Enhancement of the static SIMS secondary ion yields of lipid moieties by ultrathin gold coating of aged oil paint surfaces

Static secondary ion mass spectrometry (SIMS) is a powerful technique for identification and localization of pigments and binding media present in traditional paintings. Coating the surface of a cross‐section with a 20 Å thick gold layer improves the yields of secondary ions from the fatty acids and diacids. A chalk tablet containing 1% stearic acid, which was partially covered during gold deposition, is used as a test system to investigate the increase of the organic secondary ion yields upon gold deposition in SIMS imaging. A comparative study of a native and gold‐coated aged surface of a lead white‐containing linseed oil paint demonstrates the enhancement of the organic ion yields on a sample relevant for painting studies. The yields of oil paint‐derived negative ions increase by a factor of 3 whereas the yields of positive ions increase by a factor of 2–4. The different types of charged functional groups determine the degree of improvement in yield. Gold coating improves the ionization process of the fatty acids and does not influence their fragmentation. The dissociation of the lead white by the primary ion beam is reduced due to the gold coating. Copyright © 2004 John Wiley & Sons, Ltd.     

Matrix‐enhanced secondary ion mass spectrometry: the influence of MALDI matrices on molecular ion yields of thin organic films

In this work the effect in secondary ion mass spectrometry (SIMS) of several frequently used matrix‐assisted laser desorption/ionisation (MALDI) matrices on the secondary ion intensities of low molecular weight (m/z 400–800) organic dyes and a pharmaceutical is tested. Matrix (10^?1 M) and analyte (10^?2 M) solutions were made in methanol. Mixtures with several concentration ratios were prepared from these solutions and spincoated on Si substrates prior to time‐of‐flight (TOF)‐SIMS analysis. In some cases the presence of the MALDI matrices caused a considerable increase in the positive secondary (protonated) molecular ion signals. Enhancements of a factor of 20 and more were recorded. Generally, of the matrices used, 2,5‐dihydroxybenzoic acid and 2,4,6‐trihydroxyacetophenone brought about the highest intensity increases. It was also shown that matrix‐enhanced (ME‐)SIMS is capable of lowering the detection limits for molecule ions. However, the enhancement effect is strongly influenced by the analyte/matrix combination and its concentration ratio. As a result, finding an optimal analyte/matrix mixture can be a very time‐consuming process. Mostly, the presence of the matrices causes changes in the relative ion intensities in the TOF‐S‐SIMS spectra. Compared to the spectra recorded from samples without matrices, only a few additional peaks, such as signals that originate directly from the applied matrix or adduct ions, are observed in the mass spectra. Sometimes molecule ions and some characteristic fragments at high m/z values, that cannot be recorded without matrix, do appear in the spectrum when a matrix is present. In the negative mode no enhancement effect is observed on applying the studied MALDI matrices. The results obtained from samples treated with MALDI matrices are also compared to SIMS results for the same samples after Ag and Au metallisation (MetA‐SIMS). For three of the four tested compounds Au MetA‐SIMS resulted in higher ion yields than ME‐SIMS. For both techniques possible mechanisms that can account for the enhancement effect are proposed. Copyright © 2005 John Wiley & Sons, Ltd.     

Comparative studies of SIMS and SNMS analyses during the build up of sputter equilibrium under oxygen and rare gas ion bombardment

Sputtering of solid surfaces by using a focused ion beam is the basis for secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS). The ion bombardment initiates not only redistribution of sample atoms but also massive changes in the surface and near surface composition of the bombarded area due to the sputter process and implantation of the primary ions. Changes in the matrix-composition affects the secondary ion yields and therefore a steady state (sputter equilibrium) has to be reached before SIMS data can give quantifiable results. SNMS is much less affected by those yield effects and therefore a combination of SIMS and SNMS can establish a basis for interpretation of SIMS data before the steady state is reached. In order to determine the effects of primary ion incorporation, we applied different primary ion species successively to generate different equilibria. An oxygen ion beam oxidizes the sample surface and by using a rare gas primary ion (PI) this oxide can be removed and analyzed.     

