Chain transfer for vinyl monomers polymerized in N-allylstearamide

Apparent transfer constants have been determined for styrene, methyl methacrylate vinyl acetate, and diethyl maleate polymerized in N-allylstearamide at 90°C. Regression coefficients for transfer were: methyl methacrylate, 0.301 × 10^?3; styrene, with no added initiator, 0.582 × 10^?3; styrene, initiated with benzoyl peroxide, 0.830 × 10^?3; vinyl acetate, 62.01 × 10^?3; and diethyl maleate, 2.24 × 10^?3. Rates of polymerization were retarded for both styrene and methyl methacrylate. Vinyl monomer and comonomer disappearance followed an increasing exponential dependence on both initiator and monomer concentration. Although degradative chain transfer probably caused most of the retardation, the cross-termination effect was not eliminated as a contribution factor. Rates for the vinyl acetate copolymerization were somewhat retarded, even though initiator consumption was large because of induced decomposition. The kinetic and transfer data indicated that the reactive monomers added radicals readily, but that rates were lowered by degradative chain transfer. Growing chains were terminated at only moderate rates of transfer. Unreactive monomers added radicals less easily, producing reactive radicals, which transferred rapidly, so that molecular weights were lowered precipitously. Although induced initiator decomposition occurred, rates were still retarded by degradative chain transfer. A simple empirical relation was found between the reciprocal number-average degree of polymerization, 1/X?_n1 and the mole fraction of allylic comonomer entering the copolymer F₂, which permitted estimation of the molecular weight of copolymers of vinyl monomers with allylic comonomers. This equation should be applicable when monomer transfer constants for each homopolymer are known and when osmometric molecular weights of one or two copolymers of low allylic content have been determined.     

Thiol‐ene photopolymerization for efficient curing of vinyl esters

Monomers for radical photopolymerization based on vinyl esters (VEs) have recently been identified as suitable alternatives to (meth)acrylates on account of their low irritancy and cytotoxicity. The drawback of most VEs with abstractable hydrogens is their relatively low reactivity compared with (meth)acrylates. Within this article, we proved by photo‐differential scanning calorimetry measurements and real‐time Fourier transform infrared spectroscopy that the thiol‐ene concept is able to improve the photoreactivity of these VEs to a large extent to a level between those of acrylates and methacrylates. Other VEs have now a reactivity of at least the level of similar acrylates. Mechanical properties as determined by Dynamic Mechanical Analysis and Charpy impact tests showed significant toughening of these materials. Furthermore, we were able to confirm low toxicity of all components by osteoblast cell culture experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Novel dialkyl vinyl ether phosphonate monomers: Their synthesis and alternated radical copolymerizations with electron‐accepting monomers

Three new vinyl ether monomers containing phosphonate moieties were synthesized from transetherification reaction. We showed that the yield was dependent on the spacer length between the vinyl oxy group and the phosphonate moieties: when the spacer is a single methylene side reaction may occur, leading to the formation of acetal compounds. Free‐radical copolymerizations of phosphonate‐containing vinyl ether monomers with maleic anhydride were carried out, leading to alternated copolymers of rather low molecular weights (from 1000 to 7000 g/mol). Both gel permeation chromatography and ³¹P NMR analyses enhanced possible intramolecular transfer reactions occurring from the phosphonate moieties. Kinetic investigation showed that the electron‐withdrawing character of the phosphonate moieties tends to decrease the rate of copolymerization. Nevertheless, almost complete monomers conversion was reached after 30 min of reaction with dimethyl vinyloxyethylphosphonate (VEC₂PMe). Then, radical copolymerization of VEC₂PMe with a series of electron‐accepting monomers, that is, dibutyl maleate, dibutylitaconate, itaconic anhydride, butyl maleimide, and methyl maleimide, led to a series of alternated copolymers. From kinetic investigation, we showed that the higher the electron‐accepting effect, the faster the vinyl ether consumption and the higher the molecular weights. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fluorinated vinyl ethers as new surface agents in the photocationic polymerization of vinyl ether resins

