双功能数字散斑干涉位移及空间梯度同时测量

为了满足无损检测中复合材料在复杂载荷下多参数变量评估的需求,提出了一种基于光路复用的双功能数字散斑干涉系统,能够同时实现数字散斑干涉和数字剪切散斑干涉测量功能.通过控制其中一个反射镜-波片组合,当该组合离位时,构成数字散斑干涉测量光路,实现离面位移测量;当该组合在位时,构成数字剪切散斑干涉测量光路,实现离面位移空间梯度的测量.测量过程中只需简单切换该组合的位置就可以实现单次加载下被测物体表面离面位移及其空间梯度的同时测量.该系统光路结构简单、切换效率高,能够同时获得高质量的位移及空间梯度测量结果.实验证明,双功能数字散斑干涉系统既具备高抗干扰能力,又具备高灵敏度测试能力,适合复合材料无损检测现场使用.     

数字剪切散斑干涉法研究铝合金中Portevin-Le Chatelier带的离面变形行为

作为Portevin-Le Chatelier(PLC)带的重要特征之一,其离面变形仍缺乏实验研究.本文提出使用数字剪切散斑干涉法研究GB6061铝合金中PLC带的离面变形.通过图像相减得到的条纹图,实时观察了PLC带的几何形貌和传播过程,并获得了PLC带离面位移分布.在1/15 s内,PLC带的最大离面位移为245 nm,位置偏向于PLC带传播的前沿.在条纹图中,PLC带传播前沿的亮条纹始终较窄.此外,实验还观察到PLC带位置变更和倾角转向的演化过程.实验表明,数字剪切散斑干涉法具有高灵敏度和防震性,是研究PLC带离面变形简便有效的方法.     

双目视觉DIC测量系统的离面位移测量精度

采用离面位移测量精度达到10 nm~20 nm的电子散斑干涉测量系统验证了双目视觉数字散斑相关测量系统的离面位移测量精度。分别用电子散斑干涉测量系统和双目视觉数字散斑相关测量系统同时测量了平板离面位移,并对所测量的位移最大值进行了分析处理及比较。结果表明,双目视觉数字散斑相关测量系统的物体离面位移分布云图与电子散斑干涉测量系统的结果基本相同,且两者位移均方根相差为2.76 m~3.56 m,相对误差为4.59%~7.60%。因此,当被测量物体的离面位移大于4 m时,双目视觉Q400测量系统精度可达到电子散斑干涉测量系统的精度。     

零相关位相板准远场应用的数值研究

对零相关位相板匀滑准远场散斑的特性进行了数值模拟,并与使用随机位相板(配合二单元 偏振控制板)的情形进行了比较.结果表明,尽管零相关位相板是针对入射场为平面波和作为 远场应用而设计的,但在准远场应用中,当离焦距离不超过0002355λf²/d2,入射场的振幅随机起伏不超过10%和位相随机起伏不超过λ/2０的情况下,其 散斑的光强起伏仍明显低于采用随机位相板的情形.因而,零相关位相板在准远场应用中仍 能有效地匀滑散斑. 关键词： 零相关位相板 准远场散斑匀滑 激光聚变     

用于多参数同时测量的散斑干涉仪

本文描述了一种新的散斑干涉仪,它可以同时对表面应变物体的面内位移、离面位移、位移梯度和莫尔曲率进行测量;由于利用了取向滤波方法,在滤波系统输出平面同时得到了与这些参数对应的散斑条纹.还利用散斑空间运动规律较好地解释了散斑干涉与散斑剪切干涉之间的关系.     

离焦散斑技术研究Kirchhoff板在动载作用期的弯曲

本文使用动态离焦散斑技术,测试板的动态弯曲获得成功。并推导了Kirchhoff板动态变形的有关分析,提出了由最大斜率确定材料常数的思想。显然,这是同离焦散斑方法所测数据直接相关的处理手法。     

基于优化电子散斑光谱的三维物体测量研究

用激光光束直接照射到测试表面,再用CCD采其变形前后表面散斑颗粒干涉形成的条纹,条纹图解析为测量点的位移量和变形量,进而得到其离面位移,在优化算法的时候采用π位相技术获取另一个π相移的变形条纹图像,将面内位移与离面位移分离,为了消除零级分量,让投影光栅移动1/2个周期.通过Matlab和四步位相算法给出了三维空间模型,得出变形后物体的离面位移数据.实验仿真数据表明其能够稳定地测量物体变形场三维分量,误差较低.     

