Mechanistic studies of O2 reduction effected by group 9 bimetallic hydride complexes

Synthetic and kinetic studies are used to uncover mechanistic details of the reduction of O(2) to water mediated by dirhodium complexes. The mixed-valence Rh(2)(0,II)(tfepma)(2)(CN(t)Bu)(2)Cl(2) (1, tfepma = MeN[P(OCH(2)CF(3))(2)](2), CN(t)Bu = tert-butyl isocyanide) complex is protonated by HCl to produce Rh(2)(II,II)(tfepma)(2)(CN(t)Bu)(2)Cl(3)H (2), which promotes the reduction of O(2) to water with concomitant formation of Rh(2)(II,II)(tfepma)(2)(CN(t)Bu)(2)Cl(4) (3). Reactions of the analogous diiridium complexes permit the identification of plausible reaction intermediates. Ir(2)(0,II)(tfepma)(2)(CN(t)Bu)(2)Cl(2) (4) can be protonated to form the isolable complex Ir(2)(II,II)(tfepma)(2)(CN(t)Bu)(2)Cl(3)H (5), which reacts with O(2) to form Ir(2)(II,II)(tfepma)(2)(CN(t)Bu)(2)Cl(3)(OOH) (6). In addition, 4 reacts with O(2) to form Ir(2)(II,II)(tfepma)(2)(CN(t)Bu)(2)Cl(2)(η(2)-O(2)) (7), which can be protonated by HCl to furnish 6. Complexes 6 and 7 were both isolated in pure form and structurally and spectroscopically characterized. Kinetics examination of hydride complex 5 with O(2) and HCl furnishes a rate law that is consistent with an HCl-elimination mechanism, where O(2) binds an Ir(0) center to furnish an intermediate η(2)-peroxide intermediate. Dirhodium congener 2 obeys a rate law that not only is also consistent with an analogous HCl-elimination mechanism but also includes terms indicative of direct O(2) insertion and a unimolecular isomerization prior to oxygenation. The combined synthetic and mechanistic studies bespeak to the importance of peroxide and hydroperoxide intermediates in the reduction of O(2) to water by dirhodium hydride complexes.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

CO为还原剂同时还原SO2和NO的SnO2-TiO2固溶体催化剂Ⅱ.催化剂的物理化学性质

 用XRD, XPS, CO-TPR, NH3-TPD, SO2-TPD和IR等方法表征了SnO2-TiO2固溶体催化剂的物理化学性质. 不同配比的SnO2和TiO2均可形成均一的具有金红石结构的连续固溶体,其晶粒度比单纯的SnO2或TiO2的晶粒度小. SnO2-TiO2固溶体的比表面积随SnO2含量的增大呈火山形变化,说明在SnO2-TiO2固溶体中SnO2可阻止TiO2由锐钛矿型变为金红石型过程中比表面积的减小,而TiO2则提供了维持大表面的结构框架. SnO2倾向于在固溶体表面偏析,固溶体的表面氧含量高于单纯SnO2的表面氧含量而低于单纯TiO2的表面氧含量. SnO2, TiO2和SnO2-TiO2表面含有能被CO还原的吸附氧和晶格氧,被还原的SnO2, TiO2和SnO2-TiO2的表面晶格氧的数量仅占所有晶格氧的0.001%, 说明CO只使部分晶格氧还原并生成氧阴离子空穴. TiO2表面没有酸性, SnO2和SnO2-TiO2呈微弱酸性. 经CO还原的SnO2-TiO2上存在大量的强碱中心,说明SnO2和TiO2之间发生了协同作用. SnO2-TiO2固溶体的这些物化性质均十分有利于SO2+NO+CO的氧化还原反应.     