The syntheses of fluorinated vinyl ethers (H₂C?CHOCH₂CH₂C_nF_2n+1, n = 6 or 8) and their copolymerizations with bis(4‐vinyloxybutyl) isophthalate are reported. The fluorinated monomers were prepared by the transetherification of ethyl vinyl ether and fluorinated alcohols in a 75% yield. Added in low concentrations (0.1–3.0 wt %) to formulations containing bis(4‐vinyloxybutyl) isophthalate, they did not affect the kinetics of the cationic photopolymerization. The cured films were transparent and showed interesting properties in terms of wettability, hardness, cross‐cut adhesion, and chemical inertness. The fluoromonomers increased the hydrophobicity of the film surface, whereas the adhesion on various substrates such as glass and wood was unchanged. An increase in the methyl ethyl ketone resistance was also observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2890–2897, 2003     

High‐throughput kinetic analysis of acrylate and thiol‐ene photopolymerization using temperature and exposure time gradients

In this work, a high‐throughput technique for evaluating photopolymers is developed to enable simultaneous measurement of the effects of temperature in combination with exposure time. Temperature and exposure time gradients were produced in orthogonal directions on a single sample, and subsequently sampled using Fourier transform infrared (FTIR) spectroscopy. The technique developed here allows for photopolymerization kinetics to be analyzed rapidly over a large range of industrially relevant temperatures, giving insight into the role temperature and the polymer's glass transition temperature have in dictating the photopolymerization kinetics. In the 70/30 wt % hexyl acrylate and hexanediol diacrylate system, conversion in samples below the glass transition temperature (T_G) was 66 ± 2% after 12 s, significantly lower than the 93 ± 4% conversion at 12 s for samples polymerized at temperatures above the T_G. In addition, a thiol‐ene system was analyzed to study the effect of temperature on the ene homopolymerization in allyl ether monomers, which leads to incomplete thiol conversion in stoichiometrically balanced systems. At a 60% thiol conversion, the allyl ether‐ene conversion at all temperatures is 65 ± 3% irrespective of initial formulation temperature, indicative of the homopolymerization behavior being nearly independent of temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1502–1509, 2008     

Synthesis of poly(vinyl ether) polyols with pendant oxyethylene chains and properties of hydrophilic,thermo‐responsive polyurethanes prepared therefrom

Hydroxy‐terminated telechelic poly(vinyl ether)s with pendant oxyethylene chains were synthesized by the reaction of the CH₃CH(OCOCH₃)? O[CH₂]₄O? CH(OCOCH₃)CH₃/Et_1.5AlCl_1.5/THF‐based bifunctional living cationic polymers of 2‐methoxyethyl vinyl ether (MOVE), 2‐ethoxyethyl vinyl ether (EOVE), and 2‐(2‐methoxyethoxy)ethyl vinyl ether (MOEOVE) with water and the subsequent reduction of the aldehyde polymer terminals with NaBH₄. The obtained poly(vinyl ether) polyols were reacted with an equimolar amount of toluene diisocyanates [a mixture of 2,4‐ (80%) and 2,6‐ (20%) isomers] to give water‐soluble polyurethanes. The aqueous solutions of these polyurethanes caused thermally induced precipitation at a particular temperature depending on the sort of the thermosensitive poly(vinyl ether) segments containing oxyethylene side chains. These polyurethanes also function as polymeric surfactants, lowered the surface tension of their aqueous solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1641–1648, 2010     

Synthesis and characterization of original alternated fluorinated copolymers bearing glycidyl carbonate side groups

A vinyl ether bearing a carbonate side group (2‐oxo‐1,3‐dioxolan‐4‐yl‐methyl vinyl ether, GCVE) was synthesized and copolymerized with various commercially available fluoroolefins [chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and perfluoromethyl vinyl ether (PMVE)] by radical copolymerization initiated by tert‐butyl peroxypivalate. Although HFP, PMVE, and vinyl ether do not homopolymerize under radical conditions, they copolymerized easily yielding alternating poly(GCVE‐alt‐F‐alkene) copolymers. These alternating structures were confirmed by elemental analysis as well as ¹H, ¹⁹F, and ¹³C NMR spectroscopy. All copolymers were obtained in good yield (73–85%), with molecular weights ranging from 3900 to 4600 g mol^?1 and polydispersities below 2.0. Their thermogravimetric analyses under air showed decomposition temperatures at 10% weight loss (T_d,10%) in the 284–330°C range. The HFP‐based copolymer exhibited a better thermal stability than those based on CTFE and PMVE. The glass transition temperatures were in the 15–65°C range. These original copolymers may find potential interest as polymer electrolytes in lithium ions batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Initiation mechanisms in copolymerization: Reaction of t-butoxyl radicals with co-monomers ethyl vinyl ether and methyl methacrylate

