酸性离子液体催化油酸酯化合成生物柴油简

酸性离子液体具有催化活性好、选择性高及易于回收等优点,是一种应用前景非常好的环境友好的酸性催化剂,在生物柴油合成反应中具有重大的理论意义和应用价值. 本文以油酸和甲醇为原料,探讨了7种不同酸性离子液体在生物柴油合成反应中的催化效应. 研究表明,离子液体酸性越强,催化酯化活性越高;引入磺酸基团可大大增强离子液体Brönsted酸性,使其在酯化反应中发挥溶剂/催化剂的双重作用,促进酯化反应向产物方向进行,达到高产率,因而1-丁基磺酸-3-甲基咪唑硫酸氢盐（[BHSO₃MIM]HSO₄）催化效果最好. 此外,系统研究了[BHSO₃MIM]HSO₄催化油酸与甲醇酯化反应,并采用响应面法优化了反应条件. 结果发现,该反应的最适醇酸摩尔比、催化剂用量、反应温度及反应时间分别为4：1,10%（基于油酸的质量）,130 ℃和4 h;在此条件下,生物柴油产率为97.7%. [BHSO₃MIM]HSO₄连续使用10批次后,仍能保持初始催化活性的95.6%,表现出极好的操作稳定性. 另外,利用该离子液体催化游离脂肪酸含量为72%的废油脂生产生物柴油,反应6 h可获得产率94.9%. 可见,[BHSO₃MIM]HSO₄在酯化生产生物柴油方面具有巨大的应用潜力.     

Chiral ionic liquid-catalyzed Biginelli reaction: stereoselective synthesis of polyfunctionalized perhydropyrimidines

A chiral ionic liquid-catalyzed, efficient and unprecedented version of the Biginelli reaction using new variants of its active methylene component, viz. 2-phenyl-1,3-oxazol-5-one/2-methyl-2-phenyl-1,3-oxathiolan-5-one, with aromatic aldehydes and urea/thiourea enantio- and diastereoselectively, yields 5-amino-/mercaptoperhydropyrimidines. This three-component domino cyclocondensation reaction is effected via ring transformation of an isolable intermediate in a one-pot procedure.     

A synthesis of diethyl alkylsulfanylmethylmalonates catalyzed by KOH in an ionic liquid

Abstract  1-Ethyl-3-methylimidazolium bromide was used as a green recyclable alternative to volatile organic solvents for KOH catalyzed three-component synthesis of diethyl alkylsulfanylmethylmalonates from aldehydes, diethyl malonate, and alkylthiols. Graphical Abstract  A synthesis of diethyl alkylsulfanylmethylmalonates catalyzed by KOH in an ionic liquid      

Pyrrole synthesis in ionic liquids by Paal-Knorr condensation under mild conditions

Paal-Knorr condensation of 2,5-hexandione with primary amines was successfully carried out in ionic liquids. Through investigating different ionic liquids, different reaction times, the reaction, using ionic liquids as solvent, exhibited simple product isolation procedure, improved yields and exclusive selectivity and the mild conditions and the avoidance of using toxic catalysts are also its special features. Recovery and reuse of ionic liquid are also satisfactory.     

Enzymatic polyester synthesis in ionic liquids

The enzymatic synthesis of polyesters by ring-opening polymerization (ROP) and polycondensation in three ionic liquids, i.e., [bmim][Tf₂N], [bmim][PF₆] and [bmim][BF₄] was investigated. For the enzymatic ROP of ε-caprolactone it was found that [bmim][PF₆] and [bmim][BF₄] result in an inhomogeneous reaction mixture upon polymerization, causing polymerization characteristics similar to bulk polymerization. In contrast, for [bmim][Tf₂N] characteristics similar to toluene were observed. Molecular weights of 7000-9500 g/mol were obtained. In the polycondensation of dimethyl adipate and dimethyl sebacate, respectively, with 1,4-butanol the low volatility of ionic liquids was successfully utilized to perform the reactions in an open vessel at temperatures close to the boiling point of the condensation by-product. Molecular weights up to 5400 g/mol were obtained. This, in combination with the tunable solvent hydrophilicity of ionic liquids could offer an advantage in the polymerization of highly polar monomers with low solubility in organic solvents.     