Reduction of matrix effects in TOF‐SIMS analysis by metal‐assisted SIMS (MetA‐SIMS)

We investigated reduction of the matrix effect in time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) analysis by the deposition of a small amount of metal on the sample surfaces (metal‐assisted SIMS or MetA‐SIMS). The metal used was silver, and the substrates used were silicon wafers as electroconductive substrates and polypropylene (PP) plates as nonelectroconductive substrates. Irganox 1010 and silicone oil on these substrates were analyzed by TOF‐SIMS before and after silver deposition. Before silver deposition, the secondary ion yields from the substances on the silicon wafer and PP plate were quite different due to the matrix effect from each substrate. After silver deposition, however, both ion yields were enhanced, particularly the sample on the PP plate, and little difference was seen between the two substrates. It was therefore found that the deposition of a small amount of metal on the sample surface is useful for reduction of the matrix effect. By reducing the matrix effect using this technique, it is possible to evaluate from the ion intensities the order of magnitude of the quantities of organic materials on different substrates. In addition, this reduction technique has clear utility for the imaging of organic materials on nonuniform substrates such as metals and polymers. MetA‐SIMS is thus a useful analysis tool for solving problems with real‐world samples. Copyright © 2005 John Wiley & Sons, Ltd.     

Precise and fast secondary ion mass spectrometry depth profiling of polymer materials with large Ar cluster ion beams

We demonstrate depth profiling of polymer materials by using large argon (Ar) cluster ion beams. In general, depth profiling with secondary ion mass spectrometry (SIMS) presents serious problems in organic materials, because the primary keV atomic ion beams often damage them and the molecular ion yields decrease with increasing incident ion fluence. Recently, we have found reduced damage of organic materials during sputtering with large gas cluster ions, and reported on the unique secondary ion emission of organic materials. Secondary ions from the polymer films were measured with a linear type time‐of‐flight (TOF) technique; the films were also etched with large Ar cluster ion beams. The mean cluster size of the primary ion beams was Ar₇₀₀ and incident energy was 5.5 keV. Although the primary ion fluence exceeded the static SIMS limit, the molecular ion intensities from the polymer films remained constant, indicating that irradiation with large Ar cluster ion beams rarely leads to damage accumulation on the surface of the films, and this characteristic is excellently suitable for SIMS depth profiling of organic materials. Copyright © 2009 John Wiley & Sons, Ltd.     

TOF‐SIMS matrix effects in mixed organic layers in Ar cluster ion depth profiles

Matrix effects are crucial for analyses using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) in terms of quantitative analysis, depth profiling and imaging. It is often difficult to predict how co‐existing materials will influence each other before such analysis. However, matrix effects need to be curtailed in order to assume the appropriate amount of a target material in a sample. First, matrix effects on different types of organic mixed samples, including a sample composed of Irganox 1010 and Irganox 1098 (MMK sample) and another composed of Irganox 1010 and Fmoc‐pentafluoro‐L‐phenylalanine (MMF sample), were observed utilizing ToF‐SIMS and the dependence of the secondary ion polarity of the matrix effects on the same sample was evaluated. Next, the correction method for the ToF‐SIMS matrix effects proposed by Shard et al. was applied to a comparison of the positive secondary ion results to the negative ones. The matrix effects on the positive ion data in both samples were different from those on the negative ion data. The matrix effect correction method worked effectively on both the negative and positive depth profiles. Copyright © 2017 John Wiley & Sons, Ltd.     

SIMS using O−, F−, Cl−, Br− and I− primary ion bombardment

The success of secondary ion mass spectrometry (SIMS) analyses depends largely on the ionization probability of the analyzed elements. The chemical state of the surface changes with the chemical nature and the concentration of implanted ions. The positive ionization probability can be enhanced by bombarding the surface with electronegative elements. In view of such an enhancement of the positive secondary ion yield, we present SIMS analyses carried out with O^?, F^?, Cl^?, Br^? and I^? primary ion beams. Useful yields were experimentally determined for metal (Al, Ni, Cu, Ag and Ta) and semiconductor samples (Si, Ge, InP and GaAs). For metal samples, an enhancement of the useful yield under halogen bombardment, compared with O^? bombardment, was observed for Ni, Cu and Ag under F^? bombardment (enhancement of up to two orders of magnitude). For semiconductors, lower useful yields are obtained under halogen bombardment as compared with O^? bombardment. The observed results are discussed in terms of the surface concentration of the implanted primary ion species and their electronegativity. Copyright © 2012 John Wiley & Sons, Ltd.     

