2H-NMR CHARACTERIZATION OF CLAY DISPERSION AND CONFINEMENT EFFECT ON PROBE MOLECULES IN RUBBER/CLAY NANOCOMPOSITE-GELS

 ²H-NMR spectroscopy of the probe molecule, deuterated benzene, was applied to characterize organo-clay dispersion and confinement effect on the local motion of benzene in rubber/clay nanocomposite-gels. The observed ²H line shapes of benzene in intercalated and exfoliated nanocomposites were obviously different, which can be used to estimate clay-dispersion quality. ²H-NMR line shapes also reflect the different influence of intercalated or exfoliated layered-silicates on local motions of benzene, implying that probe molecules exhibit different local motions depending on different confined geometry in these nanocomposites. Viscosity measurements further confirmed these NMR results.     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES

INTRODUCTIONIn recent years, polymer/clay nanocomposites have attracted great interest from researchers since they frequentlyexhibit unexpected hybrid properties synergistically derived from the two components. Compared to their microcounterparts and the pristine polymer matrix, polymer/clay nanocomposites exhibit improved tensile strength andmodulus, decreased thermal expansion coefficient, decreased gas permeability, increased swelling resistance,enhanced ion conductivity, and reduced fl…     

THE EFFECT OF CLAY DISPERSION ON THE CRYSTALLIZATION AND MORPHOLOGY OF POLYPROPYLENE／CLAY COMPOSITES

PP/clay composites with different dispersions, namely, exfoliated dispersion, intercalated dispersion and agglomerates and particle-like dispersion, were prepared by direct melt intercalation or compounding. The effect of clay dispersion on the crystallization and morphology of PP was investigated via PLM, SAXS and DSC. Experimental results show that exfoliated clay layers are much more efficient than intercalated clay and agglomerates of clay in serving as nucleation agent due to the nano-scale dispersion of clay, resulting in a dramatic decrease in crystal size (lamellar thickness and spherulites) and an increase of crystallization temperature and crystallization rate. On the other hand, a decrease of melting temperature and crystallinity was also observed in PP/clay composites with exfoliated dispersion, due to the strong interaction between PP and clay. Compared with exfoliated clay layers, the intercalated clay layers have a less important effect on the crystallization and crystal morphology. No effect is seen for samples with agglomerates and particle-like dispersion, in regard to melting temperature, crystallization temperature, crystal thickness and crystallinity.     

Non-isothermal crystallization kinetics of exfoliated and intercalated polyethylene/montmorillonite nanocomposites prepared by in situ polymerization

Polyethylene/montmorillonite (PE/MMT) nanocomposites, one intercalated sample with higher MMT content and one exfoliated sample with lower MMT content, were prepared by in situ polymerization using MMT-supported metallocene as catalyst. Non-isothermal crystallization behaviors of these two nanocomposites were investigated and compared. The exfoliated sample exhibits higher crystallization temperature (T_c) than the neat PE, showing nucleation effect of MMT. The intercalated sample has lower T_c than the neat PE due to the confinement of MMT. It is observed that the intercalated sample has longer induction period and faster overall crystallization rate, indicating co-existence of suppression and nucleation effects in this sample. The Avrami plots show that the crystal growth of PE in the intercalated sample is two-dimensional, while it is three-dimensional in the exfoliated sample. The crystallization activation energy of the intercalated sample is slightly smaller than that of the exfoliated sample.     

Impact of the clay organic modifier on the morphology of polymer–clay nanocomposites prepared by in situ free‐radical polymerization in emulsion

