Radiation-induced darkening of ionic liquid [C4mim][NTf2] and its decoloration

The radiation effect on a hydrophobic room-temperature ionic liquid (RTIL), 1-butyl-3-methyl-imidazolium bis[(trifluoromethyl)sulfonyl]imide ([C₄mim][NTf₂]), was studied by γ-irradiation under nitrogen atmosphere. Accompanied by color darkening and increase of light absorbance in a wide wavelength range, a distinct absorption peak at around 290 nm for irradiated [C₄mim][NTf₂] appeared when acetonitrile was used as solvent, and the intensity of the peak enhanced with increasing dose. The spectrophotometric study on the irradiated RTILs containing 1,3-dialkylimidazolium cations associated with different inorganic anions revealed that the peak is ascribed to the radiolysis products of the [C₄mim]⁺. And the wavelength of the peak was affected by alkyl chain length on imidazolium cation, while the intensity of the peak was influenced by anions. With incorporating a little amounts of oxidants, such as KMnO₄ and HNO₃ into irradiated [C₄mim][NTf₂], the intensity of the peak at 290 nm decreased obviously and the decoloration of [C₄mim][NTf₂] occurred, suggesting that the peak at 290 nm is assigned to the colored species and the species can be oxidized.     

Isotope effects on miscibility of 1-alkyl-3-methylimidazolium bis(trifluoromethyl)sulfonyl imides with aromatic hydrocarbons

The liquid–liquid miscibility temperatures as a function of composition and deuterium substitution have been experimentally determined for the binary mixtures of 1-decyl-3-methylimidazolium bis(trifluoromethyl)sulfonyl imide, [C₁₀MIM][NTf₂], and 1-dodecyl-3-methylimidazolium bis(trifluoromethyl)sulfonyl imide, [C₁₂MIM][NTf₂] with benzene and toluene and their deuterated forms. All systems exhibit upper critical solution temperatures (UCSTs) and better miscibility for ionic liquids with longer alkyl chain. The interchange of benzene for toluene results in worse miscibility for [C₁₀MIM][NTf₂] and better for [C₁₂MIM][NTf₂]. Deuteration of the aromatics leads to better miscibility in each case. The sign of the isotope effect is in agreement with expectations and its value seems to be seriously affected by the neighborhood of the hypercritical state.     

Synthesis of Carbonyl Compounds from Alcohols Using Electrochemically Generated Superoxide Ions in RTILs

Abstract

We show that the superoxide ion (O₂ ^??) generated electrochemically from oxygen dissolved in room-temperature ionic liquids (RTILs) reacts with primary and secondary alcohols to form the corresponding ketones and carboxylic acids, respectively. Specifically, we study the conversion of benzhydrol to benzophenone and benzyl alcohol to benzaldehyde/benzoic acid. The kinetics (e.g., rate, selectivity, and yield) for these reactions are also determined as functions of the variations in the structure of the ionic liquids. The RTILs used here are imidazolium-based cations where the functional groups on the imidazolium ring are modified. Specifically, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], 1-butyl-2,3-dimethylimidazolium hexafluorophosphate [bdmim][PF₆], and 1-hexyl-3-methylimidazolium hexafluorophosphate [hmim][PF₆] are used as the reaction medium. These results are compared to an ammonium-based RTIL (N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide). The results show that the nucleophilic attack by the O₂ ^?? of both the RTIL and the alcohol, especially that of the H atom at the R2 position of the [bmim][PF₆] and [hmim][PF₆], greatly affects the yields. No RTIL degradation products were detected for the reactions in [bdmim][PF₆] and N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. For the benzyl alcohol oxidation reaction in the RTIL, N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide, benzaldehyde formed did not undergo further oxidation to form benzoic acid, which may be due to the greater hydrophobicity of this RTIL. The competitive reaction kinetics between the alcohol and RTIL component must be considered in the selection of the RTIL solvent system.     

