Resonant soft x‐ray scattering and reflectivity study of the phase‐separated structure of thin poly(styrene‐b‐methyl methacrylate) films

Combined soft X‐ray scattering and reflectometry techniques promise analysis of polymer thin film domain structure and composition without resorting to chemical modification or isotopic labeling. This work explores the capabilities of these techniques in polymer films of poly(styrene‐b‐methyl methacrylate) (P(S‐b‐MMA)). The results demonstrate that the techniques give detailed information on the domain structure of thin films using well‐known modeling procedures. Discrepancies were noted between the X‐ray optical parameters that are needed to best fit the reflectivity data to the model and the expected parameters. The sources of these discrepancies are discussed in terms of instrument configuration parameters, sample attributes, and, particularly, anisotropy of the chromophore parameters. The results show that fitting the soft X‐ray reflectivity data is much more sensitive to these X‐ray optical parameters than the soft X‐ray scattering data. Nevertheless, fits to both types of data yield quantitative measures of the polymer film's lamellar morphology that are consistent with each other and with literature values. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

Structures of X 34‐nylons in chain‐folded lamellae and gel‐spun fibers

Structural studies and morphological features of a new family of linear, aliphatic even–even, X 34‐nylons, with X = 2, 4, 6, 8, 10, and 12, are investigated with X‐ray diffraction and electron microscopy. Solution‐grown crystals were obtained by isothermal crystallization from N,N‐dimethylformamide solutions. The thickness of lamellar‐like crystals was orders of magnitude less than the chain lengths of the polymer samples used, implying that the chains fold to form chain‐folded lamellae. The results bear a close resemblance, with the noticeable exception of 2 34‐nylon, to those reported for nylon 6 6 and other even–even nylon chain‐folded lamellar crystals. The basic structure of the straight‐stem lamellar core is similar to that of the classic nylon 6 6 triclinic α structure, and the chains tilt ≈42° relative to the lamellar normal. In the case of 2 34‐nylon, the structure resembles the 2 Y nylon series, and the chain tilt angle reduces to 36.6°. These combined results suggest that, even with a relatively low frequency of amide units along the backbone of these molecules, hydrogen bonding is still the dominant element in controlling the behavior, structure, and properties of these polymers. In addition, gels were prepared in concentrated sulfuric acid, and gel‐spun fibers were studied using X‐ray diffraction. The data are interpreted in terms of a modified nylon triclinic α structure that bears a resemblance to the structure of even–even nylons at elevated temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2685–2692, 2002     

A Diacetylene‐Containing Wedge‐Shaped Compound: Synthesis,Morphology, and Photopolymerization

A novel wedge‐shaped compound containing two diacetylene tails, namely, methyl 3,5‐bis(trideca‐2,4‐diyn‐1yloxyl)benzoate (DDABM), was synthesized. As shown by UV/Vis spectroscopy this compound can be polymerized under UV irradiation. The crystalline structure of DDABM was investigated by grazing‐incidence wide‐angle X‐ray diffraction on oriented crystalline films deposited on PTFE‐rubbed silicon wafer substrates. Furthermore, the spherulites formed in thicker films were analyzed by wide‐angle X‐ray diffraction. A molecular packing model of DDABM based on the X‐ray diffraction data is proposed. The diacetylene units are oriented along a defined lattice direction with a reticular distance of 4.85 Å, which fulfills the requirements for topochemical polymerization. It was observed that UV polymerization does not affect the phase behavior of the compound, but mainly alters its optical properties.     

Spectroscopic Characteristics of Differently Produced Single‐Walled Carbon Nanotubes

Single‐walled carbon nanotubes (SWNTs) synthesized with different methods are investigated by using multiple characterization techniques, including Raman scattering, optical absorption, and X‐ray absorption near edge structure, along with X‐ray photoemission by following the total valence bands and C 1s core‐level spectra. Four different SWNT materials (produced by arc discharge, HiPco, laser ablation, and CoMoCat methods) contain nanotubes with diameters ranging from 0.7 to 2.8 nm. The diameter distribution and the composition of metallic and semiconducting tubes of the SWNT materials are strongly affected by the synthesis method. Similar sp² hybridization of carbon in the oxygenated SWNT structure can be found, but different surface functionalities are introduced while the tubes are processed. All the SWNTs demonstrate stronger plasmon resonance excitations and lower electron binding energy than graphite and multiwalled carbon nanotubes. These SWNT materials also exhibit different valence‐band X‐ray photoemission features, which are considerably affected by the nanotube diameter distribution and metallic/semiconducting composition.     

