Gas‐free initiators for high‐temperature free‐radical polymerization

Quaternary ammonium persulfates as free‐radical initiators for high‐temperature polymerization are synthesized and their shelf‐life stability investigated. These initiators do not have gaseous byproducts and are therefore ideal for frontal polymerization, a process in which polymeric materials are produced via a thermal front that propagates through the unreacted monomer/initiator solution. Quaternary ammonium persulfate initiators offer additional qualities such as high solubility in organic media and low volatility, which are desirable for frontal polymerization. The initiators are synthesized using two procedures, and the initiating efficacy of the respective products is compared to a peroxide initiator in the frontal polymerization of 1,6‐hexanediol diacrylate. Of all the quartenary ammonium persulfates synthesized, tricaprylmethylammonium (Aliquat) persulfate (APSO) is the best initiator for frontal polymerization because it is soluble in organic media, is very reactive, and does not produce volatile byproducts under decomposition. A study of the decomposition kinetics of APSO is performed, and frontal polymerization is proposed as a quicker analytical technique to assay the purity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3984–3990, 2000     

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles by dispersion polymerization

Poly(2‐hydroxyethyl methacrylate‐co‐N,O‐dimethacryloylhydroxylamine) particles were prepared by dispersion polymerization in toluene/2‐methylpropan‐1‐ol medium using cellulose acetate butyrate and dibenzoyl peroxide (BPO) as a steric stabilizer and initiator, respectively. The particle size was reduced with decreasing solvency of the reaction medium (more nuclei were generated) because the critical chain length of the precipitated oligomers decreased with an increasing toluene content, which is a poorer solvent for the polymer than 2‐methylpropan‐1‐ol. There is an optimum initiator concentration (2 wt % BPO relative to monomers) for producing low‐polydispersity particles under given conditions. Additionally, discrete spherical particles were obtained at a low monomer concentration and/or higher polymerization temperature. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1625–1632, 2002     

Rapid additive‐free TEMPO‐mediated stable free radical polymerizations of styrene

The stable free radical polymerization (SFRP) of styrene, initiated with benzoyl peroxide in the presence of TEMPO, under bulk conditions, is demonstrated to proceed rapidly without the need for any rate enhancing additives such as camphorsulfonic acid, 2‐fluoro‐1‐methyl pyridinium p‐toluenesulfonate, or acetic anhydride. Monomer conversions as high as 70% can be achieved in 5 h or less while maintaining polydispersity indexes of 1.15. These results stand in stark contrast to earlier reactions that required 70 h to achieve similar conversions. This study demonstrates that the single largest factor governing the rates of polymerization is the molar concentration of excess TEMPO remaining in solution after initiation. A reduction in the TEMPO to BPO ratio is required when large amounts of BPO are used to target low molecular weight polystyrenes. However, when a lower molar amount of BPO is used to obtain high molecular weight polystyrenes, a higher TEMPO to BPO ratio is required. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5487–5493, 2007     

Synthesis and radical polymerization behavior of bifunctional vinyl monomer derived from N‐vinylacetamide and p‐chloromethylstyrene

The radical polymerization of N‐(p‐vinylbenzyl)‐N‐vinylacetamide ( 1 ) prepared by the reaction of N‐vinylacetamide with p‐chloromethylstyrene was carried out by using radical initiators such as AIBN or BPO in benzene, chlorobenzene, or bulk. As a result, poly 1 was successfully isolated by dialysis (yield, 10–36%). The crosslinking reaction of poly 1 was carried out at 60–100 °C for 8 h. By using a radical initiator such as AIBN or BPO (3 mol %), the crosslinking reaction proceeded (yield, 63–79%). Moreover, the crosslinking reaction of poly 1 proceeded at 100 °C without a radical initiator in 50% yield. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2714–2723, 2006     

Chiral arylnickel complexes as highly active initiators for screw‐sense selective living polymerization of 1,2‐diisocyanobenzenes

Optically active chiral organonickel complexes served as efficient chiral initiators for living aromatizing polymerization of 1,2‐diisocyanobenzene derivatives, which afford optically active helical poly(quinoxaline‐2,3‐diyl)s up to 84% s.e. (screw‐sense excess). In comparison with asymmetric polymerization with the corresponding organopalladium initiators, the nickel initiators show a much greater polymerization rate, while the selectivity remains high. The organonickel initiators can be generated in situ from nickel(0) precursors with the corresponding enantiopure (S,S)‐2‐(4,5‐diphenylimidazolin‐2‐yl)phenyl chloride, leading to the convenient synthesis of highly stereo‐controlled poly(quinoxaline‐2,3‐diyl)s. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 898–904, 2010     