The radical trapping technique employing 1,1,3,3-tetramethyl-1,3-dihydro-1H-isoindol-2-yloxyl as a scavenger has been used to investigate the reaction of t-butoxyl radicals with mixtures of ethyl vinyl ether and methyl methacrylate. The range of identified products includes those from both addition and hydrogen abstraction with both monomers, head addition with ethyl vinyl ether, and some second monomer addition products. Relative rate constants have been obtained for various pairs of constituent reactions. t-Butoxyl radicals add to ethyl vinyl ether one to two times faster than to methyl methacrylate, depending on which monomer is in excess. The ratio is less than 1 in nonolefinic solvents and as high as 6 in t-butanol. This solvent effect is thought to be due to the radicals complexing to either methyl methacrylate or t-butanol (H-bonding), thereby increasing its electrophilic character. © 1997 John Wiley & Sons, Inc.     

Products of the gas‐phase reactions of the OH radical with n‐butyl methyl ether and 2‐isopropoxyethanol: Reactions of ROC(Ȯ) < radicals

The products of the gas‐phase reactions of the OH radical with n‐butyl methyl ether and 2‐isopropoxyethanol in the presence of NO have been investigated at 298 ± 2 K and 740 Torr total pressure of air by gas chromatography and in situ atmospheric pressure ionization tandem mass spectrometry. The products observed from n‐butyl methyl ether were methyl formate, propanal, butanal, methyl butyrate, and CH₃C(O)CH₂CH₂OCH₃ and/or CH₃CH₂C(O)CH₂OCH₃, with molar formation yields of 0.51 ± 0.11, 0.43 ± 0.06, 0.045 ± 0.010, ∼0.016, and 0.19 ± 0.04, respectively. Additional products of molecular weight 118, 149 and 165 were observed by API‐MS/MS analyses, with those of molecular weight 149 and 165 being identified as organic nitrates. The products observed and quantified from 2‐isopropoxyethanol were isopropyl formate and 2‐hydroxyethyl acetate, with molar formation yields of 0.57 ± 0.05 and 0.44 ± 0.05, respectively. For both compounds, the majority of the reaction products and reaction pathways are accounted for, and detailed reaction mechanisms are presented. The results of this product study are combined with previous literature product data to investigate the tropospheric reactions of R₁R₂C(Ȯ)OR radicals formed from ethers and glycol ethers, leading to a revised estimation method for the calculation of reaction rates of alkoxy radicals. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 501–513, 1999     

Rapid living cationic polymerization of vinyl ethers by a single‐molecular initiating system

Initiated by an organic molecule trifluoromethanesulfonimide (HNTf₂) without any Lewis acid or Lewis base stabilizer, cationic polymerization of isobutyl vinyl ether (IBVE) takes place rapidly and the polymerization is proved to be in a controlled/living manner. The conversion of IBVE could easily achieve 99% in seconds. The product poly(isobutyl vinyl ether) is narrowly distributed and its molecular weight increases linearly with time and fits well with the corresponding theoretical value. This single‐molecular initiating system also works well in the living cationic polymerization of ethyl vinyl ether. HNTf₂ is considered playing multiple roles which include initiator, activator, and stabilizer in the polymerization. It is quite different from the hydrogen halide‐catalyzed polymerizations of vinyl ethers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1373‐1377     

Kinetics and mechanism of the atmospheric oxidation of Ethyl tertiary butyl ether

Ethyl tertiary butyl ether (ETBE) is being proposed as an additive for use in reformulated gasolines. In this study, experiments were performed to examine the kinetics and mechanism of the atmospheric removal of ETBE. The kinetics of the reaction of ETBE with OH radicals were examined by using a relative rate technique with the photolysis of methyl nitrite to generate OH radicals. With n-hexane as the reference compound, a value of (9.73 ± 0.33) × 10^?12 cm³ molecule^?1 s^?1 was obtained for the rate constant. The OH rate constant for t-butyl acetate, a product of the oxidation of ETBE, was (4.4 ± 0.4) × 10^?13 cm³ molecule^?1 s^?1 at 298 K. The primary products and molar yields for the OH reaction with ETBE in the presence of NO_x were t-butyl formate (0.64 ± 0.03), t-butyl acetate (0.13 ± 0.01), ethyl acetate (0.043 ± 0.003), acetaldehyde (0.16 ± 0.01), acetone (0.019 ± 0.002), and formaldehyde (0.53 ± 0.04). Under the described reaction conditions, the formation of t-butyl nitrite was also observed. From these molar yields, approximately 98% of the reacted ETBE could be accounted for by paths leading to these products. Chemical mechanisms to explain the formation of these products are presented.     

