三聚氰胺磁性分子印迹聚合物材料的制备及性能表征

利用溶剂热法通过控制反应时间和温度制得了分散性好和磁性强的Fe3O4,并利用溶胶凝胶法制备得到包覆SiO2的磁性微球(Fe3O4@SiO2)。以三聚氰胺为模板分子,甲基丙烯酸(MAA)为单体,采用本体聚合法制备了磁性分子印迹聚合物(MMIPs)。通过静态吸附实验表明,MMIPs对三聚氰胺的饱和吸附量高达10.22μg/mg,是磁性非印迹聚合物(MNIPs)的1.62倍。粒子扩散模型、Elovich模型和动态吸附实验表明所制得的MMIPs有较好的吸附性能。     

Synthesis and binding properties of a noncovalent molecularly imprinted testosterone-specific polymer

In this study, molecular imprinting was used to develop a method based on noncovalent interactions for synthesis of a testosterone-specific polymer. The effect of the different template–monomer ratios, the particle sizes of polymers, and chromatographic mobile phases on steroid–polymer interactions are discussed. The polymer obtained was found to interact specifically with testosterone, while other steroids under study were eluted close to the void volume in the HPLC experiments. Batch rebinding studies in acetonitrile were undertaken to quantitatively evaluate the affinity of the polymer for testosterone. During this experiment, the testosterone concentration was measured in two ways: spectrophotometrically and by HPLC on a column with testosterone-specific imprinted polymer synthesized by us. Both methods resulted in similar values of association constants and the number of binding sites. However, the second method has obvious advantages when the analyzed solution contains a mixture of optically dense compounds. The results obtained focus on the two-point binding nature of the imprinted polymer–testosterone interaction and the significant role of hydrogen bonds between the OH group of testosterone and carboxy group of methacrylic acid residues inside specific recognition sites of the imprinted polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1725–1732, 1998     

Preparation of molecularly imprinted polymer microspheres via atom transfer radical precipitation polymerization

The first combined use of atom transfer radical polymerization (ATRP) and precipitation polymerization in the molecular imprinting field is described. The utilized polymerization technique, namely atom transfer radical precipitation polymerization (ATRPP), provides MIP microspheres with obvious molecular imprinting effects towards the template, fast template binding kinetics and an appreciable selectivity over structurally related compounds. The living chain propagation mechanism in ATRPP results in MIP spherical particles with diameters (number‐average diameter D_n ≈ 3 μm) much larger than those prepared via traditional radical precipitation polymerization (TRPP). In addition, the MIP microspheres prepared via ATRPP have also proven to show significantly higher high‐affinity binding site densities on their surfaces than the MIP generated via TRPP, while the binding association constants K_a and apparent maximum numbers N_max of the high‐affinity sites as well as the specific template bindings are almost the same in the two cases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3257–3270, 2009     

Controlling drug release from imprinted hydrogels by modifying the characteristics of the imprinted cavities

The aim of this study was to analyse the influence of the template/functional monomer proportion on the achievement of molecularly imprinted hydrogels with cavities with a high enough affinity for the drug to sustain drug release. Imprinted hydrogels were prepared from N,N-dimethylacrylamide and tris(trimethylsiloxy)sililpropyl methacrylate (DMAA and TRIS; main components), methacrylic acid (MAA; functional monomer), ethylene glycol dimethacrylate (EGDMA; cross-linker), and timolol (template drug). Photo-polymerization of the monomer solutions was carried out in poly(propylene) molds (0.3 mm thickness) to obtain contact lens-like devices. Non-imprinted control hydrogels were also prepared in the same way but without the addition of timolol. The imprinted hydrogels showed a higher affinity for timolol and a slower release rate than the non-imprinted hydrogels. The release rate decreased by increasing the MAA/timolol ratio in the gel recipe. Hydrogels prepared with 400 x 10(-3) M MAA, 600 x 10(-3) M EGDMA, and a timolol/MAA mole ratio of 1:16-1:32 had drug diffusion coefficients two orders of magnitude below those of non-imprinted hydrogels. The results obtained clearly indicate that the timolol release rate is critically affected by the conditions under which the hydrogels were synthesized. These effects are discussed on the basis of the influence of drug proportion on the conformation of the imprinted cavities.     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