Micellar behavior of well‐defined polystyrene‐based block copolymers with triethoxysilyl reactive groups and their hydrolysis–condensation

Block copolymers of acryloxy propyl triethoxysilane and styrene were prepared through nitroxide‐mediated polymerization using alkoxyamine initiators based on N‐tert‐butyl‐1‐diethylphosphono‐2,2‐dimethylpropyl nitroxide. The copolymers were characterized by ¹H NMR, size exclusion chromatography and differential scanning calorimetry. Their micellar behavior in dioxane/methanol solutions was examined through static light scattering and transmission electron microscopy (TEM). TEM indicated the successful formation of spherical micelles which were subsequently frozen by the sol–gel process. Hydrolysis–condensation of the reactive ethoxysilyl side groups was followed by FTIR, ¹H NMR, and ²⁹Si NMR. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 784–793, 2010     

Spacer‐length‐dependent association in polymers with multiple‐hydrogen‐bonded end groups

Herein, we investigate the influence of spacer length on the homoassociation and heteroassociation of end‐functionalized hydrogen‐bonding polymers based on poly(n‐butyl acrylate). Two monofunctional ureido‐pyrimidinone (UPy) end‐functionalized polymers were prepared by atom transfer radical polymerization using self‐complementary UPy‐functional initiators that differ in the spacer length between the multiple‐hydrogen‐bonding group and the chain initiation site. The self‐complementary binding strength (K_dim) of these end‐functionalized polymers was shown to depend critically on the spacer length as evident from ¹H NMR and diffusion‐ordered spectroscopy. In addition, the heteroassociation strength of the end‐functionalized UPy polymers with end‐functionalized polymers containing the complementary 2,7‐diamido‐1,8‐naphthyridine (NaPy) hydrogen‐bond motif is also affected when the aliphatic spacer length is too short. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Evaluation of 5‐ethylidene‐2‐norbornene with an adhesion promoter for self‐healing applications

5‐Ethylidene‐2‐norbornene (ENB) has a potential application as part of a new generation of healing agents, owing to its rapid polymerization rate and wide liquid temperature range. In this study, we developed a new self‐healing system using ENB as the healing agent and methyl 5‐norbornene‐2‐carboxylate (MNC) as the adhesion promoter. Dynamic differential scanning calorimetry (DSC) was used to monitor cure behaviors of ENB with different MNC loadings, through which a series of cure temperatures were designed. The MNC loading and cure temperature had significant effects on the adhesion strength. The adhesion strength increased remarkably with MNC loadings of up to 10 wt % compared with ENB alone. The ENB monomer and the ENB/MNC mixture were successfully microencapsulated, and the resultant microcapsules were embedded into an epoxy resin along with Grubbs' catalyst for self‐healing efficiency measurements. Peak fracture loads for both healing agents showed maximal values at a low catalyst loading (0.3 wt %). In comparison with neat ENB, a significant improvement in healing efficiency was observed for the ENB/MNC mixture. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1170–1179     

In situ nitroxide‐mediated polymerization of styrene promoted by the N‐tert‐butyl‐α‐isopropylnitrone/bpo pair: ESR investigations

The styrene polymerization initiated by benzoyl peroxide (BPO) in the presence of N‐tert‐butyl‐α‐isopropylnitrone as nitroxide precursor is well‐controlled provided that a prereaction between the nitrone and BPO is carried out in suitable conditions prior to polymerization at a higher temperature. Electron spin resonance (ESR) spectroscopy was implemented to probe the nitroxides formed during both steps, that is, the prereaction and polymerization, and to get crucial information regarding the structure of the nitroxides responsible for the polymerization control. ESR studies combined with first principles calculations have evidenced that nitroxides observed during the prereaction in the presence of styrene and during the polymerization steps consist of a mixture of two macronitroxides. One is formed by the addition of a growing polystyrene chain to the nitrone as would be expected. However, the second one results from the addition of a polystyrene chain to tert‐butyl nitroso that is in situ formed presumably by decomposition of the first macronitroxide type. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation of isotactic‐rich poly(dimethyl vinylphosphonate) and poly(vinylphosphonic acid) via the anionic polymerization of dimethyl vinylphosphonate

A vinylphosphonate monomer, dimethyl vinylphosphonate (DMVP), has been polymerized by anionic initiators. Anionic polymerization of DMVP with tert‐butyllithium (t‐BuLi) in combination with a Lewis acid, tributylaluminum (n‐Bu₃Al), in toluene proceeded smoothly to give an isotactic‐rich poly(dimethyl vinylphosphonate) (PDMVP) with relatively narrow molecular weight distribution. Although all the PDMVPs were soluble in water, the isotactic‐rich PDMVP was insoluble in acetone and in chloroform which are good solvents for an atactic PDMVP prepared by radical polymerization. The isotactic‐rich PDMVP showed higher thermal property than that of the atactic PDMVP. Moreover, we successfully prepared poly(vinylphosphonic acid) (PVPA) through the hydrolysis of the isotactic‐rich PDMVP, which formed a highly transparent, self‐standing film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1677–1682, 2010     