Radical copolymerization of novel trifluorovinyl ethers with ethyl vinyl ether and vinyl acetate: Estimating reactivity ratios and understanding reactivity behavior of the propagating radical

Two novel trifluorovinyl ether (TFVE) monomers were copolymerized with either ethyl vinyl ether (EVE) or vinyl acetate (VAc) in a redox‐initiated aqueous emulsion: 1‐(2‐phenoxyethoxy)‐1,2,2‐trifluoroethene (Ph‐TFVE) and 1‐[2‐(2‐ethoxyethoxy)ethoxy]‐1,2,2‐trifluoroethene (Et‐TFVE). Previous studies demonstrated a propensity for radical hydrogen abstraction from the oligoether pendant group during the homopolymerization of Et‐TFVE with continued propagation of the resulting radical, thereby providing the rationale to investigate the copolymerization of our new TFVEs with EVE or VAc. Reactivity ratios were estimated using the error‐in‐variables model from a series of bulk free radical copolymerizations of Ph‐TFVE with EVE or VAc. The reactivity ratios were r_Ph‐TFVE = 0.25 ± 0.07, r_EVE = 0.016 ± 0.04; r_Ph‐TFVE = 0.034 ± 0.04, r_VAc =0.89 ±0.08. Partial hydrolysis of polymers containing VAc to vinyl alcohol (VA) resulted in two terpolymers: poly(Ph‐TFVE‐co‐VAc‐co‐VA) and poly(Et‐TFVE‐co‐VAc‐co‐VA), respectively. We investigated the possibility of hydrogen abstraction from VAc during polymerization by comparing the molar mass before and after hydrolysis. Abstraction from VAc was not apparent during polymerization; however, abstraction from the oligoether pendant group of Et‐TFVE was again evident and was more significant for those copolymers having a greater fraction of Et‐TFVE in the monomer feed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1344–1354, 2000     

Meroterpenoids—III : Psoralea corylifolia linn.—3. Synthesis of (±)-bakuchiol methyl ether

A synthesis of (±)-bakuchiol methyl ether, involving Claisen rearrangement of geranyl vinyl ether as the key step, is described. Further thermal reorganisation of the intermediate 3-vinyl-citronellal is discussed.     

Photooxidation of blends of polystyrene and poly (vinyl methyl ether)

Photooxidation of blends of polystyrene and poly (vinyl methyl ether) was studied at 30°C. The oxygen uptake by PS was negligible but PVME oxidized readily. The induction period of oxidation of PVME was prolonged by the presence of PS. The steady state rate of oxidation of the blend was strongly influenced by the segmental mobility of the blend which also governed the kinetics and morphology of phase separation. The molecular weight of PVME decreased more slowly in the blend as PS content increased. It was believed that the reaction between PVME radicals and PS resulted in less reactive PS radicals which retarded oxidation. The PS radicals eventually underwent chain scission reactions.     

Polymerization of vinyl ethers with transition‐metal catalysts: An examination of the stereoregularity of the formed polymers

The polymerization of isobutyl vinyl ether (IBVE) and tert‐butyl vinyl ether (TBVE) was carried out with metallocene and nonmetallocene catalysts, and the stereoregularity of the formed polymers was examined with ¹³C NMR spectroscopy. IBVE afforded polymers with 63–68% dyad isotacticity by polymerization with mixtures of metallocene catalysts and methyl aluminoxane as a cocatalyst in toluene as a solvent. However, TBVE yielded polymers with 47–52% dyad isotacticity (21–28% triad isotacticity) under the same conditions, the isotacticity being lower than that of poly(isobutyl vinyl ether) (PIBVE). Nonmetallocene catalysts, including Ti, Zr, and Hf complexes with two phenoxy imine chelate ligands, provided PIBVE and poly(tert‐butyl vinyl ether) with 63–68 and 45–51% dyad isotacticity, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3938–3943, 2002     

Photoinitiated curing of mono‐ and bifunctional epoxides by combination of active chain end and activated monomer cationic polymerization methods