Room Temperature Ionic Liquid Carbon Nanotube Paste Electrodes: Overcoming Large Capacitive Currents Using Rotating Disk Electrodes

The voltammetric response of graphite or carbon nanotube paste electrodes, which incorporate the room temperature ionic liquid, N‐butyl‐N‐methyl pyrrolidinium bis(trifluoromethylsulfonyl) imide or [C₄mpyrr][NTf₂], (RTIL‐CNTPE and RTIL‐CPE respectively) as the binder, towards anionic, cationic and neutral redox probes is examined and compared to conventional paste electrodes which use mineral oil as the binder. The RTIL paste electrodes are found to suffer from very large background currents due to capacitive charging. This is exacerbated further when CNTs are combined with RTILs in the paste. The large charging currents obscure any Faradaic processes of interest, especially at low analyte concentrations. By employing steady state voltammetry at a rotating disk electrode made of the RTIL pastes this problem can be overcome. This allows the electroanalytical properties of these interesting electrode substrates, which combine the attractive properties of CNTs with RTILs to be further explored and developed.     

Synthesis,physical, and thermodynamic properties of 1-alkyl-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide ionic liquids

Synthesis of new ionic liquids (ILs) viz. 1-butyl-3-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [BCN³Py][NTf₂], 1-hexyl-3-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [HCN³Py][NTf₂], 1-hexyl-4-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [HCN⁴Py][NTf₂], and 1-octyl-3-cyanopyridinium bis{(trifluoromethyl)sulfonyl}imide, [OCN³Py][NTf₂] were performed. The specific basic characterization of new compounds by NMR spectra, elementary analysis, water content and glass transition temperature as well as melting temperature, enthalpy of fusion and decomposition of compounds TG/DTA determined by the differential scanning calorimetry, DSC is presented. The heat capacity was measured at three temperatures (298.15, 323.15, and 353.15) K and at pressure 0.1 MPa. The effect of temperature on the density and viscosity is reported over the temperature range from (293.15 to 363.15) K and at 0.1 MPa. The density and viscosity correlation for these systems was provided by an empirical polynomial. From the density–temperature dependence, the isothermal expansion coefficient (volume expansivity), α, was calculated. The surface tension of pure ionic liquids was measured at 0.1 MPa at five temperatures (298.15, 308.15, 318.15, 328.15, and 338.15) K. The surface thermodynamic functions such as surface entropy and enthalpy, critical temperatures according to the Eötvös and Guggenheim definition and the total surface energy of the ILs studied were derived from the temperature dependence of the surface tension values. The parachor and speed of sound for pure ionic liquids were described within a range of temperature from (298.15 to 338.15) K. A qualitative analysis on these quantities in terms of molecular interactions is reported.     

Highly selective GC stationary phases consisting of binary mixtures of polymeric ionic liquids

GC stationary phases composed of binary mixtures of two polymeric ionic liquids (PILs), namely, poly(1‐vinyl‐3‐hexylimidazolium) bis[(trifluoromethyl)sulfonyl]imide (poly(ViHIm‐NTf₂))/poly(1‐vinyl‐3‐hexylimidazolium) chloride (poly(ViHIm‐Cl)) and poly(1‐vinyl‐3‐hexadecylimidazolium) bis[(trifluoromethyl)sulfonyl]imide (poly(ViHDIm‐NTf₂))/poly(1‐vinyl‐3‐hexadecylimidazolium) chloride (poly(ViHDIm‐Cl)), were evaluated in terms of their on‐set bleed temperature and separation selectivity. A total of six neat or binary PIL stationary phases were characterized using the solvation parameter model to investigate the effects of the polymeric cation and anion and PIL composition on the system constants of the resulting stationary phases. The hydrogen bond basicity of the mixed poly(ViHIm‐NTf₂)/poly(ViHIm‐Cl) stationary phases was enriched linearly with the increase in the poly(ViHIm‐Cl) content. Results revealed that tuning the composition of the stationary phase allowed for fine control of the retention factors and separation selectivity for alcohols and carboxylic acids as well as selected ketones, aldehydes, and aromatic compounds. A reversal of elution order was observed for particular classes of analytes when the weight percentage of the chloride‐based PIL was increased.     