离轴非球面在细磨与粗抛阶段的波面再现技术

基于付科法的离轴非球面波面再现检测技术,通过对付科检测过程的数学分析,建立了离轴非球面波面再现的数学模型,提出了波面整合算法,通过对两幅阴影图灰度值积分、去倾斜及波面整合等数据处理再现出被检离轴非球面的波面误差.在被检离轴非球面两个方向的弥散斑分别为0.152mm和0.284mm时,干涉检测得到其面形误差峰谷值为1.110μm、均方根值为0.194μm,且两种检测方法的波面轮廓相一致.实验结果验证了基于付科法的离轴非球面再现技术的正确性,可以应用于指导离轴非球面在细磨粗抛阶段的加工并且实现与精抛光阶段干涉检测的有效衔接.     

部分相干离焦散斑照相的统计理论

运用散斑统计理论，探讨了部分相干离焦散斑照相的统计规律，指出了影响条纹质量的各种因素，并给出了实验验证。     

自动控制的偏转反射镜式剪切电子散斑干涉相移系统研究

通过计算机控制的步进电机驱动反射镜法,研究成功了可控制相移量的相移系统.并利用周边固定、中心加载圆盘进行了实验,实验证明:利用该系统可得到清晰、稳定的剪切散斑条纹,所表达的离面位移导数可以量化表示.实现了离面位移导数场的精确定量测量.     

激光显示中消散斑方案研究

激光显示消散斑问题是激光显示的重要研究课题,是阻碍激光显示真正实用化的一个关键难题。综述了国内外已有的消散斑方案的优劣以及可行性,并重点分析了双屏幕振动消散斑方案。在此基础上,提出了新的三种理论消散癍方案：铁电液晶消散斑,波导扰动光纤消散斑和旋转散射片消散斑。     

内窥式散斑类共聚焦系统层析能力分析

本文研究了内窥式散斑类共聚焦系统(Endoscope-based speckle quasi-confocal system,EBSQCS)的层析能力。从散斑类共聚焦显微镜(Speckle quasi-confocal microscope,SQCM)成像原理出发,详细分析了内窥镜光学结构对散斑类共聚焦显微镜散斑场波动的影响规律,推导了内窥镜光学结构与内窥式散斑类共聚焦系统轴向分辨力的关系。实验测得了基于光纤束的内窥式散斑类共聚焦系统的轴向分辨力曲线。选用放大倍率4倍,光纤直径5μm的内窥镜系统的内窥式散斑类共聚焦系统轴向分辨力曲线的全峰半高是散斑类共聚焦显微镜的2.3倍,与理论计算值相符。实验结果表明内窥式散斑类共聚焦系统具有很好的轴向层析能力。     

高斯型弱散射屏产生的像面散斑场的分布特性研究

弱散射屏产生的远场散斑由一个中央亮斑和一个分布于亮斑周围而与正态散斑类似的散斑结构, 根据弱散射屏远场的散斑图样, 人们假设弱散射屏产生的像面散斑为均匀背景与正态散斑两者相干叠加的结果, 但这种假设与实际像面散斑存在歧异, 基于上述情况, 本文利用4f高通滤波光学成像系统, 研究了高斯型弱散射屏产生的像面散斑场的统计特性, 得出只有表面均方根粗糙度与入射光波的波长相差不多时上述假设才是可行的结论. 关键词： 弱散射屏 f光学成像系统')" href="#">4f光学成像系统 像面散斑     

Assessment of speckle-pattern quality in digital image correlation based on gray intensity and speckle morphology

In digital image correlation (DIC), speckle patterns are generated on the surface of a specimen to resolve uniqueness issues. Thus, speckle patterns significantly affect the accuracy of image correlation. To assess the quality of speckle patterns, the standard deviation of gray intensities within each speckle (SDGIS) is introduced as a new metric. On the basis of the cumulative distribution of SDGIS, speckle-pattern quality measurement (ρ) is proposed, which integrates the features of gray intensity and speckle morphology. Twelve speckle patterns are generated by changing the spraying time and nozzle sizes of an airbrush because these are associated with the speckle volume fraction and speckle size, respectively. In addition, three displacement fields are used to investigate the effects of speckle patterns on the accuracy of the DIC results. For the 12 speckle images associated with the three displacement fields, the correlation results demonstrate that the proposed speckle-pattern quality measurement is inversely proportional to the averaged error of the subset method. This is statistically confirmed by evaluating the correlation coefficient and p-value. Furthermore, the error of the subset method is more affected by speckle patterns than the subset size when the subset size is sufficiently large.     