多氟代烃类的反应II: 氟氯烯烃与三氯化铝的反应

研究了以CFCl2CF2CF=CF2(1)和CFCl2CF=CFCF2(2)为原料与三氯化铝的反应.结果获得重排产品CCl2=CF2CF2CF3(3).结果支持了从1到3的分子间重排反应的机理.在激烈条件下,3进一步与氯化铝反应得到CCl2=CFCCl2CF3(4),CCl2=CClCCl2CF3(5),CCl2=CClCCl2CClF(6),CCl2=CClCCl2CFCCl2(7)和CCl2=CClCCl2CCl3(8).由分离所得产品的结构可推断化合物3中氟原子被氯原子取代的稳定性按以下次序:CF3->CF=>=-CF2CF=.反应条件对产品得率的影响也被讨论了.     

One-electron-transfer reactions of polychlorinated ethylenes: concerted and stepwise cleavages

Reaction barriers were calculated by using ab initio electronic structure methods for the reductive dechlorination of the polychlorinated ethylenes: C2Cl4, C2HCl3, trans-1,2-C2H2Cl2, cis-1,2-C2H2Cl2, 1,1-C2H2Cl2 and C2H3Cl. Concerted and stepwise cleavages of R-Cl bonds were considered. Stepwise cleavages yielded lower activation barriers than concerted cleavages for the reduction of C2Cl4, C2HCl3, and trans-1,2-C2H2Cl2 for strong reducing agents. However, for typical ranges of reducing strength concerted cleavages were found to be favored. Both gas-phase and aqueous-phase calculations predicted C2Cl4 to have the lowest reaction barrier. Additionally, the reduction of C2HCl3 was predicted to show selectivity toward formation of cis-1,2-C2HCl2* over the formation of trans-1,2-C2HCl2*, and 1,1-C2HCl2* radicals.     

Oxidation studies of dipositive actinide ions, An2+ (An = Th, U, Np, Pu, Am) in the gas phase: synthesis and characterization of the isolated uranyl, neptunyl, and plutonyl ions UO2(2+)(g), NpO2(2+)(g), and PuO2(2+)(g)

Reactions of atomic and ligated dipositive actinide ions, An2+, AnO2+, AnOH2+, and AnO2(2+) (An = Th, U, Np, Pu, Am) were systematically studied by Fourier transform ion cyclotron resonance mass spectrometry. Kinetics were measured for reactions with the oxidants, N2O, C2H4O (ethylene oxide), H2O, O2, CO2, NO, and CH2O. Each of the five An2+ ions reacted with one or more of these oxidants to produce AnO2+, and reacted with H2O to produce AnOH2+. The measured pseudo-first-order reaction rate constants, k, revealed disparate reaction efficiencies, k/k(COL): Th2+ was generally the most reactive and Am2+ the least. Whereas each oxidant reacted with Th2+ to give ThO2+, only C2H4O oxidized Am2+ to AmO2+. The other An2+ exhibited intermediate reactivities. Based on the oxidation reactions, bond energies and formation enthalpies were derived for the AnO2+, as were second ionization energies for the monoxides, IE[AnO+]. The bare dipositive actinyl ions, UO2(2+), NpO2(2+), and PuO2(2+), were produced from the oxidation of the corresponding AnO2+ by N2O, and by O2 in the cases of UO2+ and NpO2+. Thermodynamic properties were derived for these three actinyls, including enthalpies of formation and electron affinities. It is concluded that bare UO2(2+), NpO2(2+), and PuO2(2+) are thermodynamically stable toward Coulomb dissociation to [AnO+ + O+] or [An+ + O2+]. It is predicted that bare AmO2(2+) is thermodynamically stable. In accord with the expected instability of Th(VI), ThO(2+) was not oxidized to ThO2(2+) by any of the seven oxidants. The gas-phase results are compared with the aqueous thermochemistry. Hydration enthalpies were derived here for uranyl and plutonyl; our deltaH(hyd)[UO2(2+)] is substantially more negative than the previously reported value, but is essentially the same as our deltaH(hyd)[PuO2(2+)].     

