Synthesis and characterization of a biphenyl perfluorocyclobutyl (BP‐PFCB) polyethylene glycol (PEG) blend compatibilizer

Polyethylene glycol (PEG) end‐capped trifluorovinyl ether (TFVE) telechelomer was synthesized in one step via esterification of 4‐(trifluorovinyloxy) benzoic acid. The new telechelomer was characterized by attenuated total reflectance Fourier transform infrared (ATR‐FTIR), elemental analysis, and by ¹⁹F and ¹H nuclear magnetic resonance (NMR) spectroscopy. The telechelomer and 4,4′‐bis(4‐trifluorovinyloxy)biphenyl (BPVE) were thermally copolymerized via step‐growth [2 + 2] cycloaddition at 160°C. The polymerization afforded PEG enchained biphenyl perfluorocyclobutyl (BP‐PFCB) copolymers that are solution processable and film forming. These copolymers were characterized by ATR‐FTIR, ¹⁹F NMR, and ¹H NMR. Gel permeation chromatography (GPC) gave number‐average molecular weight (M_n) ranging 11,000 to 12,000. Compatibilization of PEG and a commercial polymer BP‐PFCB was achieved utilizing the new PEG BP‐PFCB copolymer, 3‐co2‐4 . It was found that 5 wt% of 3 ‐ co2 ‐ 4 was ideal to reduce interfacial tension by scanning electron microscope (SEM). In addition, phase homogeneity was studied by differential scanning calorimetry (DSC). Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and comparison of CF3 versus CH3 substituted perfluorocyclobutyl (PFCB) networks for optical applications

A novel aryl trifluorovinyl ether monomer, 1,1,1‐tris(4‐trifluorovinyloxyphenyl)‐2,2,2‐trifluoroethane ( 5 ), was prepared via a multistep reaction sequence adapted from previously reported procedures. Monomer 5 polymerizes by free‐radical mediated thermal cyclodimerization to produce a crosslinked perfluorocyclobutyl (PFCB) polymer. Substituting CH₃ for CF₃ did not affect the polymerization kinetics as measured by differential scanning calorimetry. Surprisingly, the refractive index of poly5 (1.4931 at 1550 nm) is slightly higher than that measured for poly6 (1.4876 at 1550 nm) despite the significant increase in fluorine content. Compared to the CH₃‐containing monomer 6 , fluorinated analogue 5 exhibits increased thermal and thermal oxidative stability and thus we expected lower optical loss for long‐term high performance applications. Copolymerization with existing aryl trifluorovinyl ether monomers should allow access to new PFCB network copolymers with a tailored performance. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5292–5300, 2004     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

A novel fluorine‐containing graft copolymer bearing perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains

A series of novel graft copolymers consisting of perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains were synthesized by the combination of thermal [2π + 2π] step‐growth cycloaddition polymerization of aryl bistrifluorovinyl ether monomer and atom transfer radical polymerization (ATRP) of methyl methacrylate. A new aryl bistrifluorovinyl ether monomer, 2‐methyl‐1,4‐bistrifluorovinyloxybenzene, was first synthesized in two steps from commercially available reagents, and this monomer was homopolymerized in diphenyl ether to provide the corresponding perfluorocyclobutyl aryl ether‐based homopolymer with methoxyl end groups. The fluoropolymer was then converted to ATRP macroinitiator by the monobromination of the pendant methyls with N‐bromosuccinimide and benzoyl peroxide. The grafting‐from strategy was finally used to obtain the novel poly(2‐methyl‐1,4‐bistrifluorovinyloxybenzene)‐g‐poly(methyl methacrylate) graft copolymers with relatively narrow molecular weight distributions (M_w/M_n ≤ 1.46) via ATRP of methyl methacrylate at 50 °C in anisole initiated by the Br‐containing macroinitiator using CuBr/dHbpy as catalytic system. These fluorine‐containing graft copolymers can dissolve in most organic solvents. This is the first example of the graft copolymer possessing perfluorocyclobutyl aryl ether‐based backbone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Perfluorocyclohexenyl aryl ether polymers via polycondensation of decafluorocyclohexene with bisphenols

A novel class of semifluorinated perfluorocyclohexenyl (PFCH) aryl ether homo/copolymers was successfully synthesized with high yield through the step‐growth polymerization of commercially available bisphenols and decafluorocyclohexene in the presence of a triethylamine base. The synthesized polymers exhibit variable thermal properties depending on the functional spacer group (R). PFCH aryl ether copolymers with random and alternating architectures were also prepared from versatile bis‐perfluorocyclohexenyl aryl ether monomers. The PFCH polymers show high thermal stabilities with a 5% decomposition temperature ranging from 359 to 444 °C in air and nitrogen atmosphere. These semifluorinated PFCH aromatic ether polymers contain intact enchained PFCH olefin moieties, making further reactions such as crosslinking and application specific functionalization possible. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 232–238     

