups in poly(Py‐co‐PyCA) were activated to the ester groups. Based on the structure characteristics, the immobilization/hybridization of DNA molecules on PPy, poly(Py‐co‐PyCA) and poly(Py‐co‐PyHA) were surveyed by cyclic voltammograms measurements. For differently functionalized copolymers, the immobilization mechanisms of DNA are various. Besides the electrochemical properties of the composite electrodes of PPy and its copolymers being detected before and after bovine serum albumin (BSA) adsorption, the kinetic process of protein binding was determined by surface plasmon resonance of spectroscopy. Since few BSA molecules could anchor onto the PPy and its copolymers surfaces, it suggests this kind of conducting polymers can be applied as the protein‐resistant material.     

Visible light‐induced thiol‐ene reaction: A new strategy to prepare Α,ω‐dithiol and Α,ω‐divinyl telechelic polythiolether oligomers

A new strategy is developed to prepare both α,ω‐dithiol and α,ω‐divinyl linear telechelic polythiolether oligomers by visible light induced thiol‐ene chemistry in the presence of a fac‐Ir(ppy)₃ photoredox catalyst. Polythiolether oligomers of well‐defined end groups and controlled molecular weights have been successfully synthesized at varying monomer molar ratios of 1,4‐benzenedimethanethiol (BDMT) to diethylene glycol divinyl ether (DEGVE). ¹H NMR and MALDI‐TOF MS analyses demonstrate that as‐prepared polythiolethers possess high end‐group fidelity, which is further supported by the successful polyaddition of polythiolethers bearing α,ω‐dithiol and α,ω‐divinyl groups. For example, with the α,ω‐dithiol‐ (M_n = 1900 g mol^?1, PDI = 1.25) and α,ω‐divinyl‐terminated (M_n = 2000 g mol^?1, PDI = 1.29) polythiolethers as macromonomers, the molecular weight of resulting polythiolether is up to 7700 g mol^?1 with PDI as 1.67. The reactivity of the terminal thiol group is further confirmed by the addition reaction with N‐(1‐pyrenyl)maleimide. UV‐vis spectra and fluorescene measurements suggest that fac‐Ir(ppy)₃ undergo a redox quenching process reacted with BDMT to generate thiyl free radicals. With these results, the mechanism of the thiol‐ene reaction catalyzed by photoredox catalyst is proposed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 740–749     

Isomeric 3‐ and 4‐chloro‐N‐[1‐(1H‐pyrrol‐2‐yl)ethylidene]aniline

The title isomers, namely 3‐chloro‐N‐[1‐(1H‐pyrrol‐2‐yl)ethylidene]aniline, (I), and 4‐chloro‐N‐[1‐(1H‐pyrrol‐2‐yl)ethylidene]aniline, (II), both C₁₂H₁₁ClN₂, differ in the position of the chlorine substitution. Both compounds have the basic iminopyrrole structure, which shows a planar backbone with similar features. The dihedral angle formed by the planes of the pyrrole and benzene rings is 75.65 (7)° for (I) and 86.56 (8)° for (II). The H atom bound to the pyrrole N atom is positionally disordered and partial protonation occurs at the imino N atom in (I), while this phenomenon is absent from the structure of (II). Packing interactions for both compounds include intermolecular N—H...N hydrogen bonds and C—H...π interactions, forming centrosymmetric dimers for both (I) and (II).     

Quasiliving Carbocationic Polymerization. XVII. Synthesis Of Poly (Styrene-β-Isobutylene-β-Styrene)

Poly(styrene-b-isobutylene-b-styrene) has been synthesized by sequential carbocationic polymerization under quasiliving conditions at -90°C. The quasiliving synthesis was effected by first continuously and slowly condensing gaseous isobutylene (IB) to a bifunctional initiating system (p-dicumyl chloride/TiCl₄) dissolved in a hexane-methylene chloride (60:40 v/v) mixture. After the quasiliving polyisobutylene (PIB) sequence had reached a desired molecular weight, styrene (St) was continuously and slowly added to produce the polystyrene (PSt) sequence. The products consisted of the target triblock. However, due to initiation by impurities and possibly to chain transfer to both IB and St, it also contained diblocks and small amounts of homopolymers. While the latter could be removed by selective fractionation, the triblocks and diblocks could not be separated. The mechanism of quasiliving polymerization leading to PIB/PSt blocks is discussed.     