SIMS depth profile analysis using MCs+ molecular ions

Summary The use of Cs⁺ primary ions in conjunction with the detection of MCs⁺ molecular ions (where M is the element to be monitored) in SIMS depth profiling is shown to be an efficient method of minimizing the variations of ion yields with sample composition, e.g., at the interface of multilayer structures. Depth profiles of several such samples demonstrate that MCs⁺ intensities follow closely the concentrations of the respective elements, providing the possibility of a (semi)quantitative analysis of major components by means of secondary ion mass spectrometry. As indicated by the similarity of their energy distribution data, the formation and emission process of MCs⁺ molecules seems coupled to that of Cs⁺ ions.     

Method for improved secondary ion yields in cluster secondary ion mass spectrometry

A method to increase useful yields of organic molecules is investigated by cluster secondary ion mass spectrometry (SIMS). Glycerol drops were deposited onto various inkjet‐printed arrays and the organic molecules in the film were rapidly incorporated into the drop. The resulting glycerol/analyte drops were then probed with fullerene primary ions under dynamic SIMS conditions. High primary ion beam currents were shown to aid in the mixing of the glycerol drop, thus replenishing the probed area and sustaining high secondary ion yields. Integrated secondary ion signals for tetrabutylammonium iodide and cocaine in the glycerol drops were enhanced by more than a factor of 100 compared with an analogous area on the surface, and a factor of 1000 over the lifetime of the glycerol drop. Once the analyte of interest is incorporated into the glycerol microdrop, the solution chemistry can be tailored for enhanced secondary ion yields, with examples shown for cyclotrimethylenetrinitramine (RDX) chloride adduct formation. In addition, depositing localized glycerol drops may enhance analyte secondary ion count rates to high enough levels to allow for site‐specific chemical maps of molecules in complex matrices such as biological tissues. Published in 2010 by John Wiley & Sons, Ltd.     

Retracted: Mass analysis by Ar‐GCIB‐dynamic SIMS for organic materials

Generally, dynamic secondary ion mass spectrometry (SIMS) has been mainly used as one of the most powerful tools for inorganic mass analysis. On the other hand, an Ar gas cluster ion beam (GCIB) has been developed and spread as a processing tool for surface flattening and also a projectile for time‐of‐flight (ToF) SIMS. In this study, we newly introduced an Ar‐GCIB as a primary ion source to a commercially available dynamic SIMS apparatus, and investigated mass spectra of amino acid films (such as Arginine and Glycine) and polymer films (Polyethylene: PE and Polypropylene: PP) as organic model samples. As a result, each characteristic fragment peak indicating the original molecular organic structure was observed in the acquired mass spectra. In addition, their own molecular ions of the amino acids were also clearly observed. Mass spectra of PE/PP blended‐polymer films acquired using Ar‐GCIB‐dynamic SIMS could be identified between pure PE and PE:PP = 1:3 mixture by applying principal component analysis (PCA).     

Soft-sputtering of insulin films in argon-cluster secondary ion mass spectrometry

In secondary ion mass spectrometry (SIMS) of organic substances, the dissociation of the sample molecules is crucial. We have developed SIMS equipment capable of bombardment, where the primary ions are argon cluster ions with kinetic energy per atom controllable down to 1 eV. We previously reported the detection of intact ions of insulin and cytochrome C using this equipment. In this paper, we present a detailed characterization of the emission of secondary ions from insulin, focusing on the difference in secondary ion yield between intact ions and fragment ions by varying the incident angle of the cluster ions. The emission intensity of the intact ions was changed drastically due to the exposed dosage and incident angle of the cluster ions in contrast to the fragment ions. We discuss these results based on the manner in which the argon-cluster ions collide with the organic solid.     