Synthesis and characterization of blue‐light emissive carbazole containing perfluorocyclobutyl arylene ether polymers

A series of N‐alkyl/aryl carbazole 3,6‐substituted arylene trifluorovinyl ether (TFVE) monomers were synthesized in high purity and yield from a concise four‐step synthesis using carbazole as a starting material. Condensate‐free, step‐growth chain extension of the monomers afforded perfluorocyclobutyl (PFCB) arylene ether homo‐ and copolymers as solution processable, optically transparent blue‐light emissive materials. Arylene TFVE monomers and conversion to PFCB arylene ether polymers were structurally elucidated and purity confirmed by high resolution mass spectroscopy, NMR (¹H, ¹³C, and ¹⁹F) spectroscopy, gel permeation chromatography, and attenuated total reflectance Fourier transform infrared analysis. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis revealed glass transition temperatures >150 °C and onset of decomposition in nitrogen >410 °C with 40 wt % char yield up to 900 °C. Optical and electrochemical studies included solution (tetrahydrofuran) and solid state (spin cast thin film) UV–vis/fluorescence spectroscopy and cyclic voltammetry which showed structure dependence of these blue emissive systems on the nature of the N‐alkyl/aryl carbazole substitution in either homo‐ or copolymer configurations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 552–560     

Science and technology of perfluorocyclobutyl aryl ether polymers

This article highlights the preparation of perfluorocyclobutyl (PFCB) aryl ether polymers for a multitude of commercial technologies that are of academic and commercial global interest. In this account, the synthesis of various aryl trifluorovinyl ether (TFVE) monomers tailored for specific applications is discussed. The preparation of PFCB aryl ether polymers and their properties is then presented. Topics of PFCB aryl ether polymers and their applications include photonics, polymer light emitting diodes (PLEDs), proton exchange membranes (PEMs) for fuel cells, atomic oxygen (AO) resistant coatings, and hybrid composites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5705–5721, 2007     

Synthesis and characterization of fluorine‐containing PAA‐b‐PTPFCBPMA amphiphilic block copolymer

A series of perfluorocyclobutyl (PFCB) aryl ether‐based amphiphilic diblock copolymers containing hydrophilic poly(acrylic acid) (PAA) and fluorophilic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) segments were synthesized via successive atom transfer radical polymerization (ATRP). 2‐MBP‐initiated and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine‐catalyzed ATRP homopolymerization of the PFCB‐containing methacrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate, can be performed in a controlled mode as confirmed by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.38. The block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.36) were synthesized by ATRP using Br‐end‐functionalized poly(tert‐butyl acrylate) (PtBA) as macroinitiator followed by the acidolysis of hydrophobic PtBA block into hydrophilic PAA segment. The critical micelle concentrations of the amphiphilic diblock copolymers in different surroundings were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the micelles were investigated by transmission electron microscopy and dynamic laser light scattering, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Orthogonally functionalizable copolymers based on a novel reactive carbonate monomer

A novel N‐hydroxy succinimide‐based carbonate monomer that allows direct synthesis of polymers incorporating a reactive carbonate group in the side chain was synthesized. This new monomer was copolymerized with methyl methacrylate and poly(ethylene glycol) methylether methacrylate using free‐radical polymerization to obtain organo‐ and water‐soluble reactive copolymers. Copolymerization of the activated carbonate monomer with an azide‐containing monomer and N‐hydroxy succinimide‐containing activated ester monomer provided orthogonally functionalizable copolymers. The pendant reactive carbonate groups of the copolymers were functionalized with amines to obtain carbamates. Polymers capable of orthogonal functionalization could be selectively functionalized as desired using subsequent 1,3‐dipolar cycloaddition or amidation reactions. The novel monomer and the copolymers were characterized by ¹H‐NMR, ¹³C‐NMR, and infrared spectroscopy. The efficient stepwise orthogonal functionalization of the copolymers were examined via ¹H‐NMR spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Well‐defined epoxide‐containing styrenic polymers and their functionalization with alcohols

