研究塑性有机固体的1H NMR方法

塑性有机固体的＾１Ｈ ＭＡＳ ＮＭＲ谱通常由一高分辨谱与一宽线谱组成，其中高分辨谱分量对应于塑性相，而宽线谱分量对应于刚性相。长延迟回波－ＭＡＳ ＮＭＲ实验可测得塑性相的高分辨谱，ＣＲＡＭＰＳ方法可测得整个固体＾１Ｈ体系的高分辨谱，常温下它往往以刚性相的贡献为主要成分。实验结果表明，结合＾１Ｈ ＭＡＳ、回波－ＭＡＳ与ＣＲＡＭＰＳ等三种固态高分辨＾１Ｈ ＮＭＲ技术可望成为深入研究塑性有机固体中塑性相     

多孔材料化学:从无机微孔化合物到金属有机多孔骨架

本文主要从无机微孔化合物和金属有机多孔骨架的合成化学和结构化学这两方面来介绍多孔材料化学的研究进展。多孔材料是一类具有规则孔结构的固态化合物,它们在催化、分离、离子交换等工业领域有着广泛的应用。硅铝酸盐是最为人们所熟知的微孔分子筛,经过半个多世纪的发展,人们又相继开发出磷酸盐、砷酸盐、锗酸盐、亚磷酸盐、硫酸盐、亚硒酸盐以及金属硫化物等类沸石无机微孔化合物。近十多年来,配位聚合物与金属有机多孔骨架开始大量兴起,为微孔化合物的多样化与组成的复杂性增添了新的领域。     

Microdosing on Evaporation from the Surface of a Porous Solid

The processes are examined that occur when dilute gas mixtures are prepared by the evaporation of a solution of impurities in an indifferent liquid solvent from the surface of a porous solid. Relationships between the concentrations of the impurities in the liquid and gas phases are given.     

Application of 1H NMR in the flow surveillance of oil wells

Test‐separator units, as traditional methods of well surveillance, mainly suffer from their inherent constraints including the expensive instrumental, mechanical, electrical, piping and safety devices along with technical and protective inspections, repair and operation services, facilities and infrastructures. Other problems are time and cost consuming, uncertainty of well isolation in test separator and need to close the co‐line wells, which are diminished using multivariate thermal well testing. A novel approach was proposed and tested to classify the oil samples taken from individual wells by source and type. The novelties of this work were the use of the applied aspects of ¹H NMR spectroscopy in petroleum upstream engineering, the replacement of traditional test methods, the improvement of the confidence of tests and the recognition of multisource streams. The weighed sum method was used to correlate the spectra information, taken from the samples of Iranian offshore oil wells. The experimental results and the field data revealed that the present approach was appropriate for precocious, quick and reliable surveillance of individual oil wells located in an oil field. The model was supported by field experiments and has predicted the accurate productivity of oil wells with respect to the current expensive techniques since 2010. Copyright © 2012 John Wiley & Sons, Ltd.     

Interpretation of NMR Relaxation as a Tool for Characterising the Adsorption Strength of Liquids inside Porous Materials

Nuclear magnetic resonance (NMR) relaxation times are shown to provide a unique probe of adsorbate–adsorbent interactions in liquid‐saturated porous materials. A short theoretical analysis is presented, which shows that the ratio of the longitudinal to transverse relaxation times (T₁/T₂) is related to an adsorbate–adsorbent interaction energy, and we introduce a quantitative metric e_surf (based on the relaxation time ratio) characterising the strength of this surface interaction. We then consider the interaction of water with a range of oxide surfaces (TiO₂ anatase, TiO₂ rutile, γ‐Al₂O₃, SiO₂, θ‐Al₂O₃ and ZrO₂) and show that e_surf correlates with the strongest adsorption sites present, as determined by temperature programmed desorption (TPD). Thus we demonstrate that NMR relaxation measurements have a direct physical interpretation in terms of the characterisation of activation energy of desorption from the surface. Further, for a series of chemically similar solid materials, in this case a range of oxide materials, for which at least two calibration values are obtainable by TPD, the e_surf parameter yields a direct estimate of the maximum activation energy of desorption from the surface. The results suggest that T₁/T₂ measurements may become a useful addition to the methods available to characterise liquid‐phase adsorption in porous materials. The particular motivation for this work is to characterise adsorbate–surface interactions in liquid‐phase catalysis.     

