Living ring‐opening polymerization of lactides catalyzed by guanidinium acetate

Hexabutyl guanidinium acetate (HBG · OAc) was synthesized and successfully used as a catalyst for the ring‐opening polymerization (ROP) of lactides. The experimental results indicated that the guanidinium salt HBG · OAc showed satisfactory catalytic behavior. Polymerization in bulk (120 °C, 18 h) produced polylactides with moderate molecular weights (number‐average molecular weight = 2.0 × 10⁴) and very narrow molecular weight distributions (polydispersity index = 1.07–1.12). A kinetic study of polymerization in bulk with HBG · OAc as an initiator revealed that the polymerization possessed typical characteristics of living polymerization. A ROP mechanism by HBG · OAc was proposed on the basis of the additive effect of the polymerization and the ¹H NMR characterization of the microstructure of the product polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3775–3781, 2004     

Exploration of tertiary aminosquaramide bifunctional organocatalyst in controlled/living ring‐opening polymerization of l‐lactide

A series of tertiary aminosquaramides as bifunctional organocatalysts in the ring‐opening polymerization (ROP) of l ‐lactide (l ‐LA) were developed, allowing the activation of both the l ‐LA monomer and the alcohol group of the initiator/propagating species. Further, the impact of tertiary nitrogen substituents on catalytic activity in ROP of l ‐LA was explored. The tertiary aminosquaramide— an air‐stable and moisture‐stable catalyst—exhibited superior activity in contest with thiourea counterpart when both were equipped with a similar tertiary amine group. Kinetic and chain‐extension experiments indicated that the formed poly(l ‐LA) is featured with narrow polydispersity and high end‐group fidelity, hallmarks of a living polymerization process. The initiator efficiency was further executed at ease by preparation of an ABA triblock copolymer poly (l ‐LA)‐b‐poly (ethylene glycol)‐b‐poly (l ‐LA) in the presence of a dual‐headed PEG macroinitiator. ¹H NMR titration experiments suggested a bifunctional catalytic mechanism, wherein both the l ‐LA monomer and the propagating hydroxyl group were activated en route to polymerization. The ¹H NMR, SEC, and MALDI‐TOF MS measurements validated the quantitative incorporation of the initiator in the polymeric chains and enchainment over competitive trans‐esterification reaction. Overall, the structure‐activity relationships were surveyed to uncover aminosquaramide as a new bifunctional dual hydrogen‐bond donor catalyst for living ROP of l ‐LA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2483–2493     

Hydrogen‐bonding characteristics and unique ring‐opening polymerization behavior of Ortho‐methylol functional benzoxazine

Monofunctional benzoxazine with ortho‐methylol functionality has been synthesized and highly purified. The chemical structure of the synthesized monomer has been confirmed by ¹H and ¹³C nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FT‐IR) and elemental analysis. One‐dimensional (1D) ¹H NMR is used with respect to varied concentration of benzoxazines to study the specific nature of hydrogen bonding in both ortho‐methylol functional benzoxazine and its para counterpart. The polymerization behavior of benzoxazine monomer has been also studied by in situ FT‐IR and differential scanning calorimetry, experimentally supporting the polymerization mechanism of ortho‐methylol functional benzoxazine we proposed before. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3635–3642     

Controlled surface‐initiated ring‐opening polymerization of L‐lactide from risedronate‐anchored hydroxyapatite nanocrystals: Novel synthesis of biodegradable hydroxyapatite/poly(L‐lactide) nanocomposites