槲皮素表面分子印迹聚合物的制备及其应用研究

以接枝双键的凹凸棒土(TM)为载体,槲皮素为模板分子,采用表面印迹技术制备对槲皮素具有特异吸附性能的分子印迹聚合物(MIP)。利用光谱法选择实验条件及对化合物表征。采用静态法研究聚合物对槲皮素的结合性能与识别性能。结果表明,该分子印迹材料对槲皮素具有特异的识别特性和优良的亲和性,提高了传统聚合物的结合率。以该印迹聚合物为固相萃取材料,结合高效液相色谱法,对白菜中的槲皮素进行分离富集,方法回收率为84.0%~90.6%,相对标准偏差低于5.6%。     

Nonaqueous emulsion polymerization: A practical synthetic route for the production of molecularly imprinted nanospheres

Monodisperse, molecularly imprinted nanospheres were synthesized by nonaqueous (mini)emulsion polymerization using a standard monomer mixture of methacrylic acid and ethylene dimethacrylate containing the drug propranolol as a template. The preparation conditions (solvent, amount of surfactant, and amount of employed template) were extensively varied in order to assess their effect on the properties of the resulting polymer nanoparticles. The molecular recognition capability of the nanospheres was evaluated in batch rebinding experiments, and the effect of the nanosphere preparation conditions as well as of the reaction conditions was investigated. In this way, optimal preparation protocols for molecularly imprinted nanoparticles under nonaqueous conditions with the use of a nonionic emulsifier were identified, which lead to nanospheres with a diameter of around 100 nm having an enhanced capacity of specific template rebinding compared to both nonimprinted nanospheres and to particles obtained by emulsion polymerization in water. Best results were obtained with nanospheres prepared in N,N‐dimethylformamide/n‐hexane with a high functional monomer to template ratio. The enantioselectivity of the rebinding process was also demonstrated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation of molecularly imprinted polymers via atom transfer radical “bulk” polymerization

The first application of atom transfer radical “bulk” polymerization (ATRBP) in molecular imprinting is described, which provides molecularly imprinted polymers (MIPs) with obvious imprinting effects towards the template, very fast binding kinetics, and an appreciable selectivity over structurally related compounds. In comparison with the MIP prepared via the normally used traditional “bulk” free radical polymerization (BFRP), the MIPs obtained via ATRBP showed somewhat lower binding capacities and apparent maximum numbers N_max for high‐affinity sites as well as quite similar binding association constants K_a for high‐affinity sites and high‐affinity site densities, in contrast with the previous reports (e.g., nitroxide/iniferter‐mediated “bulk” polymerization provided MIPs with improved properties). This is tentatively ascribed to the occurrence of rather fast gelation process in ATRBP, which greatly restricted the mobility of the chemical species, leading to a heavily interrupted equilibrium between dormant species and active radicals and heterogeneous polymer networks. In addition, the general applicability of ATRBP was also confirmed by preparing MIPs for different templates. This work clearly demonstrates that applying controlled radical polymerizations (CRPs) in molecular imprinting not always benefits the binding properties of the resultant MIPs, which is of significant importance for the rational use of CRPs in generating MIPs with improved properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 532–541, 2010     

马尿酸分子印迹电化学传感器的制备及应用

采用超声法制备g-C3N4/NiO复合催化材料,将其滴涂在玻碳电极(GCE)表面构建g-C3N4/NiO/GCE催化电极。采用电聚合方法,以马尿酸为模板分子,邻苯二胺为功能单体构建M IP/g-C3N4/NiO/GCE传感器。采用时间-电流法对传感器制备条件优化。结果表明,复合催化材料对H2O2具有良好的催化效果。分子印迹传感器对马尿酸具有良好的选择性。在优化条件下,马尿酸质量浓度在0.05~2 mg/L范围内,电极电流响应与浓度呈良好的线性关系,检出限为7.1μg/L。将电极用于尿液中马尿酸的检测,回收率在87.3%~95.3%之间。     