Application of two-dimensional NMR spectroscopy to the complete analysis of the 1H and 13C NMR spectra of d-biotin in aqueous solution

The ¹H and ¹³C NMR spectra of d-biotin were observed at 400 and 100 MHz, respectively. Various types of two-dimensional NMR spectroscopy were performed to assign the spectra. The previous assignment of ¹³C NMR spectrum of d-biotin reported by Bradbury and Johnson was modified, and the dihedral angles between the C? H bonds of the ring were determined. The populations of the conformers produced by internal rotation around the C-2? C-δ bond were estimated.     

Application of the multi-standard methodology for calculating 1H NMR chemical shifts

Gauge including atomic orbitals (GIAO) (1)H NMR chemical shift calculations have been performed for 66 organic compounds at 72 different levels of theory using the multi-standard approach (MSTD) previously developed for (13)C NMR. This straightforward computational technique involves the combination of methanol and benzene as standards. The studied methodology has been shown to predict (1)H NMR chemical shifts efficiently at different levels of theory.     

Homonuclear Decoupling in 1H NMR of Solids by Remote Correlation

The typical linewidths of ¹H NMR spectra of powdered organic solids at 111 kHz magic‐angle spinning (MAS) are of the order of a few hundred Hz. While this is remarkable in comparison to the tens of kHz observed in spectra of static samples, it is still the key limit to the use of ¹H in solid‐state NMR, especially for complex systems. Here, we demonstrate a novel strategy to further improve the spectral resolution. We show that the anti‐z‐COSY experiment can be used to reduce the residual line broadening of ¹H NMR spectra of powdered organic solids. Results obtained with the anti‐z‐COSY sequence at 100 kHz MAS on thymol, β‐AspAla, and strychnine show an improvement in resolution of up to a factor of two compared to conventional spectra acquired at the same spinning rate.     

1H NMR long-range coupling in the assignment of stereochemistry to 4-imidazolidinones

Long-range couplings were observed between protons attached to C-2 and C-5 of the 4-imidazolidinone ring. Since ⁴J(25) has a measurable value only for a trans arrangement of H-2 and H-5, this coupling can be utilized as an easy method of identification of 4-imidazolidinone stereoisomers.     

^1H NMR选择检测新技术用于新三萜皂苷的结构研究

从中药川续断根部的乙醇提取物中分得1个新的三萜皂苷,经过测定,其结构为:3-O-α-L-吡喃鼠李糖(1--3)-β-D-吡喃葡萄糖(1--3)-β-L-吡喃鼠李糖(1--2)-β-L-吡喃阿拉伯糖-常春藤苷元(1).研究表明,采用一维SEMDY和三照射NOE差谱NMR新技术相结合能以"拼凑"方式,测定糖链结构.方法简便、快速、测定结果可靠,重叠的信号可以指认,并且对样品不必进行化学降解或衍生化.本方法也可以用于其他类型的寡糖结构测定。     

Assignment of stereochemistry to cyclohexenylidenecyanoacetates by 1H NMR spectroscopy

The stereochemistry of various pairs of isomeric 2-cyclohexen-1-ylidenecyanoacetates was assigned using ¹H NMR spectroscopy. The isomers with the γ-methylene or the γ-vinyl protons cis to the carbalkoxy group were found to have the signals of these protons at approximately 0.3 ppm and 1 ppm, respectively, downfield relative to their geometrical isomers or the corresponding 2-cyclohexen-1-ylidenemalononitriles. The observation regarding the γ-vinyl proton proved useful for the assignment of configuration to cyclohex-enylidenecyanoacetates derived form cholest-4-en-3-one. The large and constant downfield shift (c. 1 ppm) of the γ-vinyl proton when cis to the ester group results from the rigid cyclohexenylidenecyanoacetate system, in which the vinylic proton can approach more closely to the magnetically anisotropic ester carbonyl group.     