NMR studies on a palladium(II) complex containing an incompletely coordinated facultative pentadentate Schiff base ligand

Palladium(II) dichloride reacts with 1,10‐bis(2‐pyrrolyl)‐2,5,9‐triaza‐1,9‐decadiene to give a [Pd(C₁₅H₂₀N₅)]Cl complex in which the ligand is four‐coordinated, leaving one pyrrole group dangling. By using COSY, gHSQC, gHMBC connectivities and NOE experiments it has been concluded that one linkage isomer exists in DMSO solution, in spite of the fact that different sets of N atoms of potentially pentadentate ligand might be involved in coordination, and that the three chelate rings in the complex cation are arranged in a sequence: five‐membered, six‐membered, five‐membered which is different from that (5–5–6) found by x‐ray studies on the related [Ni(C₁₅H₂₀N₅)]Cl compound. NMR studies allowed an unambiguous assignment of all ¹H and ¹³C NMR resonances for the complex. Results of x‐ray structural analysis of [Pd(C₁₅H₂₀N₅)](CH₃COO)H₂O supported the five‐membered, six‐membered, five‐membered ring sequence in the [Pd(C₁₅H₂₀N₅)]⁺ complex cation and show an E (trans) orientation of the dangling pyrrole group with respect to the metal center. Copyright © 2002 John Wiley & Sons, Ltd.     

Reactions of a Ruthenium Complex with Substituted N‐Propargyl Pyrroles

In an investigation into the chemical reactions of N‐propargyl pyrroles 1 a – c , containing aldehyde, keto, and ester groups on the pyrrole ring, with [Ru]?Cl ([Ru]=Cp(PPh₃)₂Ru; Cp=C₅H₅), an aldehyde group in the pyrrole ring is found to play a crucial role in stimulating the cyclization reaction. The reaction of 1 a , containing an aldehyde group, with [Ru]?Cl in the presence of NH₄PF₆ yields the vinylidene complex 2 a , which further reacts with allyl amine to give the carbene complex 6 a with a pyrrolizine group. However, if 1 a is first reacted with allyl amine to yield the iminenyne 8 a , then the reaction of 8 a with [Ru]?Cl in the presence of NH₄PF₆ yields the ruthenium complex 9 a , containing a cationic pyrrolopyrazinium group, which has been fully characterized by XRD analysis. These results can be adequately explained by coordination of the triple bond of the propargyl group to the ruthenium metal center first, followed by two processes, that is, formation of a vinylidene intermediate or direct nucleophilic attack. Additionally, the deprotonation of 2 a by R₄NOH yields the neutral acetylide complex 3 a . In the presence of NH₄PF₆, the attempted alkylation of 3 a resulted in the formation the Fischer‐type amino–carbene complex 5 a as a result of the presence of NH₃, which served as a nucleophile. With KPF₆, the alkylation of 3 a with ethyl and benzyl bromoacetates afforded the disubstituted vinylidene complexes 10 a and 11 a , containing ester groups, which underwent deprotonation reactions to give the furyl complexes 12 a and 13 a , respectively. For 13 a , containing an O‐benzyl group, subsequent 1,3‐migration of the benzyl group was observed to yield product 14 a with a lactone unit. Similar reactivity was not observed for the corresponding N‐propargyl pyrroles 1 b and 1 c , which contained keto and ester groups, respectively, on the pyrrole ring.     

1‐(2‐Pyridyl)ethan‐1‐one 8‐quinolylhydrazone and 1‐(1H‐pyrrol‐2‐yl)ethan‐1‐one 8‐quinolylhydrazone

The structures of the title compounds, C₁₆H₁₄N₄, (I), and C₁₅H₁₄N₄, (II), respectively, have been determined, and their molecular packing arrangements compared. Both are essentially flat mol­ecules, with respective dihedral angles between the quinoline and heterocyclic rings of 19.0 (1) and 8.5 (2)°. The pyridyl derivative, (I), packs in a P2₁/c unit cell, while in the pyrrolyl compound, (II), the mol­ecules pack in Pca2₁ and form a crinkled ribbon arrangement through the association of pyrrole NH groups with the quinoline N atoms.     