Living polymerization of α‐amino acid‐N‐carboxyanhydrides

This article reviews recent developments in the polymerization of α‐amino acid‐ N‐carboxyanhydrides (NCAs) to form polypeptides. Traditional methods used to polymerize these monomers are described, and limitations in the utility of these systems for the preparation of polypeptides with controlled molecular weights and narrow molecular weight distributions are discussed. The development of transition‐metal‐based initiators, which activate the monomers to form covalent active species, permits the formation of polypeptides via the living polymerization of NCAs. In these systems, polymer molecular weights are controlled by monomer‐to‐initiator stoichiometry, polydispersities are low, and block copolypeptides can be prepared. The scope and limitations of these initiators and their key features and mode of operation are described in detail in this highlight. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3011–3018, 2000     

Well‐controlled amphiphilic block glycopolymers and their molecular recognition with lectins

The atom transfer radical polymerization of an unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]oxy}ethyl methacrylate (HEMAGl) is firstly reported. Controlled polymerizations were performed with the CuBr/N,N,N′,N′,N′‐pentamethyldiethylene triamine catalytic system with ethyl 2‐bromoisobutyrate and 1,2‐bis(bromoisobutyryloxy) ethane as mono and difunctional initiators in DMF solutions (80% w/w) at 40 and 50 °C, respectively. The polymerization of HEMAGl resulted in a controlled polymerization with linear kinetics, molecular weights which increase with conversion and narrow polydispersity indexes. Mono and difunctional PHEMAGl macroinitiators were used to synthesize the amphiphilic di and triblock glycopolymers with n‐butyl acrylate, verifying their living character. The self‐assembly of these glycopolymers in distilled water and in 0.1M NaCl solutions was studied by dynamic light scattering, showing the role of hydrogen bonds and the hydrophobic parts. In addition, their interaction with Concanavalin A lectin was examined, demonstrating the influence of molecular weight and copolymer composition. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3623–3631, 2010     

Ruthenium‐based metathesis initiators: Development and use in ring‐opening metathesis polymerization

For many years, olefin metathesis has been a central topic of industrial and academic research because of its great synthetic utility. The employed initiators cover a wide range of compounds, from simple transition‐metal salts to highly sophisticated and well‐defined alkylidene complexes. Currently, ruthenium‐based catalysts are at the center of attention because of their remarkable tolerance toward oxygen, moisture, and numerous functionalities. This article focuses on recent developments in the field of ring‐opening metathesis polymerization using ruthenium‐based catalysts. ruthenium‐based initiators and their applications to the preparation of advanced polymeric materials are briefly reviewed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2895–2916, 2002     

Synthesis of star polymers via nitroxide mediated free‐radical polymerization: A “core‐first” approach using resorcinarene‐based alkoxyamine initiators

The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007     

Synthesis and properties of star polymers with a C5‐symmetric bowl‐shaped aromatic core

We report the synthesis and properties of star polymers with a C₅‐symmetric aromatic core. For this, corannulene‐based penta‐substituted polymerization initiators were synthesized. These initiators were then used to polymerize cyclic ester and styrenic monomers via ring opening polymerization and free radical polymerization methods, respectively. Preliminary results suggest that these novel polymers can interact with fullerene, C₆₀, and the degree of interaction can be tuned by the chemical nature of the solvent. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cross‐linking induced thermoresponsive hydrogel with light emitting and self‐healing property

Development of self‐healing hydrogels with thermoresponse is very important for artificial smart materials. In this article, the self‐healing hydrogels with reversible thermoresponses were designed through across‐linking‐induced thermoresponse (CIT) mechanism. The hydrogels were prepared from ketone group containing copolymer bearing tetraphenyl ethylene (TPE) and cross‐linked by naphthalene containing acylhydrazide cross‐linker. The mechanical property, light emission, self‐healing, and thermo‐response of the hydrogels were investigated intensively. With regulation of the copolymer composition, the hydrogels showed thermoresponse with the LCST varied from above to below body temperature. At the same time, the hydrogels showed self‐healing property based on the reversible characteristic of the acylhydrazone bond. The hydrogel also showed temperature‐regulated light emission behavior based on AIE property of the TPE unit. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 869–877     