Chemical Speciation and Bond Lengths of Organic Solutes by Core‐Level Spectroscopy: pH and Solvent Influence on p‐Aminobenzoic Acid

Through X‐ray absorption and emission spectroscopies, the chemical, electronic and structural properties of organic species in solution can be observed. Near‐edge X‐ray absorption fine structure (NEXAFS) and resonant inelastic X‐ray scattering (RIXS) measurements at the nitrogen K‐edge of para‐aminobenzoic acid reveal both pH‐ and solvent‐dependent variations in the ionisation potential (IP), 1s→π* resonances and HOMO–LUMO gap. These changes unequivocally identify the chemical species (neutral, cationic or anionic) present in solution. It is shown how this incisive chemical state sensitivity is further enhanced by the possibility of quantitative bond length determination, based on the analysis of chemical shifts in IPs and σ* shape resonances in the NEXAFS spectra. This provides experimental access to detecting even minor variations in the molecular structure of solutes in solution, thereby providing an avenue to examining computational predictions of solute properties and solute–solvent interactions.     

Characterizing the Intermediates Compound I and II in the Cytochrome P450 Catalytic Cycle with Nonlinear X‐ray Spectroscopy: A Simulation Study

Cytochrome P450 enzymes are an important family of biocatalysts that oxidize chemically inert C?H bonds. There are many unresolved questions regarding the catalytic reaction intermediates, in particular P450 Compound I (Cpd‐I) and II (Cpd‐II). By using simple molecular models, we simulate various X‐ray spectroscopy signals, including X‐ray absorption near‐edge structure (XANES), resonant inelastic X‐ray scattering (RIXS), and stimulated X‐ray Raman spectroscopy (SXRS) of the low‐ and high‐spin states of Cpd‐I and II. Characteristic peak patterns are presented and connected to the corresponding electronic structures. These X‐ray spectroscopy techniques are complementary to more conventional infrared and optical spectroscopy and they help to elucidate the evolving electronic structures of transient species along the reaction path.     

The Hydrogen Bond of Water from the Perspective of Soft X‐Ray Spectroscopy

Its importance for life and its unusual properties keep water within the focus of ongoing research; this focus especially applies to water in the liquid phase. Scientists agree that the hydrogen‐bond network, which is formed by interactions between the water molecules, is key for understanding the anomalies of water. However, a better understanding of the structure of this network, as well as its dynamics, must yet be established. Soft X‐ray spectroscopy allows the investigation of the local electronic structure of water by probing the occupied and unoccupied valence molecular orbitals. In this Focus Review, we present soft‐X‐ray‐based techniques, their development in terms of liquid spectroscopy, and recent studies on the hydrogen‐bond network of liquid water.     

Multilayer Film Fabrication Using Flow Injection Coupled with Electrochemical Deposition

A simple method is proposed for the electrodeposition of multilayers using a modified closed flow injection system. The apparatus incorporates flowing streams of electrolyte through a closed atmosphere flow cell for deposition of multilayers. Computer and software control is used to alternate the flow of electrolyte and control the alternating current or potential of the electrochemical cell. Electrodeposition of metallic multilayers of nickel/iron, iron/copper, cobalt/copper, and nickel/copper were used to test the instrument design. X‐ray diffraction was used to verify the composition and orientation of the films and scanning electron microscopy was used to examine the morphology of the deposited films. Advantages are discussed for using this type of instrumental setup for multilayer fabrication.     