Synthesis and Properties of Alkoxy‐ and Alkenyl‐Substituted Peralkylated Imidazolium Ionic Liquids

Novel peralkylated imidazolium ionic liquids bearing alkoxy and/or alkenyl side chains have been synthesized and studied. Different synthetic routes towards the imidazoles and the ionic liquids comprising bromide, iodide, methanesulfonate, bis(trifluoromethylsulfonyl)imide ([NTf₂]^?), and dicyanamide {[N(CN)₂]^?} as the anion were evaluated, and this led to a library of analogues, for which the melting points, viscosities, and electrochemical windows were determined. Incorporation of alkenyl moieties hindered solidification, except for cations with high symmetry. The alkoxy‐derivatized ionic liquids are often crystalline; however, room‐temperature ionic liquids (RTILs) were obtained with the weakly coordinating anions [NTf₂]^? and [N(CN)₂]^?. For the viscosities of the peralkylated RTILs, an opposite trend was found, that is, the alkoxy derivatives are less viscous than their alkenyl‐substituted analogues. Of the crystalline compounds, X‐ray diffraction data were recorded and related to their molecular properties. Upon alkoxy substitution, the electrochemical cathodic limit potential was found to be more positive, whereas the complete electrochemical window of the alkenyl‐substituted imidazolium salts was shifted to somewhat more positive potentials.     

Ester Modified Pyrrolidinium Based Ionic Liquids as Electrolyte Component Candidates in Rechargeable Lithium Batteries

Room temperature ionic liquids (RTILs), especially pyrrolidinium based RTILs with bis(trifluoromethane‐sulfonyl)imide (TFSI) as counterion, are frequently proposed as promising electrolyte component candidates thanks to their high thermal as well as high oxidation stability. In order to avoid a resource intensive experimental approach, mainly based on trial and error experiments, a computational screening method for pre‐selecting suitable candidate molecules was adopted and three homologous series compounds were synthesized by modifying the cation structure of pyrrolidinium RTILs. The obtained high purity RTILs: methyl‐methylcarboxymethyl pyrrolidinium TFSI (MMMPyrTFSI), methyl‐ethylcarboxymethyl pyrrolidinium TFSI (MEMPyrTFSI) and methylpropylcarboxymethyl pyrrolidinium TFSI (MPMPyrTFSI) revealed excellent thermal stabilities higher than 300 °C. Furthermore, MMMPyrTFSI and MPMPyrTFSI exhibit high oxidation stability up to 5.4 V vs. Li/Li⁺. No aluminum corrosion of current collector was observed at 5 V vs. Li/Li⁺. In addition to that, these RTILs display a superior salt (LiTFSI) solubility (3.0–3.5 M), compared to the unmodified RTIL 1‐butyl‐1‐methylpyrrolidinium TFSI (Pyr₁₄TFSI) (1.5–2.0 M) at room temperature. All these properties make novel ester modified RTILs promising and interesting candidates for application in rechargeable lithium batteries.     

Tuning the selectivity of polymeric ionic liquid sorbent coatings for the extraction of polycyclic aromatic hydrocarbons using solid-phase microextraction

A new generation polymeric ionic liquid (PIL), poly(1-4-vinylbenzyl)-3-hexadecylimidazolium bis[(trifluoromethyl)sulfonyl]imide (poly(VBHDIm⁺ NTf₂⁻)), was synthesized and is shown to exhibit impressive selectivity towards the extraction of 12 polycyclic aromatic hydrocarbons (PAHs) from aqueous samples when used as a sorbent coating in direct-immersion solid-phase microextraction (SPME) coupled to gas chromatography (GC). The PIL was imparted with aromatic character to enhance π–π interactions between the analytes and the sorbent coating. For comparison purposes, a PIL with similar structure but lacking the π–π interaction capability, poly(1-vinyl-3-hexadecylimidazolium bis[(trifluoromethyl)sulfonyl]imide) (poly(HDIm⁺ NTf₂⁻)), as well as a commercial polydimethylsiloxane (PDMS) sorbent coating were evaluated and exhibited much lower extraction efficiencies. Extraction parameters, including stir rate and extraction time, were studied and optimized. The detection limits of poly(VBHDIm⁺ NTf₂⁻), poly(HDIm⁺ NTf₂⁻), and PDMS coatings varied between 0.003–0.07 μg L⁻¹, 0.02–0.6 μg L⁻¹, and 0.1–6 μg L⁻¹, respectively. The partition coefficients (log K_fs) of eight PAHs to the three studied fiber coatings were estimated using a static SPME approach. This study represents the first report of analyte partition coefficients to any PIL-based material.     