Reactivity of bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin with CO(2), OCS, and CS(2) and comparison to that of bis[bis(trimethylsilyl)amido]tin

The heterocumulenes carbon dioxide (CO(2)), carbonyl sulfide (OCS), and carbon disulfide (CS(2)) were treated with bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin {[(CH(2))Me(2)Si](2)N}(2)Sn, an analogue of the well-studied bis[bis(trimethylsilyl)amido]tin species [(Me(3)Si)(2)N](2)Sn, to yield an unexpectedly diverse product slate. Reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CO(2) resulted in the formation of 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane, along with Sn(4)(μ(4)-O){μ(2)-O(2)CN[SiMe(2)(CH(2))(2)]}(4)(μ(2)-N═C═O)(2) as the primary organometallic Sn-containing product. The reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CS(2) led to formal reduction of CS(2) to [CS(2)](2-), yielding [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn, in which the [CS(2)](2-) is coordinated through C and S to two tin centers. The product [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn also contains a novel 4-membered Sn-Sn-C-S ring, and exhibits a further bonding interaction through sulfur to a third Sn atom. Reaction of OCS with {[(CH(2))Me(2)Si](2)N}(2)Sn resulted in an insoluble polymeric material. In a comparison reaction, [(Me(3)Si)(2)N](2)Sn was treated with OCS to yield Sn(4)(μ(4)-O)(μ(2)-OSiMe(3))(5)(η(1)-N═C═S). A combination of NMR and IR spectroscopy, mass spectrometry, and single crystal X-ray diffraction were used to characterize the products of each reaction. The oxygen atoms in the final products come from the facile cleavage of either CO(2) or OCS, depending on the reacting carbon dichalogenide.     

Synthesis, structure, and electrocatalysis of diiron C-functionalized propanedithiolate (PDT) complexes related to the active site of [FeFe]-hydrogenases

New C-functionalized propanedithiolate-type model complexes (1-8) have been synthesized by functional transformation reactions of the known complex [(mu-SCH2)2CH(OH)]Fe2(CO)6 (A). Treatment of A with the acylating agents PhC(O)Cl, 4-pyridinecarboxylic acid chloride, 2-furancarbonyl chloride, and 2-thiophenecarbonyl chloride in the presence of Et3N affords the expected C-functionalized complexes [(mu-SCH2)2CHO2CPh]Fe2(CO)6 (1), [(mu-SCH2)2CHO2CC5H4N-4]Fe2(CO)6 (2), [(mu-SCH2)2CHO2CC4H3O-2]Fe2(CO)6 (3), and [(mu-SCH2)2CHO2CC4H3S-2]Fe2(CO)6 (4). However, when A is treated with the phosphatizing agents Ph2PCl, PCl3 and PBr3, both C- and Fe-functionalized complexes [(mu-SCH2) 2CHOPPh2-eta1]Fe2(CO)5 (5), [(mu-SCH2) 2CHOPCl2-eta1]Fe2(CO)5 (6), and [(mu-SCH2) 2CHOPBr2-eta1]Fe2(CO)5 (7) are unexpectedly obtained via intramolecular CO substitution by P atoms of the initially formed phosphite complexes. The simplest C-functionalized model complex [(mu-SCH2) 2CO]Fe2(CO)6 (8) can be produced by oxidation of A with Dess-Martin reagent. While 8 is found to be an electrocatalyst for proton reduction to hydrogen, starting complex A can be prepared by another method involving the reaction of HC(OH)(CH2Br)2 with the in situ generated (mu-LiS) 2Fe2(CO)6. X-ray crystallographic studies reveal that the bridgehead C atom of 8 is double-bonded to an O atom to form a ketone functionality, whereas the bridgehead C atoms of A, 1, 3, and 4 are equatorially-bonded to their functionalities and those of 5-7 axially-bonded to their functionalities due to formation of the corresponding P-Fe bond-containing heterocycles.     