二苯并噻吩分子印迹功能化MOF199吸附剂的制备及性能

结合分子印迹技术,MOF199为基体,以二苯并噻吩(DBT)为模板分子,甲基丙烯酸(MAA)为功能单体,制备了新型表面分子印迹聚合物材料MOF@SMIP。采用SEM、BET、FT-IR等对其结构和形貌进行表征,在模拟油样中进行吸附评测,吸附平衡时间为1.5 h。MOF@SMIP对DBT吸附量为130.73 mg/g较MOF199吸附量37.79 mg/g有很大提升,同时MOF@SMIP吸附量对比MOF@NIP吸附量(57.13 mg/g)优势明显,印记因子f_(imp)为2.29。吸附行为遵循伪一阶动力学模型说明吸附主要为物理过程。选择性吸附实验表明,MOF@SMIP对目标分子DBT表现出比对结构类似物苯并噻吩(BT)和联苯更高的亲和力,吸附DBT对干扰物BT和联苯的相对选择系数k'分别达到2.55和2.14。     

New Photocleavable Structures, 4

As highly reactive acylphosphine oxide‐based photoinitiators (PIs) are limited in the application for dental materials by their absorption behavior, we were interested to prepare acylgermane 1 . UV‐Vis absorption maximum of the important n–π* transition was red shifted about 30 nm compared to monoacylphosphine oxides. Photo‐DSC results with a dental LED lamp showed nearly the same reactivity for 1 compared to camphorquinone (CQ), while monoacylphosphine oxides are not reactive. In broadband irradiation experiments, significantly higher reactivity compared to CQ was found. Application‐oriented tests showed sufficient storage stability of the formulation and excellent photobleaching behavior.

     

表面分子印迹材料的制备及在生物分子分离分析中的应用

表面分子印迹技术是一种新型的分子印迹技术,其解决了传统印迹方法得到的印迹聚合物模板结合位点少、洗脱困难、色谱性能和机械性能差等问题。表面分子印迹聚合物(SMIPs)以其稳定性好、特异性高及实用性强的特点,近年来在生物分子分离分析中的应用引起人们的关注。本文介绍了SMIPs的制备方法,比较了不同方法的优缺点,并对其在生物大分子、生物小分子及微生物分子分离分析中的应用进行了综述。     

A novel ion‐imprinted hydrogel for recognition of potassium ions with rapid response

A novel ion‐imprinted strategy is developed for synthesizing responsive hydrogels with rapid response to potassium ions. With potassium ions as templates, ion‐imprinted poly(N‐isopropylacrylamide‐co‐benzo‐15‐crown‐5‐acrylamide) (P(NIPAM‐co‐B15C5Am)) hydrogels are synthesized with 15‐crown‐5 crown ethers mounted on the polymer networks in pairs; therefore, it is very easy and fast for the crown ethers to capture potassium ions again by their Venus flytrap action and form stable 2:1 “host–guest” complexes with potassium ions in the ion‐recognition process. As a result, the response rate of the ion‐imprinted hydrogels to potassium ions is significantly faster than that of normal P(NIPAM‐co‐B15C5Am) hydrogels in which 15‐crown‐5 crown ethers are randomly pendent on the polymeric networks. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and catalytic performances of a molecularly imprinted Ru-complex catalyst with an NH2 binding site on a SiO2 surface