Synthesis and Characterisation of Fluorescent Carbon Nanodots Produced in Ionic Liquids by Laser Ablation

Carbon nanodots (C‐dots) with an average size of 1.5 and 3.0 nm were produced by laser ablation in different imidazolium ionic liquids (ILs), namely, 1‐n‐butyl‐3‐methylimidazolium tetrafluoroborate (BMI.BF₄), 1‐n‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (BMI.NTf₂) and 1‐n‐octyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (OMI.NTf₂). The mean size of the nanoparticles is influenced by the imidazolium alkyl side chain but not by the nature of the anion. However, by varying the anion (BF₄ vs. NTf₂) it was possible to detect a significant modification of the fluorescence properties. The C‐dots are much probably stabilised by an electrostatic layer of the IL and this interaction has played an important role with regard to the formation, stabilisation and photoluminescence properties of the nanodots. A tuneable broadband fluorescence emission from the colloidal suspension was observed under ultraviolet/visible excitation with fluorescence lifetimes fitted by a multi‐exponential decay with average values around 7 ns.     

Abrasive Stripping Voltammetric Studies of Lignin and Lignin Model Compounds

Lignin is potentially a major renewable, nonfossil source of aromatic and cyclohexyl compounds. In this study, we have investigated the abrasive stripping voltammetry of lignin and four lignin model compounds in the room temperature ionic liquids (RTILs) [C₄mim][NTf₂], [N_6,2,2,2][NTf₂] and [C₄mim][OTf] (where [C₄mim]⁺=1‐butyl‐3‐methylimidazolium, [N_6,2,2,2]⁺=n‐hexyltriethylammonium, [NTf₂]^?=bis(trifluoromethanesulfonyl)imide and [OTf]^? =trifluoromethanesulfonate) on a gold macrodisk and in 0.1 M H₂SO₄ and 0.1 M NaOH on a boron‐doped diamond (BDD) macroelectrode, with the hope of using the voltammetry to fingerprint the functional groups within the lignin molecule. The use of RTILs on metal electrodes, or either acidic or basic media in combination with BDD electrodes allows solvent systems with wide electrochemical potential windows, useful for studying voltammetry which may be difficult to observe in systems where early breakdown of the solvent occurs.     

Thermodynamics of complexation of cesium ions with dibenzo-18-crown-6 in hydrophobic ionic liquids

The stability constants of the [Cs(DB18C6)]⁺ complex (DB18C6 is dibenzo-18-crown-6, L) in hydrophobic ionic liquids (room-temperature ionic liquids, RTIL) trioctylmethylammonium salicylate ([TOMA][Sal]), tetrahexylammnoium dihexylsulfosuccinate ([THA][DHSS]), and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([BMIM][N(Tf)₂], as well as of the [Cs(18C6)₂]⁺ complex in [BMIM][N(Tf)₂], were measured by 133Cs NMR in the temperature range 27–57°C. The changes in the enthalpy and entropy of complex formation were determined. A linear correlation was revealed between logK ₁ and the extraction factor logD _Cs^DB18C6 for the cesium extraction from an aqueous solution into the RTIL.     

New liquid‐crystal alignment agents based on fluorinated polyimides with trifluoromethyl‐substituted benzene or diphenylether in the side chain

Fluorinated copolyimides derived from 4,4′‐oxydiphthalic anhydride (ODPA) with 4,4′‐oxydianline (ODA) and trifluoromethyl‐containing aromatic diamines have been synthesized and characterized. The trifluoromethyl‐containing diamines include 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, 3,5‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] benzamide, 3,5‐diamino‐1‐[(3′‐trifluoromethyl) phenyl] benzamide, 1,4‐bis(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl) benzene, 3,5‐diaminobenzenetrifluoride, 4,4′‐diamino‐4″‐(p‐trifluoromethyl phenoxy) triphenylamine, and 4‐[(4′‐trifluoromethylphenoxy) phenyl]‐2,6‐bis(4″‐aminophenyl)pyridine. Strong and flexible copolyimide films, produced by casting the polyamic acid solution followed by thermal imidization, exhibited great thermal stability and high mechanical properties. The polyimides had an ultraviolet–visible absorption cutoff at 330–340 nm and pretilt angles as high as 20° for nematic liquid crystals, making them great potential candidates for advanced liquid‐crystal display applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1583–1593, 2002     