亚硫酸四氟乙二醇酯的环断裂反应

含有亚硫酸四氟乙二醇酯(1)的四氟乙烷磺内酯(2)与H(CF_2)_4CH_2OH和三乙胺反应可获得草酸酯(CO_2CH_2CF_2CF_2—CF_2CF_2H)_2(3)。化合物(3)生成的机理解释为由于1的破环,生成了SOF_2和(COF)_2,后者进一步与H(CF_2)_4CH_2OH反应生成3。 3与二乙胺反应生成Et_2NCOCO_2CH_2(CF_2)_4H(4)。3和4皆为新化合物。     

A Raman and infrared spectroscopic study of the uranyl silicates--weeksite, soddyite and haiweeite

Raman spectroscopy has been used to study the molecular structure of a series of selected uranyl silicate minerals, including weeksite K2[(UO2)2(Si5O13)].H2O, soddyite [(UO2)2SiO4.2H2O] and haiweeite Ca[(UO2)2(Si5O12(OH)2](H2O)3 with UO2(2+)/SiO2 molar ratio 2:1 or 2:5. Raman spectra clearly show well resolved bands in the 750-800 cm-1 region and in the 950-1000 cm-1 region assigned to the nu1 modes of the (UO2)2+ units and to the (SiO4)4- tetrahedra. For example, soddyite is characterized by Raman bands at 828.0, 808.6 and 801.8 cm-1 (UO2)2+ (nu1), 909.6 and 898.0 cm-1 (UO2)2+ (nu3), 268.2, 257.8 and 246.9 cm-1 are assigned to the nu2 (delta) (UO2)2+. Coincidences of the nu1 (UO2)2+ and the nu1 (SiO4)4- is expected. Bands at 1082.2, 1071.2, 1036.3, 995.1 and 966.3 cm-1 are attributed to the nu3 (SiO4)4-. Sets of Raman bands in the 200-300 cm-1 region are assigned to nu2 (delta) (UO2)2+ and UO ligand vibrations. Multiple bands indicate the non-equivalence of the UO bonds and the lifting of the degeneracy of nu2 (delta) (UO2)2+ vibrations. The (SiO4)4- tetrahedral are characterized by bands in the 470-550 cm-1 and in the 390-420 cm-1 region. These bands are attributed to the nu4 and nu2 (SiO4)4- bending modes. The minerals show characteristic OH stretching bands in the 2900-3500 cm-1 and 3600-3700 cm-1.     

Hydrogen NMR of H2-TDF-D2O clathrate

The three-component clathrate H2-TDF-D2O offers hydrogen storage at lower pressure, but with reduced weight fraction of H2, compared to H2-H2O clathrate. In H2-TDF-D2O, H2 resides exclusively and singly in the small cages of structure II, allowing the rotational behavior of H2 in this nominally uniform environment to be probed. Here we report NMR measurements of the H2 line shape and relaxation times T1, T2, and T1rho. The principal differences in the results, compared to the H2-D2O binary system, are the dips in T2 and T1rho near 28 K due to thermally activated reorientation of TDF molecules, line-narrowing and decreases in T2 and T1rho near 175 K due to D2O reorientations and diffusion, and the apparent absence of H2 diffusion between small cages.     

Bimetallic Ruthenium PNP Pincer Complex As a Platform to Model Proposed Intermediates in Dinitrogen Reduction to Ammonia

A series of ruthenium complexes was isolated and characterized in the course of reactions aimed at studying the reduction of hydrazine to ammonia in bimetallic systems. The diruthenium complex {[HPNPRu(N(2))](2)(μ-Cl)(2)}(BF(4))(2) (2) (HPNP = HN(CH(2)CH(2)P(i)Pr(2))(2)) reacted with 1 equiv of hydrazine to generate [(HPNPRu)(2)(μ(2)-H(2)NNH(2))(μ-Cl)(2)](BF(4))(2) (3) and with an excess of the reagent to form [HPNPRu(NH(3))(κ(2)-N(2)H(4))](BF(4))Cl (5). When phenylhydrazine was added to 2, the diazene species [(HPNPRu)(2)(μ(2)-HNNPh)(μ-Cl)(2)](BF(4))(2) (4) was obtained. Treatment of 2 with H(2) or CO yielded {[HPNPRu(H(2))](2)(μ-Cl)(2)}(BF(4))(2) (7) and [HPNPRuCl(CO)(2)]BF(4) (8), respectively. Abstraction of chloride using AgOSO(2)CF(3) or AgBPh(4) afforded the species [(HPNPRu)(2)(μ(2)-OSO(2)CF(3))(μ-Cl)(2)]OSO(2)CF(3) (9) and [(HPNPRu)(2)(μ-Cl)(3)]BPh(4) (10), respectively. Complex 3 reacted with HCl/H(2)O or HCl/Et(2)O to produce ammonia stoichiometrically; the complex catalytically disproportionates hydrazine to generate ammonia.     