尿素醇解合成碳酸二甲酯过程中离子液体催化剂的含量分析

提出了尿素醇解合成碳酸二甲酯体系中1-甲基-3-丁基咪唑氯化锌离子液体催化剂的含量分析方法。采用紫外光谱法测定了离子液体催化剂的最大吸收波长,并建立了标准工作曲线,其线性相关系数为0.9986,方法的相对标准偏差RSD为2.5%,回收率为98.7%～102.4%。     

Microwave-assisted synthesis of novel imidazolium-based ionic liquid crystalline dimers

Microwave promoted synthesis of novel imidazolium-based ionic liquid crystalline dimers containing calamitic-calamitic, calamitic-discotic and discotic-discotic moieties is reported. Classical reactions failed to produce these dimers. The thermotropic liquid crystalline properties of these salts were investigated by polarizing optical microscopy, differential scanning calorimetry and X-ray diffractometry. These salts, except the one having calamitic-discotic units, with bromide as counter ion were found to be mesomorphic over a wide temperature range.     

Sulfur makes the difference: synthesis and mesomorphic properties of novel thioether-functionalized imidazolium ionic liquid crystals

Novel thioether-linked imidazolium ionic liquid crystals were synthesized starting from methyl 2-mercaptoacetate. The mesomorphic properties were determined by differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and X-ray diffraction. All mesogens displayed smectic A mesophase geometries with strongly interdigitated bilayer structures. Comparison of the thioether-linked imidazolium salts with the corresponding amine- and amide-linked imidazolium salts as well as simple N-alkyl-imidazolium salts showed that both mesophase width and stability increased with increasing softness of the linking unit, thus indicating the beneficial effect of sulfur. Additionally, an increase of the length of the linking unit decreased the interdigitation of the alkyl chains.     

Dimethyl carbonate synthesis catalyzed by DABCO-derived basic ionic liquids via transesterification of ethylene carbonate with methanol

Easily prepared DABCO-derived (1,4-diazobicyclo[2.2.2]octane) basic ionic liquids were developed for an efficient synthesis of dimethyl carbonate (DMC) via the transesterification of ethylene carbonate (EC) with methanol. 1-Butyl-4-azo-1-azoniabicyclo[2.2.2]octane hydroxide ([C₄DABCO]OH) exhibited high catalytic activity and 81% DMC yield together with 90% EC conversion was obtained under mild reaction conditions. Notably, the catalyst could be recycled for four times without loss of catalytic activity. Moreover, a possible mechanism was also discussed.     

Efficient synthesis of chlorohydrins: ionic liquid promoted ring-opening reaction of epoxides and TMSCl

The environmentally benign, highly efficient synthesis of chlorohydrins by cleavage of epoxides using TMSCl in ionic liquid, bmimPF₆, has been studied.     

Facile synthesis of thiourea derivatives in ionic liquid

The synthesis of cinnamoyl thiourea derivatives from cinnamoyl isothiocyanate (CIT) with substituted aniline (RC6H4NH2) was investigated in the mostly used ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, [Bmim][BF4]. Significant enhance-ments in reactivity, yield and reaction rate were achieved. The products could be recovered by simple filtration. [Bmim][BF4] couldbe recycled simply by removing water under vacuum and reused at least 9 times without significant decrease in activity.     

Task-specific ionic liquid-catalyzed efficient couplings of indoles with 1,3-dicarbonyl compounds: an efficient synthesis of 3-alkenylated indoles

Direct alkenylation of indoles at the 3-position with 1,3-dicarbonyl compounds under Brønsted acidic ionic liquid catalysis has been developed. The yields were excellent, and the catalyst can be reused at least six times without noticeable loss of catalytic activity.     

A green approach for efficient synthesis of N-substituted pyrroles in ionic liquid under microwave irradiation

A rapid synthesis of N-substituted pyrroles has been described by the reaction of 4-hydroxyproline with isatins in ionic liquid under microwave irradiation. The recovered ionic liquid was reused for six cycles. The reaction proceeds without the addition of any acid promoter     

Recent update on use of ionic liquids for enzyme immobilization,activation, and catalysis: A partnership for sustainability

Recent literature survey suggested that, ionic liquid not only possesses potential as a green solvent, but also plays a significant role in enzyme immobilization, activation, stabilization, and catalysis. Furthermore, biocatalysis in ionic liquids (IL) may be a key sustainable solution for the next generation chemical processes, which requisite extensive research efforts to expand the knowledge horizons in this field. In view of this, the present review highlights the recent update of potential applications of IL in biocatalysis for (i) biomass pretreatment/hydrolysis, (ii) enzyme immobilization-activation, (iii) organic transformation, (iv) bioremediation, and (v) biosensing. Moreover, this review also addresses the challenging issues and future outlook of this research area for the industrial development in near future.     