Direct methylation and trifluoroethylation of imidazole and pyridine derivatives

Direct methylation or trifluoroethylation of imidazole and pyridine derivatives using N-methyl bis((perfluoroalkyl)sulfonyl)imides or trifluoroethyl phenyliodonium bis((trifluoromethyl)sulfonyl)imide affords high yields of the corresponding salts. This methodology provides a simple route to a variety of room temperature ionic liquids (RTILs).     

Size-controllable gold-platinum alloy nanoparticles on nine functionalized ionic-liquid surfaces and their application as electrocatalysts for hydrogen peroxide reduction

A series of room-temperature ionic liquids (RTILs) containing different functional groups such as hydroxyl, nitrile, carboxyl, and thiol attached to imidazolium cations, combined with various anions such as chloride [Cl], tetrafluoroborate [BF(4)], hexafluorophosphate [PF(6)], and bis[(trifluoromethyl)sulfonyl]imide [Tf(2)N], have been successfully synthesized. Dissolved in chitosan (Chi), the Chi/RTIL composites can be employed as flexible templates for the preparation of Au/Pt nanostructures. These Au/Pt nanostructures can be facilely deposited in situ on the surface of Chi/RTILs through electrodeposition. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) results demonstrate that the alloy size is significantly dependent on the structure of the Chi/RTILs, with sizes ranging from 2.8 to 84.7 nm. Based upon the functionalized RTILs, nine Chi/RTIL-Au/Pt biosensors have been fabricated. First, the size-dependent electrochemistry of Chi/RTIL-Au/Pt was investigated using potassium ferricyanide as the probe. The reversible electron transfer of the Fe(CN)(6)(3-/4-) redox couple was realized for the nine biosensors, and the peak currents, as well as the peak-to-peak separations (ΔE(p)) and electron-transfer rates, differ greatly from each other because of the diversity of the RTILs. Further electrochemical research reveals that the functional groups of these RTILs exert an evident influence on the reduction behavior of H(2)O(2), which in turn illustrates that the electrocatalytic activity of Chi/RTIL-Au/Pt nanocomposites can be tuned by means of employing RTILs with different functional groups, and an appropriate combination of cations and anions may produce a higher activity. The facilitated electron transfer and the intrinsic catalytic activity of Au/Pt NPs provide a facile way to construct a third-generation H(2)O(2) biosensor with a high sensitivity, low detection limit, quick response time, and excellent selectivity.     

Electrochemical Ammonia Gas Sensing in Nonaqueous Systems: A Comparison of Propylene Carbonate with Room Temperature Ionic Liquids

First, the direct and indirect electrochemical oxidation of ammonia has been studied by cyclic voltammetry at glassy carbon electrodes in propylene carbonate. In the case of the indirect oxidation of ammonia, its analytical utility of indirect for ammonia sensing was examined in the range from 10 and 100 ppm by measuring the peak current of new wave resulting from reaction between ammonia and hydroquinone, as function of ammonia concentration, giving a sensitivity 1.29×10^?7 A ppm^?1 (r²=0.999) and limit‐of‐detection 5 ppm ammonia. Further, the direct oxidation of ammonia has been investigated in several room temperature ionic liquids (RTILs), namely 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([C₄mim] [BF₄]), 1‐butyl‐3‐methylimidazolium trifluoromethylsulfonate ([C₄mim] [OTf]), 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₂mim] [NTf₂]), 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim] [NTf₂]) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim] [PF₆]) on a 10 μm diameter Pt microdisk electrode. In four of the RTILs studied, the cyclic voltammetric analysis suggests that ammonia is initially oxidized to nitrogen, N₂, and protons, which are transferred to an ammonia molecule, forming NH via the protonation of the anion(s) (A^?). However, in [C₄mim] [PF₆], the protonated anion was formed first, followed by NH . In all five RTILs, both HA and NH are reduced at the electrode surface, forming hydrogen gas, which is then oxidized. The analytical ability of this work has also been explored further, giving a limit‐of‐detection close to 50 ppm in [C₂mim] [NTf₂], [C₄mim] [OTf], [C₄mim] [BF₄], with a sensitivity of ca. 6×10^?7 A ppm^?1 (r²=0.999) for all three ionic liquids, showing that the limit of detection was ca. ten times larger than that in propylene carbonate since ammonia in propylene carbonate might be more soluble in comparison with RTILs when considering the higher viscosity of RTILs.     