Noble-gas-induced disproportionation reactions: facile superoxo-to-peroxo conversion on chromium dioxide

Laser-evaporated chromium atoms are shown to insert into dioxygen to form CrO 2 in solid argon. Annealing allows diffusion and reactions to form (eta (2)-O 2) 2CrO 2, which is characterized as [(O 2 (-)) 2(CrO 2) (2+)], a side-on bonded disuperoxo-chromium dioxide complex. The (eta (2)-O 2) 2CrO 2 complex further reacts with xenon atom doped in solid argon to give (eta (1)-OO)(eta (2)-O 2)CrO 2(Xe), which can be regarded as an O 2 molecule weakly interacting with [(O 2) (2-)(CrO 2) (2+)Xe], a side-on bonded peroxo-chromium dioxide-xenon complex. The results indicate surprisingly that xenon atom induces a disproportionation reaction from superoxo to peroxo and dioxygen complex.     

Ground electronic states of RbO2+, CsO2+ and FrO2: the ionization energies of RbO2 and CsO2

Calculations are performed to establish the ground electronic states of RbO2+, CsO2+, and FrO2. In the case of the cations, both linear and C2v orientations were considered; for FrO2, the two lowest electronic states, 2A2 and 2B2, were considered in C2v symmetry. In addition, calculations were also performed on the x2 A2 ground states of RbO2 and CsO2 to derive ionization energies. Binding energies and heats of formation are also derived. The bonding in FrO2 is found to be less ionic than that of RbO2 and CsO2.     

Regioselective and reversible carbon-nitrogen bond formation: synthesis, structure and reactivity of ureato-bridged complexes [Mo2(NAr)2(mu-X){mu-ArNC(O)NAr}(S2CNR2)2](Ar = Ph, p-tol; X = S, NAr; R = Me, Et, Pr)

Reaction of ArNCO with syn-[MoO(mu-O)(S2CNR2)]2 or syn-[MoO(mu-NAr)(S2CNR2)]2 at 110 degrees C leads to the facile formation of bridging ureato complexes [Mo2(NAr)2(mu-NAr){mu-ArNC(O)NAr}(S2CNR2)2](Ar = Ph, p-tol; R = Me, Et, Pr), formed upon substitution of all oxo ligands and addition of a further equivalent of isocyanate across one of the bridging imido ligands. Related sulfido-bridged complexes [Mo2(NAr)2(mu-S){mu-ArNC(O)NAr}(S2CNR2)2] have been prepared from syn-[Mo2O2(mu-O)(mu-S)(S2CNR2)2]. When reactions with syn-[MoO(mu-NAr)(S2CNEt2)]2 were followed by NMR, intermediates were observed, being formulated as [Mo2O(NAr)(mu-NAr){mu-ArNC(O)NAr}(S2CNEt2)2], which at higher temperatures convert to the fully substituted products. A crystallographic study of [Mo2(N-p-tol)2(mu-S){mu-p-tolNC(O)N-p-tol}(S2CNPr2)2] reveals that the bridging ureato ligand is bound asymmetrically to the dimolybdenum centre-molybdenum-nitrogen bonds trans to the terminal imido ligands being significantly elongated with respect to those cis-a result of the trans-influence of the terminal imido ligands. This trans-influence also leads to a trans-effect, whereby the exchange of aryl isocyanates can occur in a regioselective manner. This is followed by NMR studies and confirmed by a crystallographic study of [Mo2(N-p-tol)2(mu-N-p-tol){mu-p-tolNC(O)NPh}(S2CNEt2)2]--the PhNCO occupying the site trans to the terminal imido ligands. Ureato complexes also react with PhNCS, initially forming [Mo2(NAr)2(mu-S){mu-ArNC(O)NAr}(S2CNR2)2], resulting from exchange of the bridging imido ligand for sulfur, together with small amounts of [Mo2(NAr)2(mu-S)(mu-S2)(S2CNEt2)2], containing bridging sulfide and disulfide ligands. The ureato complexes [Mo2(NAr)2(mu-S){mu-ArNC(O)NAr}(S2CNR2)2] react further with PhNCS to give [Mo2(NAr)2(mu-S)2(S2CNR2)2]n (n = 1, 2), which exist in a dimer-tetramer equilibrium. In order to confirm these results crystallographic studies have been carried out on [Mo2(N-p-tol)2(mu-S)(mu-S2)(S2CNEt2)2] and [Mo2(N-p-tol)2(mu-S)2(S2CNPr2)2]2.     