Study on ion formation in electrospray droplet impact secondary ion mass spectrometry

A new type of cluster secondary ion mass spectrometry (SIMS), named electrospray droplet impact (EDI), has been developed in our laboratory. In general, rather strong negative ions as well as positive ions can be generated by EDI compared with conventional SIMS. In this work, various aspects of ion formation in EDI are investigated. The Brønsted bases (proton acceptor) and acids (proton donor) mixed in the analyte samples enhanced the signal intensities of deprotonated molecules (negative ions) and protonated molecules (positive ions), respectively, for analytes. This suggests the occurrence of heterogeneous proton transfer reactions (i.e. M + M′ → [M+H]⁺ + [M′? H]^?) in the shockwave‐heated selvedge of the colliding interface between the water droplet and the solid sample deposited on the metal substrate. EDI‐SIMS shows a remarkable tolerance to the large excess of salts present in samples. The mechanism for desorption/ionization in EDI is much simpler than those for MALDI and SIMS because only very thin sample layers take part in the shockwave‐heated selvedge and complicated higher‐order reactions are largely suppressed. Copyright © 2007 John Wiley & Sons, Ltd.     

Interpretation of static secondary ion spectra

A model is presented in which electron impact (EI)/electronic excitation plays a pivotal role in the formation of secondary ions in the SIMS experiment, especially those originating from discrete molecular species. Positive ions are formed by electron loss whereas negative ions are formed by electron capture. Collisions of the new ions with the surface and with other species directly above the sample, along with metastable decay events, reduce the number of odd electron ions detected and produce the changes that make SIMS spectra so different from EI mass spectra. Primary support for this model is gathered from static SIMS spectra themselves, which can be rationalized to a large degree by assuming that the same rearrangement and fragmentation mechanisms that are invoked to explain EI mass spectra take place at the surface after kiloelectron‐volt ion impacts. The static secondary ion spectra of a variety of simple discrete molecular species, of simple hydrocarbons, of monofunctional organic species and of more complicated multifunctional organic species are analyzed in this way and the utility of this model is demonstrated. Copyright © 2004 John Wiley & Sons, Ltd.     

Study of the desorption/ionization mechanism in electrospray droplet impact secondary ion mass spectrometry

Electrospray droplet impact (EDI) secondary ion mass spectrometry (SIMS) is a desorption/ionization technique for mass spectrometry in which highly charged water clusters produced from an atmospheric-pressure electrospray are accelerated in vacuum by several kV and impact on the sample deposited on the metal substrate. The abundances of the secondary ions for C(60) and amino acids are measured as a function of the acceleration voltage of the primary charged water droplets. Two desorption/ionization mechanisms are suggested in the EDI ionization processes: low-energy and high-energy regimes. In the low-energy regime, the excess charges in the primary droplets play a role in the formation of secondary ions. In the high-energy regime, samples are ionized by the supersonic collision of the primary droplets with the sample. The yield of secondary ions increases by about three orders of magnitude with increase in the acceleration voltage of the primary droplets from 1.75 kV to 10 kV.     

Surface studies of halloysite nanotubes by XPS and ToF‐SIMS

This report provides detailed experimental results of thermal and surface characterization on untreated and surface‐treated halloysite nanotubes (HNTs) obtained from two geographic areas. Surface characterization techniques, including XPS and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) were used. ToF‐SIMS surface analysis experiments were performed with both atomic and cluster ion beams. Higher ion yields and more high‐mass ions were obtained with the cluster ion beams. Static ToF‐SIMS spectra were analyzed with principal component analysis (PCA). Morphological diversities were observed in the samples although they mainly contained tubular structures. Thermogravimetric data indicated that aqueous hydrogen peroxide solution could remove inorganic salt impurities, such as alkali metal salts. The amount of grafting of benzalkonium chloride of HNT surface was determined by thermogravimetic analysis. PCA of ToF‐SIMS spectra could distinguish the samples mined from different geographical locations as well as among surface‐treated and untreated samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Molecular ME‐ToF‐SIMS yield as a function of DHB matrix layer thicknesses obtained from brain sections coated by sublimation/deposition techniques

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) can be used to image biological samples with nanometer‐scale resolution, albeit with the drawback that it often cannot detect large molecular signals. One way to increase secondary ion molecular yield is to chemically modify the surface in the so‐called matrix‐enhanced SIMS (ME‐SIMS) approach, which is based on embedding analyte molecules in low‐weight organic matrices. In this study, a solvent‐free sample preparation technique was employed using sublimation/deposition for coating a mouse brain section with a thin layer of a 2,5‐dihydroxybenzoic acid (DHB) matrix. Using this preparation technique, signal enhancements of up to a factor of 18 could be detected. It was found that the matrix layer thickness plays an important role in the efficiency of yield enhancement. Also, a complex influence of the matrix layer on various signals was observed. Copyright © 2015 John Wiley & Sons, Ltd.     