Cyclisation versus 1,1‐Carboboration: Reactions of B(C6F5)3 with Propargyl Amides

A series of propargyl amides were prepared and their reactions with the Lewis acidic compound B(C₆F₅)₃ were investigated. These reactions were shown to afford novel heterocycles under mild conditions. The reaction of a variety of N‐substituted propargyl amides with B(C₆F₅)₃ led to an intramolecular oxo‐boration cyclisation reaction, which afforded the 5‐alkylidene‐4,5‐dihydrooxazolium borate species. Secondary propargyl amides gave oxazoles in B(C₆F₅)₃ mediated (catalytic) cyclisation reactions. In the special case of disubstitution adjacent to the nitrogen atom, 1,1‐carboboration is favoured as a result of the increased steric hindrance (1,3‐allylic strain) in the 5‐alkylidene‐4,5‐dihydrooxazolium borate species.     

Magnesium Halide‐promoted Ring‐opening Reaction of Cyclic Ether in the Presence of Phosphine Halide

A new route to the direct preparation of H‐phosphinate esters has been explored. The ring‐opening reaction of cyclic ether (tetrahydrofuran or tetrahydropyrane) was carried out with magnesium halide in the presence of phosphine halide (PRCl₂ or PCl₃). The process is straightforward and all the reagents are relatively cheap and readily available. Magnesium halide‐mediated THF ring‐opening (S_N2@C) and the subsequent S_N2@P elementary reactions that giving rise to the intermediate of haloalkyl phosphinates have been discussed based on our experimental findings ( Path I : S_N2@C−+S_N2@P). Another possible route, the direct S_N2 between THF (nucleophile) and phosphine halide (electrophile) that followed by THF ring opening by halide dissociated from phosphine halide ( Path II: S_N2@P−+S_N2@C), was also proposed. However, path II is the least likely reaction path because neutral THF is not a good nucleophile. H‐phosphinate esters could be readily available in the subsequent hydrolysis process. Considering the ionic bond strength in magnesium halides and the nucleophilicity of halides dissociated from MgX₂ in protic solvents like water, MgBr₂ is recommended for ring‐opening reactions of cyclic ethers.     

Efficient Pictet–Spengler Bioconjugation with N‐Substituted Pyrrolyl Alanine Derivatives

We discovered N‐pyrrolyl alanine derivatives as efficient reagents for the fast and selective Pictet–Spengler reaction with aldehyde‐containing biomolecules. Other aldehyde‐labeling methods described so far have several drawbacks, like hydrolytic instability, slow reaction kinetics or not readily available labeling reagents. Pictet–Spengler cyclizations of pyrrolyl 2‐ethylamine substituted at the pyrrole nitrogen are significantly faster than with analogues substituted at the α‐ and β‐ position. Functionalized N‐pyrrolyl alanine derivatives can be synthesized in only 2–3 steps from commercially available materials. The small size of the reagent, the high reaction rate, and the easy synthesis make pyrrolyl alanine Pictet–Spengler (PAPS) an attractive choice for bioconjugation reactions. PAPS was shown as an efficient strategy for the site‐selective biotinylation of an antibody as well as for the condensation of nucleic‐acid derivatives, demonstrating the versatility of this reagent.     

A novel class of fused heterocycles,benzo­[b]­furo­[2,3‐c]­pyrroles

In the isomeric compounds 2‐benzyl‐3‐methyl‐1‐phenyl­benzo­[b]­furo­[2,3‐c]­pyrrole and 2‐benzyl‐1‐methyl‐3‐phenyl­benzo­[b]­furo­[2,3‐c]­pyrrole, both C₂₄H₁₉NO, the pyrrole ring, although presumably somewhat strained, does not differ appreciably from N‐methyl­pyrrole except for a relatively short C—C single bond in the pyrrole ring.     