Oligopeptide‐based amide functional initiators for ATRP

Polymer–peptide conjugates are receiving significant interest. Here, we show that, under the appropriate conditions, a small family of oligopeptide‐based initiators can be used successfully to initiate the polymerization of methacrylic monomers by atom transfer radical polymerization (ATRP), generating new examples of such materials. However, the use of the peptidic amide‐based initiators results in polymers which have a higher molecular weight than expected and a significantly higher polydispersity than those prepared from ester‐based initiators. In many cases significant initiator remains, suggesting that either not all peptides successfully initiate polymerization or that significant termination reactions occur early in the reaction. This low initiator efficiency agrees with other reports for amino acid‐based initiators. It therefore appears that such amide‐based initiators can be used successfully, but have a significantly lower applicability than the more commonly used ester‐based initiators. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6082–6090, 2008     

Synthesis of novel tetrahydrofuran‐epichlorohydrin [poly(THF‐b‐ECH)] macromonomeric peroxy initiators by cationic copolymerization and the quantum chemically investigation of initiation system effects

Cationic polymerization of tetrahydrofuran (THF) and epichlorohydrin (ECH) was performed with peroxy initiators synthesized from bis (4,4′‐bromomethyl benzoyl peroxide (BBP) or bromomethyl benzoyl t‐butyl peroxy ester (t‐BuBP) and AgSbF₆ or ZnCl₂ system at 0 °C to obtain the poly(THF‐b‐ECH) macromonomeric peroxy initiators. Kinetic studies were accomplished for poly(THF‐b‐ECH) initiators. Poly(THF‐b‐ECH‐b‐MMA) and poly(THF‐b‐ECH‐b‐S) block copolymers were synthesized by bulk polymerization of methyl methacrylate (MMA) and styrene (S) with poly(THF‐b‐ECH) initiators. The quantum chemical calculations for the block copolymers, the initiating systems of the cationic polymerization of THF and ECH were achieved using HYPERCHEM 7.5 program. The optimized geometries of the polymers were investigated with the quantum chemical calculations. Poly(THF‐b‐ECH) initiators having peroxygen groups were used for graft copolymerization of polybutadien (PBd) to obtain poly(THF‐b‐ECH‐g‐PBd) crosslinked graft copolymers. The graft copolymers were investigated by sol‐gel analysis. Swelling ratio values of the graft copolymers in CHCl₃ were calculated. The characterizations of the polymers were achieved by FTIR, ¹H NMR, GPC, SEM, TEM, and DSC techniques. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2896–2909, 2010     

Ring‐opening polymerization of 1,3‐benzoxazines by p‐toluenesulfonates as thermally latent initiators

p‐Toluenesulfonic acid (TsOH) and several alkyl p‐toluenesulfonates, that is, methyl p‐toluenesulfonate (TsOMe), cyclohexyl p‐toluenesulfonate (TsOCH), and neopentyl p‐toluenesulfonate (TsONP), were evaluated as initiators for the ring‐opening polymerization of benzoxazines. TsOH and TsOMe were highly efficient initiators that induced the polymerization at 60 and 80 °C, respectively. In contrast, TsOCH and TsONP did not initiate the polymerization below 100 °C, while they induced the polymerization at elevated temperatures, 120 and 150 °C, respectively. When TsOCH was used as an initiator, the corresponding polymerization rate was comparable to that observed for the polymerization with using TsOH as an initiator. These results suggested that neutral TsOCH and TsONP can be regarded as “thermally latent initiators,” which underwent the thermal dissociation at the elevated temperatures to generate the corresponding alkyl cations and/or TsOH as the initiators of the polymerization. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile synthesis of self‐healing gel via magnetocaloric bottom‐ignited frontal polymerization

A series of the self‐healing gels facilely fabricated by VI (N‐vinyl imidazole) and MAH‐β‐CD (β‐cyclodextrin grafted vinyl carboxylic acid groups) via bottom‐ignited frontal polymerization (BIFP) initiated by magnetocaloric effect. Once ignited the bottom phase, the heat upward propagates to generate the “front” in the upper phase. Then, no further energy is added to maintain the reaction and the whole polymerization process experiences within minutes. In this system, the dependence of frontal velocity and temperature, along with morphology, swelling capacity, mechanical property, and self‐healing efficiency, on the preparation parameters is investigated. Interestingly, the gels show good swelling capacity in the organic solvent, comparatively almost no absorption in water. Moreover, the as‐prepared gels exhibit excellent auto‐healing properties without any external stimuli at ambient temperature. The healed sample possesses 97% recovery of its tensile strength after 8 h healing time, which relies largely on the host–guest interaction between VI and MAH‐β‐CD. The results demonstrate that FP can be utilized as an efficient and energy‐saving method to synthesize self‐healing supramolecular gels. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2585–2593