Topography and Field Effects in Secondary Ion Mass Spectrometry – Part I: Conducting Samples

Quantitative chemical characterization of surfaces with topography by secondary ion mass spectrometry (SIMS) remains a significant challenge due to the lack of systematic and validated measurement methods. In this study, we combine an experimental approach using a simple model system with computer simulation using SIMION, to understand and quantify the key factors that give rise to unwanted topographic artefacts in SIMS images of conducting samples with microscale topography. Experimental data are acquired for gold wires (diameters 33 to 125 μm) mounted onto silicon wafers. Significant loss of ion intensities and shadowing arise from the distortion of the extraction field, and the chemical analysis over the whole of the sample surface is difficult. For large primary ion incidence angles of ≥55° to the surface normal, a fraction of the primary ions are scattered from the target and impact the substrate, emitting secondary ions that may be mistaken as originating from the wire. For conducting samples, topographic field effects may be reduced by the use of a smaller extraction voltage and an extraction delay. The effects of an extraction delay on ion intensities, mass resolution and time-of-flight are studied, and its application is demonstrated on an anisotropically etched silicon sample. The use of a simple sample holder with a V-shaped groove to reduce topographic field effects for wires is also presented. Using these results, we provide clear guidance to analysts for the diagnosis and identification of topography effects in SIMS, and present key recommendations to minimize them in practical analysis.     

Time of flight secondary ion mass spectrometric determination of molecular weight distributions of low polydispersity poly(dimethyl siloxane) with polyatomic primary ions

This work reports a comparison of oligomer and fragment ion intensities resulting from primary ion bombardment with several primary ion sources (Bi_n⁺, C₆₀⁺, and Cs⁺) at various energies in secondary ion mass spectrometry (SIMS). Although the use of polyatomic primary ions are of great interest due to increased secondary ion efficiency and yield, we demonstrate that monatomic primary ions result in increased oligomer ion yield for polymers prepared as submonolayer films on silver substrates. The enhancement of oligomer secondary ion yield with monatomic ions is evidence that monatomic primary ions have a shallower sampling depth than polyatomic ions, resulting from a collision cascade that is less energetic at the sample surface. The results are also consistent with a lower degree of fragmentation of the resultant secondary ions, which is observed when evaluating the fragmentation data and the spectral data.     

SIMS analysis of poorly conducting surfaces

Summary Charge effects perturb the analysis of poorly conducting materials (glass, ceramics, polymers etc.) via modern surface physics methods which use charged primary and/or secondary particles. This is also true for secondary ion mass spectrometry (SIMS). The use of neutral primary particles (Neutral Primary Beam-SIMS = NPB-SIMS) reduces such perturbations appreciably: positive as well as negative secondary ions may be analyzed. The original distribution of very mobile species in the matrix to be analyzed will not be changed if certain conditions are observed. With this in mind the analysis of chemical and isotopic concentration profiles is possible as they are encountered in corrosion processes, tracer diffusion experiments, and surface engineering or semiconductor technology.

---

SIMS-Analyse von Isolatoroberflächen

     

Time‐of‐flight mass spectrometry depth profiling of sodium‐implanted polyethylene terephthalate

Depth profiling analysis of sodium (Na)‐implanted polyethylene terephthalate was performed by using time‐of‐flight secondary ion mass spectrometry in the cesium‐attachment regime. A radical redistribution of the main element due to diffusion and escape of some elements, such as oxygen and hydrogen, and carbonization of a top 550 nm layer were observed. The depth distribution of the implanted sodium was found to be radically different from the “theoretical” distribution calculated by using the Monte Carlo simulation method (TRIM code). We conclude that it is possible to perform an effective depth profiling analysis of an implanted polymer in the “standard” secondary ion mass spectrometry regime without using a big cluster primary ion beam.