Nitridation: A simple way to improve the catalytic performance of hierarchical porous ZSM-5 in benzene alkylation with methanol

Nitrided hierarchical porous ZSM-5 was synthesized by nitridation of hierarchical porous ZSM-5 with flowing ammonia at elevated temperature. The samples were characterized by XRD, SEM, Nitrogen sorption isotherms, NH₃-TPD and Py-IR, and evaluated in alkylation of benzene and methanol. The result indicated that the high specific surface area of parent ZSM-5 was maintained, while the Brönsted acidity was effectively adjusted by nitridation. Moreover, the high suppression of ethylbenzene was observed on nitrided catalyst and this could be attributed to the decrease of Brönsted acidity which suppressed the methanol to olefins reactions.     

NaOH改性ZSM-5分子筛在苯、甲醇烷基化反应中的应用

用NaOH溶液对高硅ZSM-5分子筛进行处理,考察其应用于苯-甲醇烷基化反应过程的最佳处理条件,并用XRD、SEM、XRF、NH3-TPD、TPO、BET等手段对试样进行表征。结果表明,NaOH在脱除分子筛硅物种的同时,也会脱出晶粒表面附着物,暴露出更多的酸性位,形成一定量的介孔,进而影响苯-甲醇烷基化性能。当NaOH处理量为2.4 mmol/gcat时,在液体积空速为85 h-1下,烷基化反应中苯的转化率达到38%,相比处理前提高了近16%,且积炭量低,稳定性好。     

改性ZSM-5-SBA-15及甲苯甲醇烷基化性能研究

通过浸渍法对ZSM-5进行金属M(M为Mg、Ni、Sr)改性,合成法制备了M-ZSM-5-SBA-15复合分子筛,采用XRD、N2吸附-脱附、FT-IR、NH3-TPD和Py-FTIR等技术对样品进行表征,考察了HZSM-5的硅铝比、不同金属对ZSM-5-SBA-15复合分子筛烷基化性能的影响。结果表明,HZSM-5的硅铝比为80时,ZSM-5-SBA-15复合分子筛的烷基化性能较好,Sr的引入钝化了ZSM-5-SBA-15(80)的强B酸中心,降低了B酸与L酸的比值,Sr-ZSM-5-SBA-15(80)的甲苯甲醇烷基化性能明显提高,甲苯转化率为30.15%,对二甲苯选择性为77.41%。     

ZSM-5-SBA-15复合分子筛制备及甲苯甲醇烷基化性能研究

采用后合成法制备了ZSM-5-SBA-15复合分子筛,通过XRD、FT-IR、BET、NH₃-TPD及吡啶红外等手段表征催化剂的性质。结果表明,ZSM-5-SBA-15既具有微孔结构又具有介孔结构。吡啶吸附和NH₃吸脱附实验结果表明,ZSM-5微孔分子筛的引入使SBA-15介孔分子筛的酸性增强,但与ZSM-5相比,ZSM-5-SBA-15复合分子筛的酸性位没有改变,酸强度有一定的减弱。用固定床评价了该复合分子筛甲苯甲醇烷基化反应的催化性能。结果表明,与常规ZSM-5相比,ZSM-5-SBA-15表现出了较高的对位选择性。     

Benzene alkylation with propane over metal modified HZSM-5

Propane alkylation with benzene over modified zeolite catalysts is one of the good ways for propane utilization. The catalytic performance over various metal modified HZSM-5 catalysts was studied. Addition of Pt or Zn resulted in remarkable increase of the activity. Addition of Mo depressed the activity, but greatly improved selectivity to aromatics, with the content of products from direct addition of propyl group to benzene (IPB and NPB) in the products reaching 81.5 mol%.     