水下高斯界面背向散射超声散斑场的相位奇异

为了精确描述超声散斑场的特性,提出了采用计算机模拟产生超声散斑场的方法.利用模拟产生的高斯相关随机表面,获得了这类表面远场超声散斑场,同时得到了声强分布和相位分布.与实验产生的散斑场进行对比,建立了超声散斑场接收的实验系统,取与计算模拟相同的参数,获得了实验散斑场.通过对比发现:计算机模拟产生的超声散斑场相位存在奇异点,奇异点周围相位分布类似漩涡,计算机模拟产生的散斑场与实验得到的散斑场强度分布相似,强度值比实验产生的散斑场强度大,携带有用信息的高亮散斑较多,暗点较少,更利于研究和分析.     

A novel method to obtain electronic speckle pattern interferometry fringe patterns with high contrast

Traditional speckle fringe patterns of electronic speckle pattern interferometry （ESPI） are obtained by adding, subtracting, or multiplying the speckle patterns recorded before and after the deformation. However, these speckle fringe patterns are of limited visibility, especially for addition and multiplication fringe patterns. We propose a novel method to obtain speckle fringe patterns of ESPI from undeformed and deformed speckle patterns. The fringe pattern generated by our method is of high contrast and has better quality than subtraction fringe. The new method is simple and does not require more computational effort. The proposed method is tested on the experimentally obtained undeformed and deformed speckle patterns. The experimental results illustrate the performance of this approach.     

Velocity and density field measurements by digital speckle method

Velocity and density field measurements based on image processing of laser speckle or pseudo-speckle pattern have been developed. Laser speckle velocimetry (LSV) or white-light speckle velocimetry (WSV), which corresponds to a high-image-density PIV, gives a local velocity vector map or whole field velocity contour map of a two-dimensional flow field seeded densely with fine particles. This technique has an advantage in high-speed flow measurement without limit of frame rate except for directional ambiguity. New techniques of laser speckle photography and laser speckle interferometry by means of digital image processing have been developed recently for density field measurements. In laser speckle photography, a local density gradient vector map is reconstructed by cross-correlation evaluation between the reference and the object speckle patterns. In laser speckle interferometry, an equi-density contour map is reconstructed by image subtraction between the reference and the object interferometric speckle patterns.     

基于Gabor滤波的散斑条纹图平滑方法

提出了一种基于伽博(Gabor)滤波的散斑条纹图平滑方法.通过加窗傅里叶运算提取散斑条纹图的条纹频率和条纹梯度方向,并利用它们确定具有频率和方向选择性的Gabor滤波器对散斑条纹图进行Gabor滤波.数值模拟和实验结果表明,该方法在滤除散斑噪声的同时能够有效的保留散斑条纹图的条纹结构,为从单幅散斑条纹图中进一步提取条纹相位场奠定了良好的基础.     

Statistical properties of the phase difference between two interfering speckle fields in speckle interferometry

The statistical properties of the phase difference between the two interfering partially correlated and partially developed speckle fields were studied experimentally as a function of the intensity correlation coefficient. The gaussian statistics are assumed for the formation of speckle fields in the diffraction region and the correlation coefficient between the two speckle intensities is used to evaluate the phase difference. The standard deviation of the phase difference can be uniquely determined in the fully developed speckle field from the correlation coefficient of the two speckle intensities. However, it was found in the partially developed speckle field that the standard deviation of the phase difference between the two speckle fields cannot be uniquely determined from the correlation coefficient of the two speckle intensities.     

基于自相关函数的激光散斑统计半径的测量

为了测量激光散斑的统计半径,运用统计光学理论推导了二维近场散斑光强的归一化自相关函数,并提出了通过求解散斑图像自相关拟合函数的系数来计算激光散斑统计半径的一种测量方法,利用该测量方法编制的测量软件可以方便地计算出激光散斑的统计半径.通过对尺寸已知的模拟散斑的测量,测量结果与实际尺寸相吻合,证实了该测量方法的可行性.