The Charge of Solid–Liquid Interfaces Measured by X‐Ray Standing Waves and Streaming Current

Measurements of ion distributions at a charged solid–liquid interface using X‐ray standing waves (XSW) are presented. High energy synchrotron radiation (17.48 keV) is used to produce an XSW pattern inside a thin water film on a silicon wafer. The liquid phase is an aqueous solution containing Br and Rb ions. The surface charge is adjusted by titration. Measurements are performed over a pH range from 2.2–9, using the native Si oxide layer and functional (amine) groups as surface charge. The Debye length, indicating the extension of the diffuse layer, could be measured with values varying between 1–4 nm. For functionalized wafers, the pH dependent change from attraction to repulsion of an ion species could be detected, indicating the isoelectric point. In combination with the measurement of the streaming current, the surface charge of the sample could be quantified.     

Local Structure of ZnO Micro Flowers and Nanoparticles Obtained by Micro‐Segmented Flow Synthesis

The micro‐segmented flow technique was applied for continuous synthesis of ZnO micro‐ and nanoparticles with short residence times of 9.4 s and 21.4 s, respectively. The obtained particles were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Small angle X‐ray scattering (SAXS) and photoluminescence spectroscopy were used to determine the size and optical properties of ZnO nanoparticles. In addition, extended X‐ray absorption fine structure (EXAFS) spectroscopy was employed to investigate local structural properties. The EXAFS measurements reveal a larger degree of structural disorder in the nanoparticles than the microparticles. These structural changes should be taken into consideration while evaluating the size‐dependent visible emission of ZnO nanoparticles.     

The effect of localized lateral growth of multiwalled carbon nanotubes with ammonia plasma post‐treatment

We present horizontally‐oriented multiwalled carbon nanotubes (CNTs) grown by means of thermal chemical vapor deposition. The CNT is across the trenches of the catalytic metals on predefined Ti electrodes. The properties of the lateral multiwalled CNT, following post‐ammonia plasma treatment, are reported. Information about the ammonia plasma treated on the interface structure of CNT is obtained using X‐ray photoelectron spectroscopy. The experimental results show that upon exposure to ammonia, the electrical property of the CNT is found to increase. Copyright © 2012 John Wiley & Sons, Ltd.     

X‐Ray Diffraction as a Local Probe Tool

For the structural characterization of nanoscale objects, X‐ray diffraction is widely used as a technique complementing local probe analysis methods such as scanning electron microscopy and transmission electron microscopy. Details on strain distributions, chemical composition, or size and shape of nanostructures are addressed. X‐ray diffraction traditionally obtains very good statistically averaged properties over large ensembles—provided this averaging is meaningful for ensembles with sufficiently small dispersion of properties. In many cases, however, it is desirable to combine different analysis techniques on exactly the same nano‐object, for example, to gain a more detailed insight into the interdependence of properties. X‐ray beams focused to diameters in the sub‐micron range, which are available at third‐generation synchrotron sources, allow for such X‐ray diffraction studies of individual nano‐objects.     

Microsecond X‐ray Absorption Spectroscopy Identification of CoI Intermediates in Cobaloxime‐Catalyzed Hydrogen Evolution

Rational development of efficient photocatalytic systems for hydrogen production requires understanding the catalytic mechanism and detailed information about the structure of intermediates in the catalytic cycle. We demonstrate how time‐resolved X‐ray absorption spectroscopy in the microsecond time range can be used to identify such intermediates and to determine their local geometric structure. This method was used to obtain the solution structure of the Co^I intermediate of cobaloxime, which is a non‐noble metal catalyst for solar hydrogen production from water. Distances between cobalt and the nearest ligands including two solvent molecules and displacement of the cobalt atom out of plane formed by the planar ligands have been determined. Combining in situ X‐ray absorption and UV/Vis data, we demonstrate how slight modification of the catalyst structure can lead to the formation of a catalytically inactive Co^I state under similar conditions. Possible deactivation mechanisms are discussed.     

Oxidative Metalation as a Route to Size‐Mismatched Macrocyclic Complexes: Osmium Corroles

Heavy‐element corroles are of great interest as optical sensors, near‐IR dyes, phosphors, organic light‐emitting diodes, and anticancer compounds. Insertion of 5d metals into corroles, however, is often a difficult and unpredictable process. Against this backdrop, oxidative metalation of meso triarylcorroles with [Os₃(CO)₁₂]/NaN₃ in refluxing 1:2 diethylene glycol monomethyl ether/glycol has provided a convenient and relatively high‐yielding route to nitridoosmium(VI) corroles, three of which could be characterized with single‐crystal X‐ray structure analysis.     