多级孔ZSM-5分子筛的制备及催化噻吩烷基化性能研究

用不同浓度的Na₂CO₃溶液处理ZSM-5分子筛,采用XRD、XRF、SEM、N₂吸附脱附及NH₃-TPD方法对处理前后的ZSM-5分子筛进行表征,并考察了Na₂CO₃溶液处理对ZSM-5分子筛孔结构、酸性以及噻吩烷基化性能的影响。结果表明,Na₂CO₃溶液处理在保持ZSM-5分子筛微孔骨架结构的同时,增加了ZSM-5分子筛的比表面积、外表面积和介孔体积,并调变了酸性。Na₂CO₃溶液处理提高了ZSM-5分子筛催化剂的噻吩烷基化活性和噻吩选择性。一定反应条件下,随着Na₂CO₃溶液浓度增加,多级孔ZSM-5分子筛的噻吩烷基化性能逐渐提高,而噻吩选择性先增加后下降。当Na₂CO₃溶液浓度为2 mol/L时,分子筛的噻吩转化率和噻吩选择性分别为81.26 %和73.15%。当Na₂CO₃溶液浓度为3 mol/L时,噻吩转化率和选择性分别为90.57 %和72.59%。     

Effect of ZSM-5 zeolite morphology on the catalytic performance of the alkylation of toluene with methanol

A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaCl and crystal seed. X-ray diffraction(XRD),scanning electron microscope(SEM), X-ray fluorescence(XRF) and temperature-programmed desorption of ammonia(NH3-TPD) were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified sample showed the best stability among the tested three modified samples.     

Effect of ZSM-5 zeolite morphology on the catalytic performance of the alkylation of toluene with methanol

A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaCl and crystal seed. X-ray diffraction(XRD),scanning electron microscope(SEM), X-ray fluorescence(XRF) and temperature-programmed desorption of ammonia(NH3-TPD) were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified sample showed the best stability among the tested three modified samples.     

碱酸改性ZSM-5分子筛催化剂的噻吩烷基化反应性能研究

以SiO_2/Al_2O_3物质的量比为50的HZSM-5分子筛为原粉,经过一定浓度的NaOH溶液处理后再使用柠檬酸溶液进行酸洗以制备微孔-介孔多级孔HZSM-5催化剂,并研究其在模拟油中的噻吩烷基化反应性能。结果表明,使用柠檬酸溶液进行酸洗可以清除碱处理后孔道内残余的杂质。当柠檬酸溶液浓度为0.5 mol/L时,此时得到的HZ(AC-0.5)催化剂具有适宜的孔径和酸性,因而噻吩烷基化转化率最高,达到95.6%。在HZ(AC-0.5)催化剂上以苯并噻吩作为噻吩衍生物模型化合物,异戊二烯作为烯烃模型化合物,苯作为芳烃模型化合物,分别考察噻吩烷基化反应性能,并分析不同组分的模拟油对噻吩烷基化反应转化率和选择性的影响。结果表明,噻吩烷基化的最佳反应温度是120℃,在该温度下苯并噻吩烷基化的转化率高于噻吩烷基化的转化率,当异戊二烯作为烯烃模型化合物后噻吩的转化率会升高,当苯作为芳烃模型化合物后噻吩的转化率会降低。     

The alkylation reaction of benzene with methanol to produce toluene: Y-C and Y-CCs catalyst

The secondary reaction of toluene is difficult to be suppressed in benzene alkylation with methanol over conventional acidic zeolite catalysts. Moreover, the formation of coke yet remains a challenging problem. In this study, Na-Y zeolites were modified with ammonium carbonate (AC), citric acid (CA) and caesium nitrate(CN) to evaluate the alkylation of benzene with methanol, which was also characterized by XRD, SEM, FT-IR, N₂ adsorption and Py-IR. For the Na-Y treated with AC-CA-CN, not only the catalytic selectivity for the alkylation of benzene with methanol was improved (the total selectivity of toluene and xylene was 97.9% and toluene selectivity was 86.4%), but also the quantity of coke was greatly decreased.     

One-pot non-template synthesis of hierarchical ZSM-5 from kaolin source

Hierarchical ZSM-5 was synthesized without organic template and seed-assisted from the abundant natural source, kaolin, via the facile 1-step hydrothermal process. The hierarchical structure was able to be well-controlled solely on the Na₂O/Al₂O₃ ratio of the precursor. This method is not only simple but greener from the scientific point of view. As revealed, kaolin layered structure that dispersed in the highly alkaline NaOH medium prompts the formation of zeolite as the molecular organization is induced. The excess of NaOH acts as desilication agent after the formation of zeolite as proven by the ²⁹Si MAS NMR data.     