A further understanding of the cation exchange mechanism for the extraction of Sr2+ and Cs+ by ionic liquid

The cation exchange mechanism was further investigated during the extraction of Sr 2+ and Cs+ using the extractant dicyclo- hexano-18-crown-6 (DCH18C6) in an ionic liquid (IL)1-ethyl-3-methyimidazolium bis[(trifluoromethyl)sulfonyl]imide (C2 mimNTf2 ). The concentrations of both the cation C2 mim + and the anion NTf2 in aqueous phase were detected. The con-centration of NTf2 in the aqueous phase decreased as Sr2+ or Cs+ exchanged into the IL phase. Addition of C2 mim + or NTf2 as well as the variation of the solubility of C2 mimNTf2 influenced the extraction efficiency of Sr2+ or Cs+ .     

Using the solvation parameter model to characterize functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion

Ionic liquids (ILs) containing the tris(pentafluoroethyl)trifluorophosphate anion [FAP]⁻ have attracted increased attention due to their unique properties including ultrahigh hydrophobicity, hydrolytic stability, and wide electrochemical window. In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. The role of the functional groups, nature of the counter anion, and cation type on the system constants were evaluated. ILs containing [FAP]⁻ possessed lower hydrogen bond basicity than NTf₂-based ILs having the same cationic component; in the case of hydroxyl-functionalized cations, the presence of [FAP]⁻ led to an enhancement of the hydrogen bond acidity, relative to the NTf₂-analogs. The system constants support the argument that [FAP]⁻ weakly coordinates the cation and any appended functional groups, promoting properties of the cation which might be masked by stronger interactions with other anion systems. The chromatographic performance of the IL stationary phases was evaluated by examining the retention behavior and separation selectivity for chosen analytes. The results from this work can be used as a guide for choosing FAP-based ILs capable of exhibiting desired solvation properties while retaining important physical properties including high thermal stability and high hydrophobicity. Figure In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with tris(pentafluoroethyl)trifluorophosphate [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Novel Bipyridinium Ionic Liquids as Liquid Electrochromic Devices

Novel mono and dialkylbipyridinium (viologens) cations combined with iodide, bromide, or bis(trifluoromethanesulfonyl)imide [NTf₂] as anions were developed. Selective alkylation synthetic methodologies were optimized in order to obtain the desired salts in moderate to high yields and higher purities. All prepared mono‐ and dialkylbipyridinium salts were completely characterized by ¹H, ¹³C, and ¹⁹F NMR spectroscopy, Fourier‐transform IR spectroscopy, and elemental analysis (in the case of NTf₂ salts). Melting points, glass transition temperatures by differential scanning calorimetry (DSC) studies, and decomposition temperatures were also checked for different prepared organic salts. Viscosities at specific temperatures and activation energies were determined by rheological studies (including viscosity dependence with temperature in heating and cooling processes). Electrochemical studies based on cyclic voltammetry (CV), differential pulsed voltammetry (DPV), and square‐wave voltammetry (SWV) were performed in order to determine the redox potential as well as evaluate reversibility behavior of the novel bipyridinium salts. As proof of concept, we developed a reversible liquid electrochromic device in the form of a U‐tube system, the most promising dialkylbipyridinium‐NTf₂ ionic liquid being used as the electrochromic material and the room‐temperature ionic liquid (RTIL), 1‐ethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)‐imide [EMIM][NTf₂], as a stable and efficient electrolyte.