Poly(styrene‐co‐butyl acrylate) copolymers were prepared by free‐radical random copolymerization of styrene and butyl acrylate in emulsion in the presence of 10% of surface‐modified sodium montmorillonite (Na‐MMT). The objective of this work was to evaluate the impact of the clay organic modifier in terms of its chemical structure, its degree of interaction within the clay galleries surface, and its ability to copolymerize with monomers, on the morphology and properties of the final nanocomposite prepared. Na‐MMT was modified using different organic modifiers, namely: sodium 1‐allyloxy‐2‐hydroxypropyl (Cops), 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS), N‐isopropylacrylamide (NIPA), and sodium 11‐methacryloyloxy‐undecan‐1‐yl sulfate (MET), respectively. The morphology and properties of the nanocomposites obtained were found to be dependant on the clay organic modifier. X‐ray diffraction (XRD) and transmission electron microscopy indicated that, nanocomposites at 10% clay loading with Cops‐, NIPA‐, and MET‐modified clays, yielded intercalated to partially exfoliated structures, whereas AMPS‐modified clay gave a nanocomposite with a fully exfoliated structure. All polymer–clay nanocomposites were found to be more thermally stable than neat poly(S‐co‐BA) as were determined by TGA. However, nanocomposites with intercalated structures exhibited greater thermal stability relative to fully exfoliated ones. Furthermore, nanocomposites with exfoliated structures exhibited higher storage moduli (G^I) than partially exfoliated once, whereas intercalated structure showed the lowest G^I values. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3619–3628, 2008     

In situ preparation of hetero-polymers/clay nanocomposites by CUAAC click chemistry

A series of polymer/clay nanocomposites containing mechanistically two different polymers, poly(ethylene glycol) (PEG) and poly(epsilon caprolactone) (PCL), were prepared by simultaneous copper(I)-catalyzed alkyne-azide cycloaddition click reactions. Both clickable polymers, PEG-Alkyne and PCL-Alkyne, were simultaneously clicked on to azide-functional montmorillonite (MMT-N₃) nanoclay to get corresponding PEG-PCL/MMT nanocomposites. The chemical structures of the resulting nanocomposites were verified by following azide and silicone-oxygen bands using FT-IR and characteristic bands of PEG and PCL segments using ¹H-NMR spectroscopy. The combined XRD and TEM analysis confirmed that all PEG-PCL/MMT nanocomposites had partially exfoliated/intercalated morphologies. In addition, the increase of MMT-N₃ loading not only improved the onset and maximum degradation temperatures of the nanocomposites but also their char yields. Furthermore, the incorporation of MMT-N₃ in the polymer matrix did not significantly influence the crystallization behavior of both PEG and PCL segments.     

新型纳米层状硅酸盐Magadiite主体材料的制备、表征、结构和生成机理研究

利用简单的插层反应方法成功地制备了四丁基氢氧化铵(TBAOH)插层的层状硅酸盐Magadiite纳米复合材料,在室温下该材料溶胶放置30d可以保持稳定,粉体长期保存结构稳定,而且反应时间短,只需30min.利用XRD,FTIR,SEM和HRTEM等方法对样品进行了结构表征.结果表明,TBA⁺离子在层间以双分子层排列,并与层状硅酸盐结合在一起,TBAOH插层后的纳米粒子在玻璃片上进行了重组,粒径分布在10～100nm之间;HRTEM电镜照片进一步证实了剥离的层状硅酸盐纳米粒子在玻璃片上的自组装过程.根据实验结果阐述了TBAOH插层反应形成纳米溶胶的机理.     

Preparation,characterization and thermal behavior of poly(vinyl alcohol)/organic montmorillonite nanocomposites through solid-state shear pan-milling

In this study, the solid-state shear pan-milling was employed to prepare a series of polymer/layered silicate (PLS) nanocomposites. During the process of pan-milling at ambient temperature, poly(vinyl alcohol)/organic montmorillonite (PVA/OMMT) can be effectively pulverized, resulting in coexistence of intercalated and exfoliated OMMT layers. The obtained PLS nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). TEM analysis indicated that OMMT dispersed homogeneously in PVA matrix and XRD results illustrated that pan-milling had an obvious effect on increase in the interlayer spacing of OMMT, and resulted in coexistence of intercalated and exfoliated OMMT layers formed. Thermal gravimetric analysis showed that thermal stability of PVA was improved owing to the incorporation of OMMT. Thermal decomposition kinetics of PVA/OMMT nanocomposites with different milling cycles of OMMT was also studied. Two types of OMMT are chosen to compare the effect of hydrophilicity of OMMT on PVA/OMMT nanocomposites.     