混合碱处理制备微介孔催化剂及其噻吩烷基化催化性能

以SiO_2/Al2O3物质的量比为50的H-ZSM-5分子筛为母体,分别采用Na_2CO_3溶液处理后加入TPAOH溶液进行二次晶化法以及Na_2CO_3/TPAOH混合溶液同时处理法,制备了微孔-介孔多级孔HZSM-5催化剂,对其噻吩烷基化反应催化性能进行了研究。结果表明,采用4 mol/L的Na_2CO_3溶液处理后的催化剂在TPAOH溶液中发生了二次晶化;当TPAOH溶液浓度为0.3 mol/L、晶化温度为170℃、晶化时间为24 h时,得到的HZ(CO_2-3-TPA+,0.3-24-170)催化剂具有适宜的孔径和酸性,其噻吩烷基化转化率最高(99.1%)。而Na_2CO_3/TPAOH同时处理HZSM-5分子筛所得的催化剂,由于生成大量SiO_2堵塞了孔道,覆盖了催化剂表面,降低了催化剂的平均孔径和酸性,不适合噻吩烷基化反应。     

ZSM-22分子筛的合成、表征及烷基化性能研究

通过不同合成方法制备聚束状、粗棒状和细棒状ZSM-22分子筛,采用XRD、SEM、BET、MAS NMR、NH_3-TPD及PyFTIR等表征手段对分子筛的形貌、织构、硅铝配位环境及酸性进行研究。以甲苯-甲醇烷基化制备对二甲苯为探针反应,考察不同形貌ZSM-22分子筛催化剂的催化性能。结果表明,不同形貌ZSM-22分子筛的晶胞参数、织构、硅铝配位环境及酸性等存在明显差异。聚束状ZSM-22分子筛由于各束之间的相互作用导致Si(4Si)配位结构发生变化,Al原子的嵌入导致T3和T4比例较高、T2较少,并表现出更多的L酸中心。在380℃反应温度下,聚束状ZSM-22分子筛催化剂在甲苯-甲醇烷基化反应转化率为16.7%时,对二甲苯选择性达到76.1%。     

Selective production of propylene from methanol over high-silica mesoporous ZSM-5 zeolites treated with NaOH and NaOH/tetrapropylammonium hydroxide

The influence of alkaline treatments with NaOH and NaOH/TPAOH mixtures on the physicochemical properties and catalytic performance of high-silica ZSM-5 zeolites (Si/Al = 175) during the methanol-to-propylene (MTP) reaction have been investigated. It was found that alkaline treatment in an NaOH/TPAOH solution with TPAOH/(NaOH + TPAOH) = 0.4 ensures the formation of narrow and uniform intracrystalline mesoporosity without severely damaging the crystal structure and the intrinsic acidity of the zeolite, leading to the best catalytic performance, including the highest propylene selectivity (47.2) and P/E ratio (4.97) as well as the longest catalyst lifetime (80 h).     

不同碱处理制备多级孔HZSM-5催化剂及噻吩烷基化性能研究

用Na₂CO₃、TPAOH和TPA⁺/CO₃^2-混合碱分别处理HZSM-5分子筛,采用FT-IR、XRD、XRF、N₂吸附脱附、SEM、NH₃-TPD及Py-FTIR表征手段对各类碱处理前后的HZSM-5分子筛进行表征。结果表明,3种类型的碱处理HZSM-5分子筛后,均能形成微孔-介孔多级孔道的HZSM-5(A)催化剂,并能调变催化剂的酸性,其中,TPA⁺/CO₃^2-混合碱处理得到的HZSM-5(TPA⁺/CO₃^2-)催化剂,比表面积最大,介孔数量最多。在小型固定床反应器上,考察了HZSM-5和HZSM-5(A)催化剂的噻吩烷基化性能,结果表明,HZSM-5(TPA⁺/CO₃^2-)催化剂因为具有适当的多级孔孔道和较多的B酸中心而表现出较高的噻吩转化率和1-己烯对噻吩的选择性。     