Risedronate‐anchored hydroxyapatite (HA‐RIS) nanocrystals were prepared with 4.1 wt % RIS and used for controlled surface‐initiated ring‐opening polymerization (ROP) of L ‐lactide (L ‐LA). The strong adsorption of RIS to HA surface not only led to enhanced dispersion of HA nanocrystals in water as well as in organic solvents but also provided alkanol groups as active initiating species for ROP of L ‐LA. HA‐RIS was characterized by thermogravimetric analysis, dynamic light scattering, ¹H NMR, Fourier transform infrared spectrometer, and X‐ray diffraction. The graft polymerization of L ‐LA onto HA‐RIS took place smoothly in the presence of stannous octoate in toluene at 120 °C, resulting in HA/poly(L ‐LA) nanocomposites with high yields of 85–90% and high poly(L ‐LA) contents of up to 97.5 wt %. Notably, differential scanning calorimetry measurements revealed that the poly(L ‐LA) in HA/poly(L ‐LA) nanocomposites exhibited considerably higher melting temperatures (T_m = 173.3?178.1 °C) and higher degrees of crystallinity (X_c = 41.0?43.1%) as compared to poly(L ‐LA) homopolymer (T_m = 168.5 °C, X_c =25.7%). In addition, our initial results showed that these HA/poly(L ‐LA) nanocomposites could readily be electrospun into porous matrices. This study presented a novel and controlled synthetic strategy to HA/RIS/poly(L ‐LA) nanocomposites that are promising for orthopedic applications as well as for bone tissue engineering. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Homoleptic,bis‐ligated magnesium complexes for ring‐opening polymerization of lactide and lactones: Synthesis,structure, polymerization behavior and mechanism studies

Bis‐ligated, homoleptic magnesium complexes 1–3 were synthesized through the reaction of 1 equiv. dibutyl magnesium with 2 equiv. β‐ketiminato ligands bearing different substituents on the nitrogen atom and 8 position on benzocyclohexanone. All of the complexes were identified by nuclear magnetic resonance (NMR) and X‐ray crystallography. Complexes 2 and 3 adopted distorted tetrahedral geometry around Mg, by chelating of two ancillary ligands, while complex 1 adopted a dimeric structure with penta‐coordination around Mg. These complexes can be used as efficient catalysts for the ring‐opening polymerization of L‐lactide, ε‐caprolactone, δ‐valerolactone (δ‐VL) and trimethylene carbonate in the presence of alcohol as a co‐initiator. With the increasing steric bulk of the ancillary ligands, the catalytic activity of Mg complexes was improved significantly. Particularly, complex 3 having the largest steric hindrance showed excellent catalytic performance for the polymerization of δ‐VL. It could polymerize 800 equiv. δ‐VL in 10 min, and produce polyvalerolactone with narrow molecular weight distributions (M_w/M_n < 1.2) at 35°C or higher temperature. No transesterification side reaction was observed. Moreover, complex 3 exhibited good tolerance to excessive alcohol and an immortal polymerization characteristic. The mechanism studies by in situ NMR demonstrated a coordination‐insertion process. Besides, it revealed that the steric bulky substituents in the active species derived from the complex and alcohol prevented the metal center from deactivation.     

Radical ring‐opening polymerization

The radical ring‐opening polymerization (RROP) behavior of the following monomers is reviewed, and the possibility for application to functional materials is described: cyclic disulfide, bicyclobutane, vinylcyclopropane, vinylcyclobutane, vinyloxirane, vinylthiirane, 4‐methylene‐1,3‐dioxolane, cyclic ketene acetal, cyclic arylsulfide, cyclic α‐oxyacrylate, benzocyclobutene, o‐xylylene dimer, exo‐methylene‐substituted spiro orthocarbonate, exo‐methylene‐substituted spiro orthoester, and vinylcyclopropanone cyclic acetal. RROP is a promising candidate for producing a wide variety of environmentally friendly functional polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 265–276, 2001     

Titanium complexes bearing amine bis(phenolate) ligands: Synthesis,structure and catalysis in ring‐opening polymerization of lactide