Catalytic application of task specific ionic liquid on the synthesis of benzoquinazolinone derivatives by a multicomponent reaction

Benzoquinazolin-2-one derivatives were synthesized by using a catalytic amount of task specific ionic liquid, [1-methyl-3-(4-sulfobutyl)imidazolium-4-methylbenzenesulfonate] through a one-pot multicomponent Biginelli reaction of α-tetralone, aldehyde, and urea/thiourea in excellent yields within a short reaction time. Mechanism studies suggest that the reaction proceeds through iminium intermediate and C2-H of the TSIL plays a major role on its catalytic activity. The catalyst has been reused four times without any significant loss in catalytic activity. Large scale reaction by using this TSIL suggests the applicability of this methodology for bulk synthesis of quinazolinone derivatives.     

The first ionic liquid-promoted Kabbe condensation reaction for an expeditious synthesis of privileged bis-spirochromanone scaffolds

A variety of privileged bis-spirochromanones were synthesized for the first time from 4,6-diacetyl resorcinol in one-pot by carrying out the Kabbe condensation in room temperature ionic liquid [bbim]Br.     

Development of a novel ionic support and its application in the ionic liquid phase assisted synthesis of a potent antithrombotic

The synthesis of ionic support 1 and its application in the preparation of a set of amides and sulfonamides is described. The potential of 1 is further exemplified by its use in a one-pot multistep ionic liquid phase assisted synthesis of tirofiban analogue 2.     

Recyclable zinc (II) ionic liquid catalyzed synthesis of azides by direct azidation of alcohols using trimethylsilylazide at room temperature

A new efficient method has been reported for the synthesis of azides by direct azidation of alcohols with TMSN₃ in presence of recyclable task specific ionic liquid (TSIL) [bmim]ZnCl₃ as a catalyst in DCM at room temperature. Ionic liquid [bmim]ZnCl₃ was synthesized under solvent free conditions and characterized by IR, ¹H NMR, ¹³C NMR and HRMS. The Lewis acidity of catalyst was also examined using IR spectroscopy. The main features of this new methodology are high yields of products, recyclability of catalyst, scalability of reaction to gram scale and short reaction time.     

The development of carbon capture by functionalized ionic liquids

The CO₂ capture by functionalized ionic liquids developed in recent years was critically reviewed, where the relationship between the capacity and the enthalpy as well as that between the structure and the viscosity were discussed. This work reviews with special emphasis on tuning the basicity and designing the structure for improving absorption properties, such as adjusting the capacity and energy consumption, and decreasing the viscosity of ionic liquid. Subsequently, some unconventional absorption phenomenon was also set out detailed. Finally, the recent efforts in understanding CO₂ absorption and the future research directions were outlined.     

Development of an ionic liquid-based dispersive liquid-liquid micro-extraction method for the determination of phthalate esters in water samples

Ionic liquid-based dispersive liquid-liquid micro-extraction (IL-DLLME) was coupled with high-performance liquid chromatography-ultraviolet (HPLC-UV) for the determination of four phthalate esters, including butyl benzyl phthalate, di-n-butyl phthalate, dicyclohexyl phthalate and bis(2-ethylhexyl) phthalate in water samples. The mixture of ionic liquid (IL) and dispersive solvent was rapidly injected into 10 mL aqueous sample. Then, IL phase was separated by centrifugation and was determined by high-performance liquid chromatography-ultraviolet. The factors influencing the extraction efficiency, such as type and volume of IL, disperse solvent, extraction time, centrifuging time and ionic strength, were investigated and optimized. Under the optimized conditions, the extraction recoveries by the proposed ionic liquid-based dispersive liquid-liquid micro-extraction for the four phthalates ranged from 83.0 to 91.7%. The relative standard deviations were between 7.8 and 15%. The limits of quantification for four phthalates were between 10.6 and 28.5 μg/L. The proposed method was successfully applied for the analysis of PAEs in tap, lake and treated wastewater samples.