Toluene Alkylation to Selective Formation of p-Xylene over Co-Crystalline ZSM-12/ZSM-5 Catalyst

The alkylation of toluene with methanol to selective formation of p-xylene has been systematically studied. ZSM-12 (MTW)/ZSM-5 co-crystalline zeolite in 40:60 proportions have been synthesized by the same molar gel composition, but at different temperatures and periods than that of ZSM-12 and ZSM-5, separately. All the prepared samples are characterized by XRD, SEM, BET, and XRF. The activity of toluene alkylation was investigated with a mixture of toluene and methanol as a feed over the ZSM-12, ZSM-12/ZSM-5 co-crystalline, ZSM-5, and physical mixture of ZSM-12/ZSM-5. Prom characterization, it is observed that the ZSM-12/ZSM-5 co-crystalline material is different from that of ZSM-12, ZSM-5, and their physical mixture. Further, the ZSM-12/ZSM-5 co-crystalline zeolite produces the highest content of xylene and has better selectivity for p-xylene than ZSM-12, ZSM-5, and their physical mixture.     

不同粒径ZSM-5分子筛在苯与甲醇烷基化反应中催化性能及反应条件优化

采用水热合成法合成了不同粒径的ZSM-5分子筛催化剂,系统考察了分子筛粒径变化对苯与甲醇烷基化反应的影响。研究结果表明,随着ZSM-5分子筛粒径增大,不但苯的转化率和二甲苯选择性降低,而且催化剂稳定性明显下降。其中,粒径为0.25 μm的ZSM-5分子筛在苯烷基化反应中的催化性能最佳,且催化剂稳定性最好。另外,采用拉曼光谱和热重等方法对催化剂积碳物种和失活机理进行了深入研究,发现催化剂失活主要是由于反应过程中生成的大分子稠环芳烃堵塞了分子筛孔道并覆盖活性位点造成的。最后,考察了反应温度、原料组成及空速对苯烷基化反应的影响并优化出最佳的苯烷基化反应条件。     

无机胺合成ZSM-5沸石的结构表征和催化作用

分别以氨水和正丙胺为模板剂 ,在 177℃温度下静止晶化 5 0小时 ,合成出ZSM - 5沸石分子筛 .经XRD和IR测试 ,两者具有基本相同的结构 ;TG -DSC分析证明 ,两者都具有优良的热稳定性 .由于有机胺易氧化分解 ,故使得后者的腔内包含物氧化放热峰前移约 4 0℃ .合成的ZSM - 5沸石经用不同离子交换后 ,用于催化己烷芳构化反应     

ZSM-5分子筛催化苯与甲醇烷基化反应研究进展

我们综述了近年来苯和甲醇烷基化反应研究取得的进展.重点从ZSM-5催化剂的Si/Al、晶粒尺寸、改性等方面介绍了苯和甲醇烷基化催化剂的研究进展,总结并展望了苯和甲醇烷基化反应的研究方向,为ZSM-5分子筛催化剂的改性和苯-甲醇烷基化反应工艺创新提供参考.     

不同条件下苯与丙烯烷基化反应的催化剂失活研究

对不同条件下苯与丙烯烷基化反应Hβ催化剂的寿命、失活催化剂的积炭量和积炭性质进行了研究。在5.7MPa下,随反应温度变化,反应介质在反应过程中所经历的相态变化不同,导致催化剂的寿命、失活催化剂的积炭量和积炭的性质也存在着较大差异。300℃时,反应介质处于接近于体系临界点的超临界相或高压液相状态,催化剂寿命最长,积炭量大。失活催化剂积炭的元素分析及TPO-MS表征结果发现,积炭的碳氢比与反应温度有关,温度越高,碳氢比越高;而积炭的脱炭温度与反应时间（催化剂寿命）相关,催化剂寿命越长,相应的脱炭温度也越高。