Synthesis and Characterization of Metal Complexes (M = Al,Ti, W,Zn) Containing Pyrrole‐imine Ligands

A series of metal compounds (M = Al, Ti, W, and Zn) containing pyrrole‐imine ligands have been prepared and structurally characterized. The reactions of AlMe₃ with one and three equivs of pyrrole‐imine ligand [C₄H₃NH‐(2‐CH=N? CH₂Ph)] ( 1 ) generated aluminum compounds Al[C₄H₃N‐(2‐CH=N? CH₂Ph)]Me₂ ( 2 ) and Al[C₄H₃N‐(2‐CH=NCH₂Ph)]₃ ( 3 ), respectively, in relatively high yield. Reacting two equivs of 1 with Ti(OⁱPr)₄, W(NH^tBu)₂(=N^tBu)₂, or ZnMe₂ afforded Ti[C₄H₃N‐(2‐CH=NCH₂Ph)]₂(OⁱPr)₂ ( 4 ), W[C₄H₃N‐(2‐CH=NCH₂Ph)]₂(=N^tBu)₂ ( 5 ), and Zn[C₄H₃N‐(2‐CH=NCH₂Ph)]₂ ( 6 ), respectively. All the compounds have been characterized by ¹H and ¹³C NMR spectroscopy. Compounds 3 – 6 have also been characterized by single‐crystal X‐ray structural analysis. The biting angles of pyrrole‐imine ligand with metals decrease and their related M? N_pyrrole and M? N_imine bond lengths increase in the order of 6 , 3 , 4 , and 5 .     

Synthesis and Structure of Unprecedented Samarium Complex with Bulky Bis‐iminopyrrolyl Ligand via Intramolecular C=N Bond Activation

An unprecedentate samarium complex of the molecular composition [{κ³‐{(Ph₂CH)N=CH}₂C₄H₂N)}{κ³‐{(Ph₂CHN=CH)(Ph₂CHNCH)C₄H₂N}Sm}₂] ( 2 ), which was isolated by the reaction of a potassium salt of 2,5‐bis{N‐(diphenylmethyl)‐iminomethyl}pyrrolyl ligand [K(THF)₂{(Ph₂CH)N=CH}₂C₄H₂N)] ( 1 ) with anhydrous samarium diiodide in THF at 60 °C through the in situ reduction of imine bond is presented. The homoleptic samarium complex [[κ³‐{(Ph₂CH)–N=CH}₂C₄H₂N)]₃Sm] ( 3 ) can also be obtained from the reaction of compound 1 with anhydrous samarium triiodide (SmI₃) in THF at 60 °C. The molecular structures of complexes 2 and 3 were established by single‐crystal X‐ray diffraction analysis. The molecular structure of complex 2 reveals the formation of a C–C bond in the 2,5‐bis{N‐(diphenylmethyl)iminomethyl}pyrrole ligand moiety (Ph₂Py^–). However, complex 3 is a homoleptic samarium complex of three bis‐iminopyrrolyl ligands. In complex 2 , the samarium ion adopts an octahedral arrangement, whereas in complex 3 , a distorted three face‐centered trigonal prismatic mode of nine coordination is observed around the metal ion.     

Rubbery wound closure adhesives. I. design,synthesis, characterization,and testing of polyisobutylene‐based cyanoacrylate homo‐ and co‐networks