Polymers containing electrophilic moieties, such as activated esters, epoxides, and alkyl halides, can be readily modified with a variety of nucleophiles to produce useful functional materials. The modification of epoxide‐containing polymers with amines and other strong nucleophiles is well‐documented, but there are no reports on the modification of such polymers with alcohols. Using phenyloxirane and glycidyl butyrate as low molecular weight model compounds, it was determined that the acid‐catalyzed ring‐opening of aryl‐substituted epoxides by alcohols to form β‐hydroxy ether products was significantly more efficient than that of alkyl‐substituted epoxides. An aryl epoxide‐type styrenic monomer, 4‐vinylphenyloxirane (4VPO), was synthesized in high yield using an improved procedure and then polymerized in a controlled manner under reversible addition‐fragmentation chain‐transfer (RAFT) polymerization conditions. A successful chain extension with styrene proved the high degree of chain‐end functionalization of the poly4VPO‐based macro chain transfer agent. Poly4VPO was modified with a library of alcohols and phenols, some of which contained reactive functionalities, e.g., azide, alkyne, allyl, etc., using either CBr₄ (in PhCN at 90 °C for 2–3 days) or BF₃ (in CH₂Cl₂ at ambient temperature over 30 min) as the catalyst. The resulting β‐hydroxy ether‐functionalized homopolymers were characterized using size exclusion chromatography, ¹H NMR and IR spectroscopy, and thermal gravimetric analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1132–1144     

A facile route to ureidopyrimidinone‐functionalized polymers via RAFT

Three new ureidopyrimidinone(UPy)‐functionalized chain‐transfer agents (CTAs) have been synthesized for use in reversible addition‐fragmentation chain transfer (RAFT) polymerization. These UPy‐CTAs are able to polymerize a wide variety of vinyl monomers to yield UPy‐functionalized polymers, including homopolymers, block copolymers, and amphiphilic block copolymers. These polymers have been characterized via ¹H and ¹³C NMR spectroscopy, gel permeation chromatography (GPC), UV/visible spectroscopy and differential scanning calorimetry (DSC) to demonstrate end‐group fidelity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of new hyperbranched poly(aryl ether oxadiazole)s

A new AB₂ monomer was synthesized for use in the preparation of a hyperbranched poly(aryl ether oxadiazole) with terminal phenol functionality. The AB₂ monomer contains two phenolic groups and a single aryl fluoride group that is activated toward nucleophilic displacement by the attached oxadiazole ring. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage. Subsequently, a hyperbranched poly(aryl ether oxadiazole) having approximately a 44% degree of branching, as determined by a combination of model compound studies and ¹H NMR, was obtained. The terminal phenolic groups underwent facile functionalization, furnishing hyperbranched polymers with a variety of functional chain ends. The nature of the chain‐end groups had a significant influence on the physical properties of the polymers, such as the glass‐transition temperature and their solubility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3851–3860, 2001     

Synthesis of dual pH/temperature‐responsive polymers with amino groups by living cationic polymerization

For the precision synthesis of primary amino functional polymers, cationic polymerization of a phthalimide‐containing vinyl ether monomer precursor, 2‐vinyloxyethyl phthalimide (PIVE), was examined using a base‐assisting initiating system. Living polymerization of PIVE in CH₂Cl₂ in the presence of 1,4‐dioxane as an added base yielded nearly monodispersed polymers (M_w/M_n < 1.1) and higher molecular weight polymers, which have never been obtained using other initiating systems. Furthermore, block copolymers with hydrophobic or hydrophilic groups could be prepared. The deprotection of the pendant phthalimide groups gave well‐defined pH‐responsive polymers with pendant primary amino groups. Dual‐stimuli–responsive block copolymers having a pH‐responsive polyamine segment and a thermosensitive segment self‐assembled in water in response to both pH and temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1207–1213, 2010     

Perfluorocyclobutyl-containing Amphiphilic Block Copolymers Synthesized by RAFT Polymerization

Amphiphilic block copolymers containing hydrophobic perfluorocyclobutyl‐based (PFCB) polyacrylate and hydrophilic poly(ethylene glycol) (PEG) segments were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The PFCB‐containing acrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)‐phenyl acrylate, was first synthesized from commercially available compounds in good yields, and this kind of acrylate monomer can be homopolymerized by free radical polymerization or RAFT polymerization. Kinetic study showed the 2,2′‐azobis(isobutyronitrile) (AIBN) initiated and cumyl dithiobenzoate (CDB) mediated RAFT polymerization was in a living fashion, as suggested by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer, while the polydispersity indices kept less than 1.10. The block polymers with narrow molecular weight distributions (M_w/M_n≦1.21) were prepared through RAFT polymerization using PEG monomethyl ether capped with 4‐cyanopentanoic acid dithiobenzoate end group as the macro chain transfer agent (mPEG‐CTA). The length of the hydrophobic segment can be tuned by the feed ratio of the PFCB‐based acrylate monomer and the extending of the polymerization time. The micellization behavior of the block copolymers in aqueous media was investigated by the fluorescence probe technique.     