Synthesis, structural and spectroscopic characterization, catalytic properties, and thermal transformations of new cyclic di- and trisiloxanediolato tantalum complexes

The reaction between Ta(OEt)5 and 1,1,3,3-tetramethyl-1,3-disiloxanediol, (HOSiMe2OSiMe2OH), leads to new siloxy complexes in which the dimeric nature of Ta(OEt)5 is maintained with both bridging ethoxide and disiloxanediolato bridges. With equal amounts of the reagents, two terminal OEt groups are replaced to form [Ta(OEt)2]2(mu-OEt)2(mu-OSiMe2OSiMe2O)2, 1, whereas with an excess of diol, the remaining terminal OEt groups are also replaced but with a trisiloxanediolato unit to form [Ta(OSiMe2OSiMe2OSiMe2O)]2(mu-OEt)2(mu-OSiMe2OSiMe2O)2, 2. Complexes 1 and 2 catalyze the transformation of HOSiMe2OSiMe2OH to polysiloxanes. Thermal treatment of 1 results in the formation of a 1:2 mixture of Ta2O5/SiO2; no new phases are observed. The molecular structures of 1 and 2 are confirmed by X-ray crystallography.     

Study on the interactions between anti-tumor metal complexes and mononucleotides using trans-[en2Os(η2-H2)(CF3SO3)](CF3SO3) as a 1H NMR probe in a competitive mode

The interaction of several anti-tumor metal complexes with dGMP have been investigated using trans-[en2Os(η2-H2)]2+ as a 1H NMR probe in a competitive mode. Me2SnCl2, Bu2SnCl2, Et2Sn(phen)Cl2 and Et2SnCl2 can bind to dGMP mainly via phosphate; Cp2TiCl2 binds to dGMP mainly via phosphate and N7. The binding constant for (CH3)2SnCl2 binding to phosphate of dGMP exceeds 2.71×104. The binding constant for Cp2TiCl2 to phosphate is even greater than that of Sn(IV). Cis-platin has high affinity for both N7 and phosphate, but mainly for N7. Binding of the probe to N7 of dGMP reduces the binding affinity for phosphate of the same dGMP molecule by a factor of 5 to 6. Much the same factor is expected to apply to other metals containing agents interacting with dGMP.     

Development of a Microsphere-Based Immunoassay Authenticating A2 Milk and Species Purity in the Milk Production Chain