Novel rubbery wound closures containing various proportions and molecular weights of polyisobutylene (PIB) and poly(2‐octyl cyanoacrylate) [P(OctCA)] for potential clinical use were designed, synthesized, characterized, and tested. Homo‐networks were prepared by crosslinking 3‐arm star‐shaped PIBs fitted with terminal cyanoacrylate groups, [Ø(PIB‐CA)₃], and co‐networks by copolymerizing Ø(PIB‐CA)₃ with OctCA using N‐dimethyl‐p‐toluidine (DMT). Neat Ø(PIB‐CA)₃, and Ø(PIB‐CA)₃/OctCA blends, upon contact with initiator, polymerize within seconds to optically transparent strong rubbery co‐networks, Ø(PIB‐CA)₃‐co‐P(OctCA). Homo‐ and co‐network formation was demonstrated by sol/gel studies, and structures and properties were characterized by a battery of techniques. The T_g of P(OctCA) is 58 °C by DSC, and 75 °C by DMTA. Co‐networks comprising 25% Ø(PIB‐CA)₃ (M_n = 2400 g/mol) and 75% P(OctCA) are stronger and more extensible than skin. Short and long term creep studies show co‐networks exhibit high dimensional stability and <6% creep strain at high loading. When deposited on porcine skin co‐networks yield hermetically‐adhering clear rubbery coatings. Strips of porcine skin coated with co‐networks could be stretched and twisted without compromising membrane integrity. The co‐network is nontoxic to L‐929 mouse fibroblasts. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1640–1651     

Macrocyclic Transformations from Norrole to Isonorrole and an N‐Confused Corrole with a Fused Hexacyclic Ring System Triggered by a Pyrrole Substituent

Three kinds of fused porphyrinoids, L2 – L4 , possessing different types of corrole‐based frameworks were synthesized from a pyrrole‐substituted corrole isomer (norrole L1 ). Oxidation of L1 afforded a unique N‐C_meso‐fused pyrrolyl isonorrole L2 , involving the fusion of an auxiliary pyrrolic NH moiety with a meso‐sp³‐hybridized carbon atom. Subsequently, L2 underwent macrocycle transformations to give singly and doubly N‐C_Ar‐fused N‐confused corroles, L3 and L4 , respectively. L3 and L4 contain fused [5.7.6.5]‐tetra‐ and [5.6.7.7.6.5]‐hexacyclic structures, respectively, prepared through lateral annulation. These skeletal transformation reactions from norrole to its isomer isonorrole and finally to N‐confused corrole indicate that multiply fused porphyrinoids could be readily synthesized from pyrrole‐appended confused porphyrinoids.     

5‐Hydroxyalkyl derivatives of tert‐butyl 2‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate: diastereoselectivity of the Mukaiyama crossed‐aldol‐type reaction

The title compounds, rac‐(1′R,2R)‐tert‐butyl 2‐(1′‐hydroxyethyl)‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₁₇H₂₀N₂O₆, (I), rac‐(1′S,2R)‐tert‐butyl 2‐[1′‐hydroxy‐3′‐(methoxycarbonyl)propyl]‐3‐(2‐nitrophenyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₂₀H₂₄N₂O₈, (II), and rac‐(1′S,2R)‐tert‐butyl 2‐(4′‐bromo‐1′‐hydroxybutyl)‐5‐oxo‐2,5‐dihydro‐1H‐pyrrole‐1‐carboxylate, C₁₃H₂₀BrNO₄, (III), are 5‐hydroxyalkyl derivatives of tert‐butyl 2‐oxo‐2,5‐dihydropyrrole‐1‐carboxylate. In all three compounds, the tert‐butoxycarbonyl (Boc) unit is orientated in the same manner with respect to the mean plane through the 2‐oxo‐2,5‐dihydro‐1H‐pyrrole ring. The hydroxyl substituent at one of the newly created chiral centres, which have relative R,R stereochemistry, is trans with respect to the oxo group of the pyrrole ring in (I), synthesized using acetaldehyde. When a larger aldehyde was used, as in compounds (II) and (III), the hydroxyl substituent was found to be cis with respect to the oxo group of the pyrrole ring. Here, the relative stereochemistry of the newly created chiral centres is R,S. In compound (I), O—H...O hydrogen bonding leads to an interesting hexagonal arrangement of symmetry‐related molecules. In (II) and (III), the hydroxyl groups are involved in bifurcated O—H...O hydrogen bonds, and centrosymmetric hydrogen‐bonded dimers are formed. The Mukaiyama crossed‐aldol‐type reaction was successful when using the 2‐nitrophenyl‐substituted hydroxypyrrole, or the unsubstituted hydroxypyrrole, and boron trifluoride diethyl ether as catalyst. The synthetic procedure leads to a syn configuration of the two newly created chiral centres in all three compounds.