The effect of crosslinking on thermal and mechanical properties of perfluorocyclobutane aromatic ether polymers

As the minimum features in semiconductor devices decrease, it is a new trend to incorporate copper and polymers with dielectric constant less than 3.0 to enhance the performance of the devices. Two fluorinated polymers, poly(biphenyl perfluorocyclobutyl ether) (BPFCB) and poly(1,1,1-triphenyl ethane perfluorocyclobutyl ether) (PFCB), are newly developed polymers with dielectric constants below 3.0. These two polymers have a similar backbone structure, but PFCB has the capability of crosslinking. To know the implications of these two polymers in the semiconductor industry, properties that are important for the integral reliability of Integral Circuits (IC), such as thermal and mechanical properties, should be understood. This comparative study shows that the crosslinking in perfluorocyclobutane aromatic ether polymer can reduce vertical thermal expansion and increase glass transition temperature (T_g) while water absorption, crystalline-like phase, and dielectric constant are slightly increased. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1383–1392, 1998     

Structure‐controlled synthesis of novel soluble and thermally stable poly (aryl ether nitrile ether ketone ketone)/poly (aryl ether nitrile ether ketone biphenyl ketone) copolymers by electrophilic polycondensation

One new synthesis route was first designed to synthesize the biphenyl acid chloride (BPACl), and then a series of novel poly (aryl ether nitrile ether ketone ketone) (PENEKK)/poly (aryl ether nitrile ether ketone biphenyl ketone) (PENEKBK) copolymers with different controlled structure compositions were synthesized by electrophilic polycondensation and varying the molar ratio of BPACl to terephthaloyl chloride (TPC). The obtained PENEKK/PENEKBK copolymers were characterized by different physical and chemical techniques. The results showed, the copolymers with 10–50% molar contents of biphenyl moities exhibited good thermal properties with glass transition temperatures (T_gs) of 184–196°C, decomposition temperatures (T_ds) of 498–515°C, and good solubility in organic solvents (N‐Methyl‐2‐pyrrolidone (NMP), N,N‐dimethylformamide (DMF), and DMSO), indicating that they would have good potential for solvent processing. The thin films of the polymers had tensile strengths of 93.6–101.5 MPa, Young's moduli of 3.03–3.32 GPa, elongations at break of 9–14%, indicating they were strong materials. The densities of the obtained polymers were 1.31–1.40 g/cm^?3, which were far lower than those of some main inorganic materials (such as Fe, nearly 7.8 g/cm^?3), indicating that they would have possible potential for substituting some inorganic materials used as high temperature materials in some areas due to the merits of lightweight. Thus, the copolymers with 10–50% molar contents of biphenyl moities were promising polymer materials. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis of Block Copolymers by Combination of Atom Transfer Radical Polymerization and Visible Light‐Induced Free Radical Promoted Cationic Polymerization

A new synthetic approach for the preparation of block copolymers by mechanistic transformation from atom transfer radical polymerization (ATRP) to visible light‐induced free radical promoted cationic polymerization is described. A series of halide end‐functionalized polystyrenes with different molecular weights synthesized by ATRP were utilized as macro‐coinitiators in dimanganese decacarbonyl [Mn₂(CO)₁₀] mediated free radical promoted cationic photopolymerization of cyclohexene oxide or isobutyl vinyl ether. Precursor polymers and corresponding block copolymers were characterized by spectral, chromatographic, and thermal analyses.     

Controlled radical polymerization by carboxyl‐ and hydroxyl‐terminated dithiocarbamates and xanthates

Carboxyl‐ and hydroxyl‐terminated dithiocarbamates and xanthates were practically synthesized. Carboxyl‐ and hydroxyl‐terminated polymers were made from them. These reversible addition–fragmentation chain transfer (RAFT) agents had low chain‐transfer constants that resulted in wider molecular distributions for the polymers. Nevertheless, kinetic studies showed that the polymerization behaved like a RAFT‐mediated process after a fast start. ¹H NMR and matrix‐assisted laser desorption/ionization spectra confirmed that the functional group or groups were cleanly transferred to the polymer end or ends. The copolymerization of methacrylates and acrylates could bring the former under control during radical polymerization. Block copolymers were synthesized through the condensation of the functional polymers with other types of functional polymers or through the condensation of the functional agents followed by radical polymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4298–4316, 2006     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996