A catalyst surface with an active metal site, a shape-selective reaction space, and an NH(2) binding site for o-fluorobenzophenone was designed and prepared by the molecular imprinting of a supported metal complex on a SiO(2) surface. A ligand of a SiO(2)-supported Ru complex that has a similar shape to the product of o-fluorobenzophenone hydrogenation was used as a template. An NH(2) binding site for o-fluorobenzophenone was spatially arranged on the wall of a molecularly imprinted cavity with a similar shape to the template. The structures of the SiO(2)-supported and molecularly imprinted Ru catalysts were characterized in a step-by-step manner by means of solid-state magic angle spinning (MAS) NMR, XPS, UV/Vis, N(2) adsorption, XRF, and Ru K-edge EXAFS. The molecularly imprinted Ru catalyst exhibited excellent shape selectivity for the transfer hydrogenation of benzophenone derivatives. It was found that the NH(2) binding site on the wall of the molecularly imprinted cavity enhanced the adsorption of o-fluorobenzophenone, of which the reduction product was imprinted, whereas there was no positive effect in the case of o-methylbenzophenone, which cannot interact with the NH(2) binding site through hydrogen bonding.     

Preparation of high selective molecularly imprinted polymers for tetracycline by precipitation polymerization

High selective molecularly imprinted polymers(MIPs) for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent,the ratio of monomer and template and the characterization of the polymer were investigated by frontal chromatography and selectivity experiment.The results clearly indicated that the polymer,which had the highest molecular recognition abilities for tetracycline antibiotics,had been received.     

丹酚酸A分子印迹聚合物制备及识别性能研究

以丹酚酸A为模板分子,丙烯酰胺(AM)、α-甲基丙烯酸(MAA)、2-乙烯基吡啶(2-VP)和4-乙烯基吡啶(4-VP)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,丙酮、乙酸乙酯、乙腈和甲醇为致孔剂,采用本体聚合法制备了一系列丹酚酸A分子印迹聚合物.通过静态平衡吸附实验和选择性实验考察了印迹聚合物的吸附性能...     

Preparation and characterization of monodisperse molecularly imprinted polymers for the recognition and enrichment of oleanolic acid

Monodisperse molecularly imprinted polymers for oleanolic acid were successfully prepared by a precipitation polymerization method using oleanolic acid as a template, methacrylic acid as a functional monomer, and divinylbenzene/ethylene glycol dimethacrylate as a crosslinker in a mixture of acetonitrile and ethanol (3:1, v/v). The imprinted polymers and nonimprinted polymers were characterized by using scanning electron microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The resulting imprinted polymers had average diameters of 3.15 μm and monodispersity values of 1.024. The results clearly demonstrate that use of ethanol as a cosolvent is indeed exceedingly effective in promoting the dissolution of oleanolic acid and in obtaining uniform microspheres. Molecular recognition properties and binding capability to oleanolic acid were evaluated by adsorption testing, which indicated that the imprinted polymers displayed optimal binding performance with a maximum adsorption capacity of 17.3 mg/g and a binding saturation time of 80 min. Meanwhile, the produced imprinted polymers exhibited higher selectivity to oleanolic acid than that for ursolic acid and rhein. Herein, the studies can provide theoretical and experimental references for the oleanolic acid molecular imprinted system.     

Preparation and characterization of molecularly imprinted microspheres for dibutyl phthalate recognition in aqueous environment

Molecularly imprinted microspheres (MIMs) were prepared by suspension polymerization for the binding and recognition of dibutyl phthalate (DBP). DBP was used as the template molecule, methacrylic acid as the functional monomer, ethylene dimethacrylate (EDMA) as the linking agent, PVA as the dispersing agent, and Span 60 as the surfactant. The MIMs were characterized with electron microscope scanning and rebinding experiments. The Scatchard plot revealed that the template‐polymer system has a two‐site binding behavior with dissociation constants of 4.05 and 0.515 mmol/L. The MIMs exhibited the highest selective rebinding to DBP at 736.85 μg/g. The recoveries of the MIM‐SPE column for DBP extraction was 94.75–101.9% with the RSD of 1.5–7.3%, indicating the feasibility of the prepared MIMs for DBP extraction. Finally, the method developed was used to analyze the trace levels of phthalate in aqueous environment samples.