Monomeric bis(isopropoxy) titanium complexes LTi(Oⁱ Pr)₂ (L =  ─ OC₆H₂–4‐R¹–6‐R²–2‐CH₂N[(CH₂)₂N(R³)₂]CH₂–4‐R⁴–6‐R⁵‐C₆H₂O ─ , R¹ = R² = ^t Bu, R³ = Et, R⁴ = R⁵ = Cl, (L¹)Ti(Oⁱ Pr)₂; R¹ = R² = Me, R³ = Et, R⁴ = R⁵ = Me, (L²)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Et, R⁴ = OMe, R⁵ = ^t Bu, (L³)Ti(Oⁱ Pr)₂; R¹ = R⁴ = OMe, R³ = Et, R² = R⁵ = ^t Bu, (L⁴)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Me, R⁴ = OMe, R⁵ = ^t Bu, (L⁵)Ti(Oⁱ Pr)₂) supported by amine bis(phenolate) ligands were synthesized and characterized using NMR spectroscopy and elemental analysis. The solid‐state structure of (L³)Ti(Oⁱ Pr)₂ was determined using single‐crystal X‐ray diffraction. (L^1–5)Ti(Oⁱ Pr)₂ were all found to initiate the ring‐opening polymerization of l ‐lactide and rac ‐lactide in a controlled manner at 110–160°C. As shown by kinetic studies, (L¹)Ti(Oⁱ Pr)₂ polymerized l ‐lactide faster than did (L^2–5)Ti(Oⁱ Pr)₂. In addition, good number‐average molecular weight and narrow polydispersity index (1.00–1.71) of polymers were also obtained. The microstructure of the polymers and a possible mechanism of coordination–insertion of polymerization were evidenced by MALDI‐TOF and ¹H NMR spectra of the polylactides.     

Use of germanium initiators in ring‐opening polymerization of L‐lactide

Three different, new germanium initiators were used for ring‐opening polymerization of L ‐lactide. Chlorobenzene and 120 °C was a usable polymerization system for solution polymerization, and the results from the polymerizations depended on the initiator structure and bulkiness around the insertion site. The average molecular weights as measured by size exclusion chromatography increased linearly with the monomer conversion, and the molecular weight dispersity was around 1.2 for initiators 1 and 2 , whereas it was around 1.4 for initiator 3 . The average molecular weight of poly(L ‐lactide) could be controlled with all three initiators by adding different ratios of monomer and initiator. The reaction rate for the solution polymerization was, however, overall extremely slow. With an initial monomer concentration of 1 M and a monomer‐to‐initiator ratio of 50, the conversion was 93% after 161 h for the fastest initiator. In bulk polymerization, 160 °C, the conversion was 90% after 10 h. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3074–3082, 2003     

Ring opening polymerization and copolymerization of L‐lactide and ɛ‐caprolactone by bis‐ligated magnesium complexes

Seven magnesium complexes ( 1–7 ) were synthesized by reaction of new ( L ³ ‐H – L ⁵ ‐H ) and previously reported ketoimine pro‐ligands with dibutyl magnesium and were isolated in 59–70% yields. Complexes 1–7 were characterized fully and consisted of bis‐ligated homoleptic ketoiminates coordinated in distorted octahedral geometry around the magnesium centers. The complexes were investigated for their ability to initiate the ring opening polymerization (ROP) of l ‐lactide (L‐LA) to poly‐lactic acid (PLA) and ?‐caprolactone (?CL) to poly‐caprolactone in the presence of 4‐fluorophenol co‐catalyst. For L‐LA polymerization, complexes containing ligand electron‐donating groups ( 1–5 ) achieved >90% conversion in 2 h at 100 °C, while the presence of CF₃ groups in 6 and 7 slowed or resulted in no PLA detected. With ?CL, ROP initiated with 1–7 resulted in lower percentage conversion with similar electronic effects. Moderate molecular weight PLA polymeric material (14.3–21.3 kDa) with low polydispersity index values (1.23–1.56) was obtained, and ROP appeared to be living in nature. Copolymerization of L‐LA and ?CL yielded block copolymers only from the sequential polymerization of ?CL followed by L‐LA and not the reverse sequence of monomers or the simultaneous presence of both monomers. Polymers and copolymers were characterized with NMR, gel permeation chromatography, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 48–59     