Application of 1H and 13C NMR to the structural elucidation of tetrahydroquinoxalines condensed with five-membered heterocycles

¹H and ¹³C NMR spectral data for 21 N-methyltetrahydroquinoxalines annelated with furan, pyrrole, imidazole or thiazole rings are reported. Unambiguous assignments of the ring junction ¹³C resonances were made on the basis of selective decoupling experiments and with the aid of one-bond and long-range ¹³C–¹H coupling constants. The effects of five-membered heterocycles on the ¹H and ¹³C chemical shifts of the ring junction hydrogen and carbon atoms are considered. Values of one-bond ¹J(CH) and vicinal ³J(HH) coupling constants between the ring junction protons are also discussed as a diagnostic means for structural elucidation of tetrahydroquinoxalines condensed with five-membered heterocycles.     

离子液体在羰基化反应中的应用

离子液体由于具有良好的溶解能力、配位能力、热及化学稳定性、结构及性质可调、环境友好等特点,被认为是传统非环保型、有毒、污染严重的溶剂和催化剂潜在的替代品,已被广泛应用于有机合成及催化领域。本文综述了近年来离子液体在羰基化反应中的应用及催化反应机理研究进展,包括烯烃、醇类化合物、芳烃、胺/胺醇、卤代芳烃及甲醛的羰基化反应,羰基源主要包括CO、CO₂和碳酸二甲酯,涉及到了酸性离子液体、碱性离子液体、金属类离子液体、负载型离子液体等多种类型的功能化及非功能化离子液体。在上述反应中离子液体不仅可以提高反应活性和选择性,而且简化了催化剂分离过程,在部分反应中实现了回收和循环使用。并对羰基化反应的发展及应用前景进行了展望。     

1H NMR: a tool to study the fate of pollutants in the environment

In situ ¹H NMR, directly performed on biological fluids is a very powerful tool to study the fate of pollutants in the environment. The biodegradation of 2-aminobenzothiazole by Rhodococcus rhodochrous was monitored by reverse phase HPLC and by in situ ¹H NMR, methods performed directly on culture media without purification. The xenobiotic was biotransformed into a hydroxylated derivative. The chemical structure of this metabolite was determined by a long-range ¹H–¹⁵N heteronuclear shift correlation without any previous ¹⁵N enrichment of the compound. This approach allowed the assignment of the metabolite structure to 2-amino-6-hydroxybenzothiazole.     

The First Application of 1H NMR Spectroscopy for the Assessment of the Authenticity of Perfumes

The manufacture of counterfeit goods is one of the world’s largest underground businesses and is rapidly growing. Counterfeits can lead not only to the loss of profit for honest producers but also have a negative impact on consumers who pay excessive prices for poor quality goods that may result in health or safety problems. The perfume industry is constantly vulnerable to counterfeits, particularly in the fast developing market of “smell-alike” designer-inspired perfumes because these prompt the identification of the methods that classify their quality. In this paper, the application of proton nuclear magnetic resonance (¹H NMR) spectroscopy is employed for the first time to authenticate perfumery products. The molecular composition of several types of authentic brand fragrances for women was compared with cheap inspired equivalents and fakes. Our approach offers the prospect of a fast and simple method for detecting counterfeit perfumes using ¹H NMR spectroscopy.     

Application of the TORO technique of 1H NMR to the structural analysis of cyclic peptide isomers having a slightly distorted symmetry from C2

The extended TORO technique was applied to the structural analysis of endo-D-Tyr-gramicidin S, cyclo(-Val-Orn-Leu-D-Phe-D-Tyr-Pro-Val-Orn-Leu-D-Phe-Pro-), which has a slightly distorted symmetry from C2, by the insertion of D-Tyr and equivalent alpha-proton chemical shifts in the 1H NMR spectrum. All NMR signals of the two dominant isomers of this antibiotic with trans-trans prolines were determined by using the extended TORO technique with TOCSY and ROESY spectra. This technique is generally applicable for distinguishing overlapped signals of alpha- and amide protons from the main chains of peptides.     

Determination of the microstructure of polychloroprenes from 1H and 13C NMR data

Commercial samples of chloroprene rubbers were studied by high-resolution NMR spectroscopy (600 MHz). ¹H and ¹³C NMR proved to be efficient in quantitative analysis of the microstructure of polychloroprenes.