Processed milk and milk products produced from bovine milk, commonly contain β-casein A1 (βCA1) and β-casein A2 (βCA2). Since the presence of βCA1 is linked to milk intolerance and digestion problems, A2A2 milk, which only contains βCA2, is proposed as a healthier alternative. To support this health claim, the purity of A2A2-milk has to be guaranteed. In the presented study, a multiplex immunoassay, able to distinguish between βCA2 and βCA1, was developed and real-life applicability was shown on raw milk samples from genotyped A1A1, A1A2 and A2A2 cows. Because of its ability to discriminate between βCA2 and βCA1, this newly developed method was able to detect the addition of common bovine A1A2 milk to A2A2 milk, as low as 1%. Besides the detection of A2A2 milk purity, the developed assay can also be implemented as a rapid phenotyping method at dairy farms to replace the more invasive DNA-based screening. Additionally, the developed method was capable of detecting the addition of common bovine milk up to 1% in sheep, goat, buffalo, horse and donkey milk, which conforms to EU recommendations. In conclusion, a newly developed multiplex method capable of reliably detecting the dilution of A2A2 milk of multiple species, with common bovine milk up to 1%, is presented.     

Mono- versus bis-chelate formation in triazenide and amidinate complexes of magnesium and zinc

Magnesium and zinc complexes of the monoanionic ligands N,N'-bis(2,6-di-isopropylphenyl)triazenide, L1, N,N'-bis(2,6-di-isopropylphenyl)acetamidinate, L2, and N,N'-bis(2,6-di-isopropylphenyl)tert-butylamidinate, L3, have been synthesized, but only L3 possesses sufficient steric bulk to prevent bis-chelation. Hence, the reaction of L1H with excess ZnEt2 leads to the isolation of (L1)2Zn, 1; L1H also reacts with Bu2Mg in Et2O to afford (L1)2Mg(Et2O), 2. Similar reactivity is observed for L2H, leading to the formation of (L2)2Zn, 3, and (L2)2Mg, 4. The reaction of L2H with ZnR2 may also afford the tetranuclear aggregates {(L2)Zn2R2}2O, 5 (R=Me) and 6 (R=Et). By contrast, the tert-butylamidinate ligand was found to exclusively promote mono-chelation, allowing (L3)ZnCl(THF), 7, [(L3)Zn(micro-Cl)]2, 8, (L3)ZnN(SiMe3)2, 9, (L3)MgiPr(Et2O), 10, and (L3)MgiPr(THF), 11, to be isolated. X-ray crystallographic analyses of 1, 2, 3, 4, 5, 6, 8, and 10 indicate that the capacity of L3 to resist bis-chelation is due to greater occupation of the metal coordination sphere by the N-aryl substituents.     

Elimination mechanisms of Br(2)+ and Br+ in photodissociation of 1,1- and 1,2-dibromoethylenes using velocity imaging technique

Elimination pathways of the Br(2)(+) and Br(+) ionic fragments in photodissociation of 1,2- and 1,1-dibromoethylenes (C(2)H(2)Br(2)) at 233 nm are investigated using time-of-flight mass spectrometer equipped with velocity ion imaging. The Br(2)(+) fragments are verified not to stem from ionization of neutral Br(2), that is a dissociation channel of dibromoethylenes reported previously. Instead, they are produced from dissociative ionization of dibromoethylene isomers. That is, C(2)H(2)Br(2) is first ionized by absorbing two photons, followed by the dissociation scheme, C(2)H(2)Br(2)(+) + hv→Br(2)(+) + C(2)H(2). 1,2-C(2)H(2)Br(2) gives rise to a bright Br(2)(+) image with anisotropy parameter of -0.5 ± 0.1; the fragment may recoil at an angle of ～66° with respect to the C=C bond axis. However, this channel is relatively slow in 1,1-C(2)H(2)Br(2) such that a weak Br(2)(+) image is acquired with anisotropy parameter equal to zero, indicative of an isotropic recoil fragment distribution. It is more complicated to understand the formation mechanisms of Br(+). Three routes are proposed for dissociation of 1,2-C(2)H(2)Br(2), including (a) ionization of Br that is eliminated from C(2)H(2)Br(2) by absorbing one photon, (b) dissociation from C(2)H(2)Br(2)(+) by absorbing two more photons, and (c) dissociation of Br(2)(+). Each pathway requires four photons to release one Br(+), in contrast to the Br(2)(+) formation that involves a three-photon process. As for 1,1-C(2)H(2)Br(2), the first two pathways are the same, but the third one is too weak to be detected.