Monte Carlo simulation of spatial distribution of X rays in multifilm targets. III: optimum design as applied to W/Al‐film targets

The brightness of the X‐ray source in a W/Al‐film target used for X‐ray projection microscopy was studied by an approach using the Monte Carlo simulation. Since continuous X rays generated in a thin film have a specific angular distribution of emission, the brightness of the continuous X‐ray source cannot simply be estimated on the assumption that the angular distribution is homogeneous. The newly developed approach using the Monte Carlo simulation enables the evaluation of the effective source size, angular distribution, and brightness of a continuous X‐ray source with sufficient accuracy that it leads to the optimum design of a high‐brightness X‐ray source for uses such as X‐ray projection microscopy. The Monte Carlo calculations were performed for W(Δz)/Al (200 µm)‐film targets with different thicknesses of W film, Δz, under bombardment of 60 kV electrons. The results have suggested an optimum design consisting of a W (2 µm)/Al (200 µm)‐film target as most promising for providing an X‐ray source of higher brightness than the W (5 µm)/Al (200 µm)‐film target, which has already been in practice for X‐ray projection microscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Structural polymorphism in poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide)

Structural characterization of poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide) was carried out with optical microscopy, thermal analysis, X‐ray diffraction, and electron microscopy. Two different crystalline forms were found in accordance with the thermograms, powder and fiber X‐ray diffraction diagrams. The electron microscopy allows corroboration of the morphological and crystallographic differences. Molecular modeling was used to conclude the structural analogies and differences between the two crystalline forms that were related to the chain packing and orientation in the crystal cell, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2523–2530, 2002     

ZnO thin films prepared on titanium substrate by PLD technique at different substrate temperatures

ZnO thin films were grown by pulsed laser deposition on titanium substrates at different substrate temperatures ranging from 300 to 700 °C. X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS),photoluminescence, and Raman spectroscopy are employed to investigate the change of properties. XRD, XPS, and Raman data showed that the films consisted of TiO₂ at high substrate temperature, which will deteriorate the crystallization quality of ZnO films. The optimum temperature for the growth of ZnO films on the Ti substrate is about 500 °C in this paper. The ZnO films grown on titanium substrate can be used in direct current, microwave, and medical applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of a simultaneous measurement system of x‐ray diffraction and raman spectra: Application to structural study of crystalline‐phase transitions of chain molecules

The development of a bench‐top‐type system for simultaneous measurement of X‐ray diffraction and Raman spectra has been made to investigate structural changes in the phase transitions of chain molecules such as polyethylene, n‐alkane, and so forth from various viewpoints. For the X‐ray diffraction measurement an imaging plate or a charge‐coupled device camera was used as a two‐dimensional detector. For the Raman spectral measurement a miniature Raman spectrometer was used with optical fibers for the irradiation of incident laser beams and collection of scattered signals. For example, in the heating process of the n‐C₃₀H₆₂ sample, the phase transition from orthorhombic‐to‐hexagonal lattices could be detected clearly by the X‐ray and Raman measurements. By comparing these two different types of data in detail, an intimate relationship between conformational disordering and rotational motion of molecular chains is detected more clearly than before. Also, similar discussion can be made for the orthorhombic‐to‐hexagonal phase transition of the geometrically constrained polyethylene sample occurring immediately below the melting point. Another example concerns the structural change in the photoinduced solid‐state polymerization of cis,cis‐diethylmuconate single crystal. From the shifts in the X‐ray reflection position and Raman frequency characteristic of the produced polymer, it was found that the molecular deformation of the polymer chains and lattice strain was induced in the early stage of the polymerization reaction. For the ferroelectric‐phase transition of vinylidene fluoride copolymer, the simultaneous measurement was made for collecting triple information of small‐angle and wide‐angle X‐ray scatterings and Raman spectra to know the relationship between the structural change in the crystal lattice and the morphological change in the lamellar stacking mode. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 495–506, 2002; DOI 10.1002/polb.10112