A novel use of Ti‐POSS as initiator of L‐lactide ring‐opening polymerization

The efficacy of a metal‐silsesquioxane, namely, heptaisobutyl (isopropoxyde)titanium‐polyhedral oligomeric silsesquioxanes (Ti‐POSS), as initiator of the ring‐opening polymerization of L ‐lactide (LLA) has been assessed. Indeed, as demonstrated by proton nuclear magnetic resonance (¹H NMR) spectroscopy and gel permeation chromatography (GPC) measurements, a well‐controlled polymerization occurs via a coordination‐insertion mechanism. Moreover, the above reaction leads to the direct insertion of the silsesquioxane molecule into the polymer backbone, thus producing a hybrid system. Differential scanning calorimetry measurements demonstrated that in comparison with a commercial poly‐L ‐lactide (PLLA), the polymers prepared with Ti‐POSS exhibit a higher crystallinity. Indeed, the presence of silsesquioxane molecules, attached to one end of the polymer chains, has been found to appreciably affect the crystal nucleation density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Microwave‐assisted ring‐opening polymerization of p‐dioxanone

The ring‐opening polymerization (ROP) of p‐dioxanone (PDO) under microwave irradiation with triethylaluminum (AlEt₃) or tin powder as catalyst was investigated. When the ROP of PDO was catalyzed by AlEt₃, the viscosity‐average molecular weight (M_v) of poly(p‐dioxanone) (PPDO) reached 317,000 g mol^?1 only in 30 min, and the yield of PPDO achieved 96.0% at 80 °C. Tin powder was successfully used as catalyst for synthesizing PPDO by microwave heating, and PPDO with M_v of 106,000 g mol^?1 was obtained at 100 °C in 210 min. Microwave heating accelerated the ROP of PDO catalyzed by AlEt₃ or tin powder, compared with the conventional heating method. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3207–3213, 2008     

Computational evaluation of radical ring‐opening polymerization

The tendencies of ring‐opening processes in radical ring‐opening polymerizations were evaluated by AM1 and PM3 semi‐empirical calculations and 6‐31G*‐level calculations based on the density functional theory (DFT) B3LYP models. Sixteen cyclic monomers bearing vinyl or exomethylene groups were categorized into ring‐opening and no‐ring‐opening monomers by the evaluation of the differences of the internal energies and the lengths of the cleaving bonds between the ground states of the initial radicals and the activated states in the ring‐opening processes. Although the semi‐empirical calculations not parameterized to radical reactions resulted in the moderate categorization of the ring‐opening monomers, the DFT calculation clearly distinguished the ring‐opening and no‐ring‐opening monomers. The ring‐opening tendencies were also evaluated with the changes in the internal energies throughout the ring‐opening processes, but this method could not group the ring‐opening and no‐ring‐opening monomers clearly. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2827–2834, 2007     

Ring‐opening polymerization of 6‐hydroxynon‐8‐enoic acid lactone: Novel biodegradable copolymers containing allyl pendent groups

This article reports the synthesis and copolymerization of 6‐hydroxynon‐8‐enoic acid lactone. The ring‐opening polymerization of this lactone‐type monomer bearing a pendant allyl group led to new homopolymers and random copolymers with ε‐caprolactone and L ,L ‐lactide. The copolymerizations were carried out at 110 °C with Sn(Oct)₂ as a catalyst. The introduction of unsaturations into the aliphatic polyester permitted us to carry out different chemical transformations on this family of polymers. For example, this article reports the bromination, epoxidation, and hydrosylilation of the allyl group in the new polyester copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 870–875, 2000     

Cyclic polylactides via simultaneous ring‐opening polymerization and polycondensation catalyzed by dibutyltin mercaptides

l ‐Lactide is polymerized in bulk at 160 °C either with dibutyltin bis(benzylmercaptide) (SnSBzl), dibutyltin bis(benzothiazole 2‐mercaptide) (SnMBT), or with dibutyltin bis(pentafluorothiophenolate) (SnSPF) as catalysts. SnSBzl yields linear polylactides having benzylthio‐ester end groups in addition to cyclic polylactides, whereas SnMBT and SnSPF mainly or exclusively yield cyclic polylactides. This finding, together with model reactions, indicates that the SnS catalysts promote a combined ring‐opening polymerization and polycondensation process including end‐to‐end cyclization. SnMBT caused slight racemization (3%–5%), when used at 160 °C. With SnSPF optically pure cyclic poly(l ‐lactide)s with high‐molecular weights can be prepared at 160 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3767–3775     