Photoinitiated cationic polymerization of mono‐ and bifunctional epoxy monomers, namely cyclohexeneoxide (CHO), 4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexanecarboxylate (EEC), respectively by using sulphonium salts in the presence of hydroxylbutyl vinyl ether (HBVE) was studied. The real‐time FTIR spectroscopic, gel content determination, and thermal characterization studies revealed that both hydroxyl and vinyl ether functionalities of HBVE take part in the polymerization. During the polymerization, HBVE has the ability to react via both active chain end (ACE) and activated monomer mechanisms through its hydroxyl and vinyl ether functionalities, respectively. Thus, more efficient curing was observed with the addition of HBVE into EEC‐containing formulations. It was also demonstrated that HBVE is effective in facilitating the photoinduced crosslinking of monofunctional epoxy monomer, CHO in the absence of a conventional crosslinker. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4914–4920, 2007     

Kinetics of free-radical polymerization of p-vinylbenzyl methyl ether: Crosslinking by initiator free radicals

Kinetics of polymerization of p-vinylbenzyl methyl ether at low conversion either in bulk or in benzene have been found to be quite similar to those of the unsubstituted monomer styrene. Rates of polymerization initiated by peroxides or α,α′-azobisisobutyronitrile over the temperature range 50–70°C. have been found to be proportional to [Monomer][Initiator]^1/2 with an activation energy difference E_propagation – 1/2 E_termination ≈ 6 kcal./mole. Azo initiation leads to essentially unbranched poly(vinyl-benzyl methyl ether) even at very high conversions, whereas initiation of undiluted monomer by diacyl peroxides results in some crosslinking at high conversion. Use of biacetyl as a photoinitiator of polymerization over the temperature range 0–60°C. with either bulk monomer or monomer solutions in benzene has been found in each instance to yield crosslinked, insoluble polymers at low degrees of conversion. Benzene solutions of soluble polymer have been converted to high molecular weight branched polymers by free radicals generated by photolysis of biacetyl, and a substantial preference of methyl free radicals to abstract benzyl hydrogens of poly(p-vinylbenzyl methyl ether) rather than add to solvent benzene has been observed.     

High Tg microspheres by dispersion copolymerization of N‐phenylmaleimide with styrenic or alkyl vinyl ether monomers

Solution and dispersion copolymerizations of N‐phenylmaleimide (PMI) with either styrenics or alkyl vinyl ethers (AVEs), systems with a tendency to give alternating polymers, were investigated with the goal of producing high glass transition particles. Equimolar solution copolymerization of PMI with styrenics gave alternating copolymers, whereas AVEs gave PMI‐rich copolymers (～65:35) except for t‐butyl vinyl ether, which gave copolymers with only a slight excess of PMI. These copolymers had glass transition temperatures (T_gs) ranging from 115 to 225 °C depending on comonomer(s). Dispersion copolymerization in ethanol‐based solvents in the presence of poly(vinylpyrrolidone) as steric stabilizer led to narrow‐disperse microspheres for many copolymers studied. Dispersion copolymeriations of PMI with styrenics required good cosolvents such as acetonitrile or methyl ethyl ketone as plasticizers during particle initiation and growth. Dispersion copolymerizations generally resulted in copolymer particles with compositions and T_gs very similar to those of the corresponding copolymers formed by solution polymerization, with the exception of t‐butyl vinyl ether (tBVE), which now behaved like the other AVEs. Dispersion terpolymerizations of PMI (50 mol %) with different ratios of either n‐butylstyrene and t‐butylstyrene or n‐butyl vinyl ether and tBVE led to polymer particles with T_gs that depended on the ratio of the two butyl monomers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Infrared spectroscopic study on the crystallization of water in poly(vinyl methyl ether) aqueous solution during heating

The Fourier transform infrared (FTIR) results are consistent with the differential scanning calorimetric results and verify the anomalous crystallization of water in 50% poly(vinyl methyl ether) aqueous solution during heating. Below about ?34 °C, the water/polymer complex was not damaged, and the water still associated with the polymer. When heating to about ?34 °C, the associated water started to free from the unpolar (methyl group) and polar‐site (ether‐oxygen group) interaction fields of polymer gradually. Then crystallization of water was induced in this system at temperatures ranging from ?34 to ?24 °C. The FTIR data also indicate that the structure of water started to change first upon forming strong H bonds among water molecules, and then the dehydration of the polymer began to proceed subsequently when the anomalous crystallization of water occurred. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2772–2779, 2002