Synthesis of poly(methyl methacrylate) nanocomposites via emulsion polymerization using a zwitterionic surfactant

The synthesis of nanocomposites via emulsion polymerization was investigated using methyl methacrylate (MMA) monomer, 10 wt % montmorillonite (MMT) clay, and a zwitterionic surfactant octadecyl dimethyl betaine (C18DMB). The particle size of the diluted polymer emulsion was about 550 nm, as determined by light scattering, while the sample without clay had a diameter of about 350 nm. The increase in the droplet size suggests that clay was present in the emulsion droplets. X-ray diffraction indicated no peak in the nanocomposites. Transmission electron microscopy showed that emulsion polymerization of MMA in the presence of C18DMB and MMT formed partially exfoliated nanocomposites. Differential scanning calorimetry showed an increase of 18 degrees C in the glass transition temperature (Tg) of the nanocomposites. A dynamic mechanical thermal analyzer also verified a similar Tg increase, 16 degrees C, for the partially exfoliated nanocomposites over poly(methyl methacrylate) (PMMA). Thermogravimetric analysis indicated a 37 degrees C increase in the decomposition temperature for a 20 wt % loss. A PMMA nanocomposite with 10 wt % C18DMB-MMT was also synthesized via in situ polymerization. This nanocomposite was intercalated and had a Tg 10 degrees lower than the emulsion nanocomposite. The storage modulus of the partially exfoliated emulsion nanocomposite was superior to the intercalated structure at higher temperatures and to the pure polymer. The rubbery plateau modulus was over 30 times higher for the emulsion product versus pure PMMA. The emulsion technique produced nanocomposites of the highest molecular weight with a bimodal distribution. This reinstates that exfoliated structures have enhanced thermal and mechanical properties over intercalated hybrids.     

Structure and mechanical properties of poly(l-lactide)/layered silicate nanocomposites

Poly(ε-caprolactone) (PCL) masterbatches with the intercalated and the exfoliated morphology were prepared by ring opening polymerization of ε-caprolactone in the presence of organomodified montmorillonite (MMT) Cloisite 30B. Poly(l-lactide) (PLLA) nanocomposites with Cloisite 30B or PCL masterbatches were prepared by melt blending. The effects of the silicate type, MMT content and the nanocomposite morphology on thermal and mechanical properties of PLLA nanocomposites were examined. The montmorillonite particles in PLLA/Cloisite 30B and PLLA/intercalated masterbatch nanocomposites were intercalated. In contrary to expectations, the exfoliated silicate layers of exfoliated masterbatch were not transferred into the PLLA matrix. Due to a low miscibility of PCL and PLLA, MMT remained in the phase-separated masterbatch domains. The stress-strain characteristics of PLLA nanocomposites, Young modulus E, yield stress σ_y and yield strain ε_y, decreased with increasing MMT concentration, which is associated with the increase in PCL content. The expected stiffening effect of MMT was low due to a low aspect ratio of its particles and was obscured by both plastifying effects of PCL and low PLLA crystallinity. Interestingly, in contrast to the neat PLLA, ductility was enhanced in all PLLA/Cloisite 30B materials and in PLLA/masterbatch nanocomposites with low MMT concentrations.     

Shear‐induced change of exfoliation and orientation in polypropylene/montmorillonite nanocomposites

For the improved dispersion of montmorillonite (MMT) in a polypropylene (PP) matrix, PP/MMT nanocomposites prepared via direct melt intercalation were further subjected to oscillating stress achieved by dynamic packing injection molding. The shear‐induced morphological changes were investigated with an Instron machine, wide‐angle X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The original nanocomposites possessed a partly intercalated and partly exfoliated morphology. A transformation of the intercalated structure into an exfoliated structure occurred after shearing, and a more homogeneous dispersion of MMT in the PP matrix was obtained. However, the increase of the exfoliated structure was accompanied by the scarifying of the orientation of MMT layers along the shear direction. Some bended or curved MMT layers were found for the first time by TEM after shearing. However, the orientation of PP chains in the PP/MMT nanocomposites became very difficult under an external shear force; this indicated that the molecular motion of PP chains intercalated between MMT layers was highly confined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1–10, 2003     

Studies of ABS-graft-maleic anhydride/clay nanocomposites: Morphologies, thermal stability and flammability properties

ABS-g-MAH (maleic anhydride) with different grafting degree, ABS/OMT (organo montmorillonite) and ABS-g-MAH/OMT nanocomposites were prepared via melt blending. The grafting reaction, phase morphology, clay dispersion, thermal properties, dynamic mechanical properties and flammability properties were investigated. FTIR spectra results indicate that maleic anhydride was successfully grafted onto butadiene chains of the ABS backbone in the molten state using dicumyl peroxide as the initiator and styrene as the comonomer and the relative grafting degree increased with increasing loading of MAH. TEM images show the size of the dispersed rubber domains of ABS-g-MAH increased and the dispersion is more uniform than that of neat ABS resin. XRD and TEM results show that intercalated/exfoliated structure formed in ABS-g-MAH/OMT nanocomposites and the rubber phase intercalated into clay layers distributed in both SAN phase and rubber phase. TGA results reveal the intercalated/exfoliated structure of ABS-g-MAH/OMT nanocomposites has better barrier properties and thermal stability than intercalated ones of ABS/OMT nanocomposites. The T_g of ABS-g-MAH/OMT nanocomposites was also higher than that of neat ABS/OMT nanocomposites. The results of cone measurements show that ABS-g-MAH/OMT nanocomposites exhibit significantly reduced flammability when compared to ABS/OMT nanocomposites even at the same clay content. The chars of ABS-g-MAH/OMT nanocomposites were tighter, denser, more integrated and fewer surface microcracks than ABS/OMT residues.     

Effects of heat and pressure on intercalation structures of isobutylene‐isoprene rubber/clay nanocomposites. I. Prepared by melt blending

In this work, the effects of heat and pressure on intercalated structures of isobutylene‐isoprene rubber/clay nanocomposites (IIRCNs) prepared by melt blending were investigated. Not only the local intercalated structures were monitored by wide‐angle X‐ray diffraction, but also the spatial distributions of intercalated structures were observed by transmission electron microscope. The experimental result reveals that the intercalated structures and their spatial distributions in the matrix are extensively altered by the thermal treatment at atmospheric or higher pressure. The possible microstructural models for untreated and treated IIRCNs were put forward. The observed phenomena were interpreted from the viewpoints of thermodynamics and kinetics theories as well as the feature of rubber. Finally, guidelines were proposed for designing curing system to achieve desired intercalated/exfoliated morphology. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2653–2664, 2005     

Graphite oxide-intercalated anionic clay and its decomposition to graphene-inorganic material nanocomposites

A graphite oxide-intercalated anionic clay (nickel zinc hydroxysalt) has been prepared using the aqueous colloidal dispersions of negatively charged graphite oxide sheets and aminobenzoate-intercalated anionic clay layers as precursors. When the two colloidal dispersions are reacted, the interlayer aminobenzoate ions are displaced from the anionic clay and the negatively charged graphite oxide sheets are intercalated between the positively charged layers of the anionic clay. The thermal decomposition of the intercalated solid at different temperatures yields graphene-metal oxide/metal nanocomposites. Electron microscopic analysis of the composites indicates that the nanoparticles are intercalated between the layers of graphite in many regions of these solids although the graphite layers are largely exfoliated and not stacked well together.     

An observation of accelerated exfoliation in iPP/organoclay nanocomposite as induced by repeated shear during melt solidification

A well‐exfoliated morphology is usually observed for polar polymer/clay nanocomposites via dynamic melt processing techniques, whereas only an intercalated or a partially intercalated/partially exfoliated morphology is often obtained for nonpolar polymer/clay nanocomposites, even though some polar compatibilzer is used. In this study, an accelerated exfoliation effect was observed for the first time in iPP/organoclay nanocomposites prepared through so‐called dynamic packing injection molding, in which the specimen is forced to move repeatedly in a chamber by two pistons that move reversibly with the same frequency as the solidification progressively occurs from the mold wall to the molding core part. The disordered level and exfoliated degree of clay was found to dramatically increase from the skin to the core of the prepared samples and eventually the WAXD reflections of interlayer d‐spacing diminished in the core. The changed degree of exfoliation was also proved directly by TEM observation. The prolongation of processing time, the gradual growth of solidification front, the increased melts viscosity, and the shear amplification effect were considered to explain the higher degree of exfoliation in the center zone of mold chamber. Our result suggests that a critical shear force may be needed to break down clay into exfoliated structure. This can be also well used to explain at least partially the intercalated morphology, which is commonly observed for nonpolar polymer/clay nanocomposites via conventional processing. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2005–2012, 2005     

Thermal and mechanical properties of syndiotactic polystyrene/organoclay nanocomposites with different microstructures

The fabrication of syndiotactic polystyrene (sPS)/organoclay nanocomposite was conducted via a stepwise mixing process with poly(styrene‐co‐vinyloxazolin) (OPS), that is, melt intercalation of OPS into organoclay followed by blending with sPS. The microstructure of nanocomposite mainly depended on the arrangement type of the organic modifier in clay gallery. When organoclays that have a lateral bilayer arrangement were used, an exfoliated structure was obtained, whereas an intercalated structure was obtained when organoclay with a paraffinic monolayer arrangement were used. The thermal and mechanical properties of sPS nanocomposites were investigated in relation to their microstructures. From the thermograms of nonisothermal crystallization and melting, nanocomposites exhibited an enhanced overall crystallization rate but had less reduced crystallinity than a matrix polymer. Clay layers dispersed in a matrix polymer may serve as a nucleating agent and hinder the crystal growth of polymer chains. As a comparison of the two nanocomposites with different microstructures, because of the high degree of dispersion of its clay layer the exfoliated nanocomposite exhibited a faster crystallization rate and a lower degree of crystallinity than the intercalated one. Nanocomposites exhibited higher mechanical properties, such as strength and stiffness, than the matrix polymer as observed in the dynamic mechanical analysis and tensile tests. Exfoliated nanocomposites showed more enhanced mechanical properties than intercalated ones because of the uniformly dispersed clay layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1685–1693, 2004     

Characterization of HDPE /Polyamide 6/ Nanocomposites Using Scanning-and Transmission Electron Microscopy

Summary: Preparation and morphology of high density polyethylene (HDPE)/ polyamide 6 (PA 6)/modified clay nanocomposites were studied. The ability of PA 6 in dispersing clays was used to prepare modified delaminated clays, which were then mixed with HDPE. Mixing was performed using melt processing in a torque rheometer equipped with roller rotors. After etching the materials with boiling toluene and formic acid at room temperature, the morphology was examined by SEM analyses, showing that the PA 6 formed the continuous phase and HDPE the dispersed phase. X-ray diffraction patterns show that the (001) peak of the clay is dramatically decreased and shifted to lower angles, indicating that intercalated/exfoliated nanocomposites are obtained. TEM analyses confirmed the typical structure of exfoliated nanocomposites. A scheme for the mechanism of exfoliation and/or intercalation of these HDPE /PA 6/ /organoclay nanocomposites is proposed.     

Spontaneous formation of an exfoliated polystyrene-clay nanocomposite using a star-shaped polymer

Mixtures of five-arm star polystyrene with an organoclay spontaneously formed exfoliated nanocomposites when annealed, validating a recent theoretical prediction by Singh and Balazs (Polym. Int. 2000, 49, 469.). An analogous linear polystyrene sample produced only an intercalated morphology under the same conditions. The nanocomposite morphologies were characterized by X-ray diffraction and transmission electron microscopy. These results suggest a general strategy for forming exfoliated nanocomposites in commodity polymers via melt compounding.     

三元乙丙橡胶/蒙脱土纳米复合材料制备中硫化体系的比较

采用了熔融插层和两种硫化体系硫磺 促进剂和过氧化物体系制备了三元乙丙橡胶 蒙脱土纳米复合材料 ,并将这两种体系形成的纳米复合材料进行了形态、力学性能和光学性能的比较 ,同时采用Flory Rehner方程对它们的硫化行为进行了评价 .X射线衍射 (XRD)、透射电镜 (TEM)、力学性能和光学性能的测试结果表明 ,由硫磺硫化体系制备的纳米复合材料为不透明和剥离型 .其原有的d0 0 1 衍射峰消失 ,有序层被剥离成 10 0～ 2 0 0nm的片层均匀分散在EPDM基体中 ,其力学性能有了极大的提高 ;而过氧化物体系制备的纳米复合材料为半透明和插层型 .对两种体系的硫化行为的评价结果表明 ,随着有机蒙脱土加入量的增加 ,硫磺 促进剂硫化体系的t90 延长 ,交联密度减小 ,最大 最小转矩也变小 ;而过氧化物硫化体系的相应值却变化不大