Novel fluorinated stabilizers for ring‐opening polymerization in supercritical carbon dioxide

Ring‐opening polymerization (ROP) in supercritical carbon dioxide (scCO₂) has been the subject of much recent interest, although few publications describe the development of stabilizers to produce biodegradable particles of poly(L ‐lactide) (PLLA) and polyglycolide (PGA). Here we describe the synthesis of a series of novel fluorinated diblock copolymers by the acid‐catalyzed esterification of well‐defined blocks of polycaprolactone (PCL) with Krytox 157FSL, a carboxylic acid terminated perfluoropolyether. These diblock copolymers were then tested as stabilizers in the ROP of glycolide and L ‐lactide, or a mixture of the two, in scCO₂, and this resulted in the corresponding homopolymers or random copolymers. In the absence of stabilizers, only aggregated solids were formed. When the reaction was repeated with a stabilizer, PGA and PLLA were obtained as discrete microparticles. The stabilizer efficiency increased as the length of the polymer‐philic PCL block increased. One optimized stabilizer worked at loadings as low as 3% (w/w) with respect to the monomer, demonstrating these to be extremely effective stabilizers. It was found that to produce microparticles with this process, the product polymers must be semicrystalline; amorphous polymers, such as poly(lactide‐co‐glycolide), are plasticized by scCO₂ and yield only aggregated solids rather than discrete particles. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6573–6585, 2005     

Stereoselective ring‐opening polymerization of D,L‐lactide,initiated by aluminum isopropoxides bearing tridentate nonchiral schiff‐base ligands

Ring‐opening polymerization of D,L ‐lactide was stereoselectively achieved using newly designed aluminum alkoxide complexes as initiators. These half‐SALEN aluminum complexes bearing tridentate nonchiral Schiff‐base ligands are racemates, which provide chirality in the aluminum centers, efficiently afforded a stereoblock copolymer of D,L ‐LA. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ruthenium‐based metathesis initiators: Development and use in ring‐opening metathesis polymerization

For many years, olefin metathesis has been a central topic of industrial and academic research because of its great synthetic utility. The employed initiators cover a wide range of compounds, from simple transition‐metal salts to highly sophisticated and well‐defined alkylidene complexes. Currently, ruthenium‐based catalysts are at the center of attention because of their remarkable tolerance toward oxygen, moisture, and numerous functionalities. This article focuses on recent developments in the field of ring‐opening metathesis polymerization using ruthenium‐based catalysts. ruthenium‐based initiators and their applications to the preparation of advanced polymeric materials are briefly reviewed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2895–2916, 2002     

Organocatalysis applied to the ring‐opening polymerization of β‐lactones: A brief overview

Organocatalysis offers a number of prospects in the polymer community and presents advantages over metal based and bio‐organic methods. The use of organic molecules for performing chemical reactions is not a new concept, and any research into organocatalytic reactions builds on a respected history. Compared to the organocatalysis of large lactones, which began in the early 2000s, the examples presented here will demonstrate that few metal‐free initiating systems had been applied to β‐lactones well before the beginning of the current millennium. These metal‐free initiating systems present indisputable advantages over metal‐based processes. In the following paper, ring‐opening polymerizations (ROPs) of various β‐lactones for the preparation of poly(hydroxyalkanoate)s will be presented, as will the types of mechanisms involved, that is, zwitterionic and anionic, and cationic or supramolecular‐based ROPs. The advantages and drawbacks of the different technics will be discussed in the domain, which, for us, is important in the overall